Ubuntu :: No Recognition Of Memory Card In 10.04?
Apr 19, 2011Where can I get the answer to my question. No recognition of my memory card in Ubuntu 10.04.
View 1 RepliesWhere can I get the answer to my question. No recognition of my memory card in Ubuntu 10.04.
View 1 RepliesI have currently gotten my onboard sound working after some tousling and trial (Intel ICH5), but my beloved Audigy remains without breath. I've been around on the KDE forums thinking that it had to do with Phonon after it permanently forgot my sound cards (a feature which enables permanent sound removal too easily, in my opinion), and the admin pointed me toward my distro's forums.
Here's some info:
[code]...
with some meaningful output, but, after a reboot, still no sound with speakers plugged into the Audigy.
2nd NOTE: I have just found this:
[code]....
The driver in use is NOT the emu10k1 driver, which I believe should be the one according to the alsa soundcard matrix. How do I load the proper driver upon boot?
I have two motherboards, MSI-6702 (64 bit single channel) and MSI-7511 (64 bit dual channel), I have two identical D-Link wireless cards and am running Kubuntu 10.10 on both systems. 7511 recognizes both wireless cards and connects to the Internet.The 6702 shows wireless grayed out on the connections page. The built-in Ethernet card has given out on both. I think I disabled it on the first system to have an Ethernet problem and wonder if I need to do it on the second. I would have tried it already but can' t remember how.
View 2 Replies View Relatedam finding that kde device notifier is not seeing my memory card (sdcard) when plugged into the memory car slot on laptop?
Card see the card with fdisk -l
Code:
Disk /dev/mmcblk0: 8015 MB, 8015314944 bytes
121 heads, 42 sectors/track, 3080 cylinders
Units = cylinders of 5082 * 512 = 2601984 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]...
I know this is going to sound stupid, but I have a few 2gb CompactFlash memory cards that I bought to use with my FujiS7000 digital camera. Only problem is that that camera will only read/write to 1gb memory cards. I don't suppose there's any way to format these 2gb cards so that the camera sees them as 1gb cards?
View 6 Replies View RelatedMy Ubuntu 10.04 will not recognize my used cards at all. If it will not recognized them, I cannot format them.
View 5 Replies View Relatedhow do i access the files on my blackberry's memory card? also is there a way to see ALL the files (like the system files and everything) on the phone?
View 3 Replies View RelatedMy new pc doesn't have a cd rom so I have to use a memory stick, usb hard driver or a SD card. So how do I install ubuntu? For some sh'itty reason I got windows vista installed here which is more frustrating then everything else I have tried.
View 8 Replies View RelatedHave downloaded ubuntu (because my linux lite died). Very pleased so far with ubuntu, but I can't figure out how to access files or photos from a memory card. Just can't seem to go to anything that even shows its existence.
View 3 Replies View RelatedI am trying to format 4 GB sd memory using mkfs.vfat. I want to use the card both in linux and windows so I am formatting with Vfat filesystem. When I format the card from command line with "mkfs.vfat -F 32 /dev/mmcblk1" I am getting a warning message like "unable to get drive geometry, using default 255/63" but the data in the card is erased.
But when I mount the card and checks for the size using df -h its showing 1 GB instead of 4 GB. how to format the SD memory card or any other alternate way to format the card.
I have a problem with recognising my mobile phone's memory card in Ubuntu 9.10. When I plug the phone in it starts the mass storage mode, but nothing happens in the PC. I suspect that I may have deleted phone's icon from the desktop, and I don't know how to bring it back. Also the memory card doesn't appear anywhere: nor in the Places tab, nor in Media folder.The phone is Samsung U900 Soul.
View 2 Replies View Relatedsth happened and I cannot sync my nokia 5800 in memory card mode with my laptop. It says sth that certain files or folders are read only. Tried to change permissions but no luck. this is it:
koli@koli-laptop:~$ n
sending incremental file list
sent 7412 bytes received 21 bytes 14866.00 bytes/sec
total size is 11073190 speedup is 1489.73
[Code]....
I bought a micro sd card for my BB 9000 and having a lot of trouble with it. windows as it just doesn't work or maybe it is that the card i bought is faulty? Probably too late to get my money back from paypal now :0(. I did this
$ lsusb
Bus 002 Device 006: ID 0e8f:0021 GreenAsia Inc.
Bus 002 Device 005: ID 17a0:0001
Bus 002 Device 004: ID 04a9:2207 Canon, Inc. CanoScan 1220U
[Code]....
while the BB was connected. And you will see byt the attached pic that the sd card is not mounting. I can't see where the card is now. The file manager did list it but can't remember where. With all the other drives(i have 2 hard drives) but now i can't see it. There is some confusion as to wether the music that the BB software i used via windows put the music on the BB device or the card. Different things say different things. The filemanager on the BB suggests the files are on the card but when i go to add more files i get an error saying the device is full. The device can only hold 1gb of files including installed apps. I probably haven't mentioned everything here as this is doing my head in. I have been battling for weeks with it and i wish i had of known earlier that the card might be faulty so i could have got my money back.
I have my home partition installed on a SD memory card, this memory card was damaged beyond recovery, already bought a new card but i dont want to install the OS all over again.
View 3 Replies View RelatedI am trying to install the game Plants Vs. Zombies from a memory card. I cannot get the game to open. How do you run Plants Vs. Zombies on Ubuntu?
View 1 Replies View RelatedUsing 10.04 Netbook version. I am finding on my Asus EEE 901 that sometimes file copy just seems to freeze - seems to happen usually when copying from the built-in SSD memory to the plug-in SDHC memory card. I have tried reformatting the card and using a different card. It is not just this computer since I found the same thing on my last Asus which was the 900 model.
I am told that there are issues with Nautilus. Is there anything which can be done to improve this or is there anything else which I can install besides Nautilus? I am assuming that there is some issue related to Ubuntu's handling of SDHC memory cards.
It is becoming annoying because it seems to work sometimes and then not. When it happens only option seems to be to turn the netbook off and on again. Even if the file copy is cancelled the card seems to be unaccesible until rebooted.
Also after a certain point it seems that when I try and copy new files to the card, they appear to copy ok but obviously are corrupt in some way - when you try to play videos for instance they are faulty.
recently I stumbled upon the fact you can buy a Sony Ps2 to Ps3 memory adapter which is a USB device that plugs into your PS3. However what I was wanting to know is there a way to mount the PS2 Memory card under Ubuntu via the USB device. Do I need to install a PC/SC card driver as its flash memory or do I need to use CCID?? Is it usbmount or pmount? I am a little clueless how you would get Ubuntu to read & access a PS2 Flash Card. The memory cards are manufactured by MagicGate and they bear this legend on the back; This device complies with part 15 of the FCC rules & regs and the Canadian ICES-003 operation is covered by the following conditions,
1> This device may not cause harmful interference.
2> This device must accept any interference received. Including interference that may cause undesired operation.
The way I look at it is as follows, if these memory cards are now defunct and no longer supported by Sony as such an 8mb memory card makes for a cheap storage method. Especially when people are throwing them away! The Venom adapter's are available on eBay. Let the hilarity ensue, mail your friend's some files on a 8-MB Ps2 Memory Card, then laugh with evil glee when they cant open it.
$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 004: ID 054c:02ea Sony Corp. <-- ah ha!
im new in all this, i already found a lot of drivers for my pc but this is annoying me xD fedora does not recognize sd memory/card
View 1 Replies View RelatedI came across this article, which I found to be very interesting and thought share it with you all.
Graphics CardMemory as swap space or RAM disk.
[URL]
I would like to install fedora onto a memory card 16Gb kingstone SDHC that I use in a ACER aspire one
I followed the instruction on the website and I found the following problem:
The wireless and Ethernet hardware where either not found or, if they were found, they did't work and there were no possibilities to make it work.
The strange thing is that almost every time after I attempted to boot form the memory when booting window as usual, the Ethernet hardware was not found anymore also under window!
My SD card is recognised by OS 11.3 if it is inserted at boot up. If I remove it and reinsert it, the devise monitor states 'no devices plugged in'. This is a problem that I have also had (and reported in these forums) with 11.0, 11.1, 11.2.Now I notice that there is a section for 'removable devices' in the system configuration. But even if I click the box 'enable automatic mounting of removable media' and the sub-box 'automatically mount removable media when attached' the SD card is not remounted, there remain 'no devices plugged in'.
View 9 Replies View RelatedI am new to linux at driver level. I want to read/write at specified memory location in microSD card in linux. I do not want to used SD card with any file system. How to do that. My linux distribution is Fedora13.
View 3 Replies View RelatedA friend of mine asked me to try and recover some photos she deleted by accident on her SD memory card. Normally, I would flip over to my Windows box and do this, but I'm wondering if there is a Linux equivalent to a Windows data recovery program. I'm running Fedora 10.
View 2 Replies View RelatedI am trying to format 4 GB sd memory using mkfs.vfat. I want to use the card both in linux and windows so I am formatting with Vfat filesystem. When I format the card from command line with "mkfs.vfat -F 32 /dev/mmcblk1" I am getting a warning message like
"unable to get drive geometry, using default 255/63" but the data in the card is erased.
But when I mount the card and checks for the size using df -h its showing 1 GB instead of 4 GB. how to format the SD memory card or any other alternate way to format the card.
I'm looking for a way to insert an SD memory card into my computer and have it copy the files from it (a specific directory) in the background while I view the images from the desktop.
View 2 Replies View RelatedLooking for a card reader/writter that will support most current card types. I am running Fedora 12 x86_64. Are there any gotchas, that I need to watch for? Also, Internal vs. external, any benifits of one over the other, or is it just personal preference?
View 2 Replies View RelatedSince the install and original tweaking of F15 the os and pc have been operating flawlessly now for a couple months. Today I slid the Sandisk memory card from my camera in but there is no detection of the stick and no paths in the media link directory. I searched the forum but did not find any post specific to this issue.
View 1 Replies View RelatedIn short: the files in 11.2 of the memory card from my camera were lower case, and in 11.4 they are upper case. Thus, F-spot uploads all the photos again, and I get two copies of each, one low case (old), another upper case (new), without the comments or rotations that I had made. How can I make the system automount it again in lower case? I knew the proper options to do this manually in fstab, but not via udev or whatever it uses.
[Code]...
I recently bought 1GB video card of 'xfx radeon hd 5450'. It came with cd for drivers of windows.
I installed fglrx. Still in ubuntu 10.10 (lucid) I ran: lspci -v | grep -i prefetchable
which shows 256M which is video memory of my ASUS motherboard.
I have problem with my Genesys Logic memory card reader. I'm trying to read SD-memory card. When I put the memory card in to the card reader, nothing happens. Also ls /dev/sd* don't show any new drives/partitions.Here is my dmesg when I put the card in:
Code:
[ 2808.136056] usb 1-5: new high speed USB device using ehci_hcd and address 82
[ 2808.264921] usb 1-5: New USB device found, idVendor=05e3, idProduct=0710
[code]....