Ubuntu Networking :: When Switch Rebooted Network Connection Lost?
Apr 19, 2010
When there is a power failure at my university for about 30 minute, my computer stays up because of a UPS, but the switch it is connected to via ethernet is reset. After this, my machine loses network connectivity until I manually select the network using nm-applet.
In System -> Preferences -> Network Connections, the network has the "Connect automatically" box checked.
However, in /etc/NetworkManager/nm-system-settings.conf, there is a line that says:
Code:
no-auto-default=00:30:48:b0:11:07,
and that is the MAC address of the ethernet card.
I'm running Ubuntu jaunty.
View 3 Replies
ADVERTISEMENT
Feb 12, 2011
I have had long term access to a networked HP Photosmart printer but now I get the following message:
Unable to open device hp:/net/Photosmart_C5100_series?ip=192.168.0.161.
when trying to access it.The ubuntu desktop is wired to the router as is the printer and another iMac wirelessly can still print to the HP. HPLIP status shows the icon for the printer but with a red x indicating no connection to it.The only recent network change was the removal of another router from our network. (service is DSL via a combo modem/router from service provider which previously was connected to a Dlink router which has now been removed from the chain b/c was redundant to the modem/router)
View 1 Replies
View Related
Nov 1, 2010
I had some problems installing 10.04, which I'm not going into here unless I have to, but it appears to be up and running now except my PC can't access the network, even though it's wired. This is the first time I've tried putting on a new build by myself as my son always used to do it (my PC used to belong to him many years ago, and is old, like me.)
View 1 Replies
View Related
Jan 30, 2011
I initially loaded Fedora 14 onto a Desktop and started to configure it to be a server but as soon as Iso software updates My network connection completely drops.
View 5 Replies
View Related
Oct 24, 2010
I have been running Meerkat in its various forms for the last few weeks. Wireless connection has not been a problem at all. I rebooted about 15 mins ago and on restarting the wireless connection will not connect. I checked to see what the problem was and clicked on Edit Connections and on the wireless tab.
My wireless is set to auto and its name is SKY 24550. I now have 2 entries in the same name and the one that is trying to connect is asking for wep 128 bit security details to be entered. My connection used WPA&WPA2 personal.
Ok, I thought I'll delete the new one (with the different security setting) and try again.
No good, it still asks for the same security details.
So I go back into edit connections and the new one is back again! I can't get rid of it, and while it's there the one that should connect isn't getting the chance.
Fortunately ethernet is working ok and I also have a Natty install which also connects ok through the old wireless connection, but not in Maverick.
View 2 Replies
View Related
Apr 18, 2011
After i install it i lost my internet connection . i got a message " Wired Network " " you work offline ". i use cable ADSL ,.... my Pc information HP Pavilion 6700 running with both Window 7 & Ubuntu 10.10 note... my network connection work correctly on W7.
View 1 Replies
View Related
Feb 21, 2011
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
View 6 Replies
View Related
Feb 9, 2011
I am running Ubuntu 10.10 with all updates, and I have a 1tb external hhd I had a 850gb true-crypt file on the external hhd, I had to reboot the computer. whenever I reboot the computer I always dismount the true-crypt drive, and when I logged back into my computer the true-crypt file on my external hhd is gone and it shows the extra free space as well,
I have not done any writing to the external hhd so I am hoping the file "should" be recoverable. I don't know any really easy and good data recovery tools for Ubutnu, It would be easier for me if their is a gui program, I can manage using the terminal.
View 2 Replies
View Related
Feb 25, 2010
I running Ubuntu ver 9.04 I have 2 problems that I think are related. After finally making a network connection I updated Ubuntu, and after a reboot I lost my network connection again.I updated the following file nm-networkmanager-settings.conf and saved it. After another reboot I then lost my network connection icon and it also does not appear under System > Preferences. I tried to then update the same file and can not save it, I get "could not save file".I have tried sudoedit, sudo gedit, gksudo gedit and some others that I cna not remember now and all give me the same result
View 2 Replies
View Related
May 20, 2011
I played with the Network Settings section in YaST, because I wanted to use the wireless network card I installed into the PCI port. OpenSUSE recognised the type of card and its MAC number, and told me that I needed to install a firmware (fwcutter something). I tried some changes on the cable internet connection (like activate on plugged) while I tried to change the wireless connection (like activate on boot).
What I have now is that my cable internet connection is not working at all (it was working just 3 days ago), my wireless internet connection is, as always, not working either. I managed to work the wireless card on Windows XP by finding its drivers.
Since the problem is with my office computer, I cannot answer the exact brand names of the ethernet card and wireless card. Shall I reinstall OpenSUSE 11.3 from the DVD I have?
Second problem: OpenSUSE does not recognise my external harddisk, it gives an error about mounting the device.
View 9 Replies
View Related
Jun 21, 2010
After having updated unconditionally all packages in Kde-desktop-factory-repository to get the latest version 4.4.4, I can no longer connect to the Internet through Knetworkmanager. I receive the the following message from a pop-up window when clicking on the Knetworkmanager icon
Code: KNetworkManager cannot start because the installation is misconfigured.System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution.KNetworkManager will not start automatically in future.I tried opening Knetworkmanager in a terminal as root user through 'su' but received the following message:
Code:# knetworkmanager knetworkmanager(2331): KUniqueApplication: Cannot find the D-Bus session server:"Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
View 2 Replies
View Related
Apr 23, 2010
Last night I went to Synaptics (in 10.4) and typed in bluetooth and deleted 3 packages to get rid of bluetooth (which my laptop doesn't have).
Unfortunately, I lost my wireless with it, and the network connections option in Preferences.
what the 3 packages are so I can reinstall them?
Or an easy to way to reset an installation to repair this problem?
View 3 Replies
View Related
Jul 4, 2010
I just installed ubuntu 10.04 on my laptop. everything was working fine until i installed firestarter. i didnt like it and uninstalled it. when i did that i lost my wireless signal icon at the top of the screen, firefox starts up in offline mode, and limewire says that network connection is lost. i just want it back the way it was before installing firestarter. please help, i dont want to reinstall ubuntu if i dont have to.
View 2 Replies
View Related
Jan 15, 2011
I am new to linux and also new to this forum. I love how light Slax is but it won't let me connect to my wifi. It scans and finds my router but the option to switch to the network is grayed out. How can I fix this problem?
View 1 Replies
View Related
Jan 1, 2011
The connection/network icon that showed next to the clock is gone. i told it to "move", but instead it removed. grrrrr. now when i go to add, i dont see it. same with email.
View 6 Replies
View Related
Jul 9, 2010
I need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies
View Related
Mar 15, 2011
how i can use VLANs. as i have red on the web, it is possible to have a switch to allocate ports to a single VLAN. thus splitting subnets on a port allocation. since i have a pc running KVM, it is possible to create multiple subnets for DMZ and LAN. thus my question is - is it possible to have a SINGLE cable connection to a switch that carries TWO subnets? so that i can decide how to distribute then on the pc?
View 7 Replies
View Related
Oct 8, 2010
recently i have combined 2 machines into 1. after doing this, the ping to the new machine stops, for no apparent reason, and consequently all traffic to/from the machine also stops. when using the two machines individually this never happened.Lastly, if i restart the network, it kills everything (like the network just wont restart - it reaches the last interface and hangs), and if i reboot the machine, it seems to be fine for about 3-4hours.has anyone seen anything like this when connecting a large number of hosts to 1 gateway, using linux as the router?
View 2 Replies
View Related
Aug 5, 2010
I used to be able to connect to the net using my laptop {Ubuntu 9.10 on Compaq nx7400.}by means of wi-fi . I do not know what I have done but I lost the facility to connect to the net.I noticed the Network Manager disappeared from the notification area. I manged to put it back. It detects the signal from the router and after entering my password it displays Connection Established but I still cannot access the net and does not load any web pages. I have the same Ubuntu 9.10 Desk on a memory stick, when I use it on the laptop it works fine.
I enclose a screenshot of iwconfig.I did sudo lshw -C network and it shows DISABLED. How do I enable it ? Are there any other info that I should supply and what and how.
View 1 Replies
View Related
Feb 16, 2010
I've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal:
1.) Learn about network setups on Linux
2.) Be able to maintain my own (virtual) network
3.) Configure my (virtual) network
View 1 Replies
View Related
Jan 23, 2010
I am running ubuntu 9.1 on a Dell Dimension 2400. After installing ubuntu on the pc, it was automatically recognizing my router and connecting to the internet fine via ethernet. Then, my roommate unplugged the router and it won't recognize it. I can't access my router settings, and ubuntu is recognizing it as "inactive" but every other computer in the apartment runs fine. My PC uses a broadcom ethernet controller, and my router is a Linksys wireless N.
View 1 Replies
View Related
Aug 11, 2010
My ISP pushes software updates occasionally to my router. This also forces the router to restart. When the router restarts, my ubuntu box loses its network connection and does not automatically restore it after the router comes back online.How can I configure ubuntu to restore the connection once it is available again? It happens on my windows workstation...I am using ubuntu on a box with no screen / keyboard / mouse it serves as a fileserver and I remote desktop in. Obviously if the box drops the connection it is a major annoyance. I am using version 9.10
View 1 Replies
View Related
Jun 27, 2011
So, when I booted up, the wired connection was automatically detected and in use. Whenever I suspend my computer and then resume it later I lose the wired connection. It is detected (seen) by Networkmanager, but I can never connect. I found a way to restore the connection, but it is manual and I was wondering if I could automate this process every time I resume. Details follow:
Laptop: HP dm1z, Natty 64bit. ethernet card:
Code:
#lspci|grep Ethernet
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Likely culprit (according to dmesg)
[Code].....
View 1 Replies
View Related
Jul 25, 2011
I was running 8.04 and my internet (Comcast) comes via a Motorola SB5100 cable modem then into a Netgear router then into my Dell. When I upgraded to 10.04 yesterday, I lost the wired connection. The wireless connection still works fine, but I have not been able to get a wired connection. Also, most online solutions reference the Network Manager, which is nowhere to be found.
Anyone have any solutions? I would be willing to revert to 8.04 if needed, as that worked fine, and obviously I quite regret the upgrade!
View 2 Replies
View Related
Sep 1, 2011
After I updated ubuntu 10.04.3 and restarted my PC, something weired happend and my wired connection was completely lost. I tried different things but it seems that I have lost my ethernet connection. I only have ethernet card and the interface was set to eth0 which is not recognized anymore.
The /etc/network/interfaces includes the following commands, which btw I tried to play with a bit by commenting and uncommenting the lines but was not helpful (but this is the original one):
Also in /etc/udev/rules.d I deleted 70-persistent-cd.rules hoping that it would be automatically regenerated but it did not,
Here are some messages I get :
lspci:
View 1 Replies
View Related
Jan 18, 2010
I have created the following script
Code:
#!/bin/sh
interface=`ifconfig | grep -iE "(wlan0|gprs0)" | awk '{print $1}'`
[code]...
View 14 Replies
View Related
Jun 16, 2010
I have a server which is located in the basement. The server exports a few directories which I mount on my desktop using NFS. From time to time, the connection gets lost. The server is also not always on. I can't change that part, so I worked out a script which notifies me when it's going down, and when it's back up again. It also mounts everything back.However.. As soon as I loose the connection, my desktop seems to be gone. KDE doesn't work, but I can use a few applications like Konsole, google-chrome, firefox, stuff like that. But the plasma-desktop around it hangs.
As soon as the connection gets back again, everything works. I have this issue only when my desktop is running while I loose the connection to the server. If it's down when I start my desktopworks properly. Unless the server comes alive, the nfs directories are mounted and the connection is lost again.I'm not really sure if this is a networking case, it could also be KDE related, but I figured this was the most reasonable place to put my topic in.My hardware:
linux-bbdu:~ # lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
[code]....
View 4 Replies
View Related
Mar 16, 2010
As I view it, Ubuntu has a great security risk in that it still allows internet access when the VPN connection has been lost, for whatever reason. As it is now, when the VPN connection fails you get bumped back to using your regular IP, and whatever you are doing becomes transparent to anyone watching. This is simply unacceptable for an allegedly secure platform. Does anyone know of a way to fix this with a script/program, or is there a distribution/OS that allows this? Windows re-dials the vpn automatically, but still allows internet access in the mean time.
View 1 Replies
View Related
Jun 6, 2010
I installed a clean installation of ubuntu 10.04 inside Windows 7 and wireless worked normally in the beginning that I downloaded and installed all the updates "I selected without updating Grub".On the first reboot after updates, the wireless icon disappeared from the panel and could not connect to the internet although the settings in the Networking tools were correct.
View 1 Replies
View Related
Sep 23, 2010
I installed Lucid a week ago and have been having a blast with it after a two year break from Ubuntu (been using Mandriva). So the other day I went to hibernate the system and it froze. I naturally did a hard reset and when I log back in, no network connection. That is to say, the system tray says it's connected but there is no LAN light on the router or network card. ifconfig shows it's connected too. When I boot into XP (cringes) it works just fine.
No specifics ATM but the card is a D-Link PCI with a Realtek R8***** chipset
View 6 Replies
View Related
