Fedora Hardware :: Bcm4322 - Switching From Ubuntu To 12?

Nov 16, 2009

i would like to make the switch to fedora but before i do want to find out whether i will have the same problem that i had with ubuntu in Fedora. Problem with Ubuntu:- The only way of running o/s ati drivers to optimise hd3000 series (r600) graphics card and opengl was by running kernel 2.6.32rc6 which renders the broadcom bcm4322 wireless card unoperational. Fedora 12 looks promising but i would like to know whether there is support for Broadcom bcm4322 wireless cards and how hard they are to get up and running.

View 14 Replies


ADVERTISEMENT

Fedora Networking :: BCM4322 Broadcom Card Can't Use WEP

Jul 11, 2009

I have a Dell-made, Broadcom-based wireless card, BCM4322. I'm using Broadcom's proprietary drivers from RPM Fusion.

Code:
lspci | grep -i broadcom
09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)

Since installing F11, I can no longer connect to WEP-secured wireless. When I use automatic IP settings, the connection simply times out. When I specify an IP, Netmask, Gateway, and DNS server, NetworkManager thinks the connection properly established, but any pings time out, even when I don't specify a hostname (just an IP address). I can connect to (and use) unencrypted wireless. I haven't tried other encryption schemes. The WEP index is 1 and it's non-authenticated (open). I've been playing with the settings for over a week now with no success.

View 6 Replies View Related

Fedora Networking :: Fc11: Broadcom BCM4322 Can't Authenticate

Jul 15, 2009

I can't get my Broadcoam BCM4322 to connect to a protected access point. I've tried the drivers from rpmfusion, and tried to build the module with the source+binary package from Broadcom, all with no luck. The failure seems to happen during the WPA negotiation.

I haven't tried connecting to an unsecured WiFi access point.

When booting this same laptop to Kubuntu 9.04, it can connect to secured, so it is possible under linux.

Here's output from lspci, and the tail of the log while KNetworkManager is trying to connect the device.

lspci | grep -i network
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)

[Code]....

View 3 Replies View Related

Fedora Networking :: Can't Connect To Network With Broadcom BCM4322 Wireless Controller

Feb 11, 2010

I installed the 64-bit version of Fedora 12 on my MacBookPro5,1, and I am unable to establish a connection to my wireless network, which I can connect to fine with I boot the computer into Mac OS X. Here is my operating system information:

Code:

$ uname -a
Linux tosh 2.6.31.12-174.2.3.fc12.x86_64 #1 SMP Mon Jan 18 19:52:07 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux

Here is information about the PCI devices available on the system:

Code:

$ lspci
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b3)

[code].....

View 7 Replies View Related

Ubuntu Networking :: .inf Driver File For BCM4322 ?

Mar 1, 2010

I'm having problems with (no surprise) my Broadcom BCM4322 Network Adapter after a clean install of 9.10. I am just about tearing my hair out.

1. I downloaded Broadcom's provided Linux drivers. No joy.

2. I installed first the STA package, then b43-fwcutter. No joy.

3. I installed NDISwrapper, but cannot find the .inf file I need. Anyone? I dual boot with Vista, so I went into my Windows system and pulled a .inf file from the driver files there (bcmwl6.inf), but NDISwrapper said it was not valid. I have looked all over the web for a .inf driver file for this chipset but cannot seem to find anything (all I can find is .exe files).

View 9 Replies View Related

Ubuntu :: Wireless BCM4322 Slow Connection

Oct 13, 2010

I am having problems with the wl driver for the BCM4322 on 10.10.

It seems with two different routers the connection is really slow and jumpy and web pages barely want to load. I have tried a usb wireless device, and it seems to work much quicker.

Is anyone else having problems with their broadcom cards with the new update?

10.10 64 bit. Using Broadcom restricted drivers (wl)

ifconfig :

Code:
eth1 Link encap:Ethernet HWaddr 0c:60:76:0e:35:07
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::e60:76ff:fe0e:3507/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[Code].....

View 9 Replies View Related

Ubuntu Networking :: BCM4322 Driver Activated But Not Working

Jun 17, 2011

I was trying to get the b43 driver work with my broadcom bcm4322 wireless card. I changed the kernel from 2.6.32 to 2.6.38 in order to make the b43 driver to work. When I booted with the new kernel the internet stopped working so I looked for a solution. I don't remember which website I went but it said that I have to re-install the STA drivers so I did that and rebooted and nothing happened. I decided to go back to the 2.6.32 kernel and re-installed the STA drivers. The wireless card (eth1) isn't showing when I run the command iwconfig

Code:
xavi@xavi-laptop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
easytether0 no wireless extensions.
xavi@xavi-laptop:~$

I'm currently running Ubuntu 10.04 Lucid Lynx

View 4 Replies View Related

Ubuntu Networking :: Wireless - Dell E4300 - Broadcom BCM4322?

Jun 13, 2010

I was praying a standard install of Ubuntu 10.04 would work out of the gate and I was wrong:- Looks like everything is working except for my wireless adapter, Dell E4300

@nix-laptop:~$ lspci | grep "Wireless"
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
@nix-laptop:~$ lsusb | grep "Wireless"
@nix-laptop:~$ lspci -nn | grep "Wireless"
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01)

[Code]...

View 3 Replies View Related

Ubuntu Networking :: Searching For 10.10 X64 Drivers For Wlan Broadcom BCM4322 On Vostro 1520

Oct 12, 2010

my OS is linux ubuntu x64 v10.10 on netbook dell vostro 1520. i'm looking for wlan [COLOR=#00C800 ! important][COLOR=#00C800 ! important]drivers[/COLOR][/COLOR] for network adapter broadcom like this:

Quote: Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)

View 9 Replies View Related

Fedora :: Switching To Kdm In 11?

Jul 29, 2009

I want to use KDM, but I cant find where to change default gdm to kdm.

View 2 Replies View Related

Fedora :: Can't Even Log Out Or Shutdown Without Switching To A TTY?

Nov 22, 2009

Recently upgraded to Fedora 12 and I installed the Moblin Desktop Environment with

Code:
yum groupinstall "Moblin Desktop Environment" The DE works but there are no applications of anykind installed except for volume control and network devices, I can't even log out or shutdown without switching to a TTY.

I have used moblin before and I'm assuming I am just missing some part of the environment? How can I get those base apps installed?

View 2 Replies View Related

Fedora :: Clock Changes When Switching To XP?

Mar 5, 2010

Everytime i switch between XP and Fedora, my system clock changes with +/- 2 hours.... So I have to adjust my system time everytime.

View 2 Replies View Related

Fedora Installation :: Switching From GNOME To KDE?

May 22, 2009

I am trying to switch desktops managers from GNOME to KDE followed the wiki page but can't seem to get it right as in my /etc/sysconfig folder there is no desktop file to be modified to tell my system to use KDE at startup. download a new F10/KDE live cd today and try the install that way if I get the chance to do that. But if I can't...

View 14 Replies View Related

Fedora :: Switching One Hard Drive To Another?

Jun 29, 2010

novice user the command to switch from one hard drive to another?

View 6 Replies View Related

Fedora :: VT Switching Doesn't Work?

Aug 28, 2010

For some reason Ctrl+Alt+Fn doesn't work on my Fedora 13 workstation using the nvidia driver. I specified the following in my xorg.conf but it doesn'tption "DontVTSwitch" "off"It is probably not even an Xorg problem because VT switching doesn't work in runlevel 3 either.

View 4 Replies View Related

Fedora :: Switching Between (fullscreen) Applications Aka Alt+tab

Nov 22, 2010

Switching applications, done by pressing alt+tab usually succeeds. However it fails (doesnt do anything) when i am in fullscreen applications, read games. How can i happily switch applications again?

View 2 Replies View Related

Fedora :: Switching To F15 Secure Accounts

Jun 30, 2011

In the upcoming days I will be formatting my F14 box and switching to F15. Now I have offered a friend to use some of my storage (8TB) as a ackup for her personal files/photos. I want to set it up so that she can be sure she is the only one having acces to it (so not even I can read them as root).How can I set this up. encryption? account configuration?

Most likely she will upload via secure FTP.She trusts me, but I want to provide her with the piece of mind that it is not accessible by anyone but her.

View 1 Replies View Related

Fedora :: PC Locks Up - Switching Off Only Way To Recover It

Aug 7, 2011

I'm running Fedora 15 64bit on a HP Elitebook 8740w. I have both Gnome and XFCE installed, and have only noticed this problem while using XFCE, but that may just be because I am using XFCE more than Gnome (that's another story - which I won't go into!). Anyhow, twice in the past 3 days I've been in the middle of using the PC, and it has "locked up". By that I mean, using the keyboard and mouse have no effect. The display does not change, moving the mouse does not move the cursor from it's current position. And keyboard commands seem to have no effect (I've tried ctrl-alt-backspace, ctrl-alt-delete, and alt-F1, alt-F2, etc.). The only way I can continue using the computer is to hold in the power button until it powers off.

I suspect, but can't be sure, that it may only be a problem while I'm in XFCE. The reason I say this is that the first time it happened, I was trying to do a screen capture using The Gimp while in XFCE. Today I also tried to do another screen capture (again whilst in XFCE), and X kicked me out back to the login prompt. I then logged into Gnome and was able to successfully do the screen capture. Later in the day I was using XFCE and programming in SpringSource Tool Suite, when the "lock up" occurred again, requiring me to switch the PC off again. I've had a bit of a look in /var/log/Xorg.0.log.old and it finishes like this. I'm not sure if it is enough info to track down the problem though?

[Code]....

View 2 Replies View Related

Red Hat / Fedora :: Switching From Windows 7 To CentOS?

Mar 20, 2010

I have a computer with the release candidate of Windows 7 (which is now expired) that I'm intending to switch over to CentOS. Is there anything I should do(besides backing up files) before I try to install CentOS?

View 9 Replies View Related

Fedora :: Switching Workspace Freezes Desktop

Sep 3, 2009

I have 2 workspaces and when i switch to the 2nd one (either with Ctrl-Alt-Left or by clicking with the mouse) after loging in, the desktop freezes. I have to do a Ctrl-Alt-Backspace to kill the xserver and log in again. Removing the workspace switcher and adding it again does not solve the problem. And I can't find any message in the logs.

[code]...

View 1 Replies View Related

Fedora :: Crackling Noise When Switching Songs / Fix It?

Mar 18, 2010

I seem to be getting a crackling noise when switching songs in Rythmbox.
This happens with headphones and without...

Does anyone know this might be and how to fix it?

View 2 Replies View Related

Fedora Networking :: No Isdn Subsystem After Switching To 13?

Jun 20, 2010

I run in some trouble with my isdn card after switching from fedora 10 to fedora 13 (new installation, no upgrade) I made a default installation, after install and reboot/update I noticed that isdn4k-utils is not installed and I installed it manually. For setup of my isdn card I used system-config-network. But activate isdn (load kernel modules) fails, also with /etc/init.d/isdn start There is no isdn device: output cat /proc/net/dev

Code:

Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 945856 2413 0 0 0 0 0 0 945856 2413 0 0 0 0 0 0
eth0:19685713 159678 0 0 0 0 0 0 87669282 139783 0 0 0 0 0 0

output lspci

Code:

05:00.0 Network controller: Elsa AG QuickStep 1000 (rev 01)

I suppose I forgot something at installation time. With fedora 10 everything works fine.

edit: part of /var/log/messages:

Code:

Jun 20 08:46:14 videoserver system-config-network[22408]: rm //etc/sysconfig/networking/profiles//default/resolv.conf
Jun 20 08:46:14 videoserver system-config-network[22408]: ln //etc/resolv.conf //etc/sysconfig/networking/profiles//default/resolv.conf
Jun 20 09:46:24 videoserver kernel: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded

[code].....

View 1 Replies View Related

Fedora Hardware :: Switching From Nvidia To Radeon

Jun 24, 2010

I have been running F12 w/ an Nvidia board (GE Force 5200) for some time now. I installed and configured that board as per the instructions on this forum (very good ones too!) and have had no problems, other than it would not connect directly to a digital/HDMI port, nor would it do vdpau, since it was an older card.

But now, I have a Radeon VisionTek 1550, that has dual outputs, one of which is DVI-D, and I have an adapter to HDMI that actually works well.

I have managed to remove most of the nvidia stuff from F12, in particular the kernel module. But I keep finding various libs getting loaded that are NVidia based. In particular, with xbmc it is looking for OpenGL rendering, and finds an NVidia version.

Sorry for the long diatribe, but how to I get rid of all of these references completely, without reinstalling fedora from scratch?

Also, another question about the radeon configuration: how do I enable and configure radeon's theatre mode via xorg.conf? FWIW: if I run aticonfig I get "no card found".

View 10 Replies View Related

Fedora :: Switching Between Nvdia And Nouveau Drivers?

Jul 8, 2011

I have Fedora 15 installed in my PC and I use it both for gaming and work. Now the open source nouveau driver was working fine, until I had to install the nvidia driver so that I could play torcs, as I was unable to get good graphics in nouveau. Now, when using the nvidia driver, the gnome shell has become too slow and sometimes unworkable, though games run good. Is there any way so that I can use both the drivers and switch between them when needed (say use nvidia when gaming and nouveau while at work) without uninstalling and reinstalling them?

PS: when I boot up, the grub shows two options, one is the fedora with latest kernel and other is the old kernel. Is there a possible way that I use nouveau with old kernel and nvidia in the new kernel? This will really help in switching games and work.

View 1 Replies View Related

Red Hat / Fedora :: Freezes At Boot After Switching Desktop?

Mar 29, 2010

As my inspirations forced me to download Kde desktop on my Fedora12 with default gnome desktop. It took me whole night to get the big download by -

"Yum install @kde-desktop"

It got installed successfully.

What I did after that was -

"switchdesk kde"

...Voila...and strange thing happened. The gnome remained there but all the kde features started getting included in there like koffice, kopete etc . Now I waited for around 3 hrs. but only lower task bar of kde got installed and that too very unstable. So I thought of logging out and starting a new session with kde but It never got logged in again. It froze at boot time with Fedora logo, damn.

I have two kernels installed and configured at boot, one is 2.6.31.X (default) and the other is 2.6.32.X which I installed to get my BCM4312 wireless activated and all the activity being done on this.

View 3 Replies View Related

Fedora :: Yum Update - Keeps Hanging And Switching Mirrors During Downloads

Jul 20, 2009

Almost every other time I run yum update, I'm getting mirror problems - this is losing all my confidence in Fedora for several reasons: a) it's wasting time - what should be 1-2 minute updates are taking 5-10 minutes and often (like tonight) not even completing b) since it keeps hanging and switiching mirrors during downloads I wonder if the updates are coming thru okay c) the fact this is not being seriously addressed makes me wonder re Fedora quality. Add to that the constant and real annoying kernel errors popping up re network manager and sierra wireless (even when my sprint card is not plugged in).

View 8 Replies View Related

Fedora :: Switching Keyboard Layouts Using Windows Manager?

Nov 17, 2009

In Fedora 11 I cannot switch keyboard layouts between English-Russian-Ukrainian when using window managers other than Gnome/Metacity/Openbox. However, I can see my custom "us,ru,ua" layout in GDM. My "/etc/hal/fdi/policy/10-keymap.fdi" file is as follows:

Code:
<?xml version="1.0" encoding="ISO-8859-1"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>

<match key="info.capabilities" contains="input.keys">
<merge key="input.xkb.rules" type="string">base</merge>
<!-- If we're using Linux, we use evdev by default (falling back to keyboard otherwise). -->
<merge key="input.xkb.model" type="string">keyboard</merge>
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" string="Linux">
<merge key="input.xkb.model" type="string">evdev</merge>
</match>

<merge key="input.xkb.layout" type="string">us,ru,ua</merge>
<!-- <merge key="input.xkb.variant" type="string">,,winkeys</merge> -->
<merge key="input.xkb.options" type="string">grp:ctrl_shift_toggle,grp_led:scroll</merge>
</match>
</device>
</deviceinfo>

The file "/etc/sysconfig/keyboard" is
Code:
KEYBOARDTYPE="pc"
KEYTABLE="ru-cs"
LAYOUT="us,ru,ua"
MODEL="pc105+inet"
OPTIONS="grp:ctrl_shift_toggle,grp_led:scroll"
VARIANT=""
Does this problem persist in Fedora 12?

View 1 Replies View Related

Fedora :: Gnome Oddity / Mouse Switching Buttons

Jan 15, 2010

I typically have pidgin and amsn, as well as firefox and thunderbird running.Once in a while, the left mouse button ceases to function as the left button, and the right button becomes the left button, or almost.. I wonder if this is a bug, or am I hitting the left-handed-mouse function while typing accidentally??

View 2 Replies View Related

Fedora :: Nautilus Doesn't Work After Switching From KDE To GNOME

Jan 20, 2010

I recently switched my desktop environment from KDE-4.3.4 to GNOME-2.28-2 and I did that by installing most of the gnome-packages and uninstalling pretty much all of the kde-ones. After reboot everything worked fine except the file browser that doesn't seem to care about my feelings. It launches and when I try to kill the process the status changes from sleeping to uninterruptible and then back to sleeping. The only way is to reboot but that isn't a solution.Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

View 14 Replies View Related

Fedora :: Changing Keyboard Shortcut For Switching Between Workspaces?

Nov 8, 2010

I'd like to change the keyboard shortcuts for switching between workspaces. I have compiz enabled. In Ubuntu I see entries for these keyboard shortcuts in the Keyboard Shortcuts preferences app. They are not there on my Fedora 14 system. How can I add them?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved