I cannot connect my Sony Viao laptop to wireless. It just will not seem to connect. I am a bit of a n00b i am afraid so go easy on me
I have been through /sys/bus/pci/drivers/ipw2200 does exist. The Wireless has connected before but it has just seemed to have stopped. I have tried a few suggestions made in the forums and edited my interfaces config.
[code]...
I'm using Fedora 9 and I recently transferred my hard drive to a new laptop. Everything went smoothly except the wireless, which promptly broke. I played around with the network service and the NetworkManager service and chkconfig stuff and system-config-network, until I finally got it to work. Now I have wireless, but every time I shut down, I get some error-like messages:
"ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command." repeating every second for about 3 or 4 seconds before it finally does shut down.
These also appear in dmesg, usually about 20 in a row, thus my concern. My wireless device's interface is eth3. How to get rid of this message while still keeping wireless connectivity.
I've ben punding myhead on this issue. I've setup a new postifx server on rhel5. After editing the needed entries, i can't seem to send any outbound mails to yahoo or any other domains.My postconf -n is as follows:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
command_directory = /usr/sbin
[code]...
I've been using synergy on Ubuntu 9.04 and windows xp.Synergy 1.3.1 on both machines.My problem is that the server keeps cutting out. It seems to happen a lot when I watch flash videos on the server machine (ubuntu). This is what the server side looks like:
Code:
NOTE: synergys.cpp,500: started server
INFO: CServer.cpp,1141: screen "server" shape changed
NOTE: CClientListener.cpp,127: accepted client connection
[code]....
I dont think I usually get disconnected when doing other tasks. Mostly only when watching flash videos. Sometimes it doesnt automatically reconnect, and I have to kill synergys and restart it.
I recently switched to Linux ubuntu 9.10 the olny problem i have now is my wireless. i have IBM THINKPAD t43 looked online, the best thing is to install ipw2200. Which needs ieee80211 I downloaded ieee80211-1.2.18 but when i run "make" it gives me this:
Code:
Checking in /lib/modules/2.6.31-19-generic for ieee80211 components...
make -C /lib/modules/2.6.31-19-generic/build M=/home/mohammad/Desktop/ieee80211-1.2.18 modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-19-generic'
CC [M] /home/mohammad/Desktop/ieee80211-1.2.18/ieee80211_module.o
[code]....
I'm a root when i run the command from my understanding the problem is that there is a compiling error in ieee80211_module.c but i might be wrong!
I have been trying for months to get my wireless working on my acer laptop and I am now beyond despair. I using an Acer Extensa 67000 and here is what is at issue:
ubuntu@ubuntu:~$ lspci -nn | grep 'Wireless'
06:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
ubuntu@ubuntu:~$ lspci -vn On this one I posted just what I thought would be relevant:
[Code].....
I just removed Windows XP from my Dell Latitude D510 and installed Kubuntu 10.04 LTS lucid lynx. Obviously upgraded with apt.It seems to try to connect to the local AP (no encryption), but the connection fails.
View 8 Replies View Relatedhow to patch it. but the problem is, I can't find a working download link.
View 1 Replies View RelatedI've been trying since yesterday to install autoten per instructions below [URL]. However it has failed each time I have tried. Below is the terminal response.
Code:
[colyn@Fedora ~]$ su
Password:
[root@Fedora colyn]# rpm -Uvh [URL]
Retrieving [URL]
curl: (6) Could not resolve host: dnmouse.org; Connection timed out
error: skipping [URL] - transfer failed
[root@Fedora colyn]#
I am doing a copy/paste so I am not mis-typing the information. It says that the connection has timed out but I get the error message within 5 seconds of hitting enter.
my ipw2200 w-lan driver's been disconnecting frequently and I've done some research on it, while seeing that it's been a frequent problem, in the past.
View 9 Replies View RelatedI'm timing how long it takes to run a command foo. I'm looking to append the results from the time command to a file, and discard the results from the foo command. I tried the following, but it didn't do what I want:
$ time ./foo > /dev/null >> output_from_time_command.txt
I am building 1 system includes 1 firewall server using iptables 1 Webserver && 1 FTP server. On FTP server IP: 192.168.1.2 - GW: 192.168.1.1, I installed ProFTPD successfully. In LAN I do everything successful.
On Firewall server <IP PUBLIC> on eth0 && IP LAN eth1: 192.168.1.1
Iptables rules:
Code: # Generated by iptables-save v1.3.5 on Sun Mar 7 21:01:16 2010
*nat
:PREROUTING ACCEPT [950:126970]
:POSTROUTING ACCEPT [89:5880]
:OUTPUT ACCEPT [19:1342]
-A PREROUTING -d <IP PUBLIC> -i eth0 -p tcp -m tcp --dport 21 -j DNAT --to-destination 192.168.1.2:21
-A POSTROUTING -s 192.168.1.2 -o eth0 -j SNAT --to-source <IP PUBLIC>
COMMIT
# Completed on Sun Mar 7 21:01:16 2010
# Generated by iptables-save v1.3.5 on Sun Mar 7 21:01:16 2010
*filter
:INPUT DROP [1599:157409]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [232:34452]
-A INPUT -i lo -j ACCEPT
-A INPUT -i eth1 -j ACCEPT
-A FORWARD -i eth0 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -o eth0 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o eth1 -j ACCEPT
COMMIT
# Completed on Sun Mar 7 21:01:16 2010 In FTP server i access to internet good.
I check port 21 on IP PUBLIC , it's return Open.
But when I using ftp command then it's show Code: Connected to <IP PUBLIC>.
220 ProFTPD 1.3.3 Server (FTP Server) [192.168.1.2]
User (<IP PUBLIC>:(none)): longvnit
331 Password required for longvnit
Password:
230 User longvnit logged in
ftp> dir
200 PORT command successful
Aborting any active data connections...
ftp> bye
C:Documents and SettingsLONGVNIT>ftp <IP PUBLIC>
Connected to <IP PUBLIC>.
220 ProFTPD 1.3.3 Server (FTP Server) [192.168.1.2]
User (<IP PUBLIC>:(none)): longvnit
331 Password required for longvnit
Password:
230 User longvnit logged in
ftp> dir
200 PORT command successful
425 Unable to build data connection: Connection timed out
ftp> dir
200 PORT command successful
425 Unable to build data connection: Connection timed out
ftp>
in the middle of script, i need to send the output of (send command on line 8) to a file
#!/usr/bin/expect
spawn telnet 172.20.64.133
expect "ENTER USERNAM <"
[cod]....
i treid the below on line 8 :
1- send "show command;
" > logfile.txt : gives an error extra character after the "
2- logsave logfile.txt 'send "show command;
" ': error invalid command
3- i simply tried to send the output of the whole script to file logsave /home/logfile ./script : seems that logsave work under root only
4- ./script > logfile : the problem with this is that the output of echo or (read "enter your id") command will not be displayed on the screen (actually nothing will be displayed, i have to open the log file to see the output). is there any way to save the log of the "send" ? or to save the log of the complete script without hiding the output on the screen?
I have an issue with sendmail. I need to configure sendmail to send email from command prompt to any domain. This is just for the notification purpose. I installed sendmail and sendmail-cf and sm-client. The following are the configuration I have done.
/etc/mail/sendmail.mc
1) dnl # DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
2) m4 /etc/mail/sendmail.mc > /etc/mail/sendmail.cf
3) /etc/hosts = 127.0.0.1 localhost.localdomain
/etc/hosts = 192.168.2.50 mysystem
4) /etc/hosts.allow = sendmail:ALL
[Code].....
I am from India, and I tried to update my Ubuntu system today. Code: $sudo apt-get update The update failed because the connection to the India mirror timed out: Code: [URL] Could not connect to in.archive.ubuntu.com:80 (111.91.91.37). - connect (110: Connection timed out) I tried the update a few times, with the same result every time.
I had firestarter running at this time, and noticed that I would get new security events every time I tried an update. I checked the events list, and it turned out that the machine at the ip address 111.91.91.37 (the in.archive.ubuntu.com machine, to go by the above error message) had been trying to make connections to seemingly random ports on the machine every time I tried the update: see the attached screenshot. I then changed my repositories to the Main Server using Synaptic, and tried the update again (from the command-line). This time it worked without a hitch, and firestarter did not report any unwanted incoming connection. why is the India mirror trying to open connections that the Main server apparently does not need in order for me to do the update? Should I (we) be concerned?
So I've been looking around and some people say that the IPW2200 driver doesn't need Ieee80211 to work properly. What I'm trying to do is compile my own driver with the Jamx patch for version 1.2.2 but then it says that I do in fact need Ieee80211 to be installed. Even though I don't have it installed, my wireless works great. I just need the patch to work with the driver. I've also tried configuring some of the files in the Ieee80211 folder but it doesn't seem to help at all. When I try to use the make command for Ieee80211 I get this:
Quote:
gooch@gooch-laptop:~/Downloads/ieee80211-1.2.18$ make
Makefile:17:
Makefile:18: WARNING: $SHELL not set to bash.[code]..
As you can see, It looks like it got rid of the proc_net errors but I still can't get it to install properly. Also, if I try to do the make SHELL=/bin/bash, it ends up being the exact same thing. This is really starting to get frustrating. Is there any way I can bypass this or do I need to install Ieee80211? If so, how can I do it without all these errors in Ubuntu 10.04.
Is there any way to do remote desktop from Mac (Snow Leopard) to Centos 5.5?I have turned on remote desktop in Centos and got the address ([url].....) to access remotely. Then I installed vnc-Viewer in my Mac. Put the address like (mypcname.com:0) then clicked connect. I get error message "Failed to connect: Operation timed out (60)".My Mac and Cenotos is in the same network.
View 4 Replies View Relatedfor weeks now I have the following problem: I am not able to connect to my wireless home network for most of the time. I am using Ubuntu 10.04; an Intel Wifi AGN4965 card and as driver "iwlagn". Maybe the solution lies within these messages (from daemon.log):
Sep 20 22:03:35 ubuntu NetworkManager: <info> starting...
Sep 20 22:03:35 ubuntu avahi-daemon[1130]: Found user 'avahi' (UID 104) and group 'avahi' (GID 111).
Sep 20 22:03:35 ubuntu avahi-daemon[1130]: Successfully dropped root privileges.
Sep 20 22:03:35 ubuntu avahi-daemon[1130]: avahi-daemon 0.6.25 starting up.
Sep 20 22:03:35 ubuntu avahi-daemon[1130]: Successfully called chroot().
[Code]....
I am relatively new to Ubuntu. Currently running Lucid Lynx, but I cannot connect to the internet. I can ping 127.0.0.1, and google.com. Software update works as well, but the connection times out when I try connecting to a web site e.g. bbc.uk.
View 4 Replies View RelatedI am not so experienced with networking in Linux. I've successfully installed Red Hat Linux Enterprise 5.2 on a VMware host. When I issued nslookup command, it returns "connection timed out" error as follows:
Code:
[root@rac1 ~]# time nslookup rac1
;; connection timed out; no servers could be reached
real 0m15.038s
user 0m0.000s
sys 0m0.000s
My questions are:
(1) Is that error normal?
(2) Is there a way to decrease the 15.038s value? rac1 is the local hostname, so why it takes all that time to resolve it.
Following info may help:
Code:
[root@rac1 ~]# hostname
rac1.mydomain.com
[root@rac1 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#eth0 - PUBLIC
192.0.2.100 rac1.mydomain.com rac1
[root@rac1 ~]# ping -c 4 rac1
PING rac1.mydomain.com (192.0.2.100) 56(84) bytes of data.
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=1 ttl=64 time=0.015 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=2 ttl=64 time=0.029 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=3 ttl=64 time=0.029 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=4 ttl=64 time=0.029 ms
--- rac1.mydomain.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3000ms
rtt min/avg/max/mdev = 0.015/0.025/0.029/0.007 ms
I did a clean install of the latest version of Ubuntu. For some reason, there are still internet-issues. When I tried out the following command
Code:
telnet
open ftp.microsoft.com 21
I got
Code:
telnet: Unable to connect to remote host: Connection timed out
Also, during install of the new ubuntu, it was unable to reach the repos for downloading. Odd thing is that I can go online, and that when I type 'ftp.microsoft.com' in my browser, it displays the file-hierarchy.
I keep getting emails from my 404 error handling system on my CMS saying "mail3.xps.idv.tw:25 cannot be found" with no referer. It would appear that someone is trying to use my server to relay spam to Taiwan. How do I check that my server has the right security to stop this happening?
View 1 Replies View RelatedWhen doing bit torrent downloads, I eventually lose the wired network connection in about 5-15 minutes. This only happens when Deluge is running. I can surf for hours, our connect up the the work WAN for hours and this does not seem to happen.Until these last two weeks, Deluge has been fast and solid. Here is the error from the log:
Code:
Jul 31 18:20:06 marcs-desktop kernel: [ 1539.020039] ------------[ cut here ]------------
Jul 31 18:20:06 marcs-desktop kernel: [ 1539.020060] WARNING: at /build/buildd/linux-2.6.38/net/sched/sch_generic.c:256 dev_watchdog+0x2a0/0x2b0()
[code]....
Issue with the 'host' command that comes with bind-utils package.We don't have any browsing/name resolution issues except to the following two sites:
[code]....
command [URL] returned:
www.aeroplan.com is an alias for www.halb.aeroplan.com.
www.halb.aeroplan.com has address 207.34.195.17
;; connection timed out; no servers could be reached
;; connection timed out; no servers could be reached
[code].....
I have tried to run the "host" command against different DNS caching servers I have access to all produced the same timed out error. I called Aeroplan technical support to report the issue to them and from their perspective, they have no problem accessing the website.And we don't have any problem accessing any websites ourselves if "host" return A record lookup without the timed out error.
1. It's not our firewall filtering out packet. I tried it on external facing server without firewall and got the same result.
2. It's not our DNS caching server cause same errors are observed on our ISP caching server.
3. It works on an altogether network, from a Windows Vista desktop, through IE 8.
I am sending message from linux to windows system as follows echo "test"|smbclient -M <IP Add>But I am getting "session request failed" message . How can I solve it? <Ip Add> in network and reachable.
View 1 Replies View RelatedI open up 2 xterms on my desktop, A(/dev/pts/0) and B(/dev/pts/1).
I can write from A to B using redirection e.g. echo "test" > /dev/pts/1
How do I run a command from A on B? e.g. "clear"
Ideally I should be able to do this from a script.
Just having updated from SuSE 10.3 to 11.1 I'm struggling with some network issues. WLAN connection setup with Network manager worked, the connection comes up on login to KDE 3 and works for some time. All of a sudden, the wlan connection fails and reconnection via NM is not possible. The normal wired ethernet stays fully operational and connection is established at plug in of the cable. I tried to track the issue down by browsing through /var/log/NetworkManager but I did not find the answer. A rcnetwork restart brings back a fully operational network including wlan connectionvia NM.
Working connection fails, NM fails to reconnect:
Code:
Jan 6 13:04:30 mars NetworkManager: <info> (eth1): supplicant connection state: scanning -> associating
Jan 6 13:04:30 mars NetworkManager: <info> (eth1): supplicant connection state: associating -> associated
Jan 6 13:04:31 mars NetworkManager: <info> (eth1): supplicant connection state: associated -> 4-way handshake
Jan 6 13:04:31 mars NetworkManager: <info> (eth1): supplicant connection state: 4-way handshake -> group handshake .....
I am trying to send e-mail from command line by using "mail" in fedora. It goes to e-mail server in the same network but it is refused by other outside this network with message: "..... Connection refused by name@yahoo.com ......
View 1 Replies View RelatedI am writing an expect script and I want to send the command for the print-screen function. So, what is the command? Alternatively, is there some terminal application which may be well suited to take screen-shots via commands from the terminal or automation scripts?
View 2 Replies View RelatedI have a minecraft server running as a daemon. When you run it normally (not as a daemon), you can type commands into the console. How can you get to the console so I can send it commands while it's running as a daemon?
View 1 Replies View Related
