Ubuntu Security :: Encrypts On WebDAV Share ... Error Message?
Jan 5, 2010
I'm trying to make ecryptfs work on my GMX Mediacenter share (a service quite popular in Germany). I followed the instructions to include my mediacenter share in my fstab which works pretty well. So now I'm able to connect via Secure WebDAV as a regular user (no sudo needed). When connected, I try to create a ecryptfs transparent layer so everything saved remotely is seamlessly encrypted. Although no error message is thrown during creation, the process fails. When entering the remote share (cd mediacenter) and performing any remote command such as "ls -la", the following error message is thrown:
[Code]...
View 1 Replies
ADVERTISEMENT
Apr 30, 2009
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies
View Related
Nov 22, 2010
So here's: sudo apt-get install fusedav
Make a mount location, chown the directory, give yourself permissions.
I put my script in /etc/init.d. I'm sure you could put it anywhere though.
Paste the following in the file.
Make the permissions readable only by root, because it has your password in plain text.
Make it executable.
Make it run at boot.
Reboot and use.
View 2 Replies
View Related
Aug 12, 2011
I want to setup a SSL encrypted WebDAV share on my OpenSUSE 11.4 server that is accessible from the internet. Everything is working fine when using Windows XP or Linux clients, but a connection with Windows 7 is not possible ("the selected folder is not valid").
I already searched for a solution to this problem I tried several setups:
- with and without encryption
- with Basic authentication
- with Digest authentication
- without authentication
I did not have success so far. Is there any solution to this (except not using Windows 7)? Or can anyone confirm that this should be working (and maybe my configuration is messed up)?
View 1 Replies
View Related
Jan 22, 2011
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
View 4 Replies
View Related
Feb 2, 2011
I have a WebDAV folder (complete folder hierarchy in fact) currently managed by SAP's KM module. Long story short: it's in Windows, it's slow, I hate it.
I want to migrate the hole tree to my brand new Ubuntu Server 10.04 with a functional WebDAV server I just finished configuring. It connects to LDAP for user authentication, it's fast, it works like a charm.
Do you guys know any way I can transfer/migrate files from the Windows WebDAV to to Ubuntu WebDAV? The only thing that is important to keep is file security properties. Both WebDAVs have the same user database: our corporate Active Directory.
View 1 Replies
View Related
Jun 24, 2010
I have Samba 3.5.3-61 running on a Fedora Core 13 system. I created a share that is browseable to all systems, and I made sure to create a user account via the smbpasswd utility. When I try to connect to the server from a Windows XP system, I am able to enter the appropriate sharename as well as the username and password.
View 3 Replies
View Related
Jan 13, 2010
My workplace recently switched to Active Directory for our netdisk space (I work at a University in the US). The "only way" (recommended) by our IT department is to use a cifs protocol. I've had absolutely no luck with that at all. However, it turns out that there is secure WebDAV protocol setup which works well on campus. If I'm off campus I have to connect via a VPN connection; our school uses Cisco Anyconnect 2.3.0254. It works well for me to connect to a printer, etc on campus.
Here's my problem: I can't connect to my netdisk space from off-campus using the Secure WebDAV bookmark that was working oncampus, even when I am connected via the VPN connection. I am using UFW. Is there a port I need to open up, or am I missing something else?
View 3 Replies
View Related
Dec 19, 2010
I've just ssh'd into my Ubuntu 10.10 desktop for the first time was confronted this warning message.
Your CPU appears to be lacking expected security protections.
Please check your BIOS settings, or for more information, run: /usr/bin/check-bios-nx --verbose
I've run /usr/bin/check-bios-nx --verbose but this in not present on my install.
From what I understand the -nx option is for AMD processors, however I have an intel i5-750!
View 4 Replies
View Related
Feb 10, 2011
Every time I try to empty the waste bin I get dolphin error - 'The file or folder /.local/share/Trash/files/IMGP1676.DNG does not exist'I tried to recreate the file 'IMGP1676.DNG' , deleted it i.e. sent i to the waste bin and then tried the empty waste bin again, although this time it was there and deleted it still reported the same error.du -h .local/share/Trash/files/ 12K .local/share/Trash/files
View 2 Replies
View Related
May 27, 2010
I've been trying to set up a webDAV server on my remote server and while trying to enable a vhost 'webdav' with the command
Code:
sudo a2ensite webdav
sudo /etc/init.d/apache2 restart
[Code]....
View 7 Replies
View Related
Jul 9, 2009
Is it possible to change the general permission denied error. I have some rather young users on this system that think they can "hack the gibson" and I would love to change the general error message to something a little more rude/funnyex:# cd restricted area
-sh: cd: restricted area: Permission deniedI am curious if its possible to change the error message in general?ex:# cd restricted area-sh: cd: restricted area: (funny/rude message goes here)Quick info:This is a Gentoo 2008.0 system, I would also love to do this on my slacware and OpenBSD boxes as well just for kicks.
View 2 Replies
View Related
Nov 25, 2010
I use iptables firewall (v1.4.1) installed on FC8. I'm trying to limit the inflow traffic for the port 1723 to certain MAC addresses. To experiment with the mac option, I've written the following iptables rule:
Quote:
iptables -A INPUT -m -mac --mac-source 10:08:08:08:08:10 -j ACCEPT
It didn't work. It gave me this error message:
Quote:
iptables v1.4.1: Couldn't load match `-mac':/usr/local/libexec/xtables/libipt_-mac.so: cannot open shared object file: No such file or directory
Try `iptables -h' or 'iptables --help' for more information. Does that mean the mac module wasn't installed/enabled?
View 4 Replies
View Related
Sep 5, 2010
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies
View Related
Jan 15, 2010
I've just installed Ubuntu 9.10 and Samba 3.4. I've shared a folder and have accessed the share from a Windows 7 client. However, I've struggled to configure the share and folder so that the Win7 client can create files and/or folders in the share. Kept getting Permission Denied errors. Finally, (using Webmin) I set the permissions on the file folder so that "Other" had write access. I don't understand why this was necessary (and how unsecure this is). I already had the write access checkbox ticked for "User" but it wasn't enough.
View 1 Replies
View Related
Apr 28, 2011
equivalent of "force_user" when sharing with nautilus-share? To put this question into context, I have shared out a folder with "Allow others to create ..." and "Guest Access ..." turned on via the GUI (I believe nautilus-share is applicaition behind the GUI). When Guest accounts create files or folders, I want the owner of the files or folders to be a specific user, rather then "nobody". In a Samba Server, I know you can use the parameter "force_user" in the smb.conf (under an individual sharename) which will specify the owner of the files and subfolders created through the share.
I have tried to add this parameter to the files created in /var/lib/samba/usershares but the owner of the files and folders are still "nobody" (NOTE: I rebooted the PC after making the change to the file) I have just done a fresh installation of Ubuntu 10.10 Desktop with nothing else installed (except the current Updates and the necessary components needed when sharing folders) As a follow on question, I also want to set the permissions for files and folders. To replicate what the "create_mask", "force_create_mode", "directory_mask" and "force_directory_mode" parameters do within a Samba Server.
View 1 Replies
View Related
Jan 22, 2011
I need a single user ftp server on a dedicated machine which encrypts passcode transaction (and preferably everything else) and logs attempted entry. Assume forwarding port stuff / DMZ stuff is already setup.
connecting client will be either command-line tools or winscp, depending on client OS.
View 2 Replies
View Related
Dec 31, 2010
Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
View 4 Replies
View Related
Nov 10, 2010
Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies
View Related
Mar 19, 2010
I've got a samba share on a linux server, connecting to it with a windows 2k3 server via tools > map network drive. The goal is to be able to use windows to change the security of the samba share. The good news is it works! The bad news is it's not QUITE perfect:
The share is called /company. I started with the following to give everyone access to everything, set the owner of the share to administrator (my domain admin on the Windows domain), and set the group owner to domain users (group that everyone on the domain is part of):
Code:
chmod -R 777 /company
chown -R administrator /company
chgrp -R domain users /company
I then mapped the drive as a regular user, and of course, can access/modify/delete/rename/create anything I want. Then I picked a folder to lock down. Let's call it /company/myFolder. I did this on the Windows server by mapping the drive as administrator (the owner), right click > properties > security tab > advanced > highlight "domain users" and "everyone" and click edit > clear all (i.e. remove all access). Go back to Linux and
[Code]..
The only issue that remains is that I am able to rename/delete "myFolder" as a regular user. I thought this was coming from the "acl map full control = true" parameter in smb.conf, but I changed it to false and verified the change and it still happens. If I remove group and world write access to /company, I am no longer allowed to rename/delete myFolder, but then I can't create a new folder. If I add group write access back in I can create files but can also rename/delete folders within /company that have --- specified for group access. Any ideas what I need to tweak to make this right?
View 1 Replies
View Related
Feb 21, 2010
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies
View Related
Oct 23, 2010
[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
View 3 Replies
View Related
Nov 24, 2010
I'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
View 1 Replies
View Related
Jul 3, 2009
I'm having trouble connecting to my freenas server.
It's part of my windows network and when I try to connect to it,I get this message: Unable to mount location,Failed to retrieve share list from server.
Is there something I need to enable on the server or my OS(CIFS or something)?
View 1 Replies
View Related
Sep 1, 2011
I was trying to install ubuntu restricted extras, and for some reason this popped up in the terminal. Edit: Quote Removed That exact message come up in the terminal. What to do?
View 8 Replies
View Related
Nov 5, 2009
I have Ubuntu Jaunty & Linux Multimedia Studio 0.4.2. In attempt to update to LMMS 0.4.5, I downloaded & attempted to install : lmms_0.4.5~ppa-1jaunty_i386.deb and got the following error message : Error : Dependency is not satisfiable : lmms-common (=0.4.5~ppa-1jaunty). What went wrong and is there an easier way to update ? Also, should I remove the older version or just install the latest on top of it ?
View 5 Replies
View Related
Feb 20, 2010
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies
View Related
Jan 28, 2011
When I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies
View Related
Oct 12, 2010
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies
View Related
Mar 21, 2010
Something go wrong with php and Apache, at first, the $GLOBALS array is looking like this
Code:
Array
(
[code]....
View 2 Replies
View Related
