My plan is to set up a simple webpage using no-ip. I already made an account and downloaded and configures the client. Now I want to make the actual website (hosted on my local machine). How would I do that? I assume I would need a hosting software.
View 2 RepliesAll i really want to do is be able to ssh into my other linux system. I am not interested in internet sharing, or even file sharing.[linux laptop with unused ethernet port]-windows-mobile-ppc connected by usb for internet-tehtering [linux running on my wii accross the room]-nintendo lan adapter.I want to be able to ssh login to my wii, from my laptop. That is all i want. Do i need a router in between the two for this, or can i just connect them with ethernet cable?No samba, no nfs, no fancy stuff. Just want to be able issue commands from laptop to my wii.
View 9 Replies View RelatedI have three PC's. PC-1 is a newish Dell Vostro 320 running Win 7 as the prime OS with Ubuntu Linux 10.10 dual boot under the control of EasyBCD. PC-2 is a Dell Inspiron 6400 running Ubuntu Linux (10.10). PC-3 is an oldish Dell Inspiron 6000 laptop dual booting Win 7 and Ubuntu 10.10. All three PC's share a DSL connection to our ISP and network using the wireless router capability of the DSL box (a Billion 7401 VGP-M). All three PC's can access the internet using the DSL box both wired and wirelessly under Windows or under Linux. PC-1 is the primary PC and runs Win 7.
PC-2 (Ubuntu 10.10) is running fantastically well and can access PC-1 running Win7 as a member of WORKGROUP for print sharing and for file sharing. The primary PC-1 can also see the files on PC-2 as a member of a Windows WORKGROUP. Simple home networking is working as it should with this setup (PC-1 under Win 7 and PC-2 under Ubuntu 10.10). This has been like this since the installation of Ubuntu on PC-2, which included setting up network printing from PC-1 (Win 7) under Samba.
The problem is thus: If I boot PC-1 or PC-3 up under Linux, I lose all networking capability between the three PC's including print and file sharing, but they can all access the internet through wireless or wired connection. I have configured Samba and done all the home networking troubleshooting especially:[URL]..All to no avail. As I said, my aim to ditch Windows and move all three PC's to Linux but I can't do this unless I can get Linux home networking working properly. By properly, I mean all PC's running Linux or two under Linux and one under Windows 7 and be able to share files and a printer attached to PC-1. I am a Linux virgin and am hoping that a knowledgeable person can tell me what's going wrong and point me to setting up a simple home network under Linux. It shouldn't be this hard.
I have a second HD in my computer for doing a backup onto. All I want is to select a couple of my documents folders and have them copied to it daily. I would like it to add new files and update newly modified ones. I don't want it encrypted or archived, just a basic copy.
View 4 Replies View RelatedI'm trying to set up a simple backup script with cron.
In "crontab -e" (and sudo crontab-e - I tried both) I enter "0 22 * * * /home/USERNAME/.backup.sh", with the hope that it will run the script at 10pm each day. The srcipt work fine if I run in a terminal. why it won't work? It's bound to be something obvious....
I am trying to make a simple script. The first part works to untar a file. When I try to CD from within my simple script.sh file to the new directory just untared and run the setup commands it just errors out and says something about having no directory or something and saying that it cant make without configuring or something.
#!/bin/bash
for file in *.tar.gz
do
tar -xvzf $file
done
cd some-directory
./configure
make
make install
I have two computers on my home lan I am trying to share files between...My desktop which is running Ubuntu Server 10.10 (x64) with a GUI, and my laptop which is running Ubuntu Desktop 10.04. I have tried a million different tutorials regarding SAMBA setup, but they never work.
In addition, most of those tutorials are geared towards hybrid Linux/Windows environment. I do not have any microsoft product in my home. I have created the share on my server, but I'm not sure how to connect to it from the laptop (once again at this point in the tutorials it explains how to access it from a Windows PC). I tried using the menu doing this:
Places-->Connect To Server-->Service Type-->Windows Share (for the server I tried my server hostname and IP) to no avail. Does anyone know of a recent step by step tutorial for setting up a complete Ubuntu environment? Is there a simpler method I can use since I do not particularly need to use SMB protocol?
All I want to do is share my music folder from my server so I can access it (from the same LAN) on my laptop...Arrrghhh frustrating.
I've installed Fedora 12 Desktop in order to develop a simple website, which is going to use some PHP.
I will need:code editor to write html/css/php local apache server running php browser how to get me up and running in no time with least extra configurations.
Bonus: I'm going to run all this in a virtual box on my company computer. I'd love to be able to stay undercover with this, so if one of you can tell me how to configure the apache server not to be too visible to the company network/domain, that'd be excellent.
I've decided to try and setup a simple home server with Debian. I can either install the OS on a compact flash card and use hard disks as storage, or just install everything on the hard disk. I'd also like to set up a software raid for mirroring. I've never done this before, and most recently updated documentation i've found is for ubuntu. Any advice or good links someone can point me to on how to set up raid? I'd like to encrypt my hard disks but I don't know what my options are. It seems like people point to truecrypt, but i'm wondering what else is out there or if people have any advice on this. Would it be feasible to do this if I install the OS on a compact flash card and?
View 3 Replies View RelatedIs the term a 'simple SMTP relay' a contradiction in terms?!I have an elderly Dell server on which I have just made a fresh install of 10.04 LTS server. I had 8.04 running on it for a long time, but I haven't tried an SMTP server before. It is a headless server with CLI (no GUI) and the latest version of Webmin installed.I have a basic LAMP server installed for a few websites using PHPbb and Joomla, and also I run a Mediatomb server for our household. When I installed I also chose to install mail services, but these remain masked behind NAT at the moment
I now want to set up an SMTP relay server so when I am working away and using different wifi points or my notoriously unreliable 3G dongle I can always send emails through the home server (from my iPhone and my laptop) rather than having to look up the SMTP server for each ISP of the place where I am working.
What I want is an authenticated server which takes my email and redirects it to my home ISP's SMTP server. I need only 3 authenticated users to have access (myself, my wife and my son). I don't need (or want) any incoming mail services at all.
Useful modules installed are: Dovecot, Postfix, Procmail mail filter, PAM - but how do I set them up?
Is there any simple setup that I could do, preferably through Webmin, but I can handle CLI if necessary?
I have looked at the Ubuntu help pages, but it looks so complicated to set up something that seems like it should be so simple to me.
I am having a time at trying to get a simple FTP setup to my Var/www/html folder for my canned Joomla website. I can log in anon with no write permissions, but it will not log in using any users I have setup on the server. I've googled a bunch, but nothing to correct my 530 authentication failure when I try to log in as one of my user accounts for the server.
View 2 Replies View RelatedI have recently upgraded to the new ubuntu 11.04 but am having problems with the internet. Often When I try to access a website it takes a long time (5-10 minutes) to load even google, and sometimes I just get the following error message:
This web page is not available. The server at google.com can't be found because the DNS lookup failed. DNS is the web service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Chromium from accessing the network.
Here are some suggestions:
- Reload this web page later.
- Check your Internet connection. Reboot any routers, modems or other network devices that you may be using.
- Check your DNS settings. Contact your network administrator if you're not sure what this means.
- Try disabling DNS prefetching by following these steps: Go to Spanner menu > Preferences > Under the Bonnet and deselect "Use DNS pre-fetching to improve page load performance".
- Try adding Chromium as a permitted programme in your firewall or antivirus software's settings. - If it is already a permitted programme, try deleting it from the list of permitted programmes and adding it again.
- If you use a proxy server, check your proxy settings or check with your network administrator to make sure that the proxy server is working.
- If you don't believe that you should be using a proxy server, try the following steps: Go to Spanner menu > Options > Under the Hood > Change proxy settings and make sure that your configuration is set to "no proxy" or "direct".
Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.
I have tried to access the internet using Chrome, Firefox, Konqueror, on the Untiy Desktop, and the Classic Desktop. I've checked my Proxy settings in Chrome (My main browser) and its set to direct internet connection. I've Disabled the UFW. I've edited the resolv.conf which initially showed:
Code:
# Generated by NetworkManager
domain HG532.com
search HG532.com
nameserver 10.0.0.1
and edited it to:
Code:
# Generated by NetworkManager
domain 10.0.0.1
search 10.0.0.1
nameserver 10.0.0.1
and even tried the Google DNS server:
Code:
# Generated by NetworkManager
domain 8.8.8.8
search 8.8.8.8
nameserver 10.0.0.1
But nothing works. It seems like When I initially log on to the internet it runs fine, but over the coarse of 10 minutes the page loading times go down then eventually I just get the above error message. There are other computers here running windows which connect through the same wireless fine.
I suspect the network card but I could be wrong.
Sometimes it doesn't load all of a webpage. In Firefox this results in only some of the page being displayed. In konqueror I get the "Connection to host www.page.invalid is broken" error message. The computer was doing this when running Opensuse 11.3 and continues to do it when running a clean install of Opensuse 11.4. I haven't tried a live CD of Ubuntu or something but that might be worth a go.
i'm a college student studying pc programing, and i was given today a special work and i have to program using miranda... which i've never used it >.< can anyone give me a hand to where to download, how to compile, and a simple tutorial for making a simple program or something?
View 3 Replies View RelatedGentlemen/Ladies; I checked the existing information on this site and found that it is pretty widespread and confusing to me. I am a Linux Newbie so please be patient. I use Mandriva Linux 10.0 and want to setup a simple file server. I also want to connect a Windows XP computer to access files on the Linux server. I have a spare router I can use. My ultimate goal is to learn MySQL and PHP programming; I am pursuing a Web Development curriculum at a local University but am just starting out.
Am I making sense and can I do it with the equipment I have? Can you point me to some resources,documents, etc. I can use to accomplish this?
I am doing samba file sharing. I got struct in problem relating reading passwords. I have to read password whatever user enter from web interface and process it. And through that password and username the user must log on from windows system. I have to write appropriate shell script for this. this is all i am doing for sharing files through samba.
View 2 Replies View RelatedI'm kinda new to all of this so I believe there's a simple solution for what I need I just don't know how it's done.
So I've configured a vsftpd, ftp server and enabled the anonymous user, therefore when I do
Code:
ftp://my_location.com
a directory like view is displayed in my web browser, corresponding to /srv/ftp where the files for the anonymous account are kept. Now I've made a little web page and I've copied it there, and can be executed running main.html so the address to access the web page would be
Code:
ftp://my_location.com/main.html
My problem is that I don't want anybody to have the possibility to see the directory like display so I'm wondering if when someone does ftp://my_location.com can't this be redirected so it will do ftp://my_location.com/main.html instead?, making the display of files and directories impossible from the ftp://my_location.com
I am trying to see whether wget can be used to generate actual url hits on a webpage. This does not look good so far�. I changed the following lines in /etc/wgetrc to:
Code: http_proxy=http : / /<proxy_ip>:<port>/ use_proxy on Output :
Code: root# wget -c <url>/ > /dev/null
--2011-01-16 12:26:38-- <url>
Connecting to <proxy_ip>:<port>... connected.
[code]....
2011-01-16 12:26:39 (88,9 KB/s) - `index.html.3' saved [50548] This does NOT generate a hit on the actual web page! It does not seem like the, > /dev/null part is working either... How can I get this to work?
there's a way to locally proxy or spoof just one web page. That is, use tsocks or hosts or something so that when I run an application that requests [URL], it receives /home/user/myversion.html, but for any other address it gets the normal page. Seems simple enough, if a little unusual... (I'm trying to work around a wget bug.)
View 10 Replies View RelatedI've read a lot about what SSH does, and how to do it on some networks, but none of them quite cover how to do it on just a network with a bunch of computers on it. I have no server or anything, just a router with some computer connected through ethernet or wireless. All of the Ubuntu computer have me as a user, and I want to be able to access any specific one. How do I do this? Also, if I'm not at home, how can I access any of my accounts from whichever computer I wish to access?
View 1 Replies View RelatedAs a user who is comfortable setting up a peer to peer network in Windows, how do I set up a simple peer to peer network with shares, on a standard network infrastructure (ethernet and basic dlink router), using Linux? I have two computers with Ubuntu 10.04, and would like to share files between them.Do I need to set static IP's? Why is only Windows network showing in Places/Networks?
Question two: I have 3 Windows computers (2 = XP, 1 = Win7) on my network, all with shares. When I try to access the windows shares from an Ubuntu machine, I can connect to some shares on some computers without being asked for credentials, however on other shares I am asked for credentials, but the credentials aren't accepted.I am assuming that domain = workgroup, so I enter in the workgroup name, but the dialogue refuses to let me in.
I'm trying to set up very simple UDP port forwarding, but can't seem to have good results. I read trough netcat and iptables manuals, but can't seem to figure things out. my setup is the following:
I have machine1, listening on UDP port 49000. I have machine_fw, which accepts connections on 59000, and forwards all this to machine1:49000 (and returning traffic too) I have machine2, which will connect to machine_fw:59000, and this way communicate at the end with machine1:49000, as machine_fw is taking care of forwarding is there an easy way to achieve this?
Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
[Code]....
Is there a simple way to connect to wifi with terminal?
View 2 Replies View RelatedI am using an Ubuntu 64 bit desktop. I need to create a network (the way you create a workgroup in windoz). I have two other machines running Ubuntu also and all connected to a 3-Com switch through ethernet. I would prefer not to use DHCP, and just have a simple network where I can share resources like drives and printers.
View 3 Replies View RelatedI have a Lexmark interpret S405 all in one. I got it to work as a wireless printer with the downloads provided by Lexmark. I installed simple-scan (sane) to enable scanning. Simple scan works, since it sees another all in one printer in our house and is able to scan. In addition, simple-scan does work on the Lexmark when I hook it up with a USB cable. HOWEVER, for some reason simple-scan does not see my Lexmark, despite the fact that it is seen as a wireless printer. So, the following discrepancy is present
a) My Lexmark is recognized by my computer as a wireless printer
b) Simple-scan does work, since it recognizes and scans another all in one and it does work with my Lexmark when connected with a USB cable
c) Nevertheless Simple-scan does not recognize my Lexmark all in one wirelessly.
My question to this distinguished form is: How can I make simple-scan recognize my Lexmark wireleslsy?
i have been looking for a simple network monitor daemon for ubuntu, for some time but have not found anything that suits my requirements and from what i've been reading online there seems to be quite alot of other people out there that are looking for the same thing. [URL]...for-linux.html page seems to have the most comprehensive list of similar products but if you read through all of them they don't seem to be what i'd imagine most home users need. here's a list of what i had in mind, if any one uses something that has these features or knows of something that might meet these requirements please let us know! 1)a small lightweight daemon that can be accessed via the panel on gnome 2)has thee ability to monitor eth or ppp (particularly internet traffic)3)can represent this data in a human readable format ie using megabytes and gigabytes 4)can store a history of how much data is being sent and received over long periods of time (like several months)
View 2 Replies View RelatedI've been trying to create a simple htb qdisc on my computer for learning purposes, but it does not seem to be working as I want it to. Ive made this script that creates a simple qdisc scheme and assigns filters to it:
tc qdisc add dev $ETH root handle 1:0 htb default 1
tc class add dev $ETH parent 1:0 classid 1:1 htb rate 20kbps ceil 0kbps
tc class add dev $ETH parent 1:0 classid 1:2 htb rate 30kbps ceil 100kbps
tc class add dev $ETH parent 1:0 classid 1:3 htb rate 10kbps ceil 100kbps
[code]....
I want it to simply shape packets on my single machine so that when I go to view web pages it will limit the download rate, same thing for p21 ftp and 443 https. I just want to try out how it works and use these trial to get a hang of it, but I noticed so far that its not limiting port 80 at all.
I made a simple proxy using netcat and it works great, the idea is to make the server and client communicate through two named pipes, file1, file2.
$ mknod file1 p
$ mknod file2 p
$ nc -l -p 12345 0<file1 1>file2 &
$ nc 192.168.2.118 80 1>file1 0<file2 &
The problem Im facing is that I cant seem to intercept the data going between the client and the server. I want to be able to have the data coming to the server in a variable, manipulate it and send it to the client, and the other way, have the data coming to the client in a variable, manipulate it and send it to the server.
Im running on an embedded device where tee, awk and many other commands are absent. how can I redirect the data to a variable, manipulate it and pass it to the other side, that is the question.
I am trying to deploy a very simple file server in my company's network.The goal is just to have a file server with DAT backup, nothing more.I managed to configure Samba to show a share visible in the Windows network, with free read and write to everyone. For this I configured "Autentication Mode = user", and read/write access to all users in the specified share.
Of course, I would like to have the possibility to establish permissions based in AD-users. For that, I tried to add my CentOS machine to AD.I followed the guide in:
[URL]
I can get the kerberos "kinit" command to autenticate in Windows AD: I can access the Windows machines in the network as administrator and "klist" shows the valid ticket.But, when trying the "join", I always get the "No logon servers" error.I googled around for this, and it seems that this is a common error and there is no "magic approach" for it...
So, my questions are:
- Can this be achieved only by the Samba configuration tool (Gui)? I think not, as we need to change kerberos settins
- What would be the correct settings for krb5.conf?
- Are there any other services/files needed to adjust?