Fedora Networking :: IPW2200 - Failed To Send System Config
Jun 8, 2009
I'm using Fedora 9 and I recently transferred my hard drive to a new laptop. Everything went smoothly except the wireless, which promptly broke. I played around with the network service and the NetworkManager service and chkconfig stuff and system-config-network, until I finally got it to work. Now I have wireless, but every time I shut down, I get some error-like messages:
"ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command." repeating every second for about 3 or 4 seconds before it finally does shut down.
These also appear in dmesg, usually about 20 in a row, thus my concern. My wireless device's interface is eth3. How to get rid of this message while still keeping wireless connectivity.
View 1 Replies
ADVERTISEMENT
Jan 23, 2010
I cannot connect my Sony Viao laptop to wireless. It just will not seem to connect. I am a bit of a n00b i am afraid so go easy on me
I have been through /sys/bus/pci/drivers/ipw2200 does exist. The Wireless has connected before but it has just seemed to have stopped. I have tried a few suggestions made in the forums and edited my interfaces config.
[code]...
View 9 Replies
View Related
Mar 28, 2009
I want to reinstall "system-config-network" in Fedora10. I have now system-config-network 1.5.95 and I want to have system-config-network 1.4.3 (it is from fedora8)
View 3 Replies
View Related
May 28, 2009
I've been running F10 since it first came out, and I was happy to see it was the first Fedora release that automatically recognized my Atheros wireless card. I have to run system-config-network and press the "activate" button when I start the machine, but that's ok and no big deal. But today, for whatever reason,in system-config-network, the "activate" and "deactivate" buttons are grayed out and I cannot start the device so I have no network access. When I boot the machine into Windows, it works fine.
View 2 Replies
View Related
Jul 14, 2010
I was trying to set my wireless to start up when the computer is booted like the regular ethernet eth0 but I can't figure out how to set the WPA pass phrase with system-config-network
View 2 Replies
View Related
Sep 1, 2010
This may fall under the "ain't broke don't fix it" category but it's driving me nuts. I've got the Broadcom 4322 wireless adapter in my laptop and it works fine with broadcom-wl driver and kmod. However there is no ifcfg-eth1 file and the card does not show up in system-config-network.
View 2 Replies
View Related
Jun 2, 2009
I recently built my second general-purpose server, and recently installed fedora core 10 on it. The first thing I attempted to set up after installation was the network - and that's where it's gone wrong When editing a network device using the graphical system-config-network utility, I find that the subnet mask is being automatically changed to match the default gateway address every time I attempt to modify any of its settings (or sometimes even when I cancel the changes). This also means that I cannot set the subnet mask, as it simply won't accept my setting for it. I seem to be able to get around this glitch by setting the subnet mask using the shell version of the same utility, but that doesn't solve my network issue.
Even when I use the shell utility to fix the subnet mask, I'm unable to ping other computers or routers on the network even when ifconfig indicates that the desired ip address has been taken, and other computers on the network are also unable to see the server. I'm using a wired connection and a static IP address on a network with no DHCP.
View 14 Replies
View Related
Feb 17, 2010
I recently switched to Linux ubuntu 9.10 the olny problem i have now is my wireless. i have IBM THINKPAD t43 looked online, the best thing is to install ipw2200. Which needs ieee80211 I downloaded ieee80211-1.2.18 but when i run "make" it gives me this:
Code:
Checking in /lib/modules/2.6.31-19-generic for ieee80211 components...
make -C /lib/modules/2.6.31-19-generic/build M=/home/mohammad/Desktop/ieee80211-1.2.18 modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-19-generic'
CC [M] /home/mohammad/Desktop/ieee80211-1.2.18/ieee80211_module.o
[code]....
I'm a root when i run the command from my understanding the problem is that there is a compiling error in ieee80211_module.c but i might be wrong!
View 9 Replies
View Related
Mar 3, 2010
I have been trying for months to get my wireless working on my acer laptop and I am now beyond despair. I using an Acer Extensa 67000 and here is what is at issue:
ubuntu@ubuntu:~$ lspci -nn | grep 'Wireless'
06:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
ubuntu@ubuntu:~$ lspci -vn On this one I posted just what I thought would be relevant:
[Code].....
View 3 Replies
View Related
Nov 13, 2010
I just removed Windows XP from my Dell Latitude D510 and installed Kubuntu 10.04 LTS lucid lynx. Obviously upgraded with apt.It seems to try to connect to the local AP (no encryption), but the connection fails.
View 8 Replies
View Related
Apr 29, 2011
how to patch it. but the problem is, I can't find a working download link.
View 1 Replies
View Related
Dec 26, 2009
I have a problem with a bad entry in my system-config-printer on my notebook computer which I think is interfering with my ability to print. I run fedora 10 on several systems in my house. On one desktop, I have a printer hosted which I think I have successfully setup for wireless network sharing (an HP895) using IPP.My problem seems to be a bad entry in my system-config-printer on my notebook computer which seems to stall when I try to print from applications (Firefox for example.) on the notebook. If I open up "Printing", I have 3 printers listed... one of them is for when the printer is attached directly to the notebook, one of them is the working printer description "printer" and the 3d is the bad entry. If I click on the bad entry to try to delete it, I don't have that option, but If I try to look at the "properties" for that entry, system-config-printer stalls (as do other applications when the printing dialog box starts up, and I have to force them to shut down.)
I will attach some screenshots and a copy of my /etc/cups/printers.conf file.How do I get rid of this "bad entry" in the system-config-printers GUI ? It doesn't seem to exist in the printers.conf file.
View 3 Replies
View Related
Mar 16, 2010
i tried using the scp command but it doesnt work.
View 8 Replies
View Related
Jun 8, 2011
went through the tutorial on FedoraSolved for securing ssh. I installed denyhosts with yum and then tried to run it with the command line command"sudo /etc/init.d/denyhosts start" but I got the message"Job Failed. See system logs and 'systemctl status' for details [FAILED]"and in the application "services" in the applications menu,t shows an exclamation warning and says that "This unit has failed"
View 1 Replies
View Related
Jan 24, 2010
my ipw2200 w-lan driver's been disconnecting frequently and I've done some research on it, while seeing that it's been a frequent problem, in the past.
View 9 Replies
View Related
Sep 6, 2010
I trying to set up a LDAP server using openLDAP / db4. The server runs fine but I cannot get the client to work. Client and server are on the same machine, as for now. The problem seems to be in PAM. However I cannot start the system-config-authentication tool which should do the trick.
Environment
=========
CentOS release 5.4 (Final)
Software
======
authconfig-gtk-5.3.21-6.el5
system-config-securitylevel-tui-1.6.29.1-2.1.el5
system-config-network-tui-1.3.99.18-1.el5
[Code]....
View 3 Replies
View Related
Mar 8, 2010
My machine is a new Fedora Core 12 install. The install did not make an /etc/x11/xorg.conf file by default, which is odd. So, I want to change things with the display. But there's no "system-config-display" in /usr/bin. What's going on? Why wasn't this installed by default? I've had lots of other problems with X on this machine as well:
the 10x20 fonts were missing XFree86-Misc error messages whenever I start an xterm I also receive these warnings, intermittantly, when I create xterms:
Code:
Xlib: extension "XFree86-Misc" missing on display ":0.0".
xmodmap: please release the following keys within 2 seconds:
Control_L (keysym 0xffe3, keycode 37)
xmodmap: please release the following keys within 4 seconds:
Control_L (keysym 0xffe3, keycode 37)
xmodmap: please release the following keys within 8 seconds:
Control_L (keysym 0xffe3, keycode 37)
With this many problems I want to know if there's something in general broken with X on FC12, or was that just my install, or what?
View 6 Replies
View Related
Jun 7, 2010
Can i use system-config-lvm to resize lv_root from 50GB to 20GB and then resize lv_home to use the new 30GB of space without any hiccups? Meaning I can do this without losing data etc?
View 1 Replies
View Related
Dec 29, 2008
FC10/KDE system-config-display won't run and no error messages in /var/log/messages
# system-config-display
Traceback (most recent call last):
File "/usr/share/system-config-display/xconf.py", line 312, in <module>
[code]...
View 8 Replies
View Related
Aug 27, 2010
I need to receive a number of raw ethernet packets (say, 100 packets) into a user-mode accessible buffer large enough to hold all the packets. The way I have done this so far is by looping over the recvfrom() system call 100 times, passing an incremented pointer addressing the location in my buffer to store the packet. Is there a way to receive the 100 packets into my buffer with one system call, perhaps by instructing the kernel to DMA the 100 packets into my buffer?
View 1 Replies
View Related
Jun 29, 2009
I just updated from Fedora 8 to 10 to 11 today. When I run system-config-display I get the following message:
Traceback (most recent call last):
File "/usr/share/system-config-display/xconf.py", line 33, in <module>
import rhpxl.monitor
ImportError: No module named rhpxl.monitor
If I comment out that line, the next one fails, and so on. I installed a newer package, 1.1.3-2.fc11, because I thought maybe the installer didn't put it on and that behaves the same. Why this won't run? I would desperately like to use my widescreen monitor and I'm hoping that 11 will finally support my intel graphics correctly.
View 14 Replies
View Related
Jun 10, 2010
I'm curious as to why system-config-services is not installed by default in Fedora 13. IMO it's a pretty important tool for managing a system. I checked the release notes but could not find any mention of its removal.
View 2 Replies
View Related
Jun 17, 2010
When I click on System Administration Display I get the root pasword entry. I enter the root password and then nothing. I stumbled on another way to set the resolution before but I can't find it now
View 5 Replies
View Related
Nov 5, 2010
I looked around, but found no results that really matched and I would like to point out that I am fairly new to linux, so this may be a very obvious answer to some of you.I am running fc12.i686, installed from a disk in the back of a book for a class. No one else in my class is having this issue.When I select System > Administration > Network I am given this error: Failed to execute child process "/usr/bin/system-config-network" (No such file or directory). I am not so new to not realize that this file is not there, which I confirmed with an "ls -a". My question is, is there any way that I can download and install that bin? Or perhaps replace/repair it with the disc? It was supposed to be in the original install and my have been, the only thing that I have done in the /usr/bin/ directory is I tried to install Java (6.22 I think it was), which told me it installed correctly but didn't work when I tried Minecraft.
View 3 Replies
View Related
Jan 7, 2011
After an upgrade (preupgrade) from Fedora 12 to 14, system-config-boot opens from the menu and displays the right information but does not change grub.conf. I have searched the forums and found nothing like this. It worked before the upgrade. I have forced a new install of system-config-boot. I can change grub.conf manually. There are no SElinux messages that I can find. It would be nice to get the gui working.
View 4 Replies
View Related
Aug 11, 2011
I'm trying to setup notification function for the Nagios Core which use Mail to send notification.I got an account from Rogers. I have SMTP server, email account with authentication information.My Nagios server is in a workgroup, there is now domain assigned to it, I just use nagiosserver.localdomain in /etc/hosts.I added Rogers SMTP server in /etc/mail/sendmail.mc and Future (AuthInfo) I created an /etc/mail/AuthInfo and add AuthoInfo:smtpserver "U:user" " P: pwd" "M:Plain"I added smtp server in /etc/mail/access for RelayI added root@nagiosserver.localdomain on /etc/mail/virtusertableI regenerated sendmail.cf by user m4 commandrestart sendmail service.When I ran: Mial -s test nagios4ccs@rogers.comIt did not prompt any error message , in the maillog it says the message is queued but It can not be sent out
View 3 Replies
View Related
Nov 17, 2010
When booting the system ,"starting system logger : Failed" after that i login to the system as usual but the system logger cannot start,even i use the service syslog restart command,how can i solve such problem ,thanks a lot
View 1 Replies
View Related
Mar 2, 2010
When I installed F11 it didn't have the i810 driver so it defaulted to VESA. I upgraded to F12 using preupgrade and thought it would re-detect the graphical hardware and didn't. I want to recreate xorg.conf for my computer (Toshiba Satellite A45-S25) so I can use Compiz and some 3D application but I can't find system-config-display. It's missing from the system and I don't know what package it belongs to so I can't re-install it.
View 2 Replies
View Related
May 22, 2010
the icon in system menu for system-config-selinux get lost with last updates.
View 8 Replies
View Related
Jan 5, 2011
Been running Fedora for a while now, iterating up through versions to 12. Decided to to a clean install upgrade to 14. Apparently, bug mistake. Everything seems to be progressing fine, but after 'transferring install image to harddrive', the 'Starting Install Process' fails withsystem-config-lvm-1.1.15-1.fc14.narach.rpm cannot be opened.I have no idea what to do with this. I've reburned the install disk a couple of times (and checked the HASH) -- no apparent problems with the install media.Tech details: x86_64 install on a multi-pro box with a 3ware raid 5 controller (5 disk). I've never run LVMs. Two simple hard partitions (/ and /home). Fedora 12 installed with no problems (as did every other version of Fedora <=12).---------- Post added at 12:29 PM ---------- Previous post was at 11:54 AM ----------Some additional information:1 tried Fedora 13 -- wouldn't even recognize my disks. Installer hung at trying to find basic storage. Not a good sign2 tried my old Fedora 12 install DVD -- again, worked like a charm. Expect that F12 repos are now closed.
So, it seems as if some 'change' between F12 and F13/14 has made some part of the install process choke on my 'hardware' (I'm guessing something related to 3ware RAID card). ---------- Post added at 01:51 PM ---------- Previous post was at 12:29 PM ----------I just tried CentOS 5.5 (x86_64). Also installed fine. For some reason, Fedora >= 13 absolutely won't let me get past the problem noted in the OP. I suppose I could go with CentOS (for long EOL support), but I need some of the newer compiler/dev libs in Fedora 14 for some projects I'm working on.
View 5 Replies
View Related
