Ubuntu Networking :: Asus EEE 1001P - Unable To Use Wireless And Mobile Broadband
Feb 2, 2010
I just got a new Asus Eee 1001P, and the wireless isn't working at all. I had an Asus EEE 1005HA before that and since both use the AR8132 network card I hoped it would be the same problem as with that, where installing the backports fixed the problem. However, that doesn't do anything. With the 1005HA the connection was only flaky and disconnected a lot, but the 1001P doesn't find any networks to connect to at all. Also, the mobile wireless will connect only once and after disconnecting every attempt to reconnect ends in that connection symbol spinning wildly until I tell the network manager to disconnect. On Kubuntu it doesn't even connect once.I never had that problem with the 1005.
Im a newb to ubuntu just wiped my brand new asus 1001p netbook of windwos 7 and put ubuntu netbook remix on it 9.10....Everything works great except the wireless...I know theres probally a billion topics on this, but i just need step by step easdy to follow guide on how to do this...I asked the IT at my work and he claims it cant be done, unless i switch out the internal wireless to a card that "just works", which im not comfortable with or use a usb wireless stick, which defeats the purpose of a netbook being so small....Im sure this can be done so please help me show up a IT that doesnt know linux .BTW the wireless card is a atheros thats all i know..
Just got a secondhand Asus EeePC 100P netbook, fresh install of Ubuntu 10.10, and while I can connect to my wireless network and access the router through the browser, I can't connect to the internet. Pinging any other sites, either by domain name or IP, doesn't work. I've tried various things suggested in similar threads (putting in the DNS server info manually, disabling ipv6, restarting about a gazillion times), but nothing's worked so far. (My other computer, a Mac, can connect just fine.)
Attempted to install ndiswrapper, failed miserably, and I'm not sure if that's just for situations where the wifi itself doesn't work?
I'd be very grateful for any suggestions.
Here's what's under Connection Information at the moment:Interface: 802.11 WiFi (wlan0)
I had previously been sharing my ethernet connection over wireless using Hostapd & dnsmasq on my headless server as this tutorial shows: here which had been working fine. I now wish to share my USB mobile broadband over the wireless. I using a ZTE MF112. I was able to get the connection working using the application wvdial. - Firstly I had to create a hard link between /dev/gsmodem & /dev/modem - wvdial then made a new connection ppp0 which would work for internet access.
Changing the interfaces to have the br0 port like so: Code: iface br0 inet static address 192.168.1.1 network 192.168.1.0 netmask 255.255.255.0 broadcast 192.168.1.255 bridge-ports eth1 ppp0 wlan0 Flushing the IPTables & then adding:
Code: iptables -A FORWARD -i br0 -s 192.168.1.0/255.255.255.0 -j ACCEPT iptables -A FORWARD -i ppp0 -d 192.168.1.0/255.255.255.0 -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
Doing so works fine, but I'm not entirely sure how to make this all automated. I could try making a script to launch, but I don't have a huge amount of experience writing scripts. Is wvdial the best application to use? Keeping in mind I'm using a headless server. I use Squeezebox server & the scrobbling didn't seem to be able to connect to last.fm. Do I need to specify which connection Squeezebox uses?
I have a Acer Aspire running dual boot Ubuntu 9.10 and Vista. Although it has an Atheros wireless card (AR5001 according to linux, AR5007 according to Vista) until recently I didn't have any apparent problems with it.I installed a ZTE MF112 Mobile Broadband Dongle. Now I am experiencing great difficulty in communicating with my wireless router (with both LAN and WAN traffic). Connecting to the network in the first place appears to happen quite smoothly and my computer obtains a DHCP IP address. However the ping response times are measurable in seconds rather than the milliseconds I would expect, and any traffic across the network crawls, or just times out and fails.
I do not believe it is the router at fault as two laptops, both also with Ubuntu, can connect to it fine and swapping it out for another router does not fix the problem either. Also there is no problem connecting from Vista.I suspect that installing the dongle has altered something which has made the bugs in the wireless card/drivers apparent and that's where I need some help.
How do I installed a sprint novatel 3g modem? I see sprint under the mobile broadband tab when I create a new connection, and it shows all the right information, but I never can connect.
I have internet access using mobile broadband and i also have a wireless network for home usage without internet access.
When my wireless network is connected every application in ubuntu (Meerkat) tries to use it for inernet access (as neededobviously). As soon as i disconnect from the wireless network (and assuming the mobile broadband is on) everything has access to the internet again using the mobile brodband.
How do i tell ubuntu that i don't want it to use my wireless network for internet access?
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
I just want to tell everyone how good the Garmin/Asus A10 mobile phone is as an internet modem.I am in Australia and Mobile internet is an expensive thing to have. cheapest is dodo but i had a few problems trying out a friends usb modem.Anyway i was in the market for a Gps phone and discover this one. it is Android phone and pretty cheap so far it is very good gps, camera, mp3, and phone is excellent.BUT here is the clincher. when you plug it into the computer, the phone screen lights up and gives you 3 options.
I have an Asus 1001p (pineview) netbook. I was previously using the Unity interface in 10.10 but, as of the update to 11.04, Unity never loads. I can log into the classic desktop just fine, so X/GDM are working fine. I assume that since I was running Unity before that the pineview graphics are capable of running Unity in 11.04.The very first boot after the upgrade, there was significant disk activity and then it sat there with a black X screen and a working mouse cursor. I let it sit there for about 20 minutes and then I rebooted. On the second boot, I experienced the same thing, except my background was GDM's background.
Ctrl+Alt+F1,2,3,4 wouldn't switch between VCs, but that's not something I ever really do on a netbook so I can't say if it was working before. Are there any logs or anything else I can look at to debug this issue? I didn't monkey around with compiz or anything like that. In fact, it was pretty much a straight-up 10.10 image before I upgraded.
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
I need help with connecting to cdma mobile broadband for a tethered samsung phone. When I first installed Suse the phone icon on the network manager icon was all i needed to do to connect to the cdma network.After rebooting later the icon is gone and i cannot manage to connect. The connection is still there, but it is as if the computer no longer recognizes my phone as a modem. Well sense i just installed i figured lets try reinstalling to see if it was a bad installation. It happened exactly the same again. If anyone has any idea how to get network manager to allow me to connect to the internet again i would be grateful.
Running Ubuntu 10.04 Unable to get Ubuntu to find the ASUS USB Wireless to connect for network. I got the Broadcom to work using ndiswrapper but the range on it is unbearable meaning I have to be in the same room as the router. Hoping this has a much better range.
I am using Fedora 13. and had bought MTS Mblaze Mobile Broadband device. One installer comes with this device for Fedora, I have installed it.There were some issues while starting this application on fedora. But after seeing some threads for SELinux, it had been solved.Now, when I run this software, a window appears. If i clicked connect, it does show connecting and once connected automatically firefox opens.
But i am not able to access internet. After some time software shows device is in sleep mode due to inactivity. Network connectivity icon on launch panel on fedora shows network is connected.I had similar problem with Mandriva 10..
I'm using a 'ice.net' D-50 (CDMA EV-DO rev A) mobile broadband USB modem, also sold as Cmotech CNU-680 in other areas. The modem is connected to a USB port on a hp8710w mobile workstation.
As the 11.2 Gnome Network Manager won't connect this modem to Internet (see my first post here), I have downloaded and installed a 'D50 Modem Manager program' from [url]
After unpacking and installing this cmotech-qtmodem-1.6-1.i586.rpm package for suse on 11.2 x86_64, the gui application 'D-50 Modem Manager' is found in the Internet Group.
However, neither this program does connect the D-50 modem really on 11.2 x86_64 (as it did on 11.1 x86_64). Tried both traditional network setup and with Network Manager.
Any idea and suggestion how to trobleshoot this further? I think I've seen that a newer version cmotech-qtmodem 1.9 has been mentioned on the web, but without being able to find and download this version.
Command output as follows:
As normal user:
On the Modem Manager gui: D-50 modem is ready
From Login script Debug window:
As root:
It seemed like the modem connected, but Firefox was not able to connect afterwards (Server not found)
I am trying to use the HUAWEI E1756C USB stick to connect to the internet. Installing usb_modeswitch and usb_modeswitch-data allowed networkmanager to "recognize" the stick and set up a mobile broadband connection.
The result is that NM succeeded in connecting (one of every five attempts) but firefox does not surf, nor emails can be downloaded etc. Just like if not being connected. The USB modem shows the steady blue LED as connected.
A NM issue? I have tried disabling NM control and tried with PPP clients like NMTSMON, wvdial and even Sakis3g. All with the same results. They seem to connect and show flux up and downloaded but no surfing.
resolf.conf shows is pretty much empty and no DNS there.
The working settings in Window$ are:
Same settings with Sakis3G, or NMTSMON or NM result in connection with no action from applications that use the internet.
I have had a similar issue with WLAN each time I change to a different network. I solve that by forcing to update the DHCP. I mean using -su dhcpd wlan0
But attempts like dhcpcd ttyUSB0 or dhcpcd ttyS0 get the same result. So no idea if this is an DHCP, or DNS or another issue.
My box is an ASUS EEEPC 2005H netbook with OpenSuSE 11.2 and KDE
I am using open suse 11.3 with kernel 2.6.34 KDE is 4.4.4, I have Lenovo G550 laptop My system sometimes detects and connects the modem to internet and sometimes its doesn't detects and I am unable to connect to internet I have all the updates installed. Because of this I have to use Forbidden OS (windows)
1. Installed a fresh 10.10 and upgraded all packages (via Ethernet). 2. Downloaded latest drivers from ASUS webiste (DPO_RT3070_LinuxSTA_V2.3.0.2_20100422) 3. Unpacked and tried to compile:
The wireless card is working with the driver rt2870sta, but I've read not all the capabilities of the device is unleash unless the native driver is used.
On my Lenovo T410 (openSUSE 11.4 KDE - 64bit) I have mobile broadband. Gobi-loader is installed and working properly. However when I try to setup mobile broadband connection the KDE Control Module crashes. Tried many times also after reboots, though KDE Control Module keeps crashing.
i have both a vodafone and 3 mobile broadband dongles. they both work out of the box, however i am only getting gprs, while i can get 3g/hsdpa using my windows box. is there any gui configuration manager or terminal commands i can use to set it to 3g/hsdpa only? im running ubuntu 9.10.
Just loaded Ubuntu 9.10 on a Dell 5100, (XP finally got the bsod) I have verizon mobile broadband, all was very good until I realized I cannot connect wirelessly. The usb modem was not recognized, there is no indication of any wireless connection. There is no icon and nothing happens when the usb modem is plugged in. I have been working on this for hrs & hrs. I am a complete novice on Linux, but CompT1 A certified on PC's
I have an USB (Huawei 1751) modem for mobile broadband. I had it up and running in Ubuntu 9.10 but I had to clear the computer for various reasons. I have decided to only use LTS versions so for the reinstall I have used Ubuntu 8.04 LTS. I have downloaded and installed usb_modeswitch and can see that the modes is changed to the right value. After that I wanted to add a new mobile broadband connection in the network connections wizzard - but cannot see any settings for mobile broadband. I am sure it must be possible - but where is this function hidden in version 8.04 ?
I have just switched to Ubuntu from Win 7 RC. So far its been fun, learning to use terminal and all. But I have got a problem now I cannot find a solution to.
I am using 3 Mobile Broadband. The thing just worked - I plugged it in, created a new connection, modified config a little and was happily browsing.
However, it started acting out yesterday. When I boot the system with the modem plugged in, the USB stick is recignised and NetworkManager starts connecting (I have auto connect on). It then shows the "connected" message, and generally appears working fine.
On the other hand, I cannot open a single page in Firefox, it shows the default server not found page.
I used the approach Windows taught me: close, open, retry. I unmount the 3 Mobile Broadband drive, pull the modem out and reconnect it. NetworkManager then does it's job and this time everything works.
I nether had this problem in Win7 or Vista. It looks to me something goes wrong during the booting when the modem is plugged in.
I have bought reliance netconnect broadband+ 3.1 Mbps connection. I am provided Huawai EC1260 device to make the connection.But using ubuntu 9.1 I am not able to make the connection work. I have tested the device in windows XP and it's working fine there. I don't want to use windows and desperate to establish the connection in Ubuntu 9.1.
I decided to give 10.04 a shot, and upon first boot, I was able to setup and use my Rogers Rocket mobile broadband stick. When I rebooted, I found that it was in the network settings, but I was unable to connect, nor did it show up as an option in the drop-menu. I played with the terminal trying to see if anything was wrong, but everything seems normal, which is to say I don't even know what I'm looking for in regards to this type of connection.
I obviously know now that it works, I just don't know what made it stopped for the time being. I'm thinking of doing a fresh install over the current partition, and trying to work the issue from there.
I recently made a clean install of Ubuntu 10.04 and my mobile broadband no longer works. When I plug it in, the set-up wizard does not appear, and even when I run the wizard manually, the modem is not recognised. I know the modem works as when the laptop ran 9.10 it all worked perfectly.
For the record, it is a Huawei E1550 and has 3 Mobile Broadband Pay-as-you-go.
Code: sudo ifconfig eth0 mtu 1492 ifconfig | grep MTU
And then try surfing...
I also have this problem but my internet connection is Mobile Broadband (through a wireless modem HSDPA), not eth0. In this case how can I change the MTU value?
In a separate thread I discuss my issues with getting my Blackberry 9650 tethering with Verizon and Ubuntu 10.10 with bluetooth. I'm still hoping to get that working, but in the mean time, I've actually started to think about perhaps getting a mobile broadband card from a US provider separate from my blackberry anyway - preferably one that works right out of box with Ubuntu.
Does anyone here have any recommendations? I know there's a lot of compatible devices, but maybe someone here can recommend a provider (I don't have to stick with Verizon - willing to go AT&T, T-Mobile, Sprint, etc.) and a USB mobile broadband device that'll work pretty smoothly?
