Okay well I have inserted my SD card into my pc.. but ubuntu doesnt seem to be picking it up? It's not showing any signs, i remember it use to show a little icon with the name of the card on the desktop or in the "places" menu but I dont see it.
View 1 RepliesDecided to have a bit of a clean, and moved the computers out the way (unplugged and stuff) to hoover up and that around the floor, but not the inside of the computers.
Now ive put everything back together, my main pc with linux on doesn't detect the wireless card.
I turned it off, then checked the card hadnt been knocked out. It did appear to be, so i put it back in properly, and it still wont detect the card. (its basically a pcie card with an antenna sticking out the back).
It is detecting the wireless networks in the surrounding area but it isn't connecting.
View 11 Replies View RelatedI have loded centos 5 on vertual machine, my host machine is windows xp and has two NIC cards working perfectly well
1) realtek RTL 8139 family PCI fast eathernet NIC
2) realtek 8169/8110 family gigabite ethernet NIC ( ONBOARD)
but both of them are not getting detected by CENTOS
My wireless card isent detecting my router even though it has detected my 3 of neighbors wifi. the only reason i thought that it may not be able to detect mine is that i use a wpa2 encrption rather then a wep like my neighbors. so i tried to go and reset my router using my other desktop and set it to a wep encryption, but for some reason my computer still did not detect it. i am using a dell dimension comnputer with both a linkseys N gigabit router model number :wrt310n and the reciving card linkseysduel band wireless N network adapter model number :wusb600n. can somebody please tell my what i am doing wrong? this is rather annoying as i have to drag my desktop and moniter out to the living room just to physically connect to my router to enable internet.
View 1 Replies View RelatedI have a 64 bit install of Ubuntu 10.04, I was surfing up to 11:30pm EST last night, shut down for the night, upon reboot am unable to connect to the internet or my local network. Ubuntu seems to think that I have no ethernet cables connected.My networking is controlled by my motherboard (Gigabyte P55A-UD4P) and the problem is not on my cable modems side. The modem has multiple wired jacks, all of them are unresponsive with my Ubuntu PC while my roommate can connect to all of them with his Windows 7 PC. Both network cables (the one connecting to his box and the one connecting to mine) are interchangeable: They both work on his and neither on mine, so there is no broken cable.I've followed the troubleshooting in other posts, here are some commonly requested diagnostics:
ifconfig -a
Code:
eth0 Link encap:Ethernet HWaddr 6c:f0:49:53:1f:c0
[code]...
I was here yesterday trying to make my ethernet card(which my rhel 6.0 doesn't detect) works. I initially untar a file that has the driver for my card which i got from atheros. When i tried to run it i.e ./autorun.sh i got the following result:
[Code]...
I am using Ubuntu 8.04 and when I open up my network settings, It shows my ethernet card and my modem but my wireless card doesn't show up. Under "Hardware Drivers" it says that my driver for my wireless card is a "proprietary driver" and that there is no driver I can get for it for Linux. Is there any way that I can get my wireless card to work? I tried going to the HP website and downloading a driver for it, but all of the drivers only work for Windows....
View 2 Replies View RelatedI am using a linux FC-12 machine which is running on 2.6.36 kernel. I wanted to use the USB data card with that machine. But it is not detecting the device. I found that the modules usbserial, option, qcserial were missing. I installed them using "insmod".After that I have removed and reconnected the device. Still the OS is not detecting the device.After the reboot of the machine, again the modules related to USB are missing.
View 2 Replies View RelatedMy ubuntu was working fine till morning but all of a sudden in the evening , its WICD manager stopped detecting my wlan card , because of this it couldn't detect any wireless network.I formatted and installed the fresh copy, but the problem remains the same.Interesting thing is that the same lan card works fine for Win7 OS.Even earlier in ubuntu it was working fine.I have dual boot machine...
View 9 Replies View RelatedI recently installed Ubuntu 9.10 on an old family laptop. It is a Compaq Presario V2000. Everything works perfectly except no wireless networks are recognized, even though I know there are available networks. My network controller is detected but is not doing it's job, which is finding available wireless networks! Using "system testing" I found this out about my network controller:
"Detecting your network controller(s):
Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)"
url
Since the install and original tweaking of F15 the os and pc have been operating flawlessly now for a couple months. Today I slid the Sandisk memory card from my camera in but there is no detection of the stick and no paths in the media link directory. I searched the forum but did not find any post specific to this issue.
View 1 Replies View RelatedHere comes my problem: I am installing a new unit with Fedora Core 5,I will use it as my internet server. I need one additional PCI network card but it is not detected during installation.what shall I do?
View 5 Replies View RelatedI am porting the kernel on my hardware board...dmesg shows that...
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SDHC card at address aaaa
[code]....
I recently installed Ubuntu 10.04 via Wubi (Dual-boot with Win 7; everything went smoothly; was able to install Nvidia drivers, various packages and everything went silky smooth overall. This morning I attempted to log-in to my Profile (on Ubuntu) and I found that my Keyboard would not respond; I attempted to unplug and replug the keyboard back in, restart the computer, everything; yet it will not detect my keyboard.
View 1 Replies View RelatedIn my laptop, ealier in XP OS whenever I was connecting USB Modem, it was giving message "Power surge on USB Hub Port". Now, I have put new hard disk with a single partition and installed Ubuntu 9.04 on it. After installation, it was detecting USB for a day or two and I/net was working fine. But now the system is not detecting USB Modem et al. Is it because of some hardware problem or is there anything that I can check into Ubuntu?
View 2 Replies View RelatedWell I have this really shweet Samson C01U usb studio condenser mic. When it is plugged in before I boot my machine, everything works like a charm, and I can sound like a rockstar recording my stuffs in UbuntuStudio 10.04 x64.But when I'm not being a rockstar, I'm using my normal Lucid distro to go about my everyday tasks. So when I decide to call someone on skype, I plug the mic in, and nothing happens. The sound config window does not show the device? I do not want to reboot every time to use the mic (and that's all that works), and I do not want to leave it standing on my desk either.
View 5 Replies View RelatedMy name is Shim and currently im using Ubuntu 10.4 LTS well currently i've been facing an irritating problem it actually also happened in my previous ubuntu version,well the problem that i've been having is that my system doesn't detect any USBs or external HDs attached to it. I have check around already but still couldnt find any solution to this problem, but i noticed that in other forums they would post their results using the command "dmesg" well here is mine:
Code:
[ 0.182802] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.182805] vgaarb: loaded
[code]...
I have just installed Fedora 14. But my boot loader is not detecting Windows 7, Ubuntu and Debian which I have installed in other partions..
View 6 Replies View RelatedI have Ubuntu 9.10 and Win7 both installed on my desktop. I use Windows for gaming (when I actually have the chance...) Anyway, for some reason update-grub is not detecting my Win7 installation, neither is os-prober. I attempted to add a custom Grub2 entry to point to Windows 7, however, when I select it from Grub, I simply get a black screen with a blinking cursor in the upper-left, after waiting 20 minutes, Windows still hadn't loaded.
Here are hopefully all the relevant files:
sudo fdisk -l
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x059c059c .....
I'm trying to get my friend's laptop(acer travelmate 2200) to connect to his wireless network. I just installed a new hard drive and installed a dual boot windows xp/ Ubuntu 9.04 setup.
His laptop still connects fine with the old hard drive with windows XP installed, so I know the hardware is working.
When I click on the network manager , however, I don't see anything. Normally , I'd just hit the network manager and I'd see the available connections , but on this laptop I'm not detecting any.
The only thing I can think of , is that Ubuntu doesn't have the proper drivers needed for the wireless card in the laptop. But I don't know how to go about checking this since whenever I've done this before it's always just worked automatically.
Obviously I can't install to it if I can't select it from the drop down menu. Not that it really matters, but this happens with both 64 and 32 bit versions, clean disc, no errors. I've also tried xubuntu 32-bit.
I can install Slackware on it, or for all I know every other OS. I can find it with cfdisk, fdisk, gparted, etc. I can format it in windows and use it as a drive If I try to install ubuntu from windows on it once I boot into ubuntu to finish the install it goes in an infinite loop of something like 'no root filesystem please reconfigure (or something like that), hit ok, repeates the message until I get tired of hitting ok and reboot. Always lists it under places as '500gb filesystem' even if there are no assigned partitions on it. I've rebuilt the partition table with fdisk analyzed it with disktest (drivetest? something test or testsomething) I've considered giving up and using another distro...
I'm running Kubuntu 9.10 x64 and have 4GB RAM (as detected by my bios). However, when i run free -m, it reports:
Code:
total used free shared buffers cached
Mem: 3271 915 2355 0 69 333
-/+ buffers/cache: 512 2758
Swap: 7812 0 7812
I have a Lenovo W510 loaded with Ubuntu 10.04 but it does not detect my onboard 3g modem
View 4 Replies View RelatedNot detecting wireless network
View 1 Replies View RelatedWell I have this really shweet Samson C01U usb studio condenser mic. When it is plugged in before I boot my machine, everything works like a charm, and I can sound like a rockstar recording my stuffs in UbuntuStudio 10.04 x64.But when I'm not being a rockstar, I'm using my normal Lucid distro to go about my everyday tasks. So when I decide to call someone on skype, I plug the mic in, and nothing happens. The sound config window does not show the device? I do not want to reboot every time to use the mic (and that's all that works), and I do not want to leave it standing on my desk either.
View 9 Replies View RelatedI have Windows7 installed Oracle Virtual machine. On VirtualMachine i installed BackTrack4. I'm using datacard (India,Reliance ZTE EVDO3.1mbps) for my internet. I'm able to get internet on my backtrack OS via share using NAT. But when i try to use wireshake to trace my data i'm unable to trace the data send from my windows7 OS.
View 1 Replies View RelatedI have a USB modem working in windows. But no luck to connect using Ubuntu 10.04.
I have setup usb-modeswitch and other stuff. The modem is attached to port ttyUSB0. But when i run "sudo wvdialconf" it displays message like this.
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?
read the FAQ at [URL]
If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
I am attempting to install ubuntu 10.10-alternate-i386 that was burned on a cd.
Motherboard: SOYO SY-K7ADA v1.0-2AA1
Main Processor: AMD Athlon 1700+
Primary Master: WDC WD800AAJB-00J3A0 0.103E01
The HDD is brand new and hasn't been formated, partitioned, or previously had any other OS on it. The HDD is recognized in the BIOS.A list of possible drivers are listed in which don't match, except for two, but they don't lead to anywhere beneficial in order to complete the installation process.At this point, I have no idea how I must proceed.
I installed Ubuntu 10.10 on my IBM T60. I want to remove it and install Windows XP due to a lot of compatibility issues. I booted the computer with the windows CD and it said that the hard drive cannot be found.
View 6 Replies View Related