sth happened and I cannot sync my nokia 5800 in memory card mode with my laptop. It says sth that certain files or folders are read only. Tried to change permissions but no luck. this is it:
koli@koli-laptop:~$ n
sending incremental file list
sent 7412 bytes received 21 bytes 14866.00 bytes/sec
total size is 11073190 speedup is 1489.73
[Code]....
i am using ubuntu lucid now and using ubuntu for 2years now.except nokia pc-suite i do not miss other s/w for windows.i tried to convert audio and video for using in nokia 5800,but i am not very successful mainly due to my inexperience.i installed winff and ffmpeg and searched a bit in this forum.found a few guides but mostly the converted files shows 'unable to play video or audio' in nokia 5800.
Code:
-r 29.97 -vcodec libxvid -vtag XVID -s 400x240 -aspect 16:9 -maxrate 1200k -b 1200k -qmin 3 -qmax 5 -bufsize 4096 -mbd 2 -bf 2 -flags +4mv -trellis -aic -cmp 2 -subcmp 2 -g 300 -acodec libmp3lame -ar 44100 -ab 160k -ac 2 -async1
this is the example of wiff preset command for nokian810(but not working for me).apparently there is no need for -i or output file(and here i get confused from the command lines posted in the forum.
[Code]....
how to sync contacts, calandar and notes between my Nokia N97 Mini and Ubuntu 10.4 via Bluetooth (or USB).I used some time on 9.10 on this without luck as I was told that the tutorials on this forum did not work on 9.10. Which applications should I use and how should they be configured?
View 1 Replies View RelatedIs there a program to sync my Nokia mobile on Ubuntu? I have Nokia 6233 .
View 7 Replies View RelatedI have been able to sync my Nokia C6-00 using multisync in Ubuntu Lucid 10.04. Thought of sharing it in Ubuntuforums. I have borrowed most instructions from one post for Nokia N95 but do not have the link right now.
1. Install blueman using sudo aptitutde install blueman This installs the bluetooth manager. It should be easy to configure bluetooth support for your phone with blueman menu.
2. To get your C6's MAC address, open a terminal and type:
[Code].....
My client has seen an article about Nokia integrating with microsoft exchange to sync his emails between the office PC, his laptop and his Nokia E90.Naturally enough, I'm not keen to install and setup Microsoft Windows Server with Microsoft Exchange and I'd like to present him with a linux based alternative.
View 2 Replies View Related(Ubuntu Linux server, 64-bits)I was troubleshooting a problem with a file (~3.0 GB) which I had just downloaded, but it was failing the integrity test, when I discovered something really unusual.First this is the MD5 of the file after download, which didn't match the expected value:
~% md5sum media.iso
5d74facb904cc1765a468354908a8f34 media.iso
Some time passes, nothing should have changed the file during this time, but when I went to check the file again:
~% md5sum media.iso
a5b97c5016afb39bd67ccfc3fa6ca59e media.iso
This was really unexpected. Since I have a lot of RAM, I suspected this was the effect of caching and something was going awry with it. I decided to retry with the whole file from disk, for my surprise:
~% sudo sysctl -w vm.drop_caches=3 # This linux command invalidates
vm.drop_caches = 3 # everything in the memory cache.
~% md5sum media.iso
2992aa6270f6e1de9154730ed3beedc1 media.iso
I redid it and now it seems to stay consistent, although this still isn't the value I was expecting. Certainly, the contents in memory cache were different from the contents on disk.This is the big problem.To fix the download, I created a torrent on the source machine and opened it in the target machine. Five 1MB chunks out of ~3.0GB failed integrity check. I used the torrent to fix these file chunks and how the file integrity is ok.The problem now is to determine where the data got out-of-sync.
I tested the memory with memtest86+, all but the bit fading test. I was expecting to see some failing memory module, but there wasn't anything. Everything is ok.Filesystem is Ext4, over LVM2, over a 3-disk RAID5 array.Ext4 is considered stable, and if data were inconsistent between disks, mdadm would have warned. But there is nothing in the logs. S.M.A.R.T. error logs are clean, the disks are new (have less than 30 days of "power-on-hours").I'm looking for information about any data-loss bugs in my current kernel (2.6.35), but there doesn't seem to be anything, as far as I looked.what else I could check, or where exactly could be the defect/bug?It is a Ubuntu 10.10 64-bit, Core i7 930, 6 GB non-ECC RAM.
Update: I confirmed that the files are being correctly written to the disk, the pages are being altered after they are read from disk, while in memory. I did a lot more memtests (I left it doing bit fade test overnight),and still nothing. All memory modules seem ok.Some more tests:
~% md5sum media.iso
cc8bcf1ce67ff7704eadc2222650c087 media.iso
~% cp media.iso tmp[code]....(direcat is a version of cat that reads with O_DIRECT, that is, bypassing page cache)There is a clear pattern: it always happens to the 2nd byte in a 16-byte alignment. In that byte, almost always the bit 4 (LSB) flips to one, but there was one instance where bit 2 flipped to zero.
Given that Nokia have bought Trolltech, albeit quite a while ago now, I still can't see any native QT version of Nokia's software suite for their phones. Are there any plans in the coming year for a Linux version of Nokia's PC Suite software?
View 1 Replies View RelatedI was looking for a way to get the same or similar functionality as the Nokia PC Suite on Ubuntu 10.04. I did find a discussion here [url].
However it is fairly old (2008). I was wondering if it is possible to get more recent information.
In the Ubuntu Software Center I find two applications that seem to fit the bill. I need to know which is better or are the complimentary.
so i can transfer data and stuff
View 7 Replies View RelatedI was using Ubuntu but changed distros recently due to Natty which I found buggy with Gnome. I just don't care for Unity. I have tried Fedora 14, Fedora 15 Beta, OpenSuse 11.4. I am leaning towards Linux Mint.
Except for Ubuntu, my ATI 5800 video card fan is running constantly. I ran the Dell diagnostic on the card. It reported the card was running correctly. It also runs correctly in Windows 7.
I am a semi-newbie and have some confusion as to which drivers to use for my card. Two questions:
Is there a a thread someone can point me to to correctly install the correct driver for any particular distro?;
Is there issues with ATI video card drivers and certain distos?
command line option in ffmpeg to do this
I am told I need the output file to comply with this
Video Resolution: 480*320
Video Bitrate: 768 kbps
Audio Bitrate: 128 kbps
Video Format: MPEG-4 (be sure not to use H264, as it�s not supported in the current firmware)
[Code]....
am finding that kde device notifier is not seeing my memory card (sdcard) when plugged into the memory car slot on laptop?
Card see the card with fdisk -l
Code:
Disk /dev/mmcblk0: 8015 MB, 8015314944 bytes
121 heads, 42 sectors/track, 3080 cylinders
Units = cylinders of 5082 * 512 = 2601984 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]...
I know this is going to sound stupid, but I have a few 2gb CompactFlash memory cards that I bought to use with my FujiS7000 digital camera. Only problem is that that camera will only read/write to 1gb memory cards. I don't suppose there's any way to format these 2gb cards so that the camera sees them as 1gb cards?
View 6 Replies View RelatedWhere can I get the answer to my question. No recognition of my memory card in Ubuntu 10.04.
View 1 Replies View RelatedMy Ubuntu 10.04 will not recognize my used cards at all. If it will not recognized them, I cannot format them.
View 5 Replies View Relatedhow do i access the files on my blackberry's memory card? also is there a way to see ALL the files (like the system files and everything) on the phone?
View 3 Replies View RelatedMy new pc doesn't have a cd rom so I have to use a memory stick, usb hard driver or a SD card. So how do I install ubuntu? For some sh'itty reason I got windows vista installed here which is more frustrating then everything else I have tried.
View 8 Replies View RelatedHave downloaded ubuntu (because my linux lite died). Very pleased so far with ubuntu, but I can't figure out how to access files or photos from a memory card. Just can't seem to go to anything that even shows its existence.
View 3 Replies View RelatedI am trying to format 4 GB sd memory using mkfs.vfat. I want to use the card both in linux and windows so I am formatting with Vfat filesystem. When I format the card from command line with "mkfs.vfat -F 32 /dev/mmcblk1" I am getting a warning message like "unable to get drive geometry, using default 255/63" but the data in the card is erased.
But when I mount the card and checks for the size using df -h its showing 1 GB instead of 4 GB. how to format the SD memory card or any other alternate way to format the card.
I have a problem with recognising my mobile phone's memory card in Ubuntu 9.10. When I plug the phone in it starts the mass storage mode, but nothing happens in the PC. I suspect that I may have deleted phone's icon from the desktop, and I don't know how to bring it back. Also the memory card doesn't appear anywhere: nor in the Places tab, nor in Media folder.The phone is Samsung U900 Soul.
View 2 Replies View RelatedI bought a micro sd card for my BB 9000 and having a lot of trouble with it. windows as it just doesn't work or maybe it is that the card i bought is faulty? Probably too late to get my money back from paypal now :0(. I did this
$ lsusb
Bus 002 Device 006: ID 0e8f:0021 GreenAsia Inc.
Bus 002 Device 005: ID 17a0:0001
Bus 002 Device 004: ID 04a9:2207 Canon, Inc. CanoScan 1220U
[Code]....
while the BB was connected. And you will see byt the attached pic that the sd card is not mounting. I can't see where the card is now. The file manager did list it but can't remember where. With all the other drives(i have 2 hard drives) but now i can't see it. There is some confusion as to wether the music that the BB software i used via windows put the music on the BB device or the card. Different things say different things. The filemanager on the BB suggests the files are on the card but when i go to add more files i get an error saying the device is full. The device can only hold 1gb of files including installed apps. I probably haven't mentioned everything here as this is doing my head in. I have been battling for weeks with it and i wish i had of known earlier that the card might be faulty so i could have got my money back.
I have my home partition installed on a SD memory card, this memory card was damaged beyond recovery, already bought a new card but i dont want to install the OS all over again.
View 3 Replies View RelatedI am trying to install the game Plants Vs. Zombies from a memory card. I cannot get the game to open. How do you run Plants Vs. Zombies on Ubuntu?
View 1 Replies View RelatedUsing 10.04 Netbook version. I am finding on my Asus EEE 901 that sometimes file copy just seems to freeze - seems to happen usually when copying from the built-in SSD memory to the plug-in SDHC memory card. I have tried reformatting the card and using a different card. It is not just this computer since I found the same thing on my last Asus which was the 900 model.
I am told that there are issues with Nautilus. Is there anything which can be done to improve this or is there anything else which I can install besides Nautilus? I am assuming that there is some issue related to Ubuntu's handling of SDHC memory cards.
It is becoming annoying because it seems to work sometimes and then not. When it happens only option seems to be to turn the netbook off and on again. Even if the file copy is cancelled the card seems to be unaccesible until rebooted.
Also after a certain point it seems that when I try and copy new files to the card, they appear to copy ok but obviously are corrupt in some way - when you try to play videos for instance they are faulty.
recently I stumbled upon the fact you can buy a Sony Ps2 to Ps3 memory adapter which is a USB device that plugs into your PS3. However what I was wanting to know is there a way to mount the PS2 Memory card under Ubuntu via the USB device. Do I need to install a PC/SC card driver as its flash memory or do I need to use CCID?? Is it usbmount or pmount? I am a little clueless how you would get Ubuntu to read & access a PS2 Flash Card. The memory cards are manufactured by MagicGate and they bear this legend on the back; This device complies with part 15 of the FCC rules & regs and the Canadian ICES-003 operation is covered by the following conditions,
1> This device may not cause harmful interference.
2> This device must accept any interference received. Including interference that may cause undesired operation.
The way I look at it is as follows, if these memory cards are now defunct and no longer supported by Sony as such an 8mb memory card makes for a cheap storage method. Especially when people are throwing them away! The Venom adapter's are available on eBay. Let the hilarity ensue, mail your friend's some files on a 8-MB Ps2 Memory Card, then laugh with evil glee when they cant open it.
$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 004: ID 054c:02ea Sony Corp. <-- ah ha!
im new in all this, i already found a lot of drivers for my pc but this is annoying me xD fedora does not recognize sd memory/card
View 1 Replies View RelatedI came across this article, which I found to be very interesting and thought share it with you all.
Graphics CardMemory as swap space or RAM disk.
[URL]
I would like to install fedora onto a memory card 16Gb kingstone SDHC that I use in a ACER aspire one
I followed the instruction on the website and I found the following problem:
The wireless and Ethernet hardware where either not found or, if they were found, they did't work and there were no possibilities to make it work.
The strange thing is that almost every time after I attempted to boot form the memory when booting window as usual, the Ethernet hardware was not found anymore also under window!
My SD card is recognised by OS 11.3 if it is inserted at boot up. If I remove it and reinsert it, the devise monitor states 'no devices plugged in'. This is a problem that I have also had (and reported in these forums) with 11.0, 11.1, 11.2.Now I notice that there is a section for 'removable devices' in the system configuration. But even if I click the box 'enable automatic mounting of removable media' and the sub-box 'automatically mount removable media when attached' the SD card is not remounted, there remain 'no devices plugged in'.
View 9 Replies View Related