Ubuntu Networking :: .inf Driver File For BCM4322 ?

Mar 1, 2010

I'm having problems with (no surprise) my Broadcom BCM4322 Network Adapter after a clean install of 9.10. I am just about tearing my hair out.

1. I downloaded Broadcom's provided Linux drivers. No joy.

2. I installed first the STA package, then b43-fwcutter. No joy.

3. I installed NDISwrapper, but cannot find the .inf file I need. Anyone? I dual boot with Vista, so I went into my Windows system and pulled a .inf file from the driver files there (bcmwl6.inf), but NDISwrapper said it was not valid. I have looked all over the web for a .inf driver file for this chipset but cannot seem to find anything (all I can find is .exe files).

View 9 Replies


ADVERTISEMENT

Ubuntu Networking :: BCM4322 Driver Activated But Not Working

Jun 17, 2011

I was trying to get the b43 driver work with my broadcom bcm4322 wireless card. I changed the kernel from 2.6.32 to 2.6.38 in order to make the b43 driver to work. When I booted with the new kernel the internet stopped working so I looked for a solution. I don't remember which website I went but it said that I have to re-install the STA drivers so I did that and rebooted and nothing happened. I decided to go back to the 2.6.32 kernel and re-installed the STA drivers. The wireless card (eth1) isn't showing when I run the command iwconfig

Code:
xavi@xavi-laptop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
easytether0 no wireless extensions.
xavi@xavi-laptop:~$

I'm currently running Ubuntu 10.04 Lucid Lynx

View 4 Replies View Related

Fedora Networking :: BCM4322 Broadcom Card Can't Use WEP

Jul 11, 2009

I have a Dell-made, Broadcom-based wireless card, BCM4322. I'm using Broadcom's proprietary drivers from RPM Fusion.

Code:
lspci | grep -i broadcom
09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)

Since installing F11, I can no longer connect to WEP-secured wireless. When I use automatic IP settings, the connection simply times out. When I specify an IP, Netmask, Gateway, and DNS server, NetworkManager thinks the connection properly established, but any pings time out, even when I don't specify a hostname (just an IP address). I can connect to (and use) unencrypted wireless. I haven't tried other encryption schemes. The WEP index is 1 and it's non-authenticated (open). I've been playing with the settings for over a week now with no success.

View 6 Replies View Related

Ubuntu Networking :: Wireless - Dell E4300 - Broadcom BCM4322?

Jun 13, 2010

I was praying a standard install of Ubuntu 10.04 would work out of the gate and I was wrong:- Looks like everything is working except for my wireless adapter, Dell E4300

@nix-laptop:~$ lspci | grep "Wireless"
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
@nix-laptop:~$ lsusb | grep "Wireless"
@nix-laptop:~$ lspci -nn | grep "Wireless"
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01)

[Code]...

View 3 Replies View Related

Fedora Networking :: Fc11: Broadcom BCM4322 Can't Authenticate

Jul 15, 2009

I can't get my Broadcoam BCM4322 to connect to a protected access point. I've tried the drivers from rpmfusion, and tried to build the module with the source+binary package from Broadcom, all with no luck. The failure seems to happen during the WPA negotiation.

I haven't tried connecting to an unsecured WiFi access point.

When booting this same laptop to Kubuntu 9.04, it can connect to secured, so it is possible under linux.

Here's output from lspci, and the tail of the log while KNetworkManager is trying to connect the device.

lspci | grep -i network
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)

[Code]....

View 3 Replies View Related

Ubuntu Networking :: Searching For 10.10 X64 Drivers For Wlan Broadcom BCM4322 On Vostro 1520

Oct 12, 2010

my OS is linux ubuntu x64 v10.10 on netbook dell vostro 1520. i'm looking for wlan [COLOR=#00C800 ! important][COLOR=#00C800 ! important]drivers[/COLOR][/COLOR] for network adapter broadcom like this:

Quote: Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)

View 9 Replies View Related

Fedora Networking :: Can't Connect To Network With Broadcom BCM4322 Wireless Controller

Feb 11, 2010

I installed the 64-bit version of Fedora 12 on my MacBookPro5,1, and I am unable to establish a connection to my wireless network, which I can connect to fine with I boot the computer into Mac OS X. Here is my operating system information:

Code:

$ uname -a
Linux tosh 2.6.31.12-174.2.3.fc12.x86_64 #1 SMP Mon Jan 18 19:52:07 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux

Here is information about the PCI devices available on the system:

Code:

$ lspci
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b3)

[code].....

View 7 Replies View Related

Fedora Hardware :: Bcm4322 - Switching From Ubuntu To 12?

Nov 16, 2009

i would like to make the switch to fedora but before i do want to find out whether i will have the same problem that i had with ubuntu in Fedora. Problem with Ubuntu:- The only way of running o/s ati drivers to optimise hd3000 series (r600) graphics card and opengl was by running kernel 2.6.32rc6 which renders the broadcom bcm4322 wireless card unoperational. Fedora 12 looks promising but i would like to know whether there is support for Broadcom bcm4322 wireless cards and how hard they are to get up and running.

View 14 Replies View Related

Ubuntu :: Wireless BCM4322 Slow Connection

Oct 13, 2010

I am having problems with the wl driver for the BCM4322 on 10.10.

It seems with two different routers the connection is really slow and jumpy and web pages barely want to load. I have tried a usb wireless device, and it seems to work much quicker.

Is anyone else having problems with their broadcom cards with the new update?

10.10 64 bit. Using Broadcom restricted drivers (wl)

ifconfig :

Code:
eth1 Link encap:Ethernet HWaddr 0c:60:76:0e:35:07
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::e60:76ff:fe0e:3507/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[Code].....

View 9 Replies View Related

Ubuntu Networking :: Windows Wireless Driver Not Installing .inf File?

Aug 18, 2010

I have Dell Wireless N-card 1520 on my Dell Studio 15 laptop. I have installed Ubuntu10.04 in it. My network card was not able to detect wireless connections. I have even installed 'Windows Wireless Driver' using ndiswrapper. I have latest driver for card. But when i click install .inf file , nothing happens or gets installed.

View 5 Replies View Related

Ubuntu Networking :: No Such File Or Directory - Ndiswrapper For Wirless USB Driver

Aug 24, 2010

I am trying to use ndiswrapper for an .inf file located a /home/user/downloads

The full path would then be the file at the end correct?

/home/user/downloads/netr28u.inf

I keep getting the error that couldn't open /home.user/downloads/netr28u.inf: no such file at /usr/sbin/ndiswrapper-1.9 Line 219

View 6 Replies View Related

Ubuntu Networking :: Wireless Dongle Makefile Nightmare - Don't See The Driver File In The Folder Contents

Apr 1, 2010

I'm trying to get my new Wireless USB dongle to work with Xubuntu 9.10 Karmic Koala. I've extracted the .rar file that was on the drivers CD that came with the dongle. According to the ReadMe....

The Model Name is: RT2870 Wireless Lan Linux Driver Driver Name: rt2870.o/rt2870.ko Hardware: Ralink 802.1n Wireless LAN Card Description: This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card. My issues:

1. I do not see the driver file anywhere in the folder contents... I suppose that I have to "build" it.
2. In the makefile the chipset is default set to "CHIPSET = 3070" & the folder that holds all the extracted files is named 2008_1128_RT3070_Linux_STA_v2.0.1.0 so I'm confused as to whether this dongle has a 2870 or 3070 chipset inside. Does it matter?
3. Sorry, I'm a bit of a n00bster when it comes to all this, but I'm having some problems with the build instructions. It reads:

[Code]...

View 9 Replies View Related

Ubuntu Networking :: Wireless Driver Became De-activated After Plugging In Ethernet Cable For File Sharing

Dec 10, 2010

Using ubuntu 10.10 (pinguy OS) i connected an ethernet cable from my girl's macbook pro to her lenovo ideapad s10-3t to transfer some DS9 episodes onto it. new enough to linux to have not been able to figure out how to access the files on the mac, so i disconnected the ethernet, and the wireless hasn't worked since. tried everything i know, and googling for a while (as well as searching again on this forum) to no avail.

Just before linking the 2 computers via ethernet, the wireless worked fine on the ideapad, always had; but not so after the ethernet connection that did nothing other than apparently kill the wireless. an "lshw -C network" command tells me i have a BCM4313 wireless card, and *-network UNCLAIMED. also, if i launch "install additional drivers", i see that the proprietary driver is not active.

How could merely plugging in an ethernet cable that happened to be conncected to a MBP running OSX.6 do that? and will that happen again? i thought linux was supposed to play real nice with other OS's, so why did a simple file transfer kill my wireless connectivity? i have no access to internet via ethernet cable, so i cannot just download the driver i need now. shouldn't it still be in the computer still? somewhere? is there a simple solution to this, or has the wireless driver been wiped out by plugging in the ethernet? is this a bug that should be reported?

View 3 Replies View Related

Ubuntu Networking :: Mobile Broadband Driver And Wireless Driver Disable After Rebooting 9.04!?

Jun 21, 2010

It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.

View 1 Replies View Related

Ubuntu Networking :: Uninstall/Remove Old Wireless Driver To Make Way For New Driver - RTL8191SE?

Jun 21, 2010

How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?

Here's the new driver:

I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.

View 2 Replies View Related

Ubuntu Networking :: How To Install A Driver A Wifi Reltak Driver

May 13, 2010

I just installed ubuntu and I have no wifi connection. How would I download and intsall a copy from my Win XP boot?

View 2 Replies View Related

CentOS 5 Networking :: Macbook Pro 5,5 - Late 2008 - Wireless - Download The Broadcom Driver And Create A Driver Module

Feb 20, 2010

I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.

Using these instructions....

[url]

When I make the WLAN driver, I get this:

View 2 Replies View Related

Ubuntu Multimedia :: No DVD Or File Playback With NVIDIA Driver?

Feb 3, 2010

I have installed the recommended driver for my nvidia card (185), and after much fiddling finally got my config file to stick and boot correctly, however I can't see the output of the media player or the DVD player. The files play because I can hear them, but I don't see any output. I have moved the depth to 16 bit, but I still don't get anything.

View 3 Replies View Related

Ubuntu Installation :: Graphics Driver - How To Run File As Root

Apr 1, 2010

I'm brand new to Ubuntu, and am having a small problem. I'm trying to run a graphics card driver instillation, but whenever I run the file, it says that it has to run as a root. How do I run the file as a root? The graphics card I have is an Nvidia 8800GTM.

View 5 Replies View Related

Ubuntu Installation :: Broadcom Wireless LAN Driver - ISO File

Jun 19, 2010

installing the Broadcom Wireless LAN driver. I am working from an HP Pavillion dv6-2 2150us (if that has any relevance). The problem seems to be with the installation method I have used. I burned the ISO file properly onto a CD, but I did not install through the disk boot-up method. The reason for this is because I couldn't partition my HDD correctly (I am trying to dual boot with the Windows 7 OS already installed). So, I installed Ubuntu via the option from the CD Installer through Windows 7. I am not sure how to go about getting and installing the Broadcom Wireless LAN driver onto Ubuntu.

View 1 Replies View Related

Ubuntu Installation :: Compile The Driver File Manually?

Jul 27, 2010

Here any know how to compile the driver file manually?

For example i have been insert the Realtek Ethernet card in my customized kernel and kernel can't detect the card. I know the c file 8139too.c which going to use by the realtek Ethernet card.but i don't know to how to compile the file and make this as a kernel module..

View 2 Replies View Related

Ubuntu :: Move This Driver File To The Model Folder?

Apr 29, 2011

I am trying to post a driver in ..../cups/model folder but it says"access denied....could not write to ....cups/model.how do i move this driver file to the model folder

View 1 Replies View Related

Ubuntu :: Finding Broadcom Driver File With INF Extension?

Mar 26, 2010

I need to find a Broadcom BCM4312 driver that has a .inf file extension. I cannot find one anywhere. I need to atleast once use wireless inside of ubuntu.

View 2 Replies View Related

Ubuntu :: Setting Nvidia Driver - Edit Your X Configuration File ?

May 30, 2010

Just installed Ubuntu, have no idea what I'm doing. This message appears and don't know how to do it. "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."

View 2 Replies View Related

Ubuntu :: Nvidia Beta Driver: Resolution Cannot Be Saved In Xorg File

Jan 31, 2011

I am using 10.10 64bit with a Nvidia GeForce Graphic Card on my Acer 5741G 434 Notebook.

I have always used Compiz and without it I can barely use my Notebook. Apparently I had to install the Nvidia accelerated 3d Drivers (current version) in order to use Compiz.

However I cannot enable the "normal" visual effects (right click on desktop / change bakcground/ visual effects) that are necessary for using compiz.

Also everytime I reboot my resolution goes back to 800x600 although I saved the resolution to 1366. So everytime I start my Notebook I have to go to the Nvidia X server settings and set the resolution to 1366.

What I tried until now:

- I tried to reinstall Ubuntu twice!

- I tried to unistall all nvidia Drivers and install through the terminal using the command "sh" the nvidia drivers i downloaded from their website

- I tried to use the nouveau open source driver

Additional Information:

- when I boot a logo of the nvidia BETA driver appears

- for the past couple days I even experienced another problem: the windows do not have the minimize/close and maximize buttons

I am even willing to install the System again!

I had nothing but problems with the latest 10.10 ubuntu distribiution.

View 9 Replies View Related

OpenSUSE Hardware :: Cannot Get The .sh File To Extract The Driver

Sep 13, 2011

I have problems getting a NJY touch screen (LINK) to work that I purchased a while back off ebay. Of course I let myself be fooled by the claims of the manufacturer that it works with openSUSE and did not realize that their drivers (DRIVERS) only go up 9.2 and only 32bit until it was already too late.

The first problem is that I cannot even get the .sh file to extract the driver without giving me errors and all attempts to manually extract the embedded tgz file have failed miserably. The technical support of the manufacturer is extremely limited regarding driver/installation; though they quickly respond to emails, all I got was "try the driver on our download page" - as well as answers along the line "64bit is way too advanced - nobody uses it anyway"

The panel and the controller themselves work, I could get them to work on a WinXP test box. I was hoping that given the multitude of similar panels out there there might be another way of getting it to work...

When I plug it in, dmesg reports:
[16691.691059] usb 3-3: new low speed USB device using ohci_hcd and address 2
[16691.882579] usb 3-3: New USB device found, idVendor=0eef, idProduct=0001
[16691.882585] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[16691.882588] usb 3-3: Product: Љ

[Code].....

extract that driver from the file on the manufacturer's website? If that works, is there any way to use a 32bit driver in a 64b system? Or do you think it's possible to use any of the other manufacturers' drivers by adjusting some parameters - they look pretty identical and should not differ too much?

From what I gather the lsusb output is quite similar if not identical what other people get with other controllers.

View 9 Replies View Related

General :: Install Ati 4870 Driver For .run File?

Oct 1, 2010

I have installed Linux Mint Gnome 64bit version. I have downloaded ati-driver-installer-10-9-x86_64.run file. But i don't know how can i install this file to my system :(

View 1 Replies View Related

General :: Mac Driver For The Ext4 File Format?

Feb 6, 2010

Quad processor, huge RAM, and more disk space than he knows how to use. So he decided to make it a tri-boot machine. He is a Mac 'biggot' (don't we all have our preferences?) but has been developing plugins for Cinema 4-D so he wanted to be able to span the spectrum.At any rate, we were chatting and he mentioned that he would like to be able to 'see' his Linux (he is using Ubuntu) drive while booted up in his Mac system.

View 4 Replies View Related

Software :: File Operations Through Block Driver?

Jan 25, 2010

i have written block driver. its got registered succesfully.now i want to perform file opration like opening file reading/writing data into file which is stored into device.fter registration device node is created under /dev/xxx i am not getting, through this node how to open file which is stored in device.from one document i came to know that i have to use filesystem but in that doc how to use filesystem is not explained

View 4 Replies View Related

OpenSUSE Hardware :: LBP7200Cdn - Generic Driver For 11.1 - Or A Ppd File

Mar 30, 2010

I first went to canon's official support site but I found nothing relevant. So I wondered if there was a "generic" driver for the lbp familly I saw many entries in the list when configuring the printer but none of them were indicating things like lbp familly generic driver or something indicating it shoould handle the lbp7200.

Is someone as ever configured this type of printer ? How he/she did to create the printer queue ?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved