I'm trying to install a program from a CD ISO I have, using an install script on the ISO. I tried to mount the ISO on my desktop and run the script from there, but doing "sudo ./installer" would just give me "command not found". (The file was there) I gave up and burnt a CD, ran fine from there.
But now I need to install this on a netbook with no CD drive! Only the USB to rely on.
how to run the script?
I have an old acer aspire one that the hard drive has been cooked. the computers fine other then that, so what I'm trying to do is run it using 10.10 net book installed(not installer but actually installed) on a usb drive. I've created the installer on another jump drive and installed it onto the 8 gig using the aspire. everything goes fine, it tell me to reboot so i do and all i get is a black screen with the curser.It responds to nothing and never moves.
View 9 Replies View RelatedSystem:
Ubuntu 9.10
Gateway SX2802 (Core 2 Quad)
4GB RAM
750GB drive
Everything was fine for the first 6 months. Now in the past couple weeks, my disk drive is running nearly constantly. I can hear it rattling away in the background no matter what I am doing. Typically, I just have Firefox open, and that disk drive is sounding like it's writing the whole thing over and over.
I've opened the system monitor and looked for something obvious, but everything says, "sleeping". The computer seems to operate fine - no crashes, no odd behavior. What's this thing doing?
I installed Ubuntu 9.10 onto my laptop and then upgraded it to Ubuntu 10.4. I've added some software packages along the way, such as MythTV and several smaller apps, but have not gone crazy in adding apps. I have a 160GB hard drive.I ran out of disk space recording a World Cup game and was surprised. I deleted all of the MythTV recordings and ran Computer Janitor and now I have only about 50GB of free space! It is not my primary computer, so I don't have a bunch of videos, music, pr pictures on it.
I did a clean install of Ubuntu 10.4 to a USB flash drive and it has only 3.7GB occupied on the drive.Any recommendations of why I have over 100GB on the hard drive and any cures on how to clear out unneeded files?
I've been having some problems getting the Ubuntu (9.10 ?) installer to start on my desktop computer. I have created a bootable USB stick using usb-creator (from my laptop), and am able to boot from it on my laptop. However, I get a "Boot error" message on my desktop when I tell BIOS to boot from the USB stick.I'm not sure this is related, but I tried to boot the Ubuntu install CD from my external USB CD Drive, but nothing happened - it just proceeded to boot from my primary hard drive. I have enabled USB boot in the BIOS, but it doesn't list the USB stick as removable media. It lists as a hard disk drive instead. I can't find the external CD Drive on any of those lists.
(Also, the laptop is dual-booting and has grub installed. The desktop has a single OS - WinXP (and hence doesn't have grub installed).. I don't know how this should affect the USB boot though)(I don't think this is a problem with only the Ubuntu installer, but I'd like a confirmation on this)
I have a friend of mines computer that is hosed and gets the BSOD. He has pictures of his grandson on there that her really needs before I fix it. Is there a way to mount the main windows partition while running the Live CD? I have tried it and get an error but I am not able to get it working.
View 5 Replies View RelatedI want to put Ubuntu on my 16 gb USB thumb-drive so that I can use Ubuntu on any computer willing to boot from a USB drive (at my office, my wife's desktop, etc.) I cannot find how to do this. All my search attempts show me how to put an "install disk" onto the USB thumb-drive using the command: System -> Administration -> Startup Disk Creator
I tried the above. The first time I booted from the thumb-drive it asked me whether I wanted to try using Ubuntu from the thumb-drive or install. Having to make that selection with each boot would be a slight pain, but not a deal-breaker. But then the thumb-drive OS detected my laptop's wireless card, asked to install a driver, and then asked to reboot. Now it does some odd blended boot where it skips my hard drive's Grub Loader (so it *is* still booting off the thumb-drive) but goes to my hard drive's account sign-in. How can I make a USB thumb-drive that boots Ubuntu Desktop just as a normal hard drive, with accounts and the ability to install drivers and new software?
I install Ubuntu from an installation of Ubuntu, rather than using the installation CD?Specifically, I have Ubuntu 10.04 installed (and bootable) on an SD card, and would like to install from Ubuntu (running on the SD card) to the netbook's hard drive.
View 2 Replies View RelatedI have been running 10.4 with no problems for some time now. Today when I booted up it started checking the drive for errors, and I just left it to do its thing. I came back to this warning screen: Ubuntu is running in low-graphics mode.Your screen, graphics card, and input device settings could not be detected correctly.
I've tried all of these with no luck. When I select to run to low graphics mode, it says "Stand by one minute while the display restarts...OK".I select OK and then it gets stuck checking for battery state.I try to reconfigure the graphics, and nothing happens when I select any of the options on the next screen.
Does anybody know how to or even if it's possible to create an ISO image (a snapshot, if you will) of an entire volume on a Linux box so that I can use that ISO to burn to a CD use in the future for creating an identical configuation on another box (which would have the same exact hardware)? It is to my understanding that I'd have to first create the ISO file of the entire system and then burn it to a CD and somehow mount it onto the hard drive of the identical-system-to-be.
I'm thinking that I'd have to use the "mkisofs" command but I'm not sure exactly how to do this. P.S. I do not want to use any 3rd party applications.
I just installed Fedora 11 after wiping Fedora 9. Install went very smoothly and I like the upgrades. I am having trouble sharing a second drive. I didn't have this problem in 8 or 9. When I mount the drive under my login, I can't mount it in my wife's and vise versa. Even when I log out as opposed to switching users. This is the drive we have all of our multi media files and other files. So we both need to have access to it. Also I would very much like to share it with my XP laptop. The way I have been moving mp3s is to copy them to a jump drive then copy them the laptop. I had this problem with the Fedora 9 too.
View 3 Replies View RelatedA few sectors on my Hard drive on my toshiba laptop are having issues, so i have to load Ubuntu (9.10 i believe) from a USB drive. Is is still possible to save things, download programs, drivers, and anything so i can still use most of ubuntu's features without everything resetting after a reboot?
View 1 Replies View RelatedI have a home network that includes a couple of computers {A, B, C, D}. currently, I have a cron jon that runs every minute and updates (using rsync) the hard drives of computers {B, C, D} with the contents of hard drive {A}. So far everything works great, as hard drive {A} barely has any information on it. Now, I am about to copy a lot of information (about 8 GBs) to hard drive {A}. Naturally, the cron job will run (as it runs every 1-min) and try to 'sync' the contents with hard drives {B, C, D}.
Given my network (100Mbit/sec), there is no way the cron job will be able to 'copy' the contents to hard drives {B, C, D} in one minute. It will take much more time. Does this situation create a problem? meaning, will cron re-run a new rsync instance 1min later, even though an existing rsync process is running and still copying information to hard drives {B,C,D}? Will my backups be hurt / slowed down tremendously because of this?
My system: Ubuntu 9.10/gnome Gateway SX2802 with Intel Q8300, 4GB ram, 750GB drive only 6 months old. My internal drive is read/writing continuously without stopping no matter what I am doing. It begins immediately after boot. It simply runs and runs nonstop. This is with NO APPLICATIONS running. This is a problem which cropped up suddenly after 5 months of running just fine. What I have tried:
1. Disconnecting Internet - no change
2. Looking at processes in System Monitor. Well, everything says "sleeping" and there isn't anything that looks obvious to me, but there are a LOT of processes. I am afraid my drive will simply burn up.
The disk I obtained from a seller runs fine in live mode (no installation) on my Windows XP. I liked what I saw. However, when trying to run cd live on my Linux PC it won't run. Linux pc currently has Kubundu 9.1 installed. Previous to that I had Mint 8 installed, but again Fedora 12 cd would not run. After getting an initial Fedora startup screen, I next receive a bunch of text, ending with a text screen of about 30 lines with "OK" in green to right of each line. At bottom is blinking cursor. That ends my machine's live running of cd.
Obviously, if I can not get cd to run live on linux pc, I'm not going to be able to install. (I should add that ubuntu, kubuntu, mint 8 and pclinuxos all ran successfully live on machine and three of them were installed successfully.) Perhaps, Fedora is at war with Ubuntu et al.
I have a friend of mines computer that is hosed and gets the BSOD. He has pictures of his grandson on there that her really needs before I fix it. Is there a way to mount the main windows partition while running the Live CD? I have tried it and get an error but I am not able to get it working. Does anyone else know any other tricks I can do to help get my friends pictures of his grandson off there?
View 7 Replies View RelatedI am learning Linux and I am documenting procedures for troubleshooting for any disk related issues and I would like to know the procedure to replace a Failed hard drive running Redhat 5.1 running LVM2.
View 5 Replies View RelatedI am trying to install an ARM version of Ubuntu onto an SD card for a BeagleBoard from a .img file downloaded from http://releases.ubuntu.com/lucid/. I have tried several files of .img and .raw downloaded from several places. I am using 'dd' on a PC running Ubuntu 10.0.4. My question doesn't relate to the BeagleBoard at all since I never get that far. The files for Angstrom that I copy directly onto a formatted SD card boot up fine on the BeagleBoard, but I need Ubuntu on there and can't do it with these image files. The command I use is:
sudo dd if=<the downloaded file> of=/dev/sdb1 After it asks the root password, it chugs along for some time and then gives what appears to be a successful response like the following. (This time it was for the Maverick version of Ubuntu in a .raw file):
leiphasw@dell-linux:~/Downloads/ArmMaverickUbuntu$ sudo dd if=maverick-preinstalled-netbook-armel+omap.raw of=/dev/sdb1
4090632+0 records in
4090632+0 records out
2094403584 bytes (2.1 GB) copied, 167.38 s, 12.5 MB/s
[Code]...
I'm trying to run backtrack from a usb drive on my netbook. Upon loading it, i get "Fatal server error: no screens found".
View 1 Replies View RelatedIt started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
I have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..
View 1 Replies View RelatedI am noticing problems accessing the firewall gui and mounting the second hard drive in my PC running Fedora 13. This is only when I am accessing the machine with VNC. If I am sitting in front of the physical machine, I have no problems at all. I would like VNC to behave more like I am sitting in front of the computer. Is there a way to do this? Thank you in advance for your feedback.
View 4 Replies View RelatedBackground is this: Laptop has an internal h/d (obviously) so I removed it from laptop. Then set Bios to boot from external h/d. Installed Fedora 11 on ext. h/d no swap partition as drive already has 4 partitions. Fedora ran lovely!! I then replaced internal hard drive but left bios to boot from external hard drive. Boot screen for fedora came up, hit enter and fedora started loading. The little balloon started filling up, got to a quarter full and then screen went black. Had to reboot to get going again,same thing happened. Can anybody tell me what may be causing it,i.e. black screen. Fedora boots up and runs lovely with internal h/d removed. Any help very gratefully received. M/c has intel dual core processor, 3 gig of ram.
View 2 Replies View RelatedI currently have a centos 4.4 I believe running with a 250GB hard drive. I want to make an image of that hard drive. I have tried removing the drive and connecting it to my windows pc using an adapter that would allow my windows machine run the hard drive as it was a regular external hard drive. Of course windows doesn't reconize that drive since it is linux partitioned. I am thinking that I need to have the hard drive inthe box I am wanting to copy and put in a blank drive in the box that I want to copy to. And boot from a live CD and use cat or dd to copy it. I have seen the commands before bust I am thinking this is the only way. Basically I am wanting to have a duplicate of the drive and build a whole new server that is already all setup.I will just change the host name and assign it another Public facing UP. Is this correct? Oh, and the new server will have different hardware. Might even be AMD or intel different from source or destination.
View 12 Replies View RelatedI've had a look at some similar threads but as I'm very new to linux they're already a bit technical for me. Sorry, this calls for someone with patience. I gather from other threads that disconnecting an external drive without unmounting is a no-no, and this seems to be the likely cause. Now the disk is read only and I'm unable to change any settings through the usual control panel on ubuntu. I'm just not familiar with the terminal instructions. I tried to cut and past a few command lines from other threads but I got some warnings that proceding could damage data. Like this one: WARNING! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage.
View 5 Replies View RelatedHi. I have Ubuntu 10.04, nm-applet is running in the background, my battery icon and sound icon are showing but my network icon has been missing for the past 2 days. It was working fine before but now it's not. How can I fix this issue if I don't have an ethernet cord? Is there a way to roll back the recent updates or do I need to reinstall my network manager?
I've tried restarting the system and I've tried killing nm-applet and reloading it using Alt F2. I get some Debug error.
When I try to run nm-applet --sm-disable
It says an instance is already running and then gives me a warning.
I tried removing "iface eth0 inet dhcp" from /etc/network/interfaces and then tried restarting by "sudo /etc/initi.d/networking restart"
It says:
What can I do to connect to the internet? I have a flash stick if its possible to download a .deb package on this mac and transfer it over to my other laptop to fix the problem. If its possible.
I can't figure out why but my processor is running at 100% on all four cores, and the fan is running at max speed. All I did was double click an a.out file created by g++, and it is running at full speed now.
[IMG]file:///tmp/moz-screenshot.png[/IMG][IMG]file:///tmp/moz-screenshot-1.png[/IMG]
After "yum install emacs" & "yum install emacs-ess", I was able to install emacs on my X86_64 running Fedora 10.
If I run one session of emacs everything works fine.
Once I start a second session and try to resize or move the emacs window, the system stops responding.
I presume there is something in the JWM window manager - or Puppy Linux Lupu 5.01 itself that is conflicting with the normal loading of GMPLAYER....
I would like to know how to troubleshoot, and fix this problem if possible (even a workaround would be great).
Sometimes I connect to my Debian box from another computer (using SSH on Cygwin or Linux), and once ina while I want to run some console apps. And sometimes some of these apps might complain about "another intance, Error: an instance of newsbeuter is already running (PID: 2496)". Is there a work around for this issue at all(without killing the original instance") ? The reason I do not want to kill the app because there might be 2 users connected to the same machine that might be using the same app.
View 1 Replies View Related