Ubuntu Networking :: Can't Connect To Ethernet Or Wireless
Jul 14, 2010
I have a Toshiba Satellite L645D-S4030 running on Ubuntu 10.04. When I plug an ethernet cable into the ethernet port, simply nothing happens, and when I try to connect to my wireless network, it connects but there is no actual internet available. I'm sure the wireless works as I'm on an older model Toshiba Satellite and it connects fine (running Ubuntu 10.04 as well.) I tried to follow the procedure in the stickied thread, so when I type in these commands, here's what shows up:
Lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
[code].....
View 9 Replies
ADVERTISEMENT
Jul 28, 2011
I have recently installed ubuntu 11.04 on my asus eeepc1005hab. And I've had problems with the wifi. I can connect via ethernet, but the wireless won't connect. I can see the connection, but my wifi never connects. I've tried many things but it still won't work.
View 9 Replies
View Related
Jul 22, 2010
I have a wireless Internet modem (USB) and a LAN Ethernet connection. I can only pick 1 of them to connect to (by disconnecting the other). How can I connect to both at the same time?
View 6 Replies
View Related
Feb 13, 2011
When I select the wifi icon on the panel, it just shows "No network devices available". I know my network can be found when I search with my iPhone, so I know there are networks to connect to. So, I checked the drivers, and it informs me that the B43 and STA drivers are not activated. So thats not a big deal, I guess, but when I use my ethernet cord, my laptop doesn't recognize/acknowledge (I'm not sure what the right term would be)it. I'm fairly sure I can't activate these drivers without an internet connection because when I do try, a message pops up saying "failed to fetch" with some long link.
My only guess is that it could be a hardware problem, but I really have no idea. I guess the ethernet problem is my only real problem. Because after I establish and internet connection the the rest is easy to fix.I'm sure its obvious, but I'll go ahead say that I'm a novice ubuntu user. I've only been working with it for about a week, but I'm learning alot.
View 9 Replies
View Related
Sep 14, 2010
I have a Dell Inspiron 1545 with a Dell Wireless 1397 WLAN Mini-Card and a Marvell Yukon 88e8040 PCI-E Fast Ethernet Controller, and I cannot for the life of me get the internet to connect. I've tried both wired and wireless connection. I have a PPoE connection through a Verizon FIOS Actiontek router I believe, though the PPoE part may be wrong, I had one five years ago when I first got their internet so they may have changed it. Point is that the ethernet and internet won't work, and without a working ethernet I can't fetch the right drivers for anything.
I had also tried plain ubuntu 10.04 and couldn't get them to work then either. It said 'disconnected' at first, and then said 'device not ready' There is no hardware switch but there is a key toggle. It doesn't seem to matter what state the wireless was in before booting into Ubuntu Studio, so I'm lost as to where to even start. Even though the network manager isn't there like in regular ubuntu, I assume there will be a simple way to connect to the internet once the drivers are found, right?
I've seen issues and read about fixing them, but usually it uses an ethernet connection to fix the wifi connection and, being new to linux (<50 hours worth of experience lifetime), all I managed to do trying to fix it myself was screw up the installation to the point where the laptop couldn't access the home folder and I had to reinstall. Other than that, I am usually very good at following instructions, as long as they apply to my laptop's issue I guess
The only other issue is minor, I can't seem to control the USB mouse I have, but the trackpad works fine so it's no big deal, probably a matter of downloading the mouse driver once the internet works.
Currently I do have internet access via the same laptop while booting Windows 7 (I installed Ubuntu Studio 10.04 on a 10GB Partition with the idea of using an external HD for most data storage).
Oh and it is a 64-bit machine, the Studio version I installed is 32-bit.
View 3 Replies
View Related
Sep 1, 2011
My laptop was working fine on wireless till the userinterface changed and it defaulted to ethernet and now it won't let me go back on wireless How do i disable ethernet?
View 4 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Jan 18, 2011
Everything look great but I don't get how to connect to ethernet connection or how to turn on wireless. I always had automatic connection on ubuntu since 8.04. For now I'll look for some repository and download the "nt" applet manager.
View 3 Replies
View Related
Apr 7, 2011
there are two computer
wireless internet accessible notebook.
desktop with no wireless card (but just normal lan card).
I connect two computer with lan cable, and I want to use internet in desktop computer through the notebook's wireless lan
what kind of setting do I have to do?
desktop's OS is Ubuntu, and notebook's one are Ubuntu, Windows XP.
View 1 Replies
View Related
Mar 2, 2011
Just today I installed opensuse 11.3 on my Compaq CQ61. Even though I am able to connect to networks (both with an ethernet cable and wireless) I don't have internet access. I have used opensuse for a very brief period in the past and I had no such problem.
View 3 Replies
View Related
Apr 1, 2011
I have a dual boot netbook (Acer Aspire One D255) with Mint and Ubuntu 10.4. Using Mint, I was able to connect via the ethernet and install all updates including wireless driver.
In Ubuntu 10.4, regardless of what I do, I cannot connect via ethernet cable at home and at work.
How can I locate the right wireless driver? In the past, I have always been able to simply plug in the ethernet cable and get the necessary updates.
View 9 Replies
View Related
Oct 22, 2010
I recently moved to a student dorm in my university (RWTH Aachen) and I have an ethernet connection from my room. The thing is that I can't connect to the internet, I don't get any IP through DHCP. I tried using wicd instead of network-manager, and doing it manually with dhclient. None of those worked (actually I don't know much about how networking works so maybe I didn't do it well with dhclient). The weird thing is that Windows 7 gets the IP instantly and I can connect to the internet from windows. But I don't know why Ubuntu refuses to get an IP. Info from lshw, lspci:
lspci
Code:
sudo lspci -vv
02:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 4380 (rev 10)
Subsystem: Sony Corporation Device 905e
[Code].....
View 9 Replies
View Related
Jun 22, 2011
I had this sticky problem with b43 drivers. Unfortunately, on my Acer Extensa 5620z I'm not even able to connect via ethernet, so I can't download upgrades, driver or whatever. This was initially with 11.04, so I've decided to get back to 10.04, but the problem persists. Then, here we go with details:
networking checked - is enabled.
Ip configuration (I've got static local address) - is ok.
Ifconfig - recognizes eth0.
Iwconfig - recognizes wlan0.
Ping - 100% packet loss, always.
dig - goes on timeout.
netstat -an - doesn't show any connection with external address.
View 2 Replies
View Related
May 6, 2010
I own a D-Link DI-604 wired router and I've started getting some issues after Ubuntu 9.10 to 10.04 upgrade(Ubuntu 9.04 used to work OK!). The problem is that Ubuntu recognizes all my ethernet cards (see below), but I can only connect to the internet through eth1 not eth0 (which is my Windows default). If I try to plug the cable in eth0 nothing happens (at least not in Ubuntu 10.04 and 9.10).
Code:
lucas@lucas-desktop:~$ sudo lshw -C network
[sudo] password for lucas:
*-network:0
description: Ethernet interface
[code].....
View 9 Replies
View Related
Jun 30, 2010
I cannot connect to my Ubuntu Server. Currently I'm trying via my MacBook through ethernet. A physical connection is apparent; however, the computers cannot communicate. To resolve this problem is important because I just need basic SSH functionality. While connected through ethernet, my MacBook cannot ping my Ubuntu box. Here is a screen shot of the Mac's network setup, a ping attempt, the ifconfig's of both machines.
[Code]...
View 9 Replies
View Related
Aug 8, 2010
I wanted to test 10.04 and downloaded Wubi to do so. Normal setup, it automatically picked the 64-bit version. After booting into Wubi, installing my ATI drivers and restarting it did no longer connect to my ethernet. A few reboots didn't help so I went back to Windows for troubleshooting.
However now Windows doesn't connect to the ethernet either. It's plain dead, Windows doesn't find any connections and the modem doesn't light the Ethernet cable LED. The modem itself works fine with wireless devices. I have now tried everything including uninstalling Ubuntu, system restore, driver rollback, driver update, BIOS default settings, a different cable, a different modem etc.
This is a 64-bit specific issue because I tested the 32-bit version of Wubi 10.04 a few months ago without problems.
Windows 7 x64
Wubi 10.04 x64
Gigabyte P55-UD3 with onboard Realtek RTL8111D LAN.
I'd like to get out of this without Ubuntu effectively having broken my hardware and my trust in it.
View 9 Replies
View Related
Aug 17, 2010
My laptop was on windows xp and when I installed ubuntu linux my NIC Card driver was gone (I think) and now I can't connect to the internet using an ethernet. I have the driver on the desktop of my Linux laptop but I don't know how to add it using terminal or any other options.
View 1 Replies
View Related
Jul 13, 2011
I am using Ubuntu Server version 10.4, and am trying to connect to the internet via an ethernet cable. This may and probably is incredibly simple, however, I could not find anything that pertains to it.
View 9 Replies
View Related
Mar 4, 2011
Just installed Scientific Linux 6. Does anyone know how to get it to connect to wired ethernet network?
View 3 Replies
View Related
Feb 15, 2010
My ISP finished some 'upgrades' on its infrastructure. The result is that I am having great difficulty in connecting to the internet.
I have 3 operating systems on my box - XP, Fedora 8 and Feota 12.
I connect using an ethernet card, using dhcp. In fedora 12, the ethernet card is controlled be networkmanager. After the ISP completed their upgrades, I was not able to connect. I tried to connect manually using
Code:
There was an error message -
Code:
I read the advice here: [url], and removed all but the important lines.
But even after that neither ifup eth0 or dhclient eth0 works.
In fedora 8, the ethernet card is activated by ifup eth0 in /etc/rc.local. I was able to connect on a couple of occasions, but that too stopped working. I tried both ifup eth0, dhclient eth0, and tried to use the gui( which fires the dhclient command), but none worked.
When I use windows, it takes about 2 minutes to get an ip (earlier it was immediate). Sometimes that doesnt work and I have to click on "repair" whereupon it starts working.
View 1 Replies
View Related
Dec 2, 2010
I run Ubuntu 10.04 on a PackardBell laptop, with an Orange Livebox 2 providing ADSL. I am connected to the Livebox via WiFi, but I can't connect using the ethernet cable. I think that in making changes to the system some time ago I must have ruined something, but I can't work out what.
View 8 Replies
View Related
May 4, 2011
I am using a cable modem wired to my PC via ethernet. My ISP is Road Runner, through Time Warner Cable.
I entered my IP address, Netmask, and DNS Servers into the network, not using DHCP. This was how I was able to achieve a network connection.
I am connected to the modem, but I cannot get internet.
Here are my stats:
View 7 Replies
View Related
Oct 17, 2010
I have been using Ubuntu for quite a while now (~3 years.) I recently installed 10.10 on an HP Mini 1000. The installation went fine, but now I am puzzling over how to connect to the internet. When I plug an ethernet cable into the netbook, the port light lights up, but the system does absolutely nothing. Under the connections menu on the top panel, it just says disconnected. Also, the wireless connection section states that the device is not ready because firmware is not installed. Most solutions I see for problems of this kind are to download the drivers, but I cannot do that because neither connection works.
View 1 Replies
View Related
Jul 13, 2011
i'm a beginner with ubuntu and i installed 11.04 yesterday (so not yet familiar with the new desktop configuration). Also, I have the french version so i'll do my best to translate the terms in english. I have a major problem: i can't connect to internet by ethernet cable or by wireless. The network icon is always empty. It doesn't detect the ethernet cable and the wireless networks around. I've tried different things i found on forums. I'v reinstalled the b43 package and rebooted. At the beginning i was only having problem with the wireless; i could connect via ethernet. But on one forum, a dude suggested the command
[Code]...
View 3 Replies
View Related
May 3, 2010
I just upgraded to 10.04. I had wireless connection for 1 day and now nothing. No ethernet connection either. I CAN use both wireless and ethernet using my machine on Windows.....so the connection stuff does work. Here's the output of of the commands I got from the "sticky". I can't display the output as this forum puts it all together as one continuous sentence with no line break!
View 9 Replies
View Related
Sep 11, 2010
I am trying to get this laptop`s wireless to connect to my router or any wireless connection. It does not have an ethernet port,so it has been tough.I have been reading everything i can,but cant get it to work.Maybe I need a different wireless card or a usb adapter.The one I have is a Texas Intruments acx100.Can anyone tell me if this should work.I have ndiswrapper installed and the windows driver for it but still nothing.
View 4 Replies
View Related
Dec 12, 2010
I have 2 LAN ports. one from the motherboard (on board) and the other from a lan card i bought a few days back. one is use for browsing the net, the other for a media player.
problem is i cant connect to both the eth0 and eth1 at the same time. i have to disconnect one of them to connect to the other. and this really gets irritating as it doesnt always work as flawlessly as it should. what am i doing wrong?
Output of "ifconfig":
Quote:
I'm on ubuntu desktop 10.10 64 bit.
View 8 Replies
View Related
Nov 13, 2010
I've recently bought a recycled computer for my office. The plan was to get an old cheap computer and use it to write LaTex documents but nothing else. However, I can't seem to get the thing to connect to the internet. I'm on a University network which has a funny setup but I don't think that's the problem.So here's the deal. I have tried this with 9.04, 10.04 and 10.10 and it hasn't worked. The computer recognizes the ethernet cable. If I issue the command "sudo mii-tool eth0" and get back "eth0: negotiated 100baseTx-FD, link ok". However, click on the networking logo on the top right, and click auto eth0, it tries to connect for about 30 seconds, then gives up. Unfortunately I'm pretty clueless when it comes to networking so I have no idea what to do to try to fix this.
View 8 Replies
View Related
Dec 5, 2010
I have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
View 9 Replies
View Related
Jun 4, 2011
have used f14 since it came out with no problems, little niggles and whatnot have been sorted by reading these forums and googling but I'm now out of my depth.problems started when I installed f15 from disc and no ethernet or wireless was useable. Inserting wire leads to it announcing it's unplugged again a few mins later and trying to connect wireless never resolves.I thought it was a quirk and would go back to f14 for a few weeks but after re-installing that was now the same. So I tried live discs of crunchbang and debian6 -same. However puppy linux sees the ethernet fine.So my question is how do I enable ethernet and/or wireless in f15 (installed again after checking with puppy)?
View 8 Replies
View Related
