Ubuntu :: No Display During Boot?
May 4, 2011
I'm quite familiar with CentOS and have used ubuntu in the past, recently I decided to do a clean Ubuntu install and I've been running happily for about a week. That is until I decided to upgrade from 10.10 to 11.4.
The first thing I've noticed since upgrading is that I can't see any part of the boot process as the screen just displays "Out of Range" until I'm shown the login screen, no boot selection and no display of drivers being loaded - which can cause problems when you need to troubleshoot. No worries I thought....
However, I noticed that since the upgrade moving windows around on the desktop was slow which is probably because I'm not using the right driver, so I decided to let it install the recommended driver.
Now I never see the login screen. It just keeps saying "out of range" for eternity. I've even tried booting into runlevel 1 - still the same thing. Do the drivers actually apply here?
I've also renamed my xorg.conf in an attempt to fix things - no luck.
Is there a way to get back from this without a reinstall?
View 1 Replies
ADVERTISEMENT
Jan 8, 2010
How do I get Grub to actually display as opposed to automatically choosing which OS to boot and booting it?
View 4 Replies
View Related
Oct 11, 2010
I just upgraded my laptop to 10.10 and now when I boot the display doesn't show anything. This laptop worked flawlessly on 10.04. I can tell the underlying system is fine, because if I type my boot password the hard disk activity picks up like it is continuing to boot, and CTRL+ALT+DEL reboots the computer as one would expect. When I boot using an old kernel (a leftover from 10.04 I think) via GRUB the system boots normally. What can I do about this? My laptop is an HP Elitebook 2730p. According to the specs it uses an Intel GMA 4500MHD for graphics. I am using the 64-bit version of Ubuntu.
View 5 Replies
View Related
Oct 21, 2010
I'm new to ubuntu, and pretty new to windows as well. I'm not proud of it but before windows 7 I was using a mac. I have installed ubuntu 10.10 netbook i386 onto a flash drive, but when I go to boot my comp with it I get my initial boot screen, then the ubuntu screen, but then my display goes black.
I dont really know what comp specs to give...
4gb ram
Intel core 2 duo p8600 2.4ghz
NVIDIA GeForce GTX 260M
View 2 Replies
View Related
Oct 31, 2010
I'm running 10.04 as a DVR (mythtv). If the computer boots with the TV off it won't detect the settings, and when I turn the TV on nothing displays. I have to ssh into the computer and reboot it to get it to detect the display.Any idea how I can go about solving this? How can I disable autodetect and force it to use a specific setting?
View 3 Replies
View Related
Nov 8, 2010
This little guide is for anyone with an HP Touchsmart Tm2 series running Ubuntu 10.04 and above. PLEASE NOTE: These workarounds, solutions, and tips have been tested and verified to work on an HP Touchsmart Tm2-2050us running Ubuntu 10.04 Lucid Lynx and Ubuntu 10.10 Maverick Meerkat. Installation: There are no problems I have experienced with installation except for the display not working on the live USB/CD images occasionally, this can be fixed by simply closing the display lid, and reopening it (this usually has to be done at least 2 or 3 times). Display: Most times after boot up, the display is black. A workaround for this is closing the lid and reopening it (repeat until the display works). Another reported solution is as follows:
1) Open a terminal
2) Type:
Code:
sudo nano /etc/rc.local 3) Add this to the bottom of the file (this disables the ATI part of the hybrid graphics card):
Code:
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
4) Press CTRL-X (to exit), Y (to save changes), and ENTER/RETURN to accept the file name.
5) Reboot
Note: This solution is also reported to increase battery life.
Trackpad: It may seem that the right click button is disabled, but it isn't. To right click, you must tap the very bottom right corner of the trackpad. Also, by default the trackpad does not have multi-touch enabled (even though it is capable of it). A reported solution for this is:
1) Open a terminal
2) Type:
Code:
sudo nano /etc/X11/xorg.conf.d/50-two-finger-scroll-touchsmart-tm2.conf
3) Add this to the bottom of the file:
Code:
Section "InputClass"
Identifier "enable synaptics SHMConfig"
MatchIsTouchpad "on"
[Code]...
View 8 Replies
View Related
Nov 26, 2010
I use ubuntu server as a virtualbox instance, bridged networking enabled. if the server would display the IP with which I can connect to it after boot. In that way I don't have to login as root and run ifconfig.
View 2 Replies
View Related
Apr 4, 2011
Is there a way to display the boot logs as ubuntu is starting up? Call me old fashion, but I think it's better than staring at a pretty logo that does not tell me what's going on everytime I boot. I am using 10.10
View 2 Replies
View Related
Mar 19, 2010
I regularly use 2 monitors at 2 different locations. Booting Ubuntu on monitor 1 works great. Booting with monitor 2 connected causes Ubuntuto load with really low resolution.If Ubuntu is running and I unplug monitor 1 and connect monitor 2 all is well and it works perfectly.How can I tell Ubuntu not to check/change the display settings during boot so that it will work correctly with monitor 2?
View 1 Replies
View Related
Oct 21, 2010
I bought a new computer and installed ubuntu 10.04 about 2 months ago, and until yesterday it worked pretty well. Last night it acted kind of weird (slow, application would start loading and then just die) so I restarted the machine. That's when I understood that something bad happened.
When the machine starts and the os begins to load I get a bunch of text that says things like:
mount: mounting /dev on /root/dev failed: No such file or directory.
Same for sys and proc, there might be much more in the buffer but I can't seem to able to go up. I did not do any thing special last night and so I'm clueless of the reason for this. Also, since in this version of ubuntu the boot options are not displayed by default I tried pressing a key on boot in order to try another booting option but when I do that I just get the flickering cursor sign.
View 9 Replies
View Related
Jun 7, 2011
I just performed a fresh install of 11.04 Server. The installation went smoothly and as expected. As soon as I leave the BIOS and Ubuntu boots, however, I lose my display (my monitor says "Cannot display this video mode"). I am able to ssh into the machine just fine, so I know it is booting up fine; I just don't have a local console.
Other threads related to this topic suggest adding something like "vga=771" to the boot options in grub/menu.lst, but I don't see that file anywhere in my 11.04 server install. Where can I configure display settings now?
I am using the following video card:
$ lspci -nn | grep VGA
01:04.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27)
View 3 Replies
View Related
May 21, 2010
I setup 10.04 on an older Athlon XP 3000+ ASUS A7N8X board with a Radeon RV250 video card. It works fine and dual boots with XP on the LCD monitor I have. I took it to my mom's an connected to a iiyama Vision Master 450 CRT. When I boot, I get the grub menu, and if I pick Windows XP, it boots fine. If I pick Ubuntu, the screen goes blank, as small underline cursor appears at the top left, and then the monitor goes into sleep mode and the keyboard is no longer responsive.
I cannot seem to gain access. I cannot hit CTl-ALT-F2 (or ALT-F2) to get to text login (screen is sleeping and no keyboard control). I tried Live CD, it shows a graphic at the bottom of the screen and then goes blank as well! Seem like something with monitor resolution, but I cannot seem to figure out how to force it to work. I can't seem to figure out how to get into command line mode on boot either.
View 6 Replies
View Related
Jul 15, 2010
I have an Nvidia card and I am using ubuntu 10.04. Before installing the ubuntu nvidia restricted drivers, the boot screen with the ubuntu logo would cover the entire display area of the monitor. But now, after installing the Nvidia driver and fixing the display resolution of the boot screen with the Plymouth fix, the boot screen doesn't expand to fit the entirety of the monitor display area. How can I fix this? There is a good 2 inch off from either side of the display while booting.
View 3 Replies
View Related
Sep 1, 2011
I just installed Xubuntu 11.04 via wubi. Whenever I would attempt to do a normal install, the graphics would seem to crash and the screen would become distorted and basically just blocks of black and white. So I tried to do it in graphics safe mode, which succeeded. However, now I cannot start the Xubuntu GUI, and I get the error message "Display not found".
View 1 Replies
View Related
Aug 28, 2009
I am trying to install Fedora 11 on my HP Desktop (Intel P4 2.8 GHz) machine with 1.25 GB memory. It has 265 MB nVidia graphics card (6800 series).
When I try to install from boot from the DVD, it prompts to boot (in 10 secs). However after it boots all I get is a blank screen. I suspect this has something to do with the X display initialization with respect to the graphics card I have.
I had faced similar issue with other distros before (Ubuntu) but could manage to boot with some specific boot parameters for specifying x display driver settings at boot (vesa).
I recall Fedora has similar settings like xdisplay=vesa. But unfortunately this doesn't work.
View 6 Replies
View Related
Jul 13, 2010
Anyone ever see anything like this on bootup?
[url]
The display freezes/hangs, but the kernel is still kind of responsive because I can hit Ctrl-Alt-Del and after many seconds it reboots.
I can get it (Slackware 13.0) to boot this same kernel just fine from CD; it's only the normal bootup, after the install finishes, that this happens.
I enabled netconsole so I could see the messages, shown below, but there are no errors reported. The display corrupts and hangs at the "TCP cubic registered" message which appears to be unrelated to anything video-wise.
Code:
View 2 Replies
View Related
Apr 19, 2010
I just upgraded my computer from Ubuntu 9.10 to 10.04 (beta2) restarted and the splash was screwed i thought meh i can live with it then went into my account switched to tty1(ctrl+alt+F1) and it was the same. got annoyed now asking had anyone else encountered/know how to fix this problem. pictures attached sorry for bad quality took on phone, but that is how it really looks.
View 9 Replies
View Related
Oct 13, 2010
I messed up my xorg file and now my pc wont start, when i boot ubuntu the display tells me that there is no input.
View 1 Replies
View Related
Nov 18, 2010
I've been installing Linux Mint with OSX on a bunch of iMacs, and its been working perfectly excpet for one of the iMacs. The screen will just go black when I boot from a live CD, but I can hear the login sound play. It's strange because all of the other iMac's run the live CD just fine. What could the problem be? I don't know what I can do to troubleshoot this problem.
View 3 Replies
View Related
Dec 8, 2010
machine boots straight to Windows, Grub2 does not display the normal boot menu choices. Therefore, not able to boot into Ubuntu 9.10.Perhaps someone could look at this Results.txt file and shed some light on what went wrong.This machine was working fine for a long time, then all of a sudden, it starting booting straight to Windows.
View 9 Replies
View Related
Jul 30, 2010
I've just got a question about this. What if you wanted to change only the display sequence in Grub 2 (Ubuntu 9.10) and not which o/s boots first or is the deault o/s? In previous versions of grub you could just copy & paste the lines in /boot/grub/menu.lst, but this version of grub doesn't allow you to edit /boot/grub/grub.cfg...
View 11 Replies
View Related
Mar 3, 2010
I am trying to build a media pc, and successfully so till this one little/big problem. I want to be able to turn on my tv, and pc, and have the pc display onto the TV. Ports used are HDMI(pc)->HDMI(HDTV)
But for some reason Ubuntu will not fully load with just the TV plugged in (all i get is a black screen, not even a "no signal" message).Once a LCD monitor is plugged into the VGA port. Then I see a glossy white Ubuntu symbol on the LCD monitor. Then the Ubuntu loading screen appears on both the LCD monitor AND the TV. in mirror mode. And I can see the desktop on both monitor AND TV.
I am using an ATI RAEDON HD 4200 chipset that is on the mobo. I have downloaded the proprietary drivers and installed them. A few things I have tried are the instructions on this page, finding my modeline using a modeline calculator and also going off of a suggestion from a thread on this website, stripping down my xorg file so that the Xserver would autodetect it. Which i think I did wrong because after that, it wouldn't display on TV at all.
View 8 Replies
View Related
Mar 19, 2011
i just installed opensuse yesterday and it's very nice. i wanted to install the driver for my ati mobility radeon hd 5470, so i followed the steps on:SDB:ATI drivers - openSUSEunfortunately, after the reboot, opensuse had booted but there was nothing on my screen (basically, just a blank screen)
View 7 Replies
View Related
Dec 13, 2010
I'm currently using an external screen with my laptop at home connected with a serial port. When I'm in X, my laptop display is automatically disabled, when the external screen is connected. Is there a way to do this also at boot time? Where do I have to configure this? Also I'd like to have my login shells on my external screen, when switching to them out of X.
View 2 Replies
View Related
Mar 22, 2010
The last version a Linux I had was Mandrake v9.1. However, in looking to get the latest/greatest Linux I downloaded Ubuntu and Kubuntu. After installing Kubuntu the system reboots and fails to boot into the OS. After the P.O.S.T all I get a the word "GRUB". There is no response to any keys with the exception of Ctrl-Alt-Del. I am temporarily able to get passed the boot problem if I boot from the CD and choose boot from primary hard menu option. I'm not sure how to fix the boot up problem and could use some advice. However, using the CD to boot up the hard drives installation leads me to my next problem.
While in a desktop session I am unable to drag windows by their title bar. When attempting to drag a window, the desktop becomes covered with parts of the original window spreading all over the screen in multiple directions. It looks like a kaleidoscope or bad acid trip image. I suspect the video anomalies might be configuration related or improper driver. Again guidance would be greatly appreciated here.
I have a good 'ole Matrox MGA Millenium card installed into a P4 1.8ghz system, with 512 MB ram. The hard drive originally had an old install of Mandrake v9.1, but all of the partitions were wiped and I created 3 new partitions:
- /dev/sda1 20GB Bootable/Primary Partition EXT4 (Unbuntu mounted at /)
- /dev/sda2 18GB Primary EXT4 (Kubuntu mounted at /mnt/Ubuntu_dsktop_91)
- /dev/sda3 2GB Swap space
My intent was to install Ubuntu on the 2nd primary partition and be able to switch between them. However, I tried installed Ubuntu on the first partition (reformatted of course) and I encounter the same boot problem and display problem.
View 1 Replies
View Related
Jul 8, 2015
I'm not using one atm, tried "exec startxfce4" in my .xinitrc but didn't work.
System is Debian Stretch.
View 4 Replies
View Related
Jul 19, 2010
Since doing the update which included kernel "2.6.32.16-141 fc12-i686 PAE" I can no longer boot into my usual 1280x960 desktop. I can set it using NVidia settings but even though this offers to modify xorg.conf it fails to do so. I have tried running as root and it doesn't then give an error message but when I look at xorg. conf there is no section.showing any specific screen size. It worked ok before the update. In case it is relevant the video card is a Quadro FX1400 with KDE. Also the whole program seems rather unstable since the update.
View 10 Replies
View Related
Aug 19, 2011
I need to show a static image with the logo of our department while Debian boots. Is there any easy way or tool to do this? (Any parameter of the kernel maybe?) It doesn't have to be anything fancy (like a progress bar)... just a plain an simple image.
I've seen many bootsplash projects..but most of them are broken. I tried splashy (which is available on the repo), but by the time it loads, my system is already booted, so I don't really like it. note that I don't have any Xorg server installed.
View 1 Replies
View Related
May 5, 2011
I'm trying to get my secondary display (DVI-Out) working on a laptop (built-in monitor & external display) and I'm afraid I made quite the mess of it installing the proprietary driver only to learn that my old ATI card is no longer supported and having to clean that up and reinstall the original distro driver!Anyways, I reverted back to the open source driver and all is ok. That is until I reboot. If I reboot with the DVI display connected then both displays are brought up in 640x480 res and look terrible.
What do I have to do to be able to leave my DVI display connected when I start up the machine and get it to render the way it does when I plug in the display after the machine is running?I suspect I need to create an xorg.conf file but these fancy modern Linuxes these days don't come with one (or maybe they no longer need it anymore).
View 2 Replies
View Related
May 13, 2011
I'm working on a project to have our company logo image display on the screen during bootup. Our platform is an embedded Linux device running on a custom configured linux kernel 2.6.38.2. Our development distro is Ubuntu 10.04. I am currently trying to get fbsplash to work on our device with no luck so far.
View 1 Replies
View Related
