I have a usb 1tb drive that I want to share over my netowork, but when i share it through nautilus, it doesn't mount right on other computers, ect. Is there a way to mount it. The location of the drive is /media/FreeAgent Drive___
View 3 Replies
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
I have a router running IPCOP with a 30 gig drive. I know the OS doesnt need that much space for a router. Can IPCOP mount and share out another partition on the same hard drive its installed on to my windows computers on my network?
View 1 Replies View RelatedI have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
I have two Ubuntu 10.10 computers and two Windows XP computers connected to my network. I cannot share files between the Ubuntu computers using samba. I keep getting the "Unable to Mount Location Failed to mount Windows share" error. I've tried the solutions posted by dmizer here and nothing works.Random true facts:I can successfully connect to folders shared on my Windows XP computers from either windows computer.I can successfully connect to folders shared on my Windows XP computers from either ubuntu computers.Neither of my windows computers cannot connect to folders shared on either ubuntu computer.Neither ubuntu computer can connect to folders shared by the other ubuntu computer.I REALLY need to get samba to work since I have other Windows computers on my network.
View 8 Replies View RelatedI am having a heck of a time trying to find directions on networking my two computers together in order to share files. I have two machines running Ubuntu 10.10 Desktop & Netbook remix.
They are both connected to my wireless router to connect to the internet.
i have two machines both on ubuntu 10.4 connected to a network via port switcher, 2 rj45 network cables auto eth0 is setup to share with other computers, i can ssh in and out of both, so the network is all running but i want to know how to share my single dongle internet connection between the 2 computers
View 4 Replies View Relatedif i have Fedora 13 installed on a desktop and on a laptop, can i organize so that both machines use the same dsl connection? I have an external DSL modem that is currently connected to my PC via an ethernet cable. When I want to use my my laptop I usually unplug the dsl connection from my computer and plug it into my lap top. is there some way i can have it connected to both?
View 9 Replies View RelatedI now have 3 desktop computers hard wired into my wireless router and another desktop plus 2 laptops connecting wireless. All are running Ubuntu 10.4 or 10.10. I have not had the chance to get them all upgraded yet. What is the easiest way to get these computers connected so that they can share files? Do I have to set up a server or is there a simpler way? I just want to be able to copy a file from one computer to another.
View 9 Replies View RelatedAs the Subject mentions I have an Office Jet 5610 All in One Printer that I am trying to share between 3 Computers.
Computer Number 1: Laptop running Fedora 12 with the Gnome desktop. This is the computer to which the printer is physically connected to. I have no issues printing from this printer at the laptop. I have installed both samba and cups. I can access cups online and manage the printer from the Laptop with no issues I have checked to make sure sharing was turned on and in the laptop i have made sure that internet sharing with the printer is turned on.
Computer Number 2: Desktop running Sabayon 5.1 with the Gnome desktop. I can see the printer and it tells me that its ready. I try to print a simple test page and i get error: Destination Printer not accepting Jobs. I'm not sure if this is a Sabayon issue a Cups issue or a Fedora Issue.
Computer Number 3 Desktop running that Redmond Crap (Wifes Computer) Yeah Redmond wont even find the network printer much less print to it.
I forgot to mention that i have checked my firewall to make sure IPP was allowed and Samba was allowed so i do know that these are not the issues. I do have SELInux installed and running though don't know if this could be the culprit or not.
Trying to share my internet connection with other computers on my LAN. I've tried doing this with Debian, Ubuntu & Fedora so far...
My Intended Setup is as follows;
The Problem: So far I've not been able to get an internet connection from any computer connected to the HUB. I currenty have Fedora 13 on PC1 but have also tried with both Ubuntu 10.04 & Debian Lenny. I am open to using any Linux based distro on PC1 as long it has a Gnome Desktop. eth0 on PC1 can be Static or Dhcp, but I would prefer to set Static IPs on eth1 & all of the Client PCs
To the best of my knowledge I have enabled ipv4 forwarding in sysctl.conf (& some other changes);
Code:
All changes I made to the Firewall (all other Firewall settings are still at default, no custom rules added yet);
Router is set up to assign dhcp from 192.168.xxx.100 & 192.168.xxx.200
At the moment I have only 1 PC attached to the HUB. It's Ubuntu 10.04 (PC2)
It's details are;
ip 192.168.xxx.103
netmask255.255.255.0
gateway 192.168.xxx.101
Thus Far I can't ping 192.168.XXX.103 from PC1 & I can't ping 192.168.XXX.101 from PC2. (unreachable) I have an internet connection on PC1 (of course)
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies View RelatedI have a nfs share that does not automount all the time (may be one out of 10 time it automount properly). I basically have the same line in the fstab on my other 2 computers and no problem on these. I suspect that my wireless connection kick in too late (after fstab). Do you see a solution for delaying a few second the automount of the nfs share.
Code:
# Entry for nfs share on 192.168.1.20 :
192.168.1.20:/mnt/sdb5_data5 /mnt/sdb5_data5 nfs user,sync,rsize=8192,wsize=8192,exec,soft 0 0
i'm trying to connect to the three other machines in my house but am having quite a hard time doing so. i've never had a problem in the past with ubuntu, but, with 9.1 and windows 7, things have gotten a bit harder. i'm running 9.1 and my roommates are running windows 7. i've installed, set up and configured samba and i can see the computers on my network, but any time i try to access either of the drives, it says unable to mount location: failed to mount windows share.
View 4 Replies View Relatedi have a ubuntu 10.10 desktop and laptop. i installed samba, and smbfs. i shared a folder on each computer. when i browse the network i can see the laptop from the laptop, and can see the desktop from the laptop, but i cant see the laptop from the desktop. when i try to mount the share it says unable to mount, but mounts it anyway...but, i need to be able to mount it so that rsync will see the shares as a dir on the desktop. i tried manually mounting via smbmount following several threads that i found, and i keep getting error sudo smbmount //192.168.1.78/share /media/laptop Password: Unable to find suitable address
that is as far as i've been able to get. i've looked and have only been able to find threads about windows shares, not between 2 ubuntu machines. and i dont know why laptop can see the desktop but not the other way around. they have identical smb.conf files
My friend gave me a usb drive which doesn't mount. When I plugged it in, I got this on dmesg:
[Code]....
The usb drive is supposed to be on /dev/sdb, however when I try to read /dev/sdb with head, I get: head: cannot open `/dev/sdb' for reading: No medium found I cannot get it to work with fdisk, gparted, mount, and all I can get is No medium found. I am ready to call this drive dead.
I am at a university where my bandwidth is severely capped. I can start several other computers near me and download at the limited speed simultaneously. Is there any way for me to share the download between the computers to get the cumulative speed?
View 1 Replies View RelatedI have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View Relatedi bought i 32gb transcend flashdrive mainly to t0 another os.. but the problem is it doesnt mount in ubuntu 10.10 but is mounts in windows. when i type lsusb in my terminal after inserting ang again after removing it i see that there is one usb device which is shown when flash drive is inserted and dissapears when i remove my flash drive
View 9 Replies View RelatedThe other day a power outage affected an SSH server I have running 9.04 (32-bit desktop ed.). I have two external USB hard drives used for cron-scheduled backups (one for rsync, one for an incremental) that are connected at all times. When I reboot, they no longer mount automatically until I login to the gnome desktop. As far as I can remember, they always mounted automatically before as disk-1 and disk-2, but now I have to login to the gnome desktop and then log back out.
I never had them listed in the fstab before since they just worked, & hope to avoid doing it this way since the drives sometimes get their paths (sdd and sde) interchanged. However, is the best way to fix this to use UUIDs in fstab vs. using sde or sdd? (such as in this post: 4highlight=external+hard+drives+don't+mount+boot Or maybeust remembering incorrectly & ubuntu doesn't mount them automatically until login? Sometimes I have to reboot remotely, & this problem would cause the rsync to fill up my system drive.
im trying to get a network setup i followed the instruction via gentoo wiki samba what i have done
[Code]...
then i did chmod 777 to the shared folders on both machines went into nautilus it sees the folder but it will not mount the folder showing the error msg:"unable to mount location failed to mount windows share" ive been searching unbuntu forums opensuseforums and google for an answer to this issue but as of right now anything that i have tried to do has failed and nothing seems to be working.
I'm using Unix services for windows on a windows system and shared a few folders using it; now how can I mount it on Linux?
There's no way you can search for this question online. These search terms -
"mount windows NFS share linux"
Also mean -
"mount linux NFS share windows"
and -
"mount share windows linux NFS"
Which actually means NFS 4 which supports SMB protocol.
So actually it's IMPOSSIBLE to search for this and so this will be a good sticky.
I'm trying to mount a windows share (that mac users use) using:mount -t cifs //x.x.x.x/Graphics /mnt/graphics -o username=x,password=x,iocharset=utf8.It mounts ok for the most part, but where the mac users put bullets in front of their file names, ubuntu displays questions marks. I've tried this without the iocharset as well and same result when I execute ll -l.
View 1 Replies View Relatedused to work perfectly with my password being memorised and all, I would click on network, select the desired pc and access my shares on the network perdectly. As far as I can say nothing has changed, same username and password and workgroup, however when I now select the computer I desired to connect in Nautilus it ask for my password and username (which I know), but it doesn't connect, it continually ask for it.
The weirdest part (which make me believe the problem comes from my machine) is I can mount the network drive using "mount -t smbfs", with my usual login details Why has the graphical nautilus interface stopped working?
in a nutshell im trying to share 2 HDD's in same machine with several windows machines1. auto login so no welcome screen.2. auto mount the drives3. share the drives with/without password 1 is fine, i did resolve issue 2 with "storage device manager" but no matter what i do i cant get it to load correctly as i cant remove the option "mount file system in read only mode" so i cant create/move/delete anything. i did also change the owner for when it mounts off root to my user, but still no avail.and i can share the drives using ubuntu, but i also have samba.not important
Code:also another 2 Q's for after i have sorted this, i need ubuntu to shut down when i simplypress the off button as this will have no mouse, keyboard or TFT attached.so then i can simply press the on button and within a min or so i can just connect to my 'network drives' and then also to enable a remote desktop viewer, i did try the inbuilt 1 but couldnt connect with my win 7 machines
Im trying to set up a share between my 2 ubuntu computers. I set one computer to share a folder in the properties tab, and installed the corresponding software. now, how do I search my local network for shares?hat type of share is it? NFS? Is there a tutorial out there some place?
View 1 Replies View RelatedI have a hard time mounting two external drives on my Suse 11.3. When I use the device notifier gadget both drives get mounted in /media/<drive name>, the vfat drive is read-only though. However, I would like to mount both drives under /<drive name> in separate directories and rw. I looked at the devices in /dev/ and entered the device name to fstab, set the mount point, file system (vfat, and ntfs-3g) and set 'rw,noauto,exec,user,sync 0 0'.
This way I could mount my vfat drive read-only under /<drive name>, but not the ntfs one. After a reboot i noticed that the external drives get different IDs in /dev. E.g. what I had in my fstab under /dev/sdc1 got /dev/sdf1, and /dev/sdc was unknown. I am doing something wrong here, what worked in 11.0 does not seem to work here.
[code]...
I recently upgraded to Gnome 2.30 and now usb drives don't auto-mount and show-up in Nautilus as a device.
I can mount the drive manually, but it would be nice if this happened automatically when I plugged it in.
I used a live CD burned onto a DVD-RW and it booted up and worked great. So I installed it using the entire hard drive, Ran Update manager, enabled the driver for the wifi card. Before I was using 10.5 with all recent updates done. A few things don't work. It fails whenever I try to connect my Bluetooth mouse and keyboard, CD drive doesn't mount anything, I thought it would bring up the restricted nvidia driver but it doesn't so the video is slow and sketchy.
View 7 Replies View RelatedCan I share an NFS mount with samba?
Scenario:
ServerA has an NFS Mount to ServerB at mount point /home/qlogger/logs
I can cd to /home/qlogger/logs on ServerA and see the contents as they would be on ServerB (NFS Working with proper permissions rw).
I have a samba share setup on ServerA to share the NFS Mounted Directory (/home/qlogger/logs)
I connect with my windows host and am able to view the files and folders. I can create folders just fine however; when I go to copy a file from the windows machine to the samba share I receive a message saying the file is locked.
I have disabled oplocks in samba and the problem still persists.
