CentOS 5 :: How To Find Address Assigned To A Port - 2632
Jun 10, 2011How to find the Address which is already in 2632 port?
View 1 Replies
ADVERTISEMENT
Hardware :: How To Find The /dev/sd Device Currently Assigned To A Physical Flash Drive Port
Jul 17, 2011I have (at least 4) native USB ports that contain flash drives. I know that the /dev/sd[abcd] devices are created in the order they were inserted, but say you have all four plugged in at boot time, or further, they can be plugged and unplugged in real time. At times, /dev/sdf, /dev/sdg, etc. are created as well. I'm ignoring external hubs for now.
I need to know which drive is plugged into the "top port on the front panel", etc, by physical location. From dmesg I can check right after booting and get the physical assignment of a PCI device, say, PCI 0000:00:10.3, as being assigned to the EHCI usb bus. From /proc/bus/usb/devices, and the "T:" field, I have learned that the physical connectors I'm interested are known as USB Bus 1, Port=00, Port=01, Port=04, and Port=05.
From lsusb I can see all sorts of information from the USB point of view, but with no /dev/sd references.
From /proc/scsi/scsi, I can see what scsi devices have been created, with a count consistent with the number of flash drives plugged in, but no USB data.
So, I can get lots of information from the USB storage point of view, and lots of information from the SCSI point of view, but nowhere can I find how to correlate them. In other words, if I want to mount the drive plugged into a given physical slot, how can I find the /dev/sd device I need to mount? udev isn't really interesting here, because I'm just looking for the information that udev would use to answer the same question.
I've done some heaving exploring in the /sys and /proc filesystems and have not yet found where the USB and SCSI worlds intersect.
The closest I have found is (where "Port" is the physical port number from above):
This seems to have some mapping to the physical port and references a "/dev/sd[a-z]" value, but I don't know how reliable it might be, nor do I know if my having to increment that physical port by 1 is meaningful. Anyone have a simpler approach?
So, my goal becomes
mount /dev/<sd that was created for the top slot> /mnt/top
mount /dev/<sd that was created for the bottom slot> /mnt/bottom etc.
CentOS 5 Server :: IP Address Assigned Twice To Etho:0?
Nov 18, 2009I'm stumped here as it seems like after an update etho:0 has assigned itself 2 x IP Addresses. I don't understand how this happened or how to fix it so some help would be great as I cannot access cPanel while it's like this or my sub directories.Here is a print of ifconfig
-bash-3.2# ifconfig
eth0 Link encap:Ethernet HWaddr AA:01:5F:9A:FE:26
inet addr:95.154.254.38 Bcast:95.154.254.38 Mask:255.255.255.255
[code]....
CentOS 5 Hardware :: Realtec Ethernet Card Assigned Wrong MAC Address - Fails?
Dec 17, 2009I have an HP Pavilion A6750F with an AMD Phenom 9650 Quad Core. 8 GB memoryThe NIC is a REALTEC Semiconductor RLT8111/81688 PCI Express Gigabit Ethernet Controller.The actual MAC address for the NIC is 00:24:21:55:DE:40I have loaded CentOS 5.3 on this host three of four times in various configurations and patching levels.THE PROBLEM: The system identifies the NIC as having MAC FE:FF:FF:FF:FF:FF.When this happens, the network connectivity obviously stops working.It identifies everything else OK, just maps the wrong MAC.I'm no sure how to troubleshoot this problem. I tried rebooting a couple times and once that fixed it. Usually it does not. I reloaded (gasp) Windows Vista on it and it worked ok.This last time, I reloaded CentOS it hung on the bootup (ASK ??), I reset it, it rebooted and everything looks ok; for now.
The system says it is presently using driver r8169
Networking :: Program To Assign Globa LIPv6 Address And Bind() To The Previously Assigned Address?
Apr 24, 2010Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
Debian Hardware :: Mac / IP Address Assigned By Router
May 29, 2014I have 2 PCs, each running Oracle VirtualBox with about 30VMs installed and standing on the same table
On shopping router I found TP-Link
TL-WR741ND
150Mbps Wireless N Router
[URL] ....
How can it assign 30 IP address to each PC?
General :: Ifconfig Alias Address Assigned By DHCP
Aug 13, 2010I would like to create several aliases to eth0, but have the addresses assigned by DHCP instead of being set to static IP's. Is this even possible? All the examples I've seen assign a static IP using the command:
ifconfig eth0:0 192.168.1.11 up
Fedora Networking :: Apache Listen To Assigned Port 80
Aug 29, 2010On Fedora 13 is there anywhere else on the system that I have to change to get Apache to Listen to an assigned port, something other than 80. Suppose for instance I wanted Apache to Listen on port 94. I told by the site that their router is forwarding apache to port 94. That doesn't mean I change the Listen in httpd.conf. correct. Apache is still expecting connection on port 80 but in this case 80 then gets forwarded in the router to 94. This is my understanding.
View 5 Replies View RelatedOpenSUSE Network :: How In World Do I Configure SSH With DHCP Assigned Address
Aug 7, 2011I am just trying to get SSH working between 2 local machines on OpensSuse 11.4 boxes. I have the SSHD daemon running, the firewall is configured to allow SSH to pass, and I am using SSH's password authentication. However, my machines cannot see each other. Anytime I try to SSH, I get "Could not resolve hostname<hostname>: Name or service not known."
Of course, that leads me to believe I need an entry in my /etc/hosts file. However, I use DHCP, and therefore have a dynamic IP address. Therefore, my hosts names will only be good until the next IP renewal. How in the world do I configure SSH with a DHCP assigned address?
CentOS 5 Networking :: Find Remote Machine Ip Address Used By JDBC
Mar 1, 2010I am accessing a remote DB using JDBC from inside a java program. is there any terminal command with which I can see the remote machine's ip/mac address?
View 1 Replies View RelatedUbuntu Networking :: Port Forwarding From Public Address To Private Address?
Feb 24, 2010Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
Programming :: Pass Ip Address, Port Address And Some Parameters From Command Line?
Apr 1, 2011I want to pass ip address,port address and some parameters from command line using python script.The ip address and port address for establishing socket connection and remaining parameters to execute different connection.
View 1 Replies View RelatedNetworking :: Iptables Can't Port Forward (PAT Port Address Translation)?
Feb 20, 2010I'm using a Debian servers, as router/firwall.. I've two ethernet interfaces into the server, one for wan and one for lan. The i use SNAT so my LAN clients can access the internet throgh the debian router. That is working... Now i want to be able to access servers on the LAN site from the WAN site, and i wanna use port address translation (PAT). I have a FTP server running on a lan server, so i'm trying to portward port 21.
iptables -t nat -A PREROUTING -p tcp -i eth1 -d (WANIP) --dport 21 -j DNAT --to 192.168.1.2:21
When people try to access my FTP from the WAN site, they are redirected to the local FTP server, and they are promted for crendentials, but when the credentials are typed, and the local ftp server should answer the wan request, the connections dies.
The wan clients are being promted for credentials, so they are redirected to the local lan server, but after that the connections dies, so i think there is some kind of nat problem, when the local lan server is trying to respond to the wan request..
Here i my iptables script:
#flush table
iptables -F
#input regler
[code]....
Networking :: MULTICAST Address And Port - Socket Listen Only On Port?
Feb 12, 2009I make an application on GNU/Linux which listening on a MULTICAST stream, so I open my unconnected socket, bind it on a MULTICAST address and a port, join the multicast group with the "setsockopt (IP_ADD_MEMBERSHIP)", then I receive datagram on my socket.
Now I've two different instances of the same application that run with their own MULTICAST address and port. And what I found strange is that, after a misconfiguration, I switch the ports, for example:
Emitting on 225.0.0.1/23451 and 225.0.0.2/23452
Receiving on 225.0.0.1/23452 and 225.0.0.2/23451
And my receiving part doesn't care about the MULTICAST address, it looks like the socket is listening on the port number only! I mean that the receiver [225.0.0.1/23452] take its datagrams from emitter [225.0.0.2/23452] and vice-versa!
Ubuntu :: Installed Iscsi - Find Out The Id Assigned To Pc?
Dec 24, 2010On windows I installed the iscsi initiator which tells me my pc id. Then I take that id and put it in my storage which automatically gives me my extra disk. How can I find out the id assigned to my ubuntu pc?
View 1 Replies View RelatedCentOS 5 Server :: Centos And Xen: Lan Error - Vif0.0: Received Packet With Own Address The Source Address
Jun 18, 2010I installed the Centos 5.5 and after the Xen. After I put a virtual machine named VM01.Initially it worked properly, I tried everything and it worked.When rebooted, I had problems with the network.I have two network cards eth0 and eth1, but eth1 does not have any ip and I use only eth0.The error that appears is:
vif0.0: received packet with own address the source address
Ubuntu Networking :: Ubuntu And Win Won't Ping But Address Gets Assigned
Dec 4, 2010I have two machines
1. Ubuntu (static IP 192.168.1.1, running dhcp server)
2. Windows 7 (dhcp assigned IP based on mac - >192.168.1.2)
Now when I fire up both machines, Linux assigns IP to win BUT they dont ping. From ifconfig I know:
eth2 Link encap:Ethernet HWaddr 00:1b:21:7b:2d:68
inet addr:192.168.1.1 Bcast:192.168.1.3 Mask:255.255.255.252
inet6 addr: fe80::21b:21ff:fe7b:2d68/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
Now I get time exceeded icmp every time I try to ping both from linux OR windows...
Server :: IP Address In Ubuntu \ Dont Find Inet Address?
Aug 4, 2011If I give "ifconfig" in my laptop I get eth0,lo,wlan0.In that where do I find my Ip address in Ubuntu in 10.04. In eth0 I dont find inet address.Where can I find it?
View 2 Replies View RelatedProgramming :: Find The Mac Address For A Given Ip Address?
Feb 16, 2010I am trying to find out the mac address of the eth0 port on linux probe. This port is controlled by kernal and hence I don't have control over it. How do I find out the mac address of this port ? Is there any system call which will take the ip address and will do the lookup on the linux's ip table to get the mac address ?
View 6 Replies View RelatedCentOS 5 :: Device Eth0 Has Mac Address XX Instead Of Configured Address?
Oct 22, 2009after a yum update on my CentOS 5.3 I got this error when shutting down eth0 on reboot...
Shutting down interace eth0: Device eth0 has MAC address XXX instead of configured address XXX ignoring [FAILED]
CentOS 5 :: (98)Address Already In Use: Make_sock: Could Not Bind To Address [::]:80
Feb 11, 2010After upgrading centos from 5.3 to 5.4 I have had this error when trying to restart apache:
[root@server1 conf]# apachectl stop
httpd (no pid file) not running
[root@server1 conf]# apachectl start
(98)Address already in use: make_sock: could not bind to address [::]:80
[code]....
I did the following to resolve:
fuser -k -n tcp 80
Then I restarted apache just fine.
Fedora :: Phantom Port User - Address Already In Use
Oct 5, 2010I get this message when I try to start my Apache httpd server :
Code:
[root@user ~]# /etc/init.d/httpd start
Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:8091 [OK]
So I tried to identify the user of port 8091 :
Code:
sudo netstat -nap | grep 8091
sudo lsof -i:8091
But it seems that nothing is using port 8091! I'm running on Fedora 13 and I cannot use an other port for my server.
Hardware :: Using Printer Port - No Such Device Or Address
Mar 14, 2010I am trying to use the printer port. But, I get this
Code:
Broadcom EJTAG Debrick Utility v1.6r-hugebird
Failed to lock /dev/parport0: No such device or address
johnh@tux:~/Ubuntu One/hh$
run from johnh I permission denied sudo-ing I get above.
Networking :: Ifconfig Address With A Port Number?
Sep 24, 2010I'm trying to grok a problem I'm having with an embedded machine. I'm pretty sure I can track down the larger problem, but I came across a usage of ifconfig that I don't understand, and I'm pretty sure this is the command that is failing.
The command is: ifconfig eth0 192.168.78.20:9134
I understand how ifconfig works. What I don't understand is the :9134. I can't see anything in the docs about what this means. I know in most contexts it's a port number, but what does it do when bringing up a network interface? Does it limit it to only using port 9134?
Networking :: Port Forwarding To Arbitrary Address?
Feb 8, 2010Is it possible to forward a connection to a port to a completely unrelated external address? For example, I want to redirect ssh traffic to a.b.c.d to w.x.y.z. If w.x.y.z were an internal address and the machine was the router, this would just be plain old NAT port forwarding. But what if w.x.y.z is not an internal address? The reason I want to do this is I want to reassign a domain name example.com from ip address A to B, while allowing users to still ssh into A by using the [URL] domain name. Is this unreasonable? (I am guessing it is unreasonable, since the A wouldn't have it's gateway set to B, as is the case if A were in B's NAT'd internal network.)
View 2 Replies View RelatedRed Hat / Fedora :: Changing Outgoing DNS (port 53) IP Address With Iptables?
Mar 31, 2009I need to know what the Iptables "code" is to change the outgoing/Incoming IP for port 53 (DNS). I'm running CentOS on a dedicated server. I very familiar with Putty and SSH. So I don't need much details, I just can't figure this out. I asked my server providor but they deleted my ticket and didn't answer me.I tried this but am not sure if this correct of working?
View 5 Replies View RelatedGeneral :: Port Forwarding Ssh Error Bind: Address Already In Use
May 10, 2011- I setup port forwarding of openssh :
connect 1: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22222:ip-server1:161
- Then I setup second connection
connect 2: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22223:ip-server1:3306
- Openssh waring to me "bind: address already in use"
- So I think port 22223 have had another program use,I use command:
ps aux | grep ssh /* find process id of second connection */
kill -9 <process-id-second-connection>
netstat -an | grep 22223 /*find which program use port 22223> */
- but I can't find anywhat
- Then I run again command :
connect 2: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22223:ip-server1:3306
- And I receive a error from OpenSSH :" bind: address already in use"
Ubuntu :: Failed To Create UDP Socket (SIP) On Port 5060 Address
Mar 13, 2010I can't seem to get on my Twinkle SIP Phone, it says: "Failed to create a UDP Socket (SIP) on port 5060 Address already in use" after that message it brings me back to the window were I'm supposed to run my profile, how do I fix this?
View 6 Replies View RelatedGeneral :: List All Traffic From 1 IP Address But Filter Out Port 1057?
Jul 1, 2010I am trying to list all traffic from 1 IP address but filter out port 1057.I keep getting syntax errors. I've tried:
Code:
ngrep -e host xx.xx.xxx.170 not port 1057
ngrep -e port 1057 -x host xx.xx.xxx.170
ngrep -e not port 1057 -x host xx.xx.xxx.170
etc.
Programming :: Bind The Listening Socket To A Paricular Ip Address And Port?
Jun 26, 2011I am learning network prgramming in linux in c,and try to build a server and in this server I want to bind the listening socket to a paricular Ip address and port.Bind function is showing error,I did not want to use wild card. Here is the code.
#include<stdio.h>
#include<sys/socket.h>
#include<strings.h>
#include<netinet/in.h>
#include<arpa/inet.h>
#include<string.h>
[Code]...