Ubuntu Servers :: Share The Internet Connection To Wireless Devices?
Mar 27, 2010
if i set up an older computer as a local DNS server for my home network, can i plug my wireless router into one of the ethernet ports to share the internet connection to my wireless devices?
View 2 Replies
ADVERTISEMENT
Jan 9, 2011
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies
View Related
Jun 21, 2009
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
View 3 Replies
View Related
Feb 4, 2010
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies
View Related
Feb 16, 2011
I have two systems in both systems there I installed ubuntu 10.10. I need to know how to share an internet connection over the two systems at a time?
View 9 Replies
View Related
Jul 19, 2011
I am back to the same issue internet connection sharing using NAT .I use the following command it work for me for an hours.
Code:
sudo iptables -A FORWARD -o eth0 -i eth1 -s 192.168.0.0/24 -m conntrack --ctstate NEW -j ACCEPT sudo iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT sudo iptables -A POSTROUTING -t nat -j MASQUERADE
Code:
sudo iptables-save | sudo tee /etc/iptables.sav
Edit /etc/rc.local and add the following lines before the "exit 0" line:
Code:
iptables-restore < /etc/iptables.sav
Code:
sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
After restarting my server NAT is not working .client system can ping to my server through the server's eth1 ip but Internet is not accessible to the client pcs.
View 2 Replies
View Related
Jun 21, 2011
I have three machines(2x Dell Optiplex GX620, 1x Dell Optiplex 330) and I salvaged a D-Link Ethernet card from another PC, and I want to put it in the Optiplex 330. I was wondering if there was something I needed to do before I take the server offline and install it and how do I find the drivers for it? Or does Ubuntu go ahead and do that?
And my second question is, once I get the network card installed, how do I share the internet connection of that machine with another server? And how would I SSH in to the server connected to the other? I'm guessing that I have to set up some ports to do that, but I don't know how as I am very new to the Ubuntu Server scene and I am doing this for educational purposes.
View 3 Replies
View Related
Mar 25, 2010
I have recently installed Ubuntu 8.04 LTS Server Edition, with no GUI. I can't connect to internet, and therefore I can't use commands like "apt-get update" I do not even know how to configure this server yet. I need my server to connect to Internet through my wireless card (I have no cable connexion for now).
View 4 Replies
View Related
Dec 29, 2010
I did search, but could not find a solution.Right I've installed Ubuntu Server 10.10 on an old machine, installed fine and the system is running. I have a windows 7 desktop that is connected to the internet via wireless. The desktop then has an ethernet connection which is shared to the ubuntu server. The network looks like this.
Modem > Router > Desktop > Switch > Ubuntu Server My problem here is that there appears to be no connection from the server to the desktop. The server cannot connect to the internet.
When i ifconfig the ubuntu machine shows.eth0 link encap:Ethernetinet address: 192.168.137.2 Bcast:192.168.137.255 Mask 255.255.255.0 However on the windows desktop (the machine sharing the internet) these are the details for the connection to ubuntu server.ip 169.254.170.50 mask 255.255.255.0
is this a dhcp problem? is my server configured wrong?
View 4 Replies
View Related
Jul 5, 2011
OpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
View 7 Replies
View Related
Mar 12, 2011
I have a Dell Studio 1558 with a Broadcom wireless adapter. It's a brilliant piece of hardware and love everything about it except some of it's overheating problems. When I first bought it with Windows 7 pre-installed, it had an application installed on it called PeerNet, which creates a wireless network for other computers (and wifi-enabled phones) to connect to it. Simultaneously, you could also share your internet connection with these users. The internet connection could be either wired or wireless.
My question is, how do I go about finding the same functionality on Ubuntu since I know my hardware is capable of it. (I believe in Windows 7, it creates a virtual adapter that it uses) I know there are ways to share a WIRED internet connections with some help with the terminal, but I haven't found a way to share a WIRELESS internet connection. The network manager allows you to create a wireless network but I'm unable to connect to another wireless network at the same time.
The reason I mentioned mobile phones is because my mobile (Android 2.2) is unable to find a wireless network created by the network manager, but another laptop is (without internet access that is). I've noticed that mobile devices and iPod's aren't able to find ad-hoc networks on Windows PCs as well.
I hope someone out there will be able to find a solution for me (and surely others as well!) Maybe the final release of 11.04 will help out later if nothing turns up now.
View 7 Replies
View Related
Jul 10, 2010
I'm trying to connect two PCs to the Internet (or at least to create a local network) using a crossover cable. My main PC (the one that has two ethernet adapters and is connected to the Internet) runs Windows 7 and my secondary PC runs Ubuntu 10.04.Unfortunately, it doesn't work. Both systems send out packages but don't receive anything. How can I possibly fix this, so that I could use LAN and share the Internet connection between PCs? Does Windows need special software to recognize Ubuntu (or the other way around)?
View 1 Replies
View Related
May 30, 2010
How do i get Ubuntu to use the wireless signal i am using now and output it on the Ethernet Card. Ubuntu knows how to access the web through them both. It just wont share the connection.
View 1 Replies
View Related
Mar 12, 2010
I have network manager applet 0.7. How to create a wireless network? I have an internet connection and I want to share it with other computers wirelessly.
View 2 Replies
View Related
May 30, 2010
i have two machines both on ubuntu 10.4 connected to a network via port switcher, 2 rj45 network cables auto eth0 is setup to share with other computers, i can ssh in and out of both, so the network is all running but i want to know how to share my single dongle internet connection between the 2 computers
View 4 Replies
View Related
Aug 12, 2010
I have two wireless cards on my pc. One connected to the Internet and one free. I would like to connect the free one to a adhoc network with my netbook to share my connection because my netbook cannot reach the other side of my home.
View 1 Replies
View Related
Aug 18, 2010
I want to share my internet connection with my netbook which has a Win 7 starter OS. This is what I did: in Network Connections I set the IPv4 Setting of my network card to shared with other computers, plugged in the network cable into both machines, and now they both see a connection. Win 7 only sees the connection as Unidentified network with "No internet access". What should I do?
View 3 Replies
View Related
Oct 29, 2010
I have an internet connection called 'tether0' in ifconfig.I also have a connection eth0 which is connected to a wireless router. I'd like to share the 'tether0' connection with the wireless router, so that wireless clients will access the internet through tether0.The guides I've seen don't seem to apply to my situation.how I should proceed? I'm not very experienced with networking,but understand most of the basic and intermediate terminology.
View 1 Replies
View Related
Dec 18, 2010
I'm kinda new to ubuntu. I have no knowledge working on linux machines I started to use ubuntu just over 3 weeks back and it's quite good over windows machines. I want to know how can I share my pc's Internet connection with my mobile phone (Nokia N70). I've done this with my windows machine with the help of gnubox and mRouter. I want know is there any similar simple way of doing it on ubuntu? I'm having ubuntu 10.10.
View 2 Replies
View Related
Feb 19, 2011
In the documentation at [URL] it says
Quote:
Note: To clarify the above example here is an example configuration that will work - * 1. You are already connected to the internet using your wireless on port wlan0 * 2. The ethernet port eth0 is connected to the PC that needs to share your internet connection (or you could wire eth0 to a router for multiple machines)
I am trying to do precisely this, with my laptop aready connected to the internet via my HTC Hero on port usb0, and the router needing to share the connection plugged into the laptop's port eth0. Port eth0 is set to "Shared" as the doc describes.
The router in question is an old WiFlyer pocket AP, which has a fixed and unchangeable IP address on its wired port of 192.168.7.77. What happens is that when I plug it into the laptop's eth0, NetworkManager pops up the "eth0 Connected" message...and then "Disconnected"...and then "Connected"...and then "Disconnected"...etc.
I want to be able to share my cellphone's Internet connection through the laptop and out into the WiFlyer so that others can get a wireless connection in a location that has no other form of connectivity.
[Rooting the Hero and making it an AP won't work: it can't run Froyo and it can't broadcast wireless.]
View 6 Replies
View Related
Mar 30, 2011
I am running Ubuntu 10.10 on several desktops but they are not close to my router. I would like to use a wireless connection to go from my router to my Ubuntu laptop, then a wired connection from my laptop to a desktop. My laptop is WiFi enabled and has an ethernet connection.
View 1 Replies
View Related
Aug 5, 2011
After some fiddling around, I have come to the conclusion my current wifi access point hates my other computer's Broadcom chip or the drivers thereof. So, my current idea is as follows. I would like to use my netbook to connect to the wireless network, and then connect my other computer to it through ethernet. My netbook is dual boot XP and Ubuntu (think Ubuntu is a version behind) and I would be fine to set up this sharing in either and just leave it on as a repeater station. My other computer is dual boot XP and Fedora and I would prefer this work to allow me to have network in both. I have a straight-through cable and have verified that my network card supports the automatic crossing over behavior.
View 1 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Aug 24, 2009
I have one Squid server which was configured to share internet on our networks192.168.20.0) PCs Serrver:192.168.20.25:8080It is working smoothly.Now my problem is that I has to configure one sub server that should allow internet to our 192.168.22.0 network with 3128 port. The sub server will get the connection from main server and it share the inter net to the internal network.
View 3 Replies
View Related
Feb 1, 2010
I have been trying off and on for weeks to share my Internet connection with a Windows XP client (netbook). While I can ping back and forth between the two machines, in the form of a ping test, I can't get to the Internet from the client, no matter what I try.
My Ubuntu 9.10 desktop (host) has two NICs, eth0 and eth1. eth0 connects to the Internet. eth1 goes to the Windows XP client. Regardless of whether I use an Ethernet crossover cable or a standard cable, I can get the two machines to talk to each other, but no further.
Things I already tried:
-Tried setting eth1 to "shared" mode in NetworkManager on the host. I set the Win XP machine to automatically acquire an address & DNS. Didn't work.
-Manually configured the IP settings on both machines, like this:
client:
address 10.0.0.2
subnetmask 255.255.255.0
gateway 10.0.0.1
[Code]....
Despite all of the above, I still cannot share the host's Internet connection with the client. I don't understand where the client's traffic is going, and why I can't share the connection. As far as I know, I am not doing any sort of firewalling or blocking on the host, so there is no obvious reason that the client's traffic simply disappears. I just know that whenever I open a Web browser on the client, all I ever get is error messages.
I have had no issues setting up a shared connection when the host runs Windows XP, so I am pretty sure there is no broken hardware causing the problem. Why can't I share the connection under Ubuntu?
View 1 Replies
View Related
Mar 16, 2010
My friend is trying to share his clearwire connection with me using Windows ICS. Using network-manager or wicd, I am unable to connect to his share. I am able to connect unencrypted with iwconfig, to the ad-hoc network, and then use dhclient to gain ip address.
I am not able to connect to WPA encrypted share using network-manager or wicd. nm-applet crashes when trying to connect. I am attempting to setup wpa_supplicant, but haven't got it working yet.As usual, the wireless networking out of the box experience in Ubuntu doesn't work. This is extremely frustrating. If Ubunut's goals are to be the default desktop, then these guys need to get wifi that "Just Works"...
View 3 Replies
View Related
Mar 20, 2010
I want to share my internet connexion via ad-hoc WiFi. If it's unsecured, it works fine, but when I use WPA encryption, it doesn't work anymore! I can connect from my iPod touch, but no internet. I connect to the internet from my laptop, via eth0 I want to share my internet connection via wlan0 I have no idea what's wrong
View 1 Replies
View Related
Jul 24, 2011
I have two laptops (Dell & Lenovo), both have wifi.
I am having one wired Ethernet connection.
I want to share this Internet connection among two system , to access Internet from both the system.
I had tried by creating a wireless network, but was not able to do so.
View 3 Replies
View Related
Apr 30, 2011
I am trying to share vpn connection between my network without any luck.
Here is how my network is setup.
Main DNS server with 2 NIC's:
Code:
Code:
My iptables
Code:
With those setting i am able to share my internet connection, however, when i try to connect to vpn server using openvpn it seem i am connect to the vpn server but i dont have any internet internet connectivity even on the dns server.
Here my openvpn log
Code:
View 9 Replies
View Related
Oct 21, 2010
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies
View Related