I have Huawei B970b (see specs). It a router with wireless and GSM capability. It works ok in XP. I can connect and ping its IP 192.168.1.1. In Ubuntu I can see the wireless SSID and could connect to the router but I can not surf the net nor I can ping 192.168.1.1.
View 1 RepliesI am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
I tried this :
Quote:
ssh -ND 9999 username@home_router_ip_address
and this is output :
�nani@jebe-kevu-ovaj-PC:~$ ssh -ND 999 nani@nani.homelinux.com
Privileged ports can only be forwarded by root.
nani@jebe-kevu-ovaj-PC:~$ sudo ssh -ND 999 nani@nani.homelinux.com
[code]....
which password is he looking for exacly ? user nani is main user at ubuntu after he asked me for password i typed my nani user password and i got in , after how you can see he ask me for onather password i tried the nani�s password but nothing is heppening ?
It worked in 10.04 using ndiswrapper, but the connection was very weak (In Windows, it works perfectly). I blame ndiswrapper and the windows driver for the connection issues.In 10.10 x64, using ndiswrapper does not work. It says hardware present, but iwconfig shows no wlan0 adapter. I downloaded the driver from RealTek's website (rtl8192su) and compiled it. It gave a lot of warnings about integers being out of range, but I ignored them and went on anyway. If you want the exact warnings, I can put them on a pastebin and post the link tonight when I get home from work.
After doing a make install, I plugged in my adapter. As soon as it kicked on, the light on the adapter would blink and the screen would go black with a lone cursor in the top left corner of the screen. The drivers are obviously suspect, since I can make uninstall, plug in the adapter, and continue on with no network.Has anyone gotten this adapter/other adapters with the rtl8192su firmware working in 10.10 using a stock x64 install? It has to be stock or using packages available on the disk since without using the adapter, I have no internet.Maybe I'll try the drivers on 10.04 and see if they're just not compatible with 10.10.
how i can use my nokia E52 as a modem in ubuntu 10.10 to surf net in windows i use nokia pc suite and connect my phone by usb cable and connect
View 9 Replies View RelatedA few days ago I decided to do a clean install of 11.04 (which I was running when I followed this thread [URL], which solved my problem of my wifi not being able to surf the web or download anything, even though it said i was connected). After the install i noticed that my wifi was acting up and I realized I had to install the realtek driver again, like I did the first time. I followed the thread I stated above again the exact same as I did the first time when it worked for me, now when I boot up I get stuck after the grub menu, it goes to a black screen and I cannot get off of it. I reinstalled ubuntu 11.04 and everything was fine, then I compiled the realtk driver again and the same thing happened. Kernel version 3.6.38-10 Generic (I think this has something to do with the black screen after the Grub menu).
View 3 Replies View RelatedI have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
You'll need to reply like I'm an absolute idiot. I cannot get the stupid thing to work. WINE won't install, and I'm really confused on how to make it work. If anyone could please give me a step-by-step, that would be great.
View 1 Replies View RelatedIve got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
i have ubuntu 9.10 on a lenovo s10. i had my alfa awus036h and it worked fine no issues. except for having to reconnect every hour or so. anyway i got back track 4 final and installed it on usb with unetbootin. i started to use wicd and etter cap on it. and i made sure to turn off wicd when i was done then i went back into ubuntu (i didnt install bt) and i started to have problems like everyone else. slow connections ,disconnects after 1 min, and can still connect to networks but cant surf.
View 1 Replies View RelatedI have Dlink Wireless G Access Point.
I can connect to my access point to surf internet. I setup my Dlink access point (password, network name, etc) in Vista by visiting "http://dlinkap/" in my web browser.
In ubuntu, I can connect and surf the web/internet but i cannot access the setup page.
When I try to type the "http://dlinkap/" to my browser then the browser will redirect it to google search.
I try 192.168.1.1, I can access my linksys router. but my dlink access point, i cannot access the setup page.
When I activate eth0, the system says that the eth0 seems not exist. However, I can surf in the internet.
View 1 Replies View RelatedI have two network cards in my computer (Debian). One (eth0) is connected to the router which is connected to the internet, the other one (eth1) is connected to my laptop (Gentoo). Now I want to surf the web both on my computer and on my laptop. I obeyed some tutorials "Linux as router":
1. On my Debian system IP-Forwarding is on:
Code:
takada:/home/sam# sysctl net.ipv4.ip_forward
net.ipv4.ip_forward = 1
2. Laptop has IP 192.168.0.2 and this is the output of 'cat /etc/network/interfaces' on my computer:
Code:
takada:/etc/network# cat interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
But a ping from my laptop to 192.168.1.1 (router to internet) still gives:
Code:
connect: Network is unreachable
I installl centos in my pc after i install, i cant surf the net,showing no devices for network
View 1 Replies View RelatedI just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies View RelatedI have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
I have just installed Ubuntu 10.10 on a pc as a duel boot, On the computer I use a belkin surf and share n speed controller to connect wireless ( pc doesn't have a wireless connection) I have found the correct driver RLT8192SU from realtek and unzipped it and moved the contents to a flash drive. The problem is I am a total noob to Linux based systems and i have no ideal how to install the contents, there is a read me file but it makes no sense to me and i have absolutely no clue how to install the driver so i have no internet. Is there an easier way to install or step by step instructions?
View 6 Replies View RelatedI have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
I try to ping with php : exec("ping -n 1 $ip",$output[],$retval); it works fine in window. but in linux i got this error : ping: icmp open socket: Operation not permitted are there any ways to solve this ?
View 5 Replies View RelatedHost - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
I can connect to the internet and browse. I'm wired and using DHCP on a Windows network. Updating Ubuntu or downloading programs takes hours for 52MB of updates. Why? I read some articles that mention Network Manager needs to be enabled at the .conf file. Can I edit this using GUI or command line only?
View 9 Replies View RelatedWhen i ping www.google.es, i get something like:Quote:
ping www.google.es
(wait 20 seconds)
64 bytes from 66.249.92.104: icmp_seq=2 ttl:53 time=80 ms
[code].....
As the thread title suggests i want to know how to surf anonymously as can be. Im thinking of using a vpn provider over the isp provider and while using a vpn connecting to the tor network using firefox.
View 9 Replies View RelatedThis applies to my 2 opensuse PC's, my Windows PC is fine.I can ping a hostname, say "PC1" but I can not ping PC1.domain.local (even the host PC can not ping it's own FQDN). When I ping just the hostname the ping stats even list the FQDN.Onto the next issue, since all my PC's, have the domain prefix domain.local, my Synology can not. I can ping it's IP and that is it. I can resolve it's name with nmblookup just fine tho and that is what is killing me. How is this not resolving.Even weirder, I can browse to "Synology" in Network Servers under places on the slab.
View 3 Replies View RelatedEven ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
i use slackware 2 months ago.13.1 at start and now 13.37.today i finaly enjoy the wireless conection with "wicd".i want to know how safe is to surf with this OS.
View 4 Replies View RelatedI am trying to get a Linux (Slackware 13.37) working in a Windows networking environment. The IT support for this organisation does not extend to Linux support, so I'm limited in what help I can get for this.
I'm trying to get to the point where I can get to the internet to download what I need on this Linux machine.
The situation is this (*fictitious addresses used) -My Linux machine uses a fixed IP address (10.100.150.21)
My Windows machine uses a DHCP assigned IP address (10.100.150.213)Both Linux and Windows machine are configured to access the gateway server (10.100.150.1)So, I can ping the Linux machine from the Windows machine and vice-versa.I can ping the gateway machine from the Windows machine.I can browse Windows Shares on the network via SMB from the Linux machine.I CANNOT ping the gateway machine from the Linux machine with the Destination Host Unreachable message being the error message.
For actual internet access I need to access a proxy server but since the Linux machine can't even ping the gateway server, it fails to ping the proxy.Now, I have been told the gateway is a HW based router and for Windows machine they use some software for authentication to connect to the network. This software isn't available for Linux, so that's why I've been told to use a fixed IP address.My experience of networking is pretty basic and most of the Linux setup is done via running Slackware's setup program.
I have three pc's in the house, one desktop and three laptops. the two windows pc's (windoze 7) worked with dsl and firefox just fine. my linux debian laptop DID give me a network connection, i can log in as admin and change the router/modem ect with no prob. i cant get the default browser in debian to load a page. iceweasel says cant resolve the host name. i have WOW and secondlife installed and both games work fine. i can get a connection on the wireless and play them with no prob. I cant surf the web with any default browser in debian. i have a internet connection. i just cant surf so its got to be in the web browser settings? i looked, did not change anything, but do not see what could be causing this.
View 10 Replies View RelatedI'm in troubles with the OpenVPN, I've seen tons of tutorials on the Internet of how to setup it, but failed at last... If somebody could help me a little, I'll really appreciate that.The problem is, I can connect to VPN server, passed the authorization, but I can't surf the Internet through the OpenVPN server...
View 1 Replies View Related