Ubuntu Networking :: Erroneous Routing When Both Mobile Broadband And Wireless Network Connected
Mar 30, 2011
I have internet access using mobile broadband and i also have a wireless network for home usage without internet access.
When my wireless network is connected every application in ubuntu (Meerkat) tries to use it for inernet access (as neededobviously). As soon as i disconnect from the wireless network (and assuming the mobile broadband is on) everything has access to the internet again using the mobile brodband.
How do i tell ubuntu that i don't want it to use my wireless network for internet access?
View 6 Replies
ADVERTISEMENT
May 16, 2011
is there any tool (terminal command preferably) which can show the frequency and the type of the connected mobile broadband network. I mean HSDPA/GPRS etc and 900/2100MHz. At my country there are 2 frequencies used for UMTS, 900MHz for rural areas and 2100MHz for urban and I need to know what type is the connection and what is the used atm frequency. I am using wvdial for connecting to the internet.
View 2 Replies
View Related
Jun 28, 2011
I have a Acer Aspire running dual boot Ubuntu 9.10 and Vista. Although it has an Atheros wireless card (AR5001 according to linux, AR5007 according to Vista) until recently I didn't have any apparent problems with it.I installed a ZTE MF112 Mobile Broadband Dongle. Now I am experiencing great difficulty in communicating with my wireless router (with both LAN and WAN traffic). Connecting to the network in the first place appears to happen quite smoothly and my computer obtains a DHCP IP address. However the ping response times are measurable in seconds rather than the milliseconds I would expect, and any traffic across the network crawls, or just times out and fails.
I do not believe it is the router at fault as two laptops, both also with Ubuntu, can connect to it fine and swapping it out for another router does not fix the problem either. Also there is no problem connecting from Vista.I suspect that installing the dongle has altered something which has made the bugs in the wireless card/drivers apparent and that's where I need some help.
View 2 Replies
View Related
Dec 30, 2009
I manage to get my mobile broadband working (connected, I mean) in both root & user account. However, my web browser, IM etc only work in root account.In user, knetworkmanager does show that my Huawei E160G is working fine, connected but I still can't surf the net & chat. I've included the dialout & uucp group for user account but that still doesn't resolve the problem
View 9 Replies
View Related
Jan 18, 2011
I had previously been sharing my ethernet connection over wireless using Hostapd & dnsmasq on my headless server as this tutorial shows: here which had been working fine. I now wish to share my USB mobile broadband over the wireless. I using a ZTE MF112. I was able to get the connection working using the application wvdial.
- Firstly I had to create a hard link between /dev/gsmodem & /dev/modem
- wvdial then made a new connection ppp0 which would work for internet access.
Changing the interfaces to have the br0 port like so:
Code:
iface br0 inet static
address 192.168.1.1
network 192.168.1.0
netmask 255.255.255.0
broadcast 192.168.1.255
bridge-ports eth1 ppp0 wlan0
Flushing the IPTables & then adding:
Code:
iptables -A FORWARD -i br0 -s 192.168.1.0/255.255.255.0 -j ACCEPT
iptables -A FORWARD -i ppp0 -d 192.168.1.0/255.255.255.0 -j ACCEPT
iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
Doing so works fine, but I'm not entirely sure how to make this all automated. I could try making a script to launch, but I don't have a huge amount of experience writing scripts. Is wvdial the best application to use? Keeping in mind I'm using a headless server. I use Squeezebox server & the scrobbling didn't seem to be able to connect to last.fm. Do I need to specify which connection Squeezebox uses?
View 2 Replies
View Related
Jun 4, 2011
I have u usb 3G stick and I configured a mobile broadband connection to connect to the internet.I filled all details and saved the connection.Now I clicked on the network manager icon in top right corner, but there was no connection with the name I just created.Again I checked in edit connections dialog box and found the connection there.Now how do I connect to this newly created connection while there is no option in network manager?
View 9 Replies
View Related
Feb 2, 2010
I just got a new Asus Eee 1001P, and the wireless isn't working at all. I had an Asus EEE 1005HA before that and since both use the AR8132 network card I hoped it would be the same problem as with that, where installing the backports fixed the problem. However, that doesn't do anything. With the 1005HA the connection was only flaky and disconnected a lot, but the 1001P doesn't find any networks to connect to at all. Also, the mobile wireless will connect only once and after disconnecting every attempt to reconnect ends in that connection symbol spinning wildly until I tell the network manager to disconnect. On Kubuntu it doesn't even connect once.I never had that problem with the 1005.
Code:
$ lspci
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
02:00.0 Network controller: Atheros Communications Inc. Device 002c (rev 01)
[code]....
View 9 Replies
View Related
Nov 3, 2010
I am having problems with my 3 dongle- when I connect it to my netbook it flashes green so it detects a 3G network. However there is nothing in network manager enabling me to choose the mobile broadband so I can't use it. I know there should be an entry "mobile broadband" after the wireless networks listed.
I know the dongle works because I have previously used it successfully- I was using Linux Mint 8 and have now updated to version 9 and when I have tried to use it have been unable to do so.
I have gone into the connections and my 3 connection is present but there is no way for me to select it in network manager.
View 9 Replies
View Related
May 7, 2010
How do I installed a sprint novatel 3g modem? I see sprint under the mobile broadband tab when I create a new connection, and it shows all the right information, but I never can connect.
View 1 Replies
View Related
Apr 13, 2010
Ubuntu 9.10 working great. Installed Orange 515m as per fix shared on this and other forums; however while it works great at home, it will only 'connect' once at work - on subsequent attempts it connects, but browser etc behave as though they cannot find the modem and I cannot make further connections via gmail and Firefox. I had just made the swap from Win 7 to Ubuntu 9.10 for work as well as home, but I cannot be in the position of being unable to access my emails and so swapped my hard drive back to Win 7 drive today
View 1 Replies
View Related
Apr 18, 2010
I have a broadband mobile modem iCon 225 (Option) with SiMobil provider (Slovenia). I run ubuntu 9.10 (Karmic Koala). I connect to the internet without problem. After a few minutes, the modem lights start signaling that there is no connection, but the network manager shows connected status. I have to reconnect the network manager to regain connection. After about a dozen times of reconnecting like this, I have to reboot the system, as it won't connect, even if I unplug and replug the modem.
I've noticed these frequent disconnects have started a few days ago. I did experience disconnects in the past, but as nearly often as this. I can't attribute disconnects to activity/inactivity, as they seem to happen no matter what I do.
View 5 Replies
View Related
Jul 13, 2010
I am trying to use my tmobile 8320 blackberry as a modem I hook it up through the USB and the phone is recognized I go into network manager to enter the settings for my Apn and Number to dial to and when I try to enter the Network to connect to the apply button goes away and it won't let me go past that point is this something screwed up in Ubuntu
View 1 Replies
View Related
Feb 4, 2011
I have a k3806-z vodafone mobile broadband modem, on ubuntu 10.04. I have added the mobile broadband connection with the network manager wizard. But network manager does not list my connection. I installed usb-modeswitch and usb-modeswitch-data. Still nothing. The disc utility tells me it recognises the modem as a cd drive and a storage device. Evidently usb-modeswitch is not working.
View 11 Replies
View Related
Oct 17, 2010
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies
View Related
Jun 21, 2010
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies
View Related
Mar 5, 2010
How do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies
View Related
Jul 20, 2011
I want to use my laptop to share network for VoIP adapter. I'm using mobile stick as well as wi-fi and Network manager under Gnome 3. Voip adapter asks for address via DHCP to gain the access to the server some where in the other side of the world.
View 6 Replies
View Related
Aug 4, 2010
I need help with connecting to cdma mobile broadband for a tethered samsung phone. When I first installed Suse the phone icon on the network manager icon was all i needed to do to connect to the cdma network.After rebooting later the icon is gone and i cannot manage to connect. The connection is still there, but it is as if the computer no longer recognizes my phone as a modem. Well sense i just installed i figured lets try reinstalling to see if it was a bad installation. It happened exactly the same again. If anyone has any idea how to get network manager to allow me to connect to the internet again i would be grateful.
specs:
toshiba satilleite l305
Suse 11.3
Samsung R560 (Samsung Cdma Technologies)
View 6 Replies
View Related
Jan 9, 2011
I connect to the internet with a mobile broadband dongle. I would like to change the dns settings as page loading seems to be running slow. However, there is no ip tab associated with mobile broadband in the knetwork manager module. There is however for my vpn connection. I have found reference to the ip tab in other postings but alas I am stumped. Is it possible that the mobile broadband connection does not load that tab whereas users on wireless or ethernet have it? That is the only solution I can think of.
View 2 Replies
View Related
Mar 17, 2011
Problems with setting up mobile broadband in KDE4? Than use this instruction: openSUSE starter: Step 2. Need mobile broadband? Use the GNOME applet to make the GNOME nm-applet work under KDE. With this nm-applet I have set up mobile broadband within couple of seconds.
View 1 Replies
View Related
May 22, 2011
I have a Huawei E173u-2 mobile broadband usb stick. It is recognised as a gsm-modem and shows up as such in the networkManager-plasmoid. I have set up the connection details for my ISP (O2), but I can't connect. When I click on the connection, "signal strength" is shown as well as "operator" (o2 - de). The "connection state" changes to "Preparing to connect", then "Setting network address". Then the modem vanishes and comes up again a few seconds later.
Here is the log (/var/log/messages):
Code:
It seems like there is a connection for about 5 seconds, then the modem hangs up and restarts .
The stick works fine with our windows netbook, so I don't think it is a hardware failure.
How do I get this working?
My system:
opensuse 11.4
kernel 2.6.39-30-desktop (2.6.38 gives the same error)
kde 4.6.3
plasmoid-networkmanagement 0.9.svn1192577-168.6
View 2 Replies
View Related
Jun 17, 2011
I am trying to find out how to get the mobile broadband providers to appear on the network manager app, coz at the moment when i try to create a new mobile broadband connection the list of providers is empty.
View 3 Replies
View Related
Sep 10, 2010
I have this usb stick:
The problem is that I have no clue what information I am supposed to give when configuring it through KNetwork manager. The password is disabled and I think the username should be telenor which is my ISP, the other info lines in KNetwork manager, however, I am very uncertain of, and I can't seem to get it working. I have switched from traditional setup with ifup to user controlled through Network Manager and the modem is detected. The module option seems to be loaded and the 'mode' of the stick seems also to be correct, it is not detected as a storage device at least.
View 6 Replies
View Related
Sep 11, 2010
I've just installed openSuse 11.3. How can i connect to the internet. The Mobile Broadband tab on YaST is not clickable. On Linux Mint that tab is available.
View 2 Replies
View Related
May 25, 2011
i am using mobile broadband to connect with network after i connecting mb.it drops it's connection for every 10 minutes.i need to restart to reconnect it.it is happening in kde.
View 5 Replies
View Related
Apr 10, 2010
I'm using a 'ice.net' D-50 (CDMA EV-DO rev A) mobile broadband USB modem, also sold as Cmotech CNU-680 in other areas. The modem is connected to a USB port on a hp8710w mobile workstation.
As the 11.2 Gnome Network Manager won't connect this modem to Internet (see my first post here), I have downloaded and installed a 'D50 Modem Manager program' from [url]
After unpacking and installing this cmotech-qtmodem-1.6-1.i586.rpm package for suse on 11.2 x86_64, the gui application 'D-50 Modem Manager' is found in the Internet Group.
However, neither this program does connect the D-50 modem really on 11.2 x86_64 (as it did on 11.1 x86_64). Tried both traditional network setup and with Network Manager.
Any idea and suggestion how to trobleshoot this further? I think I've seen that a newer version cmotech-qtmodem 1.9 has been mentioned on the web, but without being able to find and download this version.
Command output as follows:
As normal user:
On the Modem Manager gui: D-50 modem is ready
From Login script Debug window:
As root:
It seemed like the modem connected, but Firefox was not able to connect afterwards (Server not found)
View 2 Replies
View Related
Feb 20, 2011
I am trying to use the HUAWEI E1756C USB stick to connect to the internet. Installing usb_modeswitch and usb_modeswitch-data allowed networkmanager to "recognize" the stick and set up a mobile broadband connection.
The result is that NM succeeded in connecting (one of every five attempts) but firefox does not surf, nor emails can be downloaded etc. Just like if not being connected. The USB modem shows the steady blue LED as connected.
A NM issue? I have tried disabling NM control and tried with PPP clients like NMTSMON, wvdial and even Sakis3g. All with the same results. They seem to connect and show flux up and downloaded but no surfing.
resolf.conf shows is pretty much empty and no DNS there.
The working settings in Window$ are:
Same settings with Sakis3G, or NMTSMON or NM result in connection with no action from applications that use the internet.
I have had a similar issue with WLAN each time I change to a different network. I solve that by forcing to update the DHCP. I mean using -su dhcpd wlan0
But attempts like dhcpcd ttyUSB0 or dhcpcd ttyS0 get the same result. So no idea if this is an DHCP, or DNS or another issue.
My box is an ASUS EEEPC 2005H netbook with OpenSuSE 11.2 and KDE
View 2 Replies
View Related
Feb 22, 2011
I am using open suse 11.3 with kernel 2.6.34 KDE is 4.4.4, I have Lenovo G550 laptop My system sometimes detects and connects the modem to internet and sometimes its doesn't detects and I am unable to connect to internet I have all the updates installed. Because of this I have to use Forbidden OS (windows)
View 2 Replies
View Related
Aug 19, 2010
It still works fine if I boot into "good old" Windows. I must say I am SOOO disapointed with the Network Manager in Ubuntu which was great until 10.4 and has been crap ever since. I have had so many problems with my Vodafone USB and had to find an alternative method of getting it to work. Now the last straw is that my wireless LAN card is not getting recognised on startup so I have not connectivity when at home. (USb via Vodafone is no good in my area). I am typing this via an old Windows PC because my Ubuntu just does not work anymore. I have not installed anything new so what has happened - or how can I get it to work again.
I was completely sold on Ubuntu but am now considering reverting to Windows. It would be worth paying for an operating system that actually works, even if I have all the other hassles as well. A year ago Ubuntu was great - it all worked ! Not any more how can all that good work have gone down the pan - I can't understand how anyone could let all these nertwork problems occur - it isn't just me - read the threads - it's widespread.
View 4 Replies
View Related
Sep 12, 2010
I want to install a driver for the Mobile broadband HSDPA modem of the Lenovo T510 nootebook because it dosent work with the Networkmanager.
I use opensuse 11.3 whith the kernal 2.6.34-12.
So what i want to do:
1) get attached patch
2) install and extract kernel source
3) patching and compilation (only drivers/usb/serial subdirectory)
4) copy resulting modules to kernel modules directory
If I compile: make O=../temp prepare i get a mistake.
The exactly mmessage is:
View 1 Replies
View Related
