Ubuntu Networking :: Share Wireless Connection With Xbox 360 Over Lan?
May 22, 2010I'm trying to share my wireless connection with my Xbox 360 over lan. Anyone know how to do this?
View 1 RepliesI'm trying to share my wireless connection with my Xbox 360 over lan. Anyone know how to do this?
View 1 Repliesshare wireless PC connection to xbox 360 via wired eithernet(10.10)?
View 1 Replies View RelatedI have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies View RelatedI'm trying to set up a wireless or wired network (wireless would be better...) to share my connection with my housemate, as well as with some devices. The only guide I found regarding this (I must admit, I didn't have much time to put into research), was dating back to 2005, and although doable, seemed somewhat confusing. Getting to the point: is there a way (maybe a standalone program, or some kind of plugin) to share a connection?
View 9 Replies View RelatedI am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View Relatedi have searched and searched for an answer but nothing i've found has worked for me what i have is an old computer with 2 network cards in it the 1 conected to the internet is eth1 one connected to the xbox via crossover cable is eth2, what i'm trying to do is share the internet connection to the xbox using ubuntu,i've tryed alreadyusing the network manager,using firestarter,ip tables,even nat,and all have failedi've been using ubuntu for 4yrs now, and i have always before been able to find answers to my problems by simply googling the answer. but this is one i can't seem to find an answer on.
View 3 Replies View RelatedI have a similar problem. My ubuntu box is set up as a dhcp router for my Xbox360, my xbox can get ip and DNS information from the computer, but it doesn't seem to get the right info. The ip address it gets assigned is out of the range I've set in etc/dhcp3/dhcpd.conf.
View 1 Replies View RelatedAlright, I'm running Ubuntu KK 9.10 and I've probably read every ICS tutorial on ubuntuforums. I'm running wireless internet via a Linksys router and have a LAN card in my system as well.
(lshw -c network)
Code:
I tried the easy route with 9.10 (setting my wireless to DHCP and LAN to share connection) and although Ubuntu recognizes the Xbox when its turned on (I get a nice notification saying my wired connection is active) the Xbox gets no internet, and doesn't even recognize the connection. (when I tested the connection it failed before it even hit network...)
I was wondering if it possible to use the Xbox 360 wireless adapter on the XUbuntu system? And if yes, what drivers would I need?
View 3 Replies View RelatedHow do i get my xbox 360 wireless adapter to work on ubuntu?
View 2 Replies View Relatedif i set up an older computer as a local DNS server for my home network, can i plug my wireless router into one of the ethernet ports to share the internet connection to my wireless devices?
View 2 Replies View RelatedI have got a laptop running Debian squeeze. I wish to share the wireless connection of the laptop (wlan0) to the ethernet port of the laptop, so that I can share the wireless connection to my desktop PC which is connected to the ethernet port.
[My desktop PC]---Ethernet---[My laptop]---))) WiFi )))---[Public network/ ISP]
I have read the article on Ubuntu community: [url]
I followed the steps, and the /etc/network/interfaces file on my laptop is:
Now the situation is: My laptop can connect to Internet (i.e. ping debian.org from laptop is fine), my desktop PC can connect to my laptop (i.e. ping 192.168.1.1 from desktop PC is fine). However, the desktop PC cannot reach the Internet.
I also read the information on Debian Wiki: [url]
It seems I must install and configure ebtables before sharing my wireless connection to ethernet port. Is it true? (But why the article on Ubuntu community doesn't mention it?) Or I just made some mistakes?
I just got a new XBox 360, and I would like to get it connected to the internet.
I cannot run hardline Ethernet to it, as the nearest line is across the house.
I have, in the past and on friends machines, had success setting up a shared internet connection from my Ubuntu box to the XBox in question. I would always follow this guide, and it would work right away. [url]
Recently, I have purchased a new wifi router. This has changed the DHCP makeup of my home network from 192.xxx.xxx.x numbers to 10.0.0.x. I dont know why, but thats how the Netgear router set things up. I have reserved addresses 10.0.0.(2-4) for specific computers because of remote access needs, anything above 10.0.0.5 is empty.
Following the guide that I linked above, I cannot get the XBox connected.
I believe that the fact that the rest of the network is listed under 10.x.x.x may be the culprit, as the DCHP server on MY computer would be assigning the same Local IP as the other devices on the network. (I.E. Giving the XBox 10.0.0.2 and my computer 10.0.0.2)
To clarify how my network is connected; this is how the network is setup:
Internet/Phone line ---> Verizon Westell DSL modem in 'bridged mode' (IP 192.168.x.x) ----> Netgear WGR614v10 Wireless (IP 10.0.0.1) ----> Computer connected via wifi (10.0.0.x) ====> Shared connection to XBox (IP ? supposedly 10.0.0.x)
Somewhere between the computer and the shared connection, The xBox is getting lost, and cannot connect. The troubleshooting shows that it could connect to the network, but it cannot access the internet as a whole.
A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
[Code]...
I have a Dell Studio 1558 with a Broadcom wireless adapter. It's a brilliant piece of hardware and love everything about it except some of it's overheating problems. When I first bought it with Windows 7 pre-installed, it had an application installed on it called PeerNet, which creates a wireless network for other computers (and wifi-enabled phones) to connect to it. Simultaneously, you could also share your internet connection with these users. The internet connection could be either wired or wireless.
My question is, how do I go about finding the same functionality on Ubuntu since I know my hardware is capable of it. (I believe in Windows 7, it creates a virtual adapter that it uses) I know there are ways to share a WIRED internet connections with some help with the terminal, but I haven't found a way to share a WIRELESS internet connection. The network manager allows you to create a wireless network but I'm unable to connect to another wireless network at the same time.
The reason I mentioned mobile phones is because my mobile (Android 2.2) is unable to find a wireless network created by the network manager, but another laptop is (without internet access that is). I've noticed that mobile devices and iPod's aren't able to find ad-hoc networks on Windows PCs as well.
I hope someone out there will be able to find a solution for me (and surely others as well!) Maybe the final release of 11.04 will help out later if nothing turns up now.
I were to download a demo from [URL] would it save the demo to my laptop and then I could transfer it to my Xbox via Ethernet cable, even though my laptop has Ubuntu on it or does it have to be Windows computer?
I ask, b/c either way it is just a file on my laptop, regardless of the OS.
So, what does the community think?
I'm trying to connect two PCs to the Internet (or at least to create a local network) using a crossover cable. My main PC (the one that has two ethernet adapters and is connected to the Internet) runs Windows 7 and my secondary PC runs Ubuntu 10.04.Unfortunately, it doesn't work. Both systems send out packages but don't receive anything. How can I possibly fix this, so that I could use LAN and share the Internet connection between PCs? Does Windows need special software to recognize Ubuntu (or the other way around)?
View 1 Replies View RelatedI have a small wireless network running IPv6 connected though a 802.15.4 usb stick, and a network connection through eth1. I can access the nodes on the wireless network from my computer, but not from any other on the wired LAN. Also the nodes on the wireless cannot see even the address of eth1. I'm guessing i have to forward all packets from the wireless to eth1 in some way, but am unable to find an guides for this with IPv6.
View 7 Replies View RelatedIts a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
My problem is exactly the same as [URL]
but I am stuck at the last hurdle
here are the output of the command that helped to solve the case in the previous post:
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:1b:77:d2:59:55
inet6 addr: fe80::21b:77ff:fed2:5955/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code].....
I have also tried sudo dhclient but it hasn't helped and I am still unable to connect to the internet
I am wondering how I can share connection with my IPv6 connection.
I am using slackware and ip6tables so far. But the problem is that IPv6 or ip6tables has no "-t nat", so how could I just simply share Internet with the computers behind the firewall?
From the command shell, how do I get to a network connected drive?I do a "Connect to Server" -> "Windows share" and connect to one of my Windows XP systems. Everything is fine. But how do I get to that drive from the command line prompt so I can do terminal commands or open files programmatically (hmmm is that spelled right?) Thus far, I see no way to do it.
View 5 Replies View RelatedI have network manager applet 0.7. How to create a wireless network? I have an internet connection and I want to share it with other computers wirelessly.
View 2 Replies View Relatedi have two machines both on ubuntu 10.4 connected to a network via port switcher, 2 rj45 network cables auto eth0 is setup to share with other computers, i can ssh in and out of both, so the network is all running but i want to know how to share my single dongle internet connection between the 2 computers
View 4 Replies View RelatedI have a Dell Inspiron 1525 running Jaunty Jackalope. I have a good working wireless connection.
My daughter has a lot of iPod tunes stored on an old white chiclet Macintosh, which she needs to download to her iPod. Because the iPod is "corrupt" (meaning it was last connected to Windows!), we need to connect to internet.
Simplest way to do that would SEEM to be to plug an Ethernet cord between the two machines and let her Mac access internet via this Dell.
My experience with ethernet is, either it works out of the box, or it doesn't. If it doesn't, I have no idea how to make the connection work.
What do I have to do on BOTH the Jaunty and OSX sides to make the connection?
I seem to be having quite a big problem with Internet sharing. After doing a clean install of Lucid, I tried to set up a shared connection between my computer and my Roku set-top box. I have noticed that I am only able to set up a connection profile in Network Connections under the Ethernet card with the active Internet connection. That is, whenever I try to set up a connection, I am not given the option of using the second Ethernet card. Thus I can't share the network connection. Can someone PLEASE help me? The IRC has been completely useless.
View 9 Replies View RelatedI have two wireless cards on my pc. One connected to the Internet and one free. I would like to connect the free one to a adhoc network with my netbook to share my connection because my netbook cannot reach the other side of my home.
View 1 Replies View RelatedI want to share my internet connection with my netbook which has a Win 7 starter OS. This is what I did: in Network Connections I set the IPv4 Setting of my network card to shared with other computers, plugged in the network cable into both machines, and now they both see a connection. Win 7 only sees the connection as Unidentified network with "No internet access". What should I do?
View 3 Replies View RelatedI have an internet connection called 'tether0' in ifconfig.I also have a connection eth0 which is connected to a wireless router. I'd like to share the 'tether0' connection with the wireless router, so that wireless clients will access the internet through tether0.The guides I've seen don't seem to apply to my situation.how I should proceed? I'm not very experienced with networking,but understand most of the basic and intermediate terminology.
View 1 Replies View Related