Since upgrading to 11.04, my screen goes blank if I am not active for 10 mins. This is really annoying if I'm sat on the sofa watching a movie through the computer!
The screensaver is set to 1 hour and the power management settings are set to 'never'. I never had this problem with the previous Ubuntu version. I'm on a desktop rather than a laptop.
Screen is blanking out after x minutes. Don't know how to set it to not do that.
View 14 Replies View RelatedI have been having an issue with my screen blanking out after a few minutes (number of minutes unknown), since I reinstalled Fedora 12 (KDE) a couple of weeks ago. I have tried, yes, a lot of things to try to set it so that it doesn't blank out, to no avail. I have spent a lot of time on the Fedora forum seeking resolution, with a variety of suggestions, all to no avail. I went into System Settings > Power Control, and fooled with things around there and they didn't work. I tried xset and dpms and shutting them off. Still no cigar.
View 9 Replies View RelatedI have the problem (11.3) that the screen is blanked after 10 minutes (console and KDE). After some searching, I found out, it is a kernel "feature". Since it is a server, which should display network status permanently on screen this behavior is fatal.
I have tried:
- switch of power features vie Grub kernel param: apm=off, powersaved=off
- in kde via screensaver options
- in term "setterm -blank 0"
Xorg - Screen Blanking after 10 minutes. Backlight level lower upon return. This is my .xinitrc file:
Code:
#!/bin/sh
#
#~/.xinitrx
setxkbmap "se"
xmodmap -e "remove lock = Caps_Lock"
xmodmap ~/.xmod
xrdb ~/.Xdefaults
xset r rate 200 25 .....
Code:
LIBGL_ALWAYS_INDIRECT=1
INTEL_BATCH=1
pcmanfm --desktop &
compiz --use-root-window --indirect-rendering ccp
After 10 minutes in idle state (watching a video in vlc or in flash counts as idle time too) the screen blanks. As I mentioned in the title, the backlight level is lower when screen turns back on. This is a new feature of the problem, and might be related to a recent upgrade of xorg. Where is the configuration file that handles the screensaver? And why is it even enabled by default?
My screen goes blank for few minutes during booting to print the login page.
When I press ctrl+alt+f1 it shows and hangs at
Enabling /etc/fstab swaps
I show below the output of some commands:
[root@ws-test ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 76G 55G 18G 76% /
tmpfs 3.9G 0 3.9G 0% /dev/shm
/dev/sda3 56G 34G 20G 64% /hdd-1
[Code].....
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View RelatedWhen i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
For some reason my computer screen keeps getting completely dim after around 10 minutes of inactivity. It's been happening when I use Oracle VM Virtualbox to watch movies on Netflix.I have all the setting on my computer so it doesn't dim the screen at all, so I don't know what to do now. You can see my settings on the attached images.
View 5 Replies View RelatedSince upgrading to 11.04, my screen goes blank if I am not active for 10 mins. This is really annoying if I'm sat on the sofa watching a movie through the computer!
The screensaver is set to 1 hour and the power management settings are set to 'never'. I never had this problem with the previous Ubuntu version. I'm on a desktop rather than a laptop.
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies View RelatedThe day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
I fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.
View 4 Replies View Relatedlike any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
I'm using Lucid and after a few minutes of inactivity the system goes into the Lock Screen status also available under the shut down icon. now I don't like the screen to be blocked mainly cause when I get back I've to type again my password everytime. Under Karmic the screen used to go into a sleep status but it only needed a touch of the mouse in order to come back....
View 3 Replies View RelatedI am trying to install ubuntu 10.04 on notebook, after choosing install, ubuntu starts after about 10 minutes with log screen, but I don't know logging parameters. Also the same with ubuntu 9.10. Hardware problem?
View 3 Replies View RelatedI have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
I'm running Ubuntu 10.10 w/ an ATI HD 4350 and trying to output to a CRT television over S-Video @ 640x480. Problem is the screen blanks out after ten minutes no matter how I configure my screensaver or power management settings. I've done some research regarding commands in Terminal, but I can't find anything straightforward.
View 2 Replies View RelatedI have clean installed Ubuntu 10.04. After every 10 min. or so of not moving the mouse, I am asked for my password. How can I extend those short min. to say an hour?? Also, at startup I do not have a splash screen only a black screen for about 1min or so. How can I watch the splash screen at startup?
View 7 Replies View RelatedI have actually done a bit of searching on this, but the suggested solutions either don't work or are not applicable to my setup.First, I changed the setterm link in /etc/rc.d/rc.M to be setterm -blank 0 -powersave off -powerdown 0and have xset s off in my fluxbox startup file.Nevertheless, the screen goes blank after 10 minutes. I can't figure out what is causing it and how to stop it.
View 12 Replies View Relatedi have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View RelatedJust got my EeePC installed with the latest release of ubuntu netbook and have used update manager to get the system to the latest versions including the latest Adobe flash player.
I'm having problems with BBC iPlayer though. When I watch in full screen mode, it only lasts for 10 minutes then reverts back to the Firefox browser.
I have a Dell Vostro 200. Have been running Ubuntu on it for 18 months - no probs. Recently it became very slow to boot. 5-10 minutes before Ubuntu startup screen appears. Have installed Ubuntu 10.10 (on a reformatted hard drive) today. No change. It's fairly certain to be a hardware problem but I don't know where to start.
View 3 Replies View RelatedI've been unable to resolve this problem for the past weeks and have come as far as I can trying to fix it on my own. I have a fresh install of 11.04 on a Shuttle ST20G5 with a Radeon Xpress 200g chipset. After 5-10 minutes of usage in X, it freezes solid (no response to alt-sysreq) and displays a white screen (sometimes with a pattern). I believe it's a kernel issue.
Things I've tried but still resulted in crashes:
- Switching to VESA graphics
- Running failsafe / Recovery Console X
- Downgrading X server to 2.09
- Running latest X server via ppa (at least, I think I did this. Maybe I didn't)
- Upgrading kernel to 2.6.39-0 via ppa
- Running the live cd
I get no warnings or errors of note in xsession-errors or kern.log
I have not been able to catch the error or obtain any troubleshooting info. When it crashes, it just crashes.
I'm using the xfce4 desktop and I removed the default screensaver. The screen goes dim after 10 minutes and I was wanting to know if there is a config file where I can adjust the time.
Searching synaptic for "screensaver" shows xdg-utils installed which has xdg-sreensaver but I'm not sure if that is really the program that is dimming the screen. Anyway, I couldn't find a way to change the amount of time that it takes to do so.
Everything has been working great since January with one exception and that is the power saver mode thingy magig. Whenever I am not using the keyboard or mouse, the screen powers off after 5 minutes. When I am watching a movie. I cannot leave the mouse alone for after five minutes of watching the movie, the screen goes black. I'm not sure if the problem is my Nvidia card or Xorg or what. Any ideas how I can get a hold of this? Let me know what you need as far as diagnostic info. I actually have to leave for about 8 hours so.
View 10 Replies View RelatedMy debian squeeze + testing + unstable came with gdm3.
After setting in /etc/gdm3/daemon.conf:
AutomaticLoginEnable=true
AutomaticLogin=myname
I don't have to type in my username and password on startup. But after a few inactive minutes the screen blanks out, and I have to type in my password now in order to continue. For me hitting any key would be enough. How can I change that?
I have installed UNR 10.10 on an Asus Eee 900. NO matter how I set the power preferences, the screen blacks out after a few minutes of idleness, and to recover I have to enter the password. This is infuriating and there must be some way round it, but I cannot find one.
View 2 Replies View Related