Im trying to build Mandrivas theme ia_ora from source but it fails.
Code:
sh install.sh
-- Found Qt-Version 4.7.1 (using /usr/bin/qmake-qt4)
-- Found X11: /usr/lib64/libX11.so
-- Found KDE 4.6 include dir: /usr/include/kde4
-- Found KDE 4.6 library dir: /usr/lib64/kde4/devel
[Code]...
I am trying to change plymouth theme. but when I try to change it using plymouth-set-default-themeI am getting this/usr/lib64/plymouth/script.so does not existGoogle did not have much to say either. I am using F14 KDE spin.y plymouth version is .8.4-0.20100823.7
View 2 Replies View RelatedI'm trying to build a KDE program from source. I have installed the qt3-devel.i686 package. When I try to configure, I receive this error message
Quote:
checking for KDE... configure: error: in the prefix, you've chosen, are no KDE headers installed. This will fail. use another prefix!
Anyone know how I can build KDE programs in Fedora?
I am running Fedora 12 x86-64. I have a SRPM and want to build both x86-64 and i686 package. But the rpmbuild -ba can only build x86-64 package. --target=i686 is not working fine too, it try to find dependency in /usr/lib64. How can I build i686 package?
View 1 Replies View Relatedas I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.
Code:
$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64
[code]....
Getting vmmon module build failure, gcc and kernel headers are installed,
[root@richard-g8jvm rules.d]# cat /tmp/vmware-root/setup-2838.log
Dec 13 12:54:09.521: app-140223614146336| Log for VMware Workstation pid=2838 version=7.1.2 build=build-301548 option=Release
[code]....
I have an init script running as a special build user which performs an automated build that fails with (Too many open files).I updated /etc/security/limits to allow the special user more open files, but that didn't work - the init script still isn't allowed more open files.Here's a demonstration of the problem;
Code:
$ su - sbsbuild -c "ulimit -n"
Password:
[code]....
recently i have been building my own kernels, and have been successful. however, over the last 2 days, using the proper documentation and methods i always get to the same point that rpmbuild fails at. it's very frustrating to say the least...i am somewhat new to fedora, as i tend to use debian-based systems or freeBSD, where the approach and methodology is quite different to that of redhat. the command used:
rpmbuild -bb --with baseonly --with firmware --without debuginfo --target=`uname -m` kernel.spec
this builds the kernel with modules(needed by me) and this is where it fails:
[Code]...
if anyone has fix let me know, i can't update or upgrade rpmubuild without doing so to my whole system, so i hope this isn't a bug in rpmbuild.... i already had to upgrade yum & yum-utils because of a bug that wouldn't let "builddep" work. (come on fedora, this is a standard release, i shouldn't be having problems with yum or with rpm! this is apart of the OS's core isn't it? anyway, if someone who is in the know has a solution
What package do I have to install to build packages from sources? I am trying to build the TrueCrypt package from source.
View 1 Replies View RelatedI'm trying to move an existing webserver from an old machine to a machine with Fedora 12 installed on it. ThSince the version available in the repository is version 2.X I downloaded the source from apache.org and tried to compile it. I ran configure using the default options and it an without any warnings or errors. However when I run make it fails with the following error:
gcc -c -I../os/unix -I../include -DLINUX=22 -DHAVE_SET_DUMPABLE -DUSE_HSREGEX -DNO_DL_NEEDED `../apaci` htpasswd.c
htpasswd.c:101: error: conflicting types for getline
/usr/include/stdio.h:653: note: previous declaration of getline was here
make[2]: *** [htpasswd.o] Error 1
make[2]: Leaving directory `/root/apache_1.3.41/src/support'
make[1]: *** [build-support] Error 1
make[1]: Leaving directory `/root/apache_1.3.41'
make: *** [build] Error 2
what the problem and more importantly the solution to this problem is?
I have tried to install PHP 5.2.9 with some libraries (libjpeg, libpng, libiconv, libmcrypt, magickwand) on F10. I had resolved some problems linked with setting the flags for the compiler but lastest error stumped me.
The error
/usr/bin/ld: cannot find -lltdl
collect2: ld returned 1 exit status
make: *** [libphp5.la] Error 1
I tried relinking the libltdl.so.3 but I still got this error.
I had no problems up to the newest kernel version. But for 2.6.40-4 akmods fails to build the kmod with the following error:
Code:
Building RPM using the command '/usr/bin/akmodsbuild --target x86_64 --kernels 2.6.40-4.fc15.x86_64 /usr/src/akmods/VirtualBox-OSE-kmod.latest'
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/akmodsbuild.yob64XwN/BUILD/VirtualBox-OSE-kmod-4.0.4/_kmod_build_2.6.40-4.fc15.x86_64/vboxnetflt/vboxnetflt.mod.o
LD [M] /tmp/akmodsbuild.yob64XwN/BUILD/VirtualBox-OSE-kmod-4.0.4/_kmod_build_2.6.40-
[Code]...
I need to run a proprietary VPN client (Aventail) that can't use the openssl libraries that are packaged with 64bit F10:The Fedora openssl package does something differently from the original openssl.org package that makes it incompatible with Aventail (see bugzilla ticket 477073) I also believe the Aventail client software requires 32-bit libraries. So, I've determined I need to install 32bit openssl directly from openssl.org, then link my Aventail client to that. Note that I don't want to replace the 64bit openssl libraries currently on my system.
Based on the Bugzilla ticket, I believe I know how to hook up Aventail before I install it simply by supplying a few specific soft links if I can make/compile/whatever the 32bit openssl.org libraries and keep them in their own isolated directory. how to get the 32bit openssl libraries installed in a little corner by themselves on my 64bit system. give a step-by-step on on the commands necessary to place a 32bit version of openssl all by itself in a directory of my choosing?
strace wget www.google.com:
...
write(2, "Connecting to www.google.com|74.1"..., 51Connecting to www.google.com|74.125.115.104|:80... ) = 51
socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3
[code]....
I've just installed Fedora 11, and in the process of testing it, decided on trying out virtualization tools.
Services: libvirtd, xenner and xend are started and i'm still unable to connect to hypervisor with the message:
Unable to open a connection to the Xen hypervisor/daemon.
Verify that:
- A Xen host kernel was booted
- The Xen service has been started
Unable to open connection to hypervisor URI 'xen:///':
<class 'libvirt.libvirtError'> unable to connect to 'localhost:8000': Connection refused
None
xend.log is empty
Now, I've also tried installing Fedora 11 x86_64 as a guest OS with KVM/QEMU as a solution, and the installation process starts, but after some time, the console screen goes black and there is no DVD driver activity or HDD led activity. The CPU is at 2-5 % utilization. And there is nothing I can think of to 'resume' the installation or whatever.
[Code].....
Now, I've tried the same thing 3 times and the process always hangs during the installation with the same symptoms.
I have both gtk2.i586 and gtk2.x86_64 installed and now when I try to update, I get the following error..:
Code:
How do one resolve such a conflict in Fedora?
I'm using a Lenovo B450 laptop with Fedora 14 x86_64. The laptop has a Atheros AR5001 wireless adapter and is identified at lscpi.
Additionally lspci reports that the kernel driver in use and the kernel module for that device is ath5k.On a fresh install of Fedora 14, the NetworkManager applet seem to behave well at enabling and disabling wireless (remember the "Enable Wireless" checkbox). Though wireless was always at disabled state at every boot time, even if it was enabled at the toggle button on the laptop. Now that, after I have fully updated the system (yum -y update), I'm unable to enable wireless. Clicking on the "Enable Wireless" menu item on the NetworkManager applet has no effect, and I've a confirmed report that the update broke this functionality (I reinstalled F14, and then it was working, full system update broke the function).After the update, the kernel version is 2.6.35.10-72.fc14.x86_64 and the NetworkManager version is 0.8.1-10.git20100831.fc14.x86_64.
I just tried to update to kernel 2.6.27.15-170.2.24.fc10 (x86_64) at the suggestion of the gnome update widget, and the process hung. A bunch of other things were updating at the same time, many of which were related to audacity or wine.
I'm not sure just what was being updated, because the option to review which updates are available does not work - when I click on it, nothing happens, but when I take the other choice (install all updates), I take pot luck. It would be nice to be able to choose which programs to update, and to be able to upgrade the kernel independently, but I don't seem to be able to do that at the moment.
my update today failed, because the packages raydium and maniadrive depend on libphp5-5.2.9.so, which is provided by php-embedded, which is (apparently) not in the fedora 64bit repository There does however seem to be an i586 version...
View 2 Replies View RelatedAfter the 4th install The printer will at least produce a test page, but the available resolution is low, I suspect I need the gutenprint enhanced drivers, printer is a EPSON R285. Where do I find the nvidia libs so I can use the Nvidia driver for my ancient 8500 GTX. Using the package manager find nvidia shows nothing.
Are these libs held on another repo, as in other distros?, and is Acroread availble? is there a listing if the repos somewhere, I have some apps that have to be compiled and are a pig to get going, due to using those funny cut down libs that ubuntu use. When I backed up the last failing version of FC13, which hung as soon as yum was started, didn't print ect, I didn't close firefox down before copying the file. So the user config is locked, ie, you get firefox is already running, and fails to start. I found parentlock and deleted it, but but there is another lock file that needs to be removed, and I can't find it.. Anyone know the location of the lockfiles for firefox.?
I am trying to install form source (gnome-voice-control-0.4.tar) the voice recognition tool. ./configure seems to go fine, the Makefile has been made bur when I try to install by typing make some errors appear.
code:
Quote:
[root@piotr gnome-voice-control-0.4]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes[code].....
1) How to build a rpm from source?
2) How to install an rpm without dependencies using
(i) rpm (ii)yum
I run Debian Squeeze on the powerpc architecture and I'd like to install the newest Iceweasel on it. The Debain Mozilla repo only has binary packages for i386 and amd64 but provides sources.
So I did: apt-get source iceweasel
which resulted in the creation of these files/directories:
iceweasel-5.0/
iceweasel_5.0-3~bpo60+1.debian.tar.gz
iceweasel_5.0-3~bpo60+1.dsc
iceweasel_5.0.orig.tar.bz2
[Code]....
I tried to build VLC from source and stuck up with the following error.
configure: error: Package requirements (fribidi) were not met:
No package 'fribidi' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables FRIBIDI_CFLAGS
and FRIBIDI_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
[Code]...
I'm looking for a repository for amarok 2.3 or a howto on building from source.
View 5 Replies View RelatedI experience the following issue with Ubuntu 10.10 x86_64, kernel 2.6.32-25-generic: When I login after having logged out, the theme is reset from Radiance to a quite coarse one withs grey folders and very basic icons. System|Preferences|Appearance->Theme tab just considers it Custom. No change to window borders, and trying to change the theme just affects the borders. Does not happen on a Ubuntu 10.10 32 bits installation.
View 9 Replies View RelatedI am on Ubuntu 10.10 64-bit version (Gnome). I am running an NVIDIA GeForce 9800 GT graphics card with the NVIDIA proprietary drivers. I have dual screens running at 1920x1080. I am dual booting with Windows 7 but I don't think that should make a difference (BURG is my bootloader). When I first boot up into Ubuntu and log in, my desktop looks just great, like this:
But if I log out then log back in, my theme reverts to a grey blockish theme that seems to be reserved so weak video cards or something like that. I'm somewhat new to Ubuntu desktop. This is what it looks like:
I've got myself and Android phone, and I'd like to be able to compile from source ON my phone (I want to be able to run some command line tools like eyeD3, lame, etc.). Problem is, how do I get GCC on my phone with such limited resources? The Android platform isn't exactly meant for developing on. Another option would of couse be compiling on my PC using a cross compiler, but I'm a newb when it comes to that
View 1 Replies View RelatedI have downloaded whole linux source codes of fedora in a dvd. There are several rpm packages and lots of directories in it. I want to load all source codes to version control system (svn or cvs) which is loacated in a server and develop it step by step .During this time I want to build my own distribution. So I need to know how to build all these packages at once. Is there anyone who can explain "how to do" to me
View 1 Replies View RelatedI have run into problems building GNOME Shell from source on the Lucid Lynx. The Lynx has GNOME 2.30, correct? Well, ~/gnome-shell-build-setup.sh tells me that "GNOME 2.26 or newer is required to build GNOME Shell" when I already have 2.30. Just look at this screenshot [URL]...
View 1 Replies View Related