Ubuntu Networking :: How To Ssh To Computer With Dhcp
Jul 9, 2010
I have a small server that will collect industry machine info and report it to our main server here. Now, we plan to make a few of these units but we will need to be able to remote into them (ssh) to kick off the operations when they are delivered. Problem is, how can i ssh into a machine that has an ip given by dhcp? I could have the server send me it's internal and external ip, but that still does not open port 22 (or whatever i need) on the router so i can get to it from an outside line.
View 3 Replies
ADVERTISEMENT
Aug 18, 2010
I set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies
View Related
Sep 10, 2010
I have two Linux computers and one small home router with DHCP functionality. I configured the router with the "dynamic DHCP" setting, ie, the static DHCP with MAC-Address was not used. Before that, I used the manual IP configuration, defining the two computers' names in the /etc/hosts file.
Example:
10.0.0.2 comp2
10.0.0.3 comp3
Now, with DHCP, the above example is no longer appropriate, because the DHCP server is supposed to tell the computer what IP number it will receive. However, I am missing something, because I haven't figured it out yet how to make one computer know the other computer's name. Is it that I haven't installed a name-finding package? Is there a simple way to accomplish this (one computer finding the other computers' names)?
View 9 Replies
View Related
Dec 7, 2010
I got a machine with RedHat Enterprise Linux 5 installed. I set the ifcfg-eth0 as following:
Code:
DEVICE=eth0
BOOTPROTO=dhcp
ONBOOT=yes
TYPE=Ethernet
when the machine rebooted, eth0 has the ip address 192.168.24.234. But if executing 'dhclient', eth0 will get the ip address 10.200.34.208, which is my expected ip address. I'm not quite familiar with networking things. I don't know what's going on there. Why should I need to execute 'dhclient' to obtain the expected ip address? Is there any way to obtain the ip address 10.200.34.208 right after host boot?
View 3 Replies
View Related
Dec 29, 2010
at the moment we're running an isc dhcpd with about 300 clients to serve. Because of inconsequent maintaining i think we have about over 50 dead static client entries in our dhcpd.conf. So we want to change our construct.Our aim is to allow a mac on the dhcp server to get an ip address. If this mac hasn't registered an ip address from the dhcp server for a time more than 90 days, the host entry gets disabled or deleted automatically. I'm searching for such kind of dhcp server configuration for many days. Have you any idea if there is a possibility to implement such a configuration?
View 1 Replies
View Related
Oct 22, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 6 Replies
View Related
Jul 1, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 2 Replies
View Related
Mar 8, 2010
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies
View Related
Mar 25, 2010
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
View 2 Replies
View Related
Mar 11, 2010
using Debian 5.0, GNOME desktop.my DSL service was to be connected today.the problem is my DSL light keeps blinking.ethernet light is solid.how do i setup my DHCP on my computer
View 12 Replies
View Related
Sep 30, 2010
The dhcp doesnt work unless i put a switch or router between the ubuntu gateway and the connecting computer.
setup
Code:
Code:
Code:
Code:
Im on ubuntu 10.04. is this normal? or should i be able to connect without having a router or switch between the ubuntu server and the internal network....
View 3 Replies
View Related
Sep 24, 2010
First, (for samba) how do I determine whether my computer "gets IP address information from a dhcp server on the network," and whether "the dhcp server provides info about WINS servers ("NetBIOS name servers") present on the network," and consequently whether a change to my smb.conf file, "so that DHCP-provided WINS settings will automatically be read from /etc/samba/dhcp.conf," and whether the dhcp3-client package must be installed?
View 2 Replies
View Related
Nov 11, 2010
My wifes networked computer connected to the network just fine when it was Win XP. Now that Ive converted it to 10.04 (completely) it can see the network, but it just wont connect to it. I had no problem converting my computer to Ubuntu and it sees the network and accesses it great. Files, folders and hard drives are all shared. So, one computer connects great, the other does not.**I dont know what to do at this point.Here is the layout:My Comp (10.04) ---------......Main Network Comp (XP)Wife Comp (10.04) -------/The main network computer is XP as it has software on it we need that does not work in Wine. The main computer will have to stay XP. I cannot get my wifes computer to connect to the main system, although mine connects just fine. I dont know what the problem is. Her computer sees the network, but when trying to connect, it times out and says unable to connect.
View 2 Replies
View Related
Sep 21, 2010
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies
View Related
Aug 4, 2010
I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies
View Related
Oct 31, 2010
I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices. My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server. One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network. However I have no idea how this could be setup.
View 2 Replies
View Related
Jun 7, 2010
i want to find ip address of other computer which are connected in LAN..suppose ther are 5 compter in LAN and i want to find ip of all remaining 4 computer using my computer only in command or any other way is ther....
View 4 Replies
View Related
Feb 8, 2010
first: PXE flawless bind to dhcp address but put next binding state to free second: when installer calls init script to reinit ethernet driver (e1000 (vmware)) binding fails 11.2 opensuse fail to reinit dhcp with log entry "no free leases" third: when manual set network install works how to preserve dhcp lease on reinit of driver?
View 1 Replies
View Related
Aug 22, 2010
I want to run networking on my laptops in different environment (home, office, airport etc). I found that Netowrk Manager assigns information from DHCP although I requested fixed IP and configured the gateway and DNS. If I reconfigure the DHCP server so that there is no free IP address, the laptop refuses to connect. When I remove the interfaces from the network manager, I get the fixed IP address, /etc/resolv.conf is not overwritten from DHCP but WiFi connection cannot be established, there is no dialog for setting WPA-PSK. The static IP address seems to be taken into account only if the DHCP server is not found. I need the static address at home and in my office because I need the possibility to ssh to my laptop from another computer but I need IP from DHCP possibly authenticating against RADIUS (Eduroam) when travelling somewhere else. Is there an easy way how to achieve it and how to switch profiles easily? And I cannot switch DHCP off because some devices in my LAN cannot work without it.
View 6 Replies
View Related
Jan 1, 2010
I downloaded the vnc 4.1 on my linux computer which is running Ubuntu I'm not sure how to view it on a windows computer. I really have no idea what i'm doing so can anyone that answers please add as much detail as possible.
View 3 Replies
View Related
Aug 16, 2010
apparently someone on my LAN is running his own DHCP server (by mistake i assume) and broadcasting an address (it is 192.168.1.155) prevents me to connect to the 'real' DHCP server (195.249.186.1) thus the internet. how can i connect to my usual DHCP server? what commands should i use?
View 5 Replies
View Related
Aug 20, 2010
I had my laptop at work for a few days and when I brought it home I couldn't open up web pages any more. I have a DHCP connection (shaw cable).When I plug the chord from the modem into my windows machine I can open up web pages. When I plug it into my ubuntu laptop I can't open up web pages.
I have tried unplugging the modem and restaring my computer.I think that there is some sort of connection because when I open up Network tools it shows that I am continually receiving packets. As soon as I unplug the ethernet wire I stop receiving packets. For some reason I just can't open web pages.I also tryed typing 'sudo ifconfig' and 'sudo dhclient' in a terminal. I don't fully understand what this means but I saw it in another forum.
View 4 Replies
View Related
Feb 19, 2011
I just installed ubuntu for the first time, and I am not very familiar with everything yet but i am trying to connect to my university's wireless network and can't seem to figure it out. These are the directions they provide for linux users:
Use linuxconf Start linuxconf, go to Basic Host Information under Networking and Client Tasks.
Click Adapter 1, and select DHCP.
Click OK and Apply Changes.
Finally, reboot
I tried running linuxconf from the terminal but no such command exists, is there a similar one for ubuntu?
View 1 Replies
View Related
Aug 2, 2011
Recently, I have encountered a problem when setting my network configuration.I want to automatically get an IP address through DHCP at system startup, and this can be done by editing /etc/network/interfaces file, adding
auto eth0
iface eth0 inet dhcp
The problem is that I want to set a static DNS, but DHCP will automatically overwritten /etc/resolv.conf file.
What should I do?
View 9 Replies
View Related
Jan 13, 2010
Alright, I'm running Ubuntu KK 9.10 and I've probably read every ICS tutorial on ubuntuforums. I'm running wireless internet via a Linksys router and have a LAN card in my system as well.
(lshw -c network)
Code:
I tried the easy route with 9.10 (setting my wireless to DHCP and LAN to share connection) and although Ubuntu recognizes the Xbox when its turned on (I get a nice notification saying my wired connection is active) the Xbox gets no internet, and doesn't even recognize the connection. (when I tested the connection it failed before it even hit network...)
View 5 Replies
View Related
Feb 7, 2010
I have a home WiFi network that has been working fine for ages, which currently supports two Windows-based laptops and a WM5 smartphone. They all connect to the WiFi router (Linksys WRT54G) which in turn connects to the ADSL modem (Huawei MT882). The router is configured with a WEP key, the SSID is not being broadcast, and all MAC addresses must be whitelisted. I try to follow good wireless network security practice. I also have NAT running between the router and the modem.
Everything is working fine for the Windows clients, and now I am trying to add my Linux box to the mix. I am setting up an older HP Pavilion 510a desktop with Ubuntu v8.04LTS, using a Realtek RTL8185 WLAN card. The machine has an onboard RTL8139 LAN adaptor also, which works fine when I plug it in directly to an ethernet port on the wireless router. The WLAN, however, does not seem to be getting a DHCP packet, and keeps on autoconfiguring with a 169.254.x.x address. When I try giving it a static IP address it doesn't connect either.
As you can see from the screenshots below, the WLAN is working fine. I have it installed using the ndiswrapper and Windows drivers. I've been through the Comprehensive ndiswrapper troubleshooting guide but that did not resolve my problem.
I configured the network myself, and it works perfectly for my Windows machines. It is just my lack of experience with Linux which is preventing me from getting the wireless to work under Linux. I can get a HDCP packet in Linux when I am connected to the LAN using the RTL8139 adaptor, but not on the WLAN using the RTL8185 adaptor.
View 9 Replies
View Related
Mar 4, 2010
I using ubuntu 9.04. It was connected to the network with the manual IP Settings. Now the server settings have changed and we are supposed to move to Auto Assign IP (DHCP). All the windows machines are working fine, those are connected to network and using internet. But the ubuntu machine is not getting connected. Is there any any additional setting required for DHCP?
View 2 Replies
View Related
Mar 18, 2010
I'm trying to share an internet connection between two computers. The one currently online is a HP Presario running Ubuntu 9.10, and connects through a wireless connection. It has an ethernet port, which I'm hoping to use to connect to a Dell Desktop running Windows XP pro SP 3. I'm hoping to make this happen one of two ways.
1. Without having to mess with any DHCP settings. Sadly, I live with my parents, and the router in their room uses DHCP and sets the addresses for all the computers on the network. My parents don't want me screwing with any of the settings on the router. is there a way to just have Ubuntu pass information from the ethernet connection to the wireless connection without having to deal with DHCP.
2. I'm sure this has been explained, but as I'm new to Ubuntu, I will pretty much need step by step instructions to do this part. Sorry to be difficult. Is there a way to have Ubuntu keep the current settings it has on the wireless side (let the router determine it's address and all of that good stuff), but have a DHCP server kick in on the hard-wired side so Internet Connection Sharing has an address to look for on the laptop?
View 7 Replies
View Related
May 21, 2010
basically I set the static ip address:
auto lo
iface lo inet loopback
auto seth0
iface seth0 inet static
[code]....
Restart networking:
"sudo /etc/init.d/networking restart"
Everything is fine but 24 hours later the server resets to the DHCP address assigned to it. I have not installed any GUI im just running Ubuntu 10.04 LTS in Hyper V. After it resets to DHCP I log into it using the dhcp address and reset the networking service "sudo /etc/init.d/networking restart". It goes back to the static IP specified in interfaces. I have rebooted several times but every 24 hours it resets.
BTW - Before someone asks about iface seth0 instead of it being iface eth0. It is a Hyper V module running.[URL]
Also FYI-
# ps -ef | grep dhclient
root 1234 1 0 May19 ? 00:00:00 dhclient3 -e IF_METRIC=100 -pf /var/run/dhclient.seth0.pid -lf /var/lib/dhcp3
[code]....
View 7 Replies
View Related
Jul 10, 2010
On a macbook5,4, running (ordinarily) Kubuntu 10.04 - connecting to any unsecured wireless network fails, and in syslog appears:
Code:
Jul 10 17:26:34 jagadai dhcpcd[6460]: eth1: dhcpcd 3.2.3 starting
Jul 10 17:26:34 jagadai dhcpcd[6460]: eth1: hardware address = aa:00:04:00:0a:04
Jul 10 17:26:34 jagadai dhcpcd[6460]: eth1: DUID = 00:01:00:01:13:b4:bb:00:aa:00:04:00:0a:04
Jul 10 17:26:34 jagadai dhcpcd[6460]: eth1: broadcasting for a lease
[Code]....
View 1 Replies
View Related
