My Ubuntu server has been serving me well for the last couple of months, now I wish to use it as a back up service for my family. I have installed a 2nd hard drive, formatted it and put several folders on it; but I cannot give permissions for other computers to access these folders. Note that I can see the folders via Samba but it keeps telling me that the permissions are incorrect. I have tried to change the permissions of the hard drive but they simply 'correct' themselves (I change it to anyone can 'read and write', it then changes it straight back). All the folders have full permissions for guests.
I have a Windows machine and a Linux machine with currently no hard drive. I have 250 GB external USB hard drive that I use on Windows with about 50GB of files on it. I want to install Ubuntu on it and share between Windows and Linux. I have Ubuntu on a CD that allows me to run Linux on the Linux machine. When I try to install Ubuntu on the external hard drive (from the Linux machine) it indicates that it will allocate about 98 GB for Ubuntu and 150 GB for files (with 50 GB of existing files). Then it says something about partitioning something (I think) that might take a long time. Does this mean that Ubuntu will take up all the free space on the hard drive? Does it also mean that when I connect the hard drive to the Windows machine, it will see two partitions when previously there was only one?
Initially when I shrunk my NTFS Windows partition to install Fedora 11 I underestimated how much space I'd need for Fedora. Now that I'm using it as my primary operating system I have wasted space in the form of spare space on my NTFS partition. I was just wandering how safe it is to shrink this partition and move the free space to my /home partition using gparted on Linux? This would probably involve having to shift things towards the beginning of the drive as the Windows partition is at the beginning and the /home directory is at the end. Would I need to use a LiveCD to do this since it's meddling with an active operating system? I know I should back up the data, but is it quite safe to do it despite gparted in all likelihood having to move data from block to block across the drive?
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
I recently upgraded the latest ubuntu 11.04. I need to map my shared drive from windows7 to ubuntu 11.04. In precious ubuntu versions there was an option called "connect to server" to map a shared drive. How can I do that in ubuntu 11.04
i have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb
I just booted one of my computers from a usb drive I had installed Ubuntu 10.04 LTS to, and when I booted it up on that computer, it worked fine. Then, when I powered down the computer and booted it back up to the main hard drive, it booted to the same that my flash drive was running, but my flash drive was not plugged in!! How is this possible? Did it copy itself over my other operating system? There is no trace of it. By the way, that, too, was ubuntu 10.04.
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I have a hardisk shared on my windows machine. And I would like to be able to access this on my opensuse notebook. Just cant figure it out. Dont have much experience in opensuse. I just need to know the best way to do this. Also, can opensuse read/write NTFS? Also I have a printer on my moms machine that runs XP home. The printer is shared I would like to be able to print but its no biggie. It some type of HP 3 in 1. I just wnat it to print, I dont care about the scanner and stuff.
I am trying to move a whole bunch of files from one partition on one hard drive to the same partition on another hard drive. Can I mount the same partition (same name, different drives, i.e. /data on /dev/hda1 and /data on /dev/hdb1)and copy those files? Shutdown the server, take out /dev/hda1 and boot up with the new drive and it's /data contents.
This is a USB shared drive, with an ext3 partition. The partition is located at /dev/sdb1. I use Samba to share /media/tiga1000/samba/public, and everyone on the network can add/delete files to it. Specifically, this is our media drive, and we upload a lot of pictures to it, since me and my sister are amateur photographers. Under /public/images/camera_pictures/2010, I have 3 directories. 01_january, 02_february, and 03_march. The directory that has been corrupted is 03_march, and when I say corrupted, I mean that I cannot open it. It acts as a unknown file type that can't be opened.
Here is the file properties of it: Code: drsmall@mycroft:/media/tiga1000/samba/public/images/camera_pictures/2010$ ls -lah total 960K drwxr-xr-x 4 nobody nogroup 4.0K 2010-03-11 21:22 . drwxr-xr-x 5 nobody nogroup 4.0K 2010-02-18 20:19 .. drwxr-xr-x 14 nobody nogroup 4.0K 2010-01-31 11:57 01_january drwxr-xr-x 10 nobody nogroup 4.0K 2010-02-23 15:47 02_february -r--r--r-- 1 nobody nogroup 938K 2010-03-11 15:46 03_march
How I should go about recovering it. Somehow it lost it's directory switch. Should I unmount the drive and run fsck on it? I would like to be able to recover these images, if it is at least possible!
There is a shared drive (on a Samba server using Solaris, I guess) on a machine in our network. In windows, in order to access it I had to map the network drive by providing it's URI (http://blah.domain.com/dir1) and a username and password. How do I achieve the same thing in Ubuntu? While a terminal based solution is all I need.
I have ubuntu server acting as a router installed on a 60 gig drive, i'd like to use that drive in another machine and replace it with a 5 gig drive. how can i transfer from the 60 gig drive to the 5 gig drive?
I am soon going to have to return my intel ssd for replacement. Therefore, I am going to be cloning the 160gb drive to a 320gb drive to keep my system settings while I am waiting for my new drive. I will not change the size of the partitions to fill the 320gb drive. I'll just change the grub settings if I absolutely have to. After that, I am going to have to clone the 320gb drive back to the replacement 160gb drive. Am I going to have problems doing that since I will be going from a larger to a smaller drive?I typically use Clonezilla with the default settings.
I want to load ubuntu on my home pc. I have two hard drives but not have enough dvd's to back everything up on #2 hard drive. If I load ubuntu on drive 1 can I get in two drive two?
I have an external HD attached to my desktop and setup as a shared resource. I want to be able to access it from my laptop as well. After much trying and drinking, I ended up with this in fstab:
//crackbox/seagate /seagate -o
then began giving me an error about not recognizing the file system type. I've been reading everything I can find and trying to get it to work, and have come up with very little. My fstab now contains this line instead of the above:
[code]...
Now, when I reload fstab with "sudo mount -a", I get this output:
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
All my windows PC's show the Linux computer in the network -but that's it. No sign of anything on the Linux computer. I built a Linux box, two drives. Linux OS on first drive, Second drive (320MB) is one FAT32 partition. Mount point for second drive is /mnt/windows. I set it up in Samba as shared with read, write, and browse all set to "yes".
From other computers connected to my router (XP and Vista OS) I can see the Linux computer (Icon shown with the computer name), I can successfully ping it's IP address -but I can't see any drives or directories on it. No error codes, no password requests.In the network neighborhood in windows it shows the Linux machine, but when i click on it, I only get "properties" which does not include any drives or directories.I'm really stuck here -I don't know what's missing in the network configuration or how to troubleshoot this (no error message). How do I get /mnt/windows on the Linux machine visible to the windows computers?
