Ubuntu Networking :: Usb Broadband Not Working (Ethernet Port Not Available)
Apr 20, 2011
I am using ubuntu 9 but unable to connect to internet via my usb Siemens c110 modem. I have a dual boot system of both windows7 and ubuntu9. I am using the same modem in windows7 and have installed virtualbox where i have installed the same ubuntu9 but there it automatically detects the wired connection(usb)[eth0] but in the actual boot it doesnt detect anything. I have typed in the terminal sudo ppconfig but it was unable to find anything.
View 1 Replies
ADVERTISEMENT
Feb 10, 2011
Pl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies
View Related
Aug 30, 2010
i have an embbeded hardware that uses bootp for booting from a Network Managemnt Host (NMH)on the same ethernet. The embedded hardware has both kind of ports i.e ethernet as well as E1/T1. I would like ask, what do i require to establish a communication-link between the embedded hardware and the NMH throuh E1/T1 ports of embedded hardware, so as to make it boot through from E1/T1. Further, NMH possesses only ethernet port. Just to refine my questions i'd like to know what additions do i need to do on my NMH , like may be i have to put an E1/T1 port or is it possible that the E1/T1 port can be directly connected to an ethernet port on the other host.
pardon me if i am not making absolute sense here as my knowledge is limited on Layer 1 and layer 2.
View 3 Replies
View Related
Jul 27, 2011
I am running 11.04 on a Dell Inspiron 1501 (the first gen.). I was using my Ethernet port to connect to the internet until about two weeks ago - suddenly the system no longer recognised that port even existed and just kicked me offline. I am able to get online now with a wireless card (replaced the broadcom card, that was a whole different can of worms...).
why my system is unable to connect with the Ethernet port? If I plug in the cable nothing happens.
View 2 Replies
View Related
Jul 29, 2010
I can't figure this out for the life of me. I am new to Linux too. Wireless works fine. I plug my Ethernet in and turn off wireless and I cant surf the web, download, etc...Network Manager finds the wired network under eth0 and it works perfect on my non-linux desktop (nervous to even mention Vista around here). Firewall was set up with basic setup (I didn't make any changes). I have a Sony vaio VPCCW21FX with fedora 13. Can anyone point me in the right direction?
View 10 Replies
View Related
Apr 29, 2010
I have a Dell Studio 1501 Laptop and I want to bridge the wireless with the ethernet port so I can hook my xbox360 to my laptop.
I've spent the last 2 hours trying different techniques but nothing is working.
I'm running Ubuntu 9.10 so the last thing I tried was going into the network manager, clicking on wired, editing the ethernet port and allowing it to share. This did nothing.
I tried to share the connect with firestarter but that did not work either.
View 2 Replies
View Related
Jun 21, 2011
I am running Ubuntu 11.04 and i am curious to if there is a way to share my established wireless connection through my Ethernet port.. I know it was possible in Windows by going to adapters and bridging the wireless, and Ethernet adapters. how to make this work in Ubuntu?
View 1 Replies
View Related
Mar 1, 2010
I changed to a 4 port ethernet router (D-Link DSL-2542B Adsl2+)with intention to share Internet access with my brother (he's on Vista).Initially it all went well,but 3 days ago there were connection problems occured on the part of the ISP. Without realized the problem,I had reset the router.This morning I've been informed by the ISP that the connection has been re-established.So,I accessed the Internet via the 4 port router but failed to do so (server not found).Suspecting that the problem was from the 4 port router,I reverted to my old Adsl router (DSL-520B single port) and without any problem I managed to access the Internet back.I really need help to configure back the 4 port ethernet router to its initial state.
View 9 Replies
View Related
Jul 21, 2011
I'm running an ubuntu maverick server, and I'm having a slight problem with networking. I've only got one ethernet line running into my room, and I've got loads of computers. The server has 2 ethernet ports, one integrated into the motherboard, one on a PCI card that I took from my old server. The on board ethernet never worked on my old server- but I only tried it out post-install, it was hooked up to the card during install (For the record, networking on linux has *never* worked for me if I installed then plugged in the networking stuff after the fact). So I just used the card instead. Transferred the hard drive into a new machine, and lo and behold, it would only work after I transferred in the card from the old one. What I wanted to set up is a basic NAT system, where the network connection is routed through from my server to my main desktop- but when I run ifconfig, my card is not detected, just lo and eth0. How can I fix this?
View 3 Replies
View Related
Aug 13, 2010
I am using Ubuntu 10.04 Lucid and VMware 2.0 server. I have a an XP virtual machine that is needed for work. When I am at home and I place my cat 5 cable to my cisco catalyst switch, my XP VM recognizes the ethernet card on my laptop and bridges fine with ubuntu and works fine and I can get to my network. When I take my laptop to work and I go to a site and I plug it into a World Wide Packet 311 management port on the switch, my XP Virtual Machine does not see the network no matter what setting I set it too(100 full, 10 full, 10 half and etc). It simply says that the network card is disconnect. Ubuntu see the network fine and I can ping and talk to the network without any issues but the VM does not.
View 2 Replies
View Related
Nov 8, 2010
I have a simple server running Ubuntu Server. Usually the server connects to the network by Wifi, so there is usually no cable connected to the Ethernet port. I noticed that there is a dhclient3 running on eth0 anyway. It is causing undesirable disk activity. Obviously, it is never going to get a response as long as no cable is connected. I can kill the responsible process manually, but I wonder first what is starting the process and how I can prevent it from being started. If there is a way to get the server to boot without starting this process, I wonder whether this is the right solution. Connecting to the network by Ethernet is the failsafe when Wifi doesn't work. I guess what I would like to see would be a way for the server to detect when eth0 does not have a cable connected and not start dhclient in that case, but to activate dhclient when a cable is connected.
View 4 Replies
View Related
Jul 6, 2010
I have a server in a colocation environment where I'm allotted 25Mbps. I'd like to avoid exceeding that for obvious reasons. Is there a way I can set the link speed or at least throttle the bandwidth for all services?
View 2 Replies
View Related
Mar 11, 2010
I'm currently using Ubuntu 9.1, and a motherboard which has two Ethernet ports on it.
What I would like to do is bridge these ports, so I can plug in another Ethernet cable and run it to an unmanaged switch in my room (handy for my work laptop when on-call and building other PCs, etc).
I.e. Router --> 8-Port Switch --> My PC.
Eth 0 --> 192.168.1.100 static
Eth 1 --> 5-Port Switch --> DHCP
I believe this is the config to make the ports bridged:
ifconfig Eth0 0.0.0.0
ifconfig Eth1 0.0.0.0
brctl addbr Bridge0
brctl addif Bridge0 Eth0
brctl addif Bridge0 Eth1
ifconfig Bridge0 up
- How do I save this so upon reboot it sticks?
- How do I force Eth0 to remain as a static IP of 192.168.1.100?
View 8 Replies
View Related
Jul 28, 2010
I have a Dell WLAN 1397 Half Minicard, 802.11 b/g card in my laptop, and I can't seem to get ubuntu to work with it. I tried this method:
1. Synaptic Pack Manager
2. Check "Install from Boot Disc"
3. Reload
4. Install and apply bcmwl-kernel-source
5. Reboot
This didn't work for me, so I tried entering sudo apt-get install bcmwl-kernel-source and that also didn't work. Another thing I tried is formatting my Ubuntu partition and reinstalling, and retrying both of those methods. The ethernet port does work, however.
View 3 Replies
View Related
Feb 25, 2010
I want to transfer the audio file on linux machine using Ethernet port, is it possible?
View 6 Replies
View Related
May 20, 2010
I recently installed a new CPU and motherboard in my Media Server, but the ethernet port isn't showing up under ifconfig. Is there any way to install additional drivers? EDIT: The model is Realtek RTL8111/8160B.
View 3 Replies
View Related
Oct 6, 2010
while my brother was browsing the web on my windows partition he had a blue screen pop up, one of the soft/hardware error ones, not a true BSOD, anyways, ever since my lan port on the computer seems to not be activiating as no wired connection is recognized. The lan port/card is directly attached to the Mother Board, it's a gigabyte motherboard in a self-build computer. I'm just wondering if there's anything I can do to troubleshoot this and see if it is truly a hardware problem or if its something else.
View 9 Replies
View Related
Jan 12, 2010
I have a strange problem with my mobile broadband connection. I hope I am not the only one (so it will be fixed), but since I haven't found any others having the same problem yet, I am not so confident.I started using mobile broadband, via a HUAWEI E1762 HSPA USB stick since Jaunty. I've had the same problem in jaunty as I do now in Karmic. Although in Karmic, i've had additional problems (that problem i've found listed as a known bug).The problem is that when I get my mobile broadband to connect, it is sometimes, somehow, not fully connected. Symptoms are as follows:
1. panel icon shows connected and good strength (good)
2. skype connects, and I can chat and voip (good)
3. ping does not work (bad)
[code]...
View 9 Replies
View Related
May 24, 2010
I installed Ubuntu 10.04 into my compaq notebook. The problem is that I am not able to connect to my wired broadband internet.
Here are the details of my attempts so far:
1)"ifconfig -a" gave 2 devices eth0 and wlan0.
2)"pppoeconf" was unable to detect any ethernet cards.
3)Each time I plug in the LAN cable , the network icon would say "connecting" and ultimately result in "disconnected.Now in offline mode".My ethernet device is Realtek PCIe RT8101E/RTL102E (rev 02).
I also tried to install the realtek driver though I was not confident whether I did it correct.
View 2 Replies
View Related
Jul 9, 2010
My friend switch to Ubuntu (he has a 9.10) and want to set up the mobile broadband. He has a usb modem stick Hyundai mb-810. We tried everything - from the usb-modeswitch to wvdial and nothing works. We have read millions of pages of tutorials and forums but still - nothing works. He is now thinking to go to Windoze XP and leaving the Linux community though he is impressed with the Ubuntu.
View 9 Replies
View Related
May 6, 2010
I'm running Ubuntu 10.04 on my netbook and I am trying to get my Orange ZTE MF636 3G+ mobile broadband working.
Actually, about two times it worked and was connected and I was using it. Though that appears to have been a random and non-recratable event.
Code:
I tried usb_switchmode but that tells me:
Looking for target devices ...
Found devices in target mode or class (1)
Looking for default devices ...
[Code]....
I do notice that sometimes the device is mounted as a CD. I've tried ejecting it and it appears to be recognized (i.e the above messages appear in dmesg).
View 9 Replies
View Related
Jun 7, 2010
I've just completed switching both my laptop and desktop from Ubuntu 10.04 to Kubuntu 10.04, all seems to be working well, except that I can't get my Virgin Mobile HUAWEI E160E wireless broadband modem working. I used to have it working flawlessly in Ubuntu, I've used the smae step as described in this post: [URL] that worked for me with Ubuntu, but the Wireless Broadband tab is greyed out under the manage connections dialog. I'm running the 64-bit version of Kubuntu BTW.
View 2 Replies
View Related
Jul 25, 2010
i am using ubuntu 10.04. my huawei e1550 usb mobile broadband modem was detected out of the box and was working fine . But after unlocking it with a software,the modem is detected and when i connect ,it immediately disconnects. unlocking was some 'Firmware upgrade' . I tried other distros like pclinuxOs but the same problem prevails. and it is working in windows.
View 5 Replies
View Related
Oct 21, 2010
I am running Ubuntu 10.10 on Hp Mini 110. I can't get Mobile Broadband to work ... whenever I plug a USB device in, nothing is detected and there is no option to connect to mobile broadband. The devices I have tested are;
1. ZTE MF636
2. ZTE MF626
3. Huawei K3565-Z
4. Nokia 5800XM phone in PC Suite Mode (works on my other laptop running Ubuntu 10.04)
I have tried uninstalling with a full purge of USB-Modeswitch and then reinstalling it. This machine is upgraded from 10.04. It wasn't working in 10.04 either.
View 9 Replies
View Related
Dec 28, 2010
I installed ubuntu 10.04 in my desktop, was working fine. connecting to the internet through linksys router. now my internet is not working, because i removed the linksys router and connected directly from the internet provider modem, Motorola sbv5222 broadband modem. Now my internet is not working.
View 4 Replies
View Related
Oct 19, 2010
I just installed 10.10 on a my new Aspire One Acer netbook and I got a mobile broadband USB stick from Wind mobile.
The stick is activated because it works on my 20 GB Windoze 7 O.S. but it doesn't work at all on my 140 GB Ubuntu O.S. Both systems are on the same machine so I know it's not a hardware problem either.
Here's what happens: I log on to Ubuntu, plug in the stick and I select the "New mobile broadband GSM connection" in the network connections menu.
From there I selected my country (Canada) and my mobile provider (Wind Mobile) than I selected my plan (Mobile Broadband) and my APN (broadband.windmobile.ca).
Then the stick blinks slowly and the network icon looks forever for a connection but no matter how long I wait no connection ever establishes. My roomate has it working on his HP laptop Ubuntu but no luck on mine. The stick just keeps blinking, a steady light indicates a connection.
View 3 Replies
View Related
Apr 7, 2011
I have an acer 532h aspire one, running ubuntu 10.04.
Basically, I bought a Telstra Turbo USB broadband stick and I've been having a bit of hell getting it to work. First I couldn't get the computer to recognize it had been plugged in at all. I downloaded the modeswitch packages to no avail. I tried a few other terminal tweaks but they didn't change anything either. I left the card in and restarted the netbook and it finally recognized the wireless card. I was able to surf the internet for an hour or so a couple times. But after stowing the computer away for a couple hours and turning it on again, I found that this work around was no longer effective. So now I'm back to the blue light never blinking and I have to tether my phone and pay ridiculous data charges because I'm in the middle of nowhere.
I'm really new at troubleshooting things that don't work right out of the box.
It's a telstra turbo prepaid wireless broadband. The stick isn't even recognized as removable media.
lsusb returns this:
Also this might be relevant:
View 2 Replies
View Related
Jan 9, 2011
I need Internet on the road so brought a netbook and a USB Mobile Broadband stick. I've followed the installation instructions provided by the provider but this still does not work. I've also tried a couple of similar installation instructions found around the net. Has anybody had any luck getting this to work in Fedora 14? How did you or how can I get this to work?
View 1 Replies
View Related
May 20, 2011
I'm having a strange problem with my ethernet card. In previous installs of 10.10 on this same computer, I've never had any trouble with either my wireless or my wired internet. However, after messing around with some other distros, I recently did a fresh install of 10.10 on this computer, and now only wireless internet is working. When I plug in an ethernet cable, I do not get connected.
One difference between this install and the previous installs is that, previously, I had always installed while connected to the internet via ethernet. This time I did it while connected wirelessly. I've tried methods from other threads, but I've had no luck. In particular, I have trouble "make install"ing the official Atheros driver, and I've installed the compat-wireless driver atl1c, but I'm still not getting a connection.
Here is the relevant output of lspci -vv:
Code:
03:00.0 Ethernet controller: Atheros Communications AR8152 v1.1 Fast Ethernet (rev c1)
Subsystem: Lenovo Device 396b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at d2000000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 6000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
Kernel modules: atl1c
After a reboot, my ethernet is now working. I don't understand, but I'm happy.
View 1 Replies
View Related
Jul 27, 2011
When I start my Ubuntu machine, it says "eth0 connection established". But i could not able to ping to other machines available in LAN & also to Internet.
View 1 Replies
View Related
