Is there a way to display the boot logs as ubuntu is starting up? Call me old fashion, but I think it's better than staring at a pretty logo that does not tell me what's going on everytime I boot. I am using 10.10
View 2 RepliesI just (regrettably) did a clean install of 10.04nbr on a Dell Mini 10. I got to wifi and gma500 crap all worked out (almost), but now when I close the lid, and reopen it, I'm greeted with a black screen. I know it's still running, because I can hear the little drum sound of the login screen loading- it's just not displayed to the screen. ctrl-alt-f8 brings it back, but just the login screen. After logging in - I can see that all my apps have been closed. It's like it brings up the wrong tty (sorry if I'm using the wrong wording). I don't know if it's relevant, but I have it set to log in automatically. This is a bit frustrating- I've done some googling and haven't found any relevant information.
View 3 Replies View RelatedI recently clean installed Ubuntu 10.10 and copied over my last home directory from 11.04, after having upgraded from 10.10. Maybe something went wrong in this transition which is making this happen. Basically, I have a macbook pro with Ubuntu 10.10 64 bit and have the latest nvidia driver. I'm sshing using -X and -A. I try "emacs &" and Ubuntu logs me out immediately. Occasionally, it will simply log me out on startup although I haven't seen this happen in the last few logins. I also just tried running kdiff3. It starts to load the window and it does the same as emacs: it logs me out of Ubuntu.
View 3 Replies View RelatedI'm looking for a program that will digitally display the time in three different cities - all showing at once. I don't care if it is a panel applet or stand-alone. I'm using Suse 11.3 and Gnome.
View 5 Replies View RelatedIs there a software I can use to display on a terminal that would display traffic or log information to a display terminal. I have CentOS on all my boxes. I would like to have a terminal up and have it show things like requests to the DNS servers, apache or maybe anything else. Especially errors. I know if I had something just displaying live from the web server it would go by so fast you couldn't see it so I would have to slow it down or something.
View 1 Replies View RelatedI have the following problem: syslog is constantly writing to disk, because the kernel spams these messages
Code:
Apr 4 14:14:56 aspire kernel: [138498.252610] display port opened
Apr 4 14:14:56 aspire kernel: [138498.299755] display port closed
Apr 4 14:14:57 aspire kernel: [138499.328206] display port opened
Apr 4 14:14:57 aspire kernel: [138499.371835] display port closed
Apr 4 14:14:58 aspire kernel: [138500.452671] display port opened
[Code]...
I have this server that runs Tomcat . this server sends mail with localhost as MTAthe local MTA is sendmail (with the default settings) . from time to time i have this strange thing and the emails it sends never reach the destination. the log shows it left the server , but looking at the logi see that the time on the log is wrong . sometime its correct and ometines its +2 hours. i guess this email are bounced at the destinationfor sending at future time . all this email that didnt reach the destination have this in common
Feb 22 15:47:44 BE00 sendmail[12969]: n1MDlikZ012969: from=<support@example.com>, size=5912, class=0, nrcpts=1,
msgid=<5269969.391235310464949.JavaMail.tomcat@BE00.example.com>, proto=ESMTP, daemon=MTA,
[code]....
I want to run a script that runs after every 15 minutes that i will do using crontab. But in script want to search a string from the last 15 minutes logs in log file containing data of whole day.
how i can search the string according to time difference that is logs from from current time and current time - 15 minutes.
Sample logs are as follows:
26-Aug-2010 16:38:46,055|9172310750|subscription_app|31ba267e%3A12aadd47bdc%3A50e9|ChargeAmount|ChargingIntercep tor - subscriber details processed sucessfully- {arg0.referenceCode=balanceEnquiry:true;subsChannel:Unknown;channelType:Subscription;transactionId:3
[Code]....
Is there anyway to view the Boot Log of the messages displayed during the booting of Ubuntu? I found log file viewer under Administration but there were so many logs I did not know if any of them were the Boot up logs. I have my Ubuntu configured to display the messages as it boots before it switches to GUI mode and I see an error message about something failing to initialise but it goes by too fast to read the entire error message. I have Ubuntu 9.04 64-bit
View 2 Replies View RelatedWhen booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies View RelatedEver since upgrading to 10.04 my desktop time displays the logon time and doesn't update.
View 1 Replies View RelatedI have installed Ubuntu 9.10 on my PC ie AMD Athlon x64 with 15 GB for (root) partition and 2 gb for Swap Space,with 1.2 GB of RAM,but after the successful installation its not displaying the GRUB immediately, taking 90-270 seconds to display? What might be the reason.? I have windows XP on my pc,even for booting into Win XP, one needs the GRUB display, its taking almost 90-180 Seconds to display the GRUB(sometimes more than that). But this thing never used to happen in previous versions of Ubuntu? Why only for this specific Ubuntu 9.10?
View 4 Replies View RelatedIt looks,slackware is taking too much time to boot. It's starting daemons at boot time.
What are those daemons that i can stop at boot time to increase booting time?
What's the best way to stop starting daemons at boot time?
I'm using ubuntu Maverick on a Dell 1545 and I'm pretty much a newbie to ubuntu. Most of the things have been fine so far, I just plugged it into a proxyless internet connection and adjusted my location for time zone (I've been using a porxy server previously for internet which didn't allow changes in location and time zone work) and since then that calendar has moved out of the scope on the top right corner of my screen and I'm unable to move it.
View 1 Replies View RelatedI am done with installing cron jobs for performing rebboting operations, now my requirement is sending the bootlogs to an email address.
View 1 Replies View RelatedI'd like to know if it's possible to set the DISPLAY environment variable in order to display on two machines, the local and the remote, at the same time.
View 2 Replies View RelatedI was wondering how could I display a list of all of my users and their log on time, you know like small reports on what user was connected for how long.
View 5 Replies View RelatedI have the bar at the top configured to display the time but it is displaying 12 hours out.For example, it's now 16:49 but the time is displaying as 06:49. If I click on Adjust Date & Time it has the correct time in there and it is configured to display 24-hour format and is in the correct time zone. If I switch to 12-hour format it displays 6:49 AM which is clearly incorrect.I can't fix it because it thinks the time is correct when I try to change it.
View 4 Replies View RelatedI have just updated to karmic. For some odd reason, the time/date indicator on the top panel now spreads the data over two lines, rather than placing them side by side. There doesn't seem to be any option in the preferences program to control this.
This means that the panel cannot be reduced below a two line minimum. Not only have I lost desktop space, but the panel icons have expanded to suit the new thicker panel.
Is it possible to replace the date and time display on the gnome panel with the discordian date?
View 3 Replies View RelatedI need to move the 'notifications' that are displayed to the bottom right corner and also reduce its display timeCan't find where they are controlled from and they are pretty annoying (most of the time)
View 5 Replies View RelatedNotifications that popup in Ubuntu (e.g., for downloading items in firefox or Network configuration stuff) display a rectangular black box in the upper right corner of my Desktop. It often covers up items I need to access like logout items or links to my Account etc in a webpage I'm in. I often find myself having to wait for the Ubuntu dialog box to disappear before I can access whatever it is covering up.Is there a way to make these dialog boxes appear in the LOWER right corner instead? Also is there a way to shorten the amount of time that these notifications display before disappearing?
View 9 Replies View RelatedHow do I switch from 24hr format to 12hr format clock in Fedora 12 + KDE?
View 5 Replies View RelatedAfter much too often wondering "hey, when did I actually start this time-consuming command?", I'm considering adding a timestamp to my bash prompt.My first try was simple: PS1="(A) $PS1" which gives a display like:(16:58) exscape ~ #
However, the problem with that approach is that it displays the time when the line was written, not when the command on it was executed. So, if I run "ls" at 16:58, and get a new prompt "(16:58) ..." and then run the next command 2 hours later, it'll look like this:(16:58) exscape ~ # new-commandI of course want the line to display the time when the command was actually run, not when the prompt appeared.
I just reinstalled, and can't get the setting set right so that my display does not shut off after a certain period of time. It is shutting off after a while of inactivity, and I do not want it to.
View 2 Replies View RelatedIs there a way for the time at the top of the screen to display seconds as well as the date ?
My clock seems to be about :40 seconds off... before i upgraded from f-13 i had my time controlled by ntp(how to verify ntp is enabled) ? even with network time = yes, it seems to lag a little.
I figured out the network time. it is under a whole separate menu for some reason.
Is there a way to get weather/ temperature like in classic gnome ?
Rite now my clock reads: tue 3:50 pm...Is there a way i can make it read: tue, aug 20, 2011 3:50:45 pm
How can we write a file and display in terminal at the same time. Like for example, when I do..
php -f file.php > testfile
That should save right.. but I want to display it in terminal otherwise.
I'm getting BSOD when I'm booting my main system (debian 8 fully updated). I get a BSOD with a _ sign. URL...because I can't access to failed boots files. Besides having the files
Code: Select allfelipe@debian ~ % ls /var/log/journal
362d07f9e18b45f8aec4575c347f181d 92e8a448f7a348719da129184a7e6821
Code: Select allfelipe@debian ~ % journalctl --list-boots
0 0c51ae5b67f144059c5470dbe345d621 vie 2016-03-25 09:05:29 ART—vie 2016-03-25 09:11:58 ART
I am using the following script to creates list of accessed files.I like to add modified date and time of accessed files in the output.
For this what needs to be added in the below script??
#!/bin/bash
#
# creates list of accessed files
#
set $(date)
find /hdc160GB/programmers/projects -cmin -1440 > /hdc160GB/programmers/data/fileschanged/alert_$6-$2-$3.txt
1. Given a string, row no. and col. no., I want to display it in the screen appropriately. how to do this?
2. How can I find the cpu processing time taken in carrying out the sorting task (any sorting program)?