apparently someone on my LAN is running his own DHCP server (by mistake i assume) and broadcasting an address (it is 192.168.1.155) prevents me to connect to the 'real' DHCP server (195.249.186.1) thus the internet. how can i connect to my usual DHCP server? what commands should i use?
View 5 RepliesBack in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies View RelatedI am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies View RelatedI have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices. My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server. One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network. However I have no idea how this could be setup.
View 2 Replies View Relatedfirst: PXE flawless bind to dhcp address but put next binding state to free second: when installer calls init script to reinit ethernet driver (e1000 (vmware)) binding fails 11.2 opensuse fail to reinit dhcp with log entry "no free leases" third: when manual set network install works how to preserve dhcp lease on reinit of driver?
View 1 Replies View RelatedI want to run networking on my laptops in different environment (home, office, airport etc). I found that Netowrk Manager assigns information from DHCP although I requested fixed IP and configured the gateway and DNS. If I reconfigure the DHCP server so that there is no free IP address, the laptop refuses to connect. When I remove the interfaces from the network manager, I get the fixed IP address, /etc/resolv.conf is not overwritten from DHCP but WiFi connection cannot be established, there is no dialog for setting WPA-PSK. The static IP address seems to be taken into account only if the DHCP server is not found. I need the static address at home and in my office because I need the possibility to ssh to my laptop from another computer but I need IP from DHCP possibly authenticating against RADIUS (Eduroam) when travelling somewhere else. Is there an easy way how to achieve it and how to switch profiles easily? And I cannot switch DHCP off because some devices in my LAN cannot work without it.
View 6 Replies View RelatedI have a small server that will collect industry machine info and report it to our main server here. Now, we plan to make a few of these units but we will need to be able to remote into them (ssh) to kick off the operations when they are delivered. Problem is, how can i ssh into a machine that has an ip given by dhcp? I could have the server send me it's internal and external ip, but that still does not open port 22 (or whatever i need) on the router so i can get to it from an outside line.
View 3 Replies View RelatedI had my laptop at work for a few days and when I brought it home I couldn't open up web pages any more. I have a DHCP connection (shaw cable).When I plug the chord from the modem into my windows machine I can open up web pages. When I plug it into my ubuntu laptop I can't open up web pages.
I have tried unplugging the modem and restaring my computer.I think that there is some sort of connection because when I open up Network tools it shows that I am continually receiving packets. As soon as I unplug the ethernet wire I stop receiving packets. For some reason I just can't open web pages.I also tryed typing 'sudo ifconfig' and 'sudo dhclient' in a terminal. I don't fully understand what this means but I saw it in another forum.
I just installed ubuntu for the first time, and I am not very familiar with everything yet but i am trying to connect to my university's wireless network and can't seem to figure it out. These are the directions they provide for linux users:
Use linuxconf Start linuxconf, go to Basic Host Information under Networking and Client Tasks.
Click Adapter 1, and select DHCP.
Click OK and Apply Changes.
Finally, reboot
I tried running linuxconf from the terminal but no such command exists, is there a similar one for ubuntu?
Recently, I have encountered a problem when setting my network configuration.I want to automatically get an IP address through DHCP at system startup, and this can be done by editing /etc/network/interfaces file, adding
auto eth0
iface eth0 inet dhcp
The problem is that I want to set a static DNS, but DHCP will automatically overwritten /etc/resolv.conf file.
What should I do?
Alright, I'm running Ubuntu KK 9.10 and I've probably read every ICS tutorial on ubuntuforums. I'm running wireless internet via a Linksys router and have a LAN card in my system as well.
(lshw -c network)
Code:
I tried the easy route with 9.10 (setting my wireless to DHCP and LAN to share connection) and although Ubuntu recognizes the Xbox when its turned on (I get a nice notification saying my wired connection is active) the Xbox gets no internet, and doesn't even recognize the connection. (when I tested the connection it failed before it even hit network...)
I have a home WiFi network that has been working fine for ages, which currently supports two Windows-based laptops and a WM5 smartphone. They all connect to the WiFi router (Linksys WRT54G) which in turn connects to the ADSL modem (Huawei MT882). The router is configured with a WEP key, the SSID is not being broadcast, and all MAC addresses must be whitelisted. I try to follow good wireless network security practice. I also have NAT running between the router and the modem.
Everything is working fine for the Windows clients, and now I am trying to add my Linux box to the mix. I am setting up an older HP Pavilion 510a desktop with Ubuntu v8.04LTS, using a Realtek RTL8185 WLAN card. The machine has an onboard RTL8139 LAN adaptor also, which works fine when I plug it in directly to an ethernet port on the wireless router. The WLAN, however, does not seem to be getting a DHCP packet, and keeps on autoconfiguring with a 169.254.x.x address. When I try giving it a static IP address it doesn't connect either.
As you can see from the screenshots below, the WLAN is working fine. I have it installed using the ndiswrapper and Windows drivers. I've been through the Comprehensive ndiswrapper troubleshooting guide but that did not resolve my problem.
I configured the network myself, and it works perfectly for my Windows machines. It is just my lack of experience with Linux which is preventing me from getting the wireless to work under Linux. I can get a HDCP packet in Linux when I am connected to the LAN using the RTL8139 adaptor, but not on the WLAN using the RTL8185 adaptor.
I using ubuntu 9.04. It was connected to the network with the manual IP Settings. Now the server settings have changed and we are supposed to move to Auto Assign IP (DHCP). All the windows machines are working fine, those are connected to network and using internet. But the ubuntu machine is not getting connected. Is there any any additional setting required for DHCP?
View 2 Replies View RelatedI'm trying to share an internet connection between two computers. The one currently online is a HP Presario running Ubuntu 9.10, and connects through a wireless connection. It has an ethernet port, which I'm hoping to use to connect to a Dell Desktop running Windows XP pro SP 3. I'm hoping to make this happen one of two ways.
1. Without having to mess with any DHCP settings. Sadly, I live with my parents, and the router in their room uses DHCP and sets the addresses for all the computers on the network. My parents don't want me screwing with any of the settings on the router. is there a way to just have Ubuntu pass information from the ethernet connection to the wireless connection without having to deal with DHCP.
2. I'm sure this has been explained, but as I'm new to Ubuntu, I will pretty much need step by step instructions to do this part. Sorry to be difficult. Is there a way to have Ubuntu keep the current settings it has on the wireless side (let the router determine it's address and all of that good stuff), but have a DHCP server kick in on the hard-wired side so Internet Connection Sharing has an address to look for on the laptop?
basically I set the static ip address:
auto lo
iface lo inet loopback
auto seth0
iface seth0 inet static
[code]....
Restart networking:
"sudo /etc/init.d/networking restart"
Everything is fine but 24 hours later the server resets to the DHCP address assigned to it. I have not installed any GUI im just running Ubuntu 10.04 LTS in Hyper V. After it resets to DHCP I log into it using the dhcp address and reset the networking service "sudo /etc/init.d/networking restart". It goes back to the static IP specified in interfaces. I have rebooted several times but every 24 hours it resets.
BTW - Before someone asks about iface seth0 instead of it being iface eth0. It is a Hyper V module running.[URL]
Also FYI-
# ps -ef | grep dhclient
root 1234 1 0 May19 ? 00:00:00 dhclient3 -e IF_METRIC=100 -pf /var/run/dhclient.seth0.pid -lf /var/lib/dhcp3
[code]....
On a macbook5,4, running (ordinarily) Kubuntu 10.04 - connecting to any unsecured wireless network fails, and in syslog appears:
Code:
Jul 10 17:26:34 jagadai dhcpcd[6460]: eth1: dhcpcd 3.2.3 starting
Jul 10 17:26:34 jagadai dhcpcd[6460]: eth1: hardware address = aa:00:04:00:0a:04
Jul 10 17:26:34 jagadai dhcpcd[6460]: eth1: DUID = 00:01:00:01:13:b4:bb:00:aa:00:04:00:0a:04
Jul 10 17:26:34 jagadai dhcpcd[6460]: eth1: broadcasting for a lease
[Code]....
I have 2 Ethernet connections, one (eth0) for the internet which gets set with dhcp, and one (eth1) for my internal network on which I have dhcp3-server running. I set eth1 to use static IP in interfaces, but every time I reset the network, it is fine for a couple of minutes, and switches over do being served by my own dhcp server on the same machine. (the interfaces file clearly says "iface eth1 inet static")
View 7 Replies View RelatedI am trying to connect to a WEP encrypted WLAN without using the DHCP server of the AP. (=giving myself a static IP)
So far i have tried:
Code:
But i cant even ping 192.168.1.1 (Network unreachable error). Is it possible that Ubuntu tries to use eth0 (which was connected to a similar /16 before) to ping 192.168.1.1 or is there somethign wrong with my commands?
Also will an AP allow access to the network although i don't have an IP from its DHCP server?
I reinstalled Ubuntu server, now, as always I have to start off with 8.04 then upgrade to 10.04, and I've never had a problem with this before on this machine or any other for that matter. The problem is, this time I have installed and Ubuntu installer cannot see a DHCP, I go a head and install anyway and fire up Ubuntu and there is no internet access, I have two network cards plugged in, when I type in ifconfig it shows only lo and no network cards, and yet when I check lspci ot shows both network cards are there and when either are plugger in it shows connection on both the connector at the stack end and on the router.
View 5 Replies View RelatedWhere I work we use almost exclusively Ubuntu 8.04 in command-line only form. I need to know if it is possible to configure one of these devices to use DHCP and a given Static IP at the same time. I know how to do one, or the other, but not both. #1. Is this possible?
#2. If so, how?P.S. Yes, I did look around before I asked this, but I could not find anything. Maybe I suck at searching?
I had the wrong WPA password.[/blush] It appeared to me that it was connected OK at the physical/datalink level but apparently that was not the case.I've set up an old PC with the latest Ubuntu desktop and am trying to set up wireless networking with a TP-Link TL-WN722N. It only came with Windows drivers but from a thread elsewhere I got it to where it finds my router and connects with the password. However, it doesn't pick up its IP details. The router is working fine wirelessly on my phone and wirefully on my other PC.
I've edited /etc/network/interfaces with "auto wlan0" and "iface wlan0 inet dhcp" but after restart the wlan0 interface has no IP details. Originally the interface had IPv6 details but I cleared that with ifconfig. Under the Network Connections Wireless tab it has "Auto" followed by the name of my wireless connection so it appears to have connected OK. Now when I click Edit for that connection nmame, the IPv6 tab says Ignore and IPv4 says Automatic (DHCP) but Addresses is greyed out and the other fields are all empty.
I am trying to configure an external wireless bridge for a few systems to replace a very long, duct taped cable.
I have it set up and it is connecting, at least I can see the pfsense router on the other side and ping any machine in the network.
Here's the issue, I cannot get dhcp to work across the link. I set a static address (dns servers and all) but when I try to ping google i get "Network is Unreachable"
i have a homework where i have to set up a dhcp server on linux. I am using ubuntu. I tried following: [URL] However after running "sudo apt-get install dhcp3-server" the file "/etc/default/dhcp3-server" does not appear.
View 9 Replies View Relatedps3 lan, psp wan, xp desktop lan, netbook W7 wan, fujitsu laptop ubuntu wan for surfing but often lan for large files, android 2.1 phone wan, mac sawtooth G3 (rarley) lan. near future, tablet wan, crappy ancient laptop xp lan rarely.next week i am having 6TB DS211j NAS (omg cant wait)I think, from what i have been reading, that moving to a static ip for each device will be better suited.I manage the belkin router from the ubuntu latop and wondered what the best way to proceed is, which first, what order etc etc.I can understand what needs to be done, i have the primary dns and ip numbers and mac address for every device ( the network is mac filtered)
so how would you begin...... a peice of paper and some drawings i have ready to plan it out.the reason i choose to change from dhcp to static is because of the arrival of the DS112j. from my understanding this device would benefit from never having its ip changed on the network. There have been times when the ip has changed on some of the devices in the past when the belkin has suffered a power failure or reset.
After ubuntu did some updates, I restarted and then no wired connection was detected.The following may partly clarify the problem:
sudo dmesg | grep eth
(I dont get anything for this)
ifconfig
[code]....
Do I undersatnd correct? If you build LAN with several Linux PCs and no DHCP server, you will need to configure every computer yourself. But if you add one more PC to this LAN which is DHCP server, all you need is to configure this DHCP server and write in config files of other computers to use DHCP, network will work without configuring other computers?
View 6 Replies View RelatedI have made a CentOS AMI Image for Amazon EC2 Now the network is starting but it doesnt even try to determine the IP :
Bringing up interface eth0: [ OK ]
BUT if I hit the ifconfig :
eth0 Link encap:Ethernet HWaddr 12:31:39:0A:99:F8
inet6 addr: fe80::1031:39ff:fe0a:99f8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]......