Ubuntu Networking :: Xbox 360 Wireless Adapter ?
Sep 17, 2010I was wondering if it possible to use the Xbox 360 wireless adapter on the XUbuntu system? And if yes, what drivers would I need?
View 3 RepliesI was wondering if it possible to use the Xbox 360 wireless adapter on the XUbuntu system? And if yes, what drivers would I need?
View 3 RepliesHow do i get my xbox 360 wireless adapter to work on ubuntu?
View 2 Replies View RelatedAlright, I'm running Ubuntu KK 9.10 and I've probably read every ICS tutorial on ubuntuforums. I'm running wireless internet via a Linksys router and have a LAN card in my system as well.
(lshw -c network)
Code:
I tried the easy route with 9.10 (setting my wireless to DHCP and LAN to share connection) and although Ubuntu recognizes the Xbox when its turned on (I get a nice notification saying my wired connection is active) the Xbox gets no internet, and doesn't even recognize the connection. (when I tested the connection it failed before it even hit network...)
I'm trying to share my wireless connection with my Xbox 360 over lan. Anyone know how to do this?
View 1 Replies View Relatedshare wireless PC connection to xbox 360 via wired eithernet(10.10)?
View 1 Replies View RelatedI recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
I have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:
Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)
[Code]....
I want to be able to connect through the RealTek wireless adapted.
I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
Ok, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.
PS: when I try sudo ndisgtk it comes up with command not found.
I have installed ubuntu lucid 10.04 release, and i want to install a wireless adapter usb or pci in my desktop. Can somebody recommend me a model that works fine?
View 3 Replies View RelatedI have tried a couple of wireless adapters (USB dongles) but none of them work all that good on Ubuntu. I keep loosing connexion when on Ubuntu while on Windows (dual boot) there never seems to be any problems, so signal strength is probably not the issue. I bet it's a drivers problem so what I want to know is which adapters work really really good/great/fantastic on Ubuntu? The first option, wext, was chosen when I installed Wicd (running side by side with GNOME Network manager).
View 9 Replies View RelatedI've got a couple of old PC's running Ubuntu but I want to give them wireless capability and move them to a different room. What is the easiest wireles adapter to use? I'm thinking USB would be easier than opening the boxes to install cards, plus I could buy one adapter and try it with both PC's to make sure it works, then buy a second one once I know it works.
View 1 Replies View RelatedAs I am struggling to get my Netgear WNP111 to work with ubuntu 8.10 ,can someone recommend an adapter that will work out of the box with ubuntu 8.10 .
View 7 Replies View RelatedI am trying to get the above wireless adapter o work with Ubuntu. I have installed ndiswrapper but I am unsure what windows driver I need that will work with it.
When I type lsusb I get the following: Bus 001 Device 002: ID 0df6:0042 Sitecom Europe B.V.
I tried searching the ndiswraper site but all I could find was Sitecom WL-344 300N X2 Wireless USB Adapter that pointed me to Driver: rt2870.inf and rt2870.sys (on Windows XP).
I am not sure if this will work or where to download these files, so I was wondering if anyone else has this adapter that could shed some light onto how to get it working.
Edit: I just tried the rt2870 driver and it didnt work
My netbook have an internal wireless receiver, but from my room it doesn't work well, so I bought a TP Link TL-WN422G hoping it receives better. Ubuntu sees it but I don't know how to force using it.. I attach lsusb with peripheral in bold:
View 3 Replies View RelatedUbuntu 10.04 does not recognize my wireless usb adapter at all. Its a linksys WUSB100 ver.2.
View 1 Replies View RelatedI've recently installed 10.04 LTS on an old laptop. I've not been able to connect to the internet at all. I finally finagled some drivers for my Broadcom BCM4318, and seemed to get everything in order, but it says that the "Radio hardware status changed to DISABLED"
Then, I pushed the button on the laptop to turn the wireless on, and it worked! But then as soon as I let the button go, it turned off. Is there some way to toggle it so it's always on?
I bought a USB adapter for my wireless connection at home. But there is no drivers for the adapters in ubuntu, there is only windows executable files. I am using ubuntu 10.04. I spend around 40$ for the adapter. Some one please help me how to work this out. Its NP910n netcomm adapter. I am using ubuntu10.04.
View 1 Replies View RelatedPreviously I had my desktop hooked up to a nearby router via an ethernet cord with my parents' computer having a wireless usb adapter to connect (This thing: [uRL]). We just moved and our setup has reversed (router is near their computer, I am using the usb adapter). I just installed the latest Ubuntu and now I can't get the usb adapter to work. I'm very new to Linux and I have no idea what to do. I think this is the same usb adapter.
View 1 Replies View RelatedRecently I purchased for few bucks on eBay a wireless network adapter with name "EDUP 802.11N". This thread explains how to setup this device on Ubuntu. I inserted USB wireless adapter on Windows XP and it was recognized as "Realtek RTL8188SU Wireless LAN 802.11n USB 2.0 Network Adapter". Windows didn't have any problem to install its driver automatically but for Ubuntu I had to give some additional effort.
After that I went on Realtek official site (www.realtek.com.tw) where I found that this device is supported on linux platform, downloaded and compiled linux driver. This driver (kernel module) is for kernels from 2.6.18 ~ 2.6.33. Unzip this file and in "drivers" subfolder there is driver archive (tar.gz).
Code:
>cd rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100625/driver
>tar zxvf rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20100625.tar.gz
>cd rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20100625
>make
>./clean
[Code]...
As the title reads. My wireless adapter does not work when I boot from the Ubuntu 10.04 LiveCD. The adapter in question... tricky. It's this one: [URL]...- however, aside from a mention in one of the comments to a "Ralink RT2780", I don't see any reference to a make/model.
The software that ships with this product is indeed Ralink-branded, but again there's no mention of a specific make/model. So I assume it's just a driver issue, however I've no idea where to begin in my search for one as I can't identify its model number.
I am newbie at linux and Ubuntu and I have some problems enabling my wireless. I have spent many hours searching for solutions and couldn't find one for me (maybe don't apply it right - I am newbie). I have HP Pavilion dv6, dual boot Win7 and Ubuntu. At Win7 wireless is ok but at Ubuntu I can't enable my wireless adapter, so my laptop can't recognise any wireless network.
View 3 Replies View RelatedI love ubuntu, but I don't know how to use a command line to save my life. I'd just as soon never use a terminal ever. My big issue is I cannot get my wireless adapter to work. It is a keebox w150nu, which is based off the Ralink RT3070 chip. I am willing to use command line to get this thing to work because I love ubuntu to death, but everything I have tried has failed. I have gone to the Ralink website and downloaded the Tar.bz file from there. t
The file I grabbed is the third one down from the top: [URL].
I have absolutely no idea what to do from there with the file however. Please understand that I have zero idea how to use command line in a terminal. What I have to do to make this work? Is there a usb wireless N adapter that works straight away with ubuntu 10.10, as in I plug it in before the install, and it is immediately recognized and works immediately?
I have HP Pavilion dv2860ee laptop with an intel wireless adapter ipw3945 on it. I recently installed ubuntue 10.10 on the laptop but ubuntu does not recognize my wireless adapter. I'm some how new to ubuntu but I almost tried everything that I could find from google to install drivers but they didn't work and wireless adapter is still unclaimed.
View 9 Replies View RelatedBus 001 Device 007: ID 0bda:8171 Realtek Semiconductor Corp. RTL8188SU 802.11n WLAN Adapter this adapter shows up in network manager when connected to computer but doesn't detect network and cant connect to any network I have setup in nm, the adapter works fine in windows and it's supposed to work in linux or do I have to install drivers?
View 8 Replies View RelatedFirst off my wireless use to work on the live usb and now doesn't. It also has changed behavior in windows where the button to activate/deactivate is no longer flashing blue for orange while booting windows and then going solid blue by the time it gets to where I type my password in. Now it no longer does the flash and when I get to where I enter my password I have to push the button twice to get it blue (active). If this can't get resolved can you recommend a wireless N usb adapter that will work both in windows 7 and Ubuntu.
:~$ lspci
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation Device 075e (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1).....
:~$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Failed to read scan data : Network is down
ubu version
:~$ uname -mr
2.6.35-24-generic i686
:~$ sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... [ OK ]
I'm trying to use a D-Link DWA-130 wireless adapter with my desktop running Ubuntu 10.10. I've been scouring the forums (and google of course) and really can't understand why it's not working.The output from "iwconfig wlan0 is:Code:wlan0 no such deviceSo here is where I ask the stupid question: must you have a wireless card in the computer to use a wireless usb adapter? I built the computer myself you see and was looking to save some money.
View 9 Replies View RelatedI bought the Asus n13 and am ready to pull my hair out. I've followed the posts and cannot get it going so I'm taking it back. I need something that will just work. HP s5747 computer.
View 1 Replies View RelatedCurrently booting off a disc and I'm unable to connect to our home network. Do I need to update drivers for this particular card? The netbook I'm using is a 'Kogan' with an Atom N270 1.6Ghz processor.
View 9 Replies View Related