Fedora Networking :: Can't Activate Eth0 But Can Surf In Internet
Oct 24, 2009When I activate eth0, the system says that the eth0 seems not exist. However, I can surf in the internet.
View 1 RepliesWhen I activate eth0, the system says that the eth0 seems not exist. However, I can surf in the internet.
View 1 RepliesI am unable to connect to the internet in fedora (XP connects fine) I normally use wifi, but have also checked the wired connection.
View 10 Replies View RelatedCode...
connection is set to connect automatically using dhcp... used to work, after a latest updates basically stopped working.
how can i activate eth0 on terminal ?
View 1 Replies View RelatedI'm in troubles with the OpenVPN, I've seen tons of tutorials on the Internet of how to setup it, but failed at last... If somebody could help me a little, I'll really appreciate that.The problem is, I can connect to VPN server, passed the authorization, but I can't surf the Internet through the OpenVPN server...
View 1 Replies View RelatedI have Dlink Wireless G Access Point.
I can connect to my access point to surf internet. I setup my Dlink access point (password, network name, etc) in Vista by visiting "http://dlinkap/" in my web browser.
In ubuntu, I can connect and surf the web/internet but i cannot access the setup page.
When I try to type the "http://dlinkap/" to my browser then the browser will redirect it to google search.
I try 192.168.1.1, I can access my linksys router. but my dlink access point, i cannot access the setup page.
When i wan to activate device in network configuration, it pop out with "CANNOT ACTIVATE NETWORK DEVICE ETH0". There is a sentence after this also : "rlt8129 device eth0 does not seem to be present, delaying initialization."
View 14 Replies View RelatedI use Fedora 12 and I use Mobile Boradband to connect to the Internet on my laptop. I want to setup a wireless network using my laptop so that my roommate who uses Vista, can surf internet on his laptop. How can I do it?
View 1 Replies View RelatedThe problem I'm having is on a CentOS4 machine. I don't use CentOS regularly (Ubuntu and Mint, yes) so I'm not sure if this is something that is particular to CentOS or not. I have this workstation that controls a microscope controller. The drives in this computer are some POS Seagate drives where the data storage drive has already conked out more than once. I think this time there was a problem with the OS drive that caused a lot of filesystem errors. I wasn't able to boot the OS at first but I ran fsck from a liveCD and was able to fix the (hundreds of) errors and the OS can now boot from the drive. The problem ave now is the ethernet does not work. I know there's not a problem with the ethernet controllers because I can access the internet through the liveCD. When I try to activate eth0, or eth1, I get the following error:Quote:
Cannot activate network device eth0!
network-functions: line 180: ip: command not found
WARNING: /lib/modules/2.6.9-89.0.9.ELsmp/modules.symbols line 1: ignoring bad line starting with 'GROUP'
[code]...
If i want to use an external usb modem by which i can surf through the net, is this possible in fedora. Because the software is always an .exe file which is only compatible with wndows. let me know if i can use and also let me know the procedure for using this
View 1 Replies View RelatedI am running fedora vm under XP host and using NAT connection to the Internet. It usually works fine, but some time the connection is just lost. I went menu System->Admin->Network and see the interface eth0, but I cannot activate or deactivate. The status is inactive. (when the connect works, the status is active). so I try "ifdown eth0" and "ifup eth0" command, and got
"Error: Connection activation failed: Device not managed by NetowrkManger
The menu System->Admin->Network device control show no interface.
I am not sure what happened.
So, is it possible to set mobile internet as eth0? the reason for this is that etherape and wireshark wont recognize/work with my mobile internet.
View 3 Replies View RelatedI am having broadband connection, I need to connect broadband internet through eth0. Please give me some use full information for configuring this.
View 6 Replies View Relatedi was using ubuntu 9.10 till recently when i decided to upgrade to ubuntu lucid 10.04. turns out the internet icon shows connected after fresh installation but when i try to use firefox , after an long wait it shows server not found. i did a research of my own and found that i am not able to ping even my router.using sudo dhclient eth0 doesn't recieve offers , but surprisingly when i tried dhclient eth0 in root shell with networking internet got configured very quickly and i can ping the router and any website.i forgot to mention i have a wired connection which i am trying to connect and the net is working fine with windows 7 on the same PC.
View 2 Replies View RelatedI have two connections for my PC, my Ethernet which is on the corporate network and my smart phone on 'usb0'. Both have full internet access.I want to stop my PC from connecting to the internet over the Eth0 while still connecting to internal servers then just have internet over usb0.If I go to the settings of 'Auth Ethernet' in the tray area, under IPv4 there is the routings section - I've tried enabling "use this connection only for resources on its network" but it doesnt work.
View 3 Replies View Relatedmy internet was fine.. until.. i had to work in the school so.. a teacher configured the internet settings.. for something .. ( i don't remember) and everything was fine. but when i returned to my house and conected my lap to internet (cable) the internet didn't work.
ubuntu@VR:/etc/network$ ifconfig
eth0 Link encap:Ethernet direcci�nHW 00:1d:72:46:38:3c
Direc. inet:192.168.1.65 Difus.:192.168.1.255 M�sc:255.255.255.0
Direcci�n inet6: fe80::21d:72ff:fe46:383c/64 Alcance:Enlace
[Code].....
im a linux noob dont get techy ill die of brain fry im running a craft bukkit minecraft server on my 11.04 ubuntu server. however the server uses my only 10m Ethernet cable that i normaly use for my ps3 (i will NOT go wireless. i hate it (or dont like it)) therefor i found an old PCI NIC in an old computer, its a 10/100 realtek one. ifconfig detects it (after two commands:
Code:
ifconfig eth0 up
dhclient eth0
)
now i need to send the internet to my ps3 too.i know the connection wont be blazing fast but isnt it okay?it musnt interrupt the minecraft server. if you need info just ask. ill try and provide them.
Since I have a new internetaccount, 2 days ago, I have a problem on my server [Fedora Core 8]. I use it as a router.
eth0 is for the internet.
eth1 is for my LAN.
But since my new internetaccount my server uses eth1 for the internet. This is a line from my syslog:
Code:
NetworkManager: <info> Policy set 'System eth1' (eth1) as default for routing and DNS. I killed the NetworkManager daemon and now it works but this must not be the way to do it? Where do I tell my server that I use eth0 for routing and DNS?
i want to share the internet connection from Laptop to PC via LAN crossover cable
here's how i connect to the internet in laptop, and connected PC via LAN:
i need to share pppoe(ppp0) to (eth0) , that is what i've been doing in Windows before, but i dont know how to share in Linux, i tried to follow Ubuntu Help about ICS, but it doesn't work
My machine has Ubuntu 10.4, installed a week ago. I'm connecting to the Internet with a Wireless 3G modem, the interface is named ppp0. Additionally, I have a network card that is connected to a home router, that's eth0. Everything works fine with eth0 disabled, all my apps can access the internet correctly. But, my issue is that when i enable eth0, i can't access the internet with any app.
So why do i need eth0 anyway? The thing is that i must share my internet connection with my sister, who is also connected to our home router. I planned to give her access by installing squid on this machine and configuring her browser to connect to squid. However, since none of my apps can connect to the internet while eth0 is active (whereas squid and all other apps work fine with eth0 disabled) I can't let her connect to squid while squid is working correctly.BTW selecting "use this connection only for resources on its network" under "routes..." of the ipv4 tab of "Auto Ethernet" made it a little better. Firefox and Xchat started to work with eth0 active. Squid still doesn't work though (althought it works just fine with eth0 disabled)
I've got access to my LAN and the Internet via my wired ethernet connection. I'd like to share that access with my iPod Touch (device shouldn't really matter) via an Ad-hoc wi-fi network.
This tutorial in the docs seems to describe the right setup but is very out of date (7.04). Instead I found this tutorial and followed it to create the Ad-hoc wireless network. I was able to connect my touch to the resulting ad-hoc network without a problem, but I didn't have LAN/Internet access.What's the next step to get the clients on the ad-hoc network out to the Internet?I found this page in the docs that says I'd need to install dnsmasq-base and uninstalling dnsmasq. I checked and dnsmasq-base is already installed but dnsmasq is not. I do have dnsmasq in /usr/sbin but the package description makes it sound like this should come with dnsmasq. Is the page out of date? Will uninstalling dnsmasq cause other problems?
I am running the latest ubuntu and I am having trouble getting networking sorted. I have 2 networks, one wired (eth0) and one wireless (wlan0). I connect to the internet using wireless. The problem is that I can only successfully connect to the internet if I disconnect from eth0. I have hit this problem with Windows machines and the solution was to adjust the "interface metric" in "Advanced TCP/IP Settings" so that the wireless was the preferred connection. How can I achieve something similar in Ubuntu?
View 1 Replies View RelatedI have Huawei B970b (see specs). It a router with wireless and GSM capability. It works ok in XP. I can connect and ping its IP 192.168.1.1. In Ubuntu I can see the wireless SSID and could connect to the router but I can not surf the net nor I can ping 192.168.1.1.
View 1 Replies View Related5.10 Breezy configured as machine controller. Works great eth0 is a fixed IP to communicate with controller comms board. Not easy at all to alter - the comms board is hard coded to listen on eth0 for commands.
I can use eth1 as the default gateway and ping google.com, etc. But when I now attempt to communicate with the controller with netcat, e.g.
Code: echo !HH | nc 192.168.1.6 80
I obviously never get an answer since the request is passed via eth1. Using the -g option with netcat doesn't work either. I had a look at iptables but it doesn't seem to be able to do what I want. How I can still use eth0 as my communication port to the controller whilst eth1 is the default gateway?
I have two servers on a vlan at my datacentre/colocation and previously both servers had public IPs on their eth0 interfaces. The servers are HP ProLiant DL360s - one is a G4 and one is a G5 The newer G5 is now the LAMP server and the G4 has been retired and I want to repurpose it as an iSCSI target using openfiler freenas or similar.
My G5 has public/static IPs lashed to the eth0 physical interface and the eth1 is not configured to do anything yet. The G4 will have both interfaces available - perhaps one for ssh access from one of my static public IPs and the other to be a private IP on the local vlan. Here is what I am trying to get my head around...
The G5
eth0 - Public IP - full LAMP services on two or three virtual interfaces
eth1 - Private IP 192.168.0.1
The G4
eth0 - Public IP for ssh
eth1 - Private IP 192.168.0.2
Because my traffic between eth1 on these boxes is via private IPs on the local private vlan it doesn't add to my quota for bandwidth. How do I go about configuring the routing and gateways and other aspects of this so that I can run a private IP space network between the eth1s and still serve the outside world from the eth0s...
I am afraid that if I assign the private IPs to the eth1 interfaces the routing may either not work or interfere with the access to the production internet facing interfaces (eth0s).
Have an AR5212 802.11 abg. When I try to activate it, the activate button is greyed ou
View 2 Replies View RelatedI tried this :
Quote:
ssh -ND 9999 username@home_router_ip_address
and this is output :
�nani@jebe-kevu-ovaj-PC:~$ ssh -ND 999 nani@nani.homelinux.com
Privileged ports can only be forwarded by root.
nani@jebe-kevu-ovaj-PC:~$ sudo ssh -ND 999 nani@nani.homelinux.com
[code]....
which password is he looking for exacly ? user nani is main user at ubuntu after he asked me for password i typed my nani user password and i got in , after how you can see he ask me for onather password i tried the nani�s password but nothing is heppening ?
It worked in 10.04 using ndiswrapper, but the connection was very weak (In Windows, it works perfectly). I blame ndiswrapper and the windows driver for the connection issues.In 10.10 x64, using ndiswrapper does not work. It says hardware present, but iwconfig shows no wlan0 adapter. I downloaded the driver from RealTek's website (rtl8192su) and compiled it. It gave a lot of warnings about integers being out of range, but I ignored them and went on anyway. If you want the exact warnings, I can put them on a pastebin and post the link tonight when I get home from work.
After doing a make install, I plugged in my adapter. As soon as it kicked on, the light on the adapter would blink and the screen would go black with a lone cursor in the top left corner of the screen. The drivers are obviously suspect, since I can make uninstall, plug in the adapter, and continue on with no network.Has anyone gotten this adapter/other adapters with the rtl8192su firmware working in 10.10 using a stock x64 install? It has to be stock or using packages available on the disk since without using the adapter, I have no internet.Maybe I'll try the drivers on 10.04 and see if they're just not compatible with 10.10.
how i can use my nokia E52 as a modem in ubuntu 10.10 to surf net in windows i use nokia pc suite and connect my phone by usb cable and connect
View 9 Replies View RelatedA few days ago I decided to do a clean install of 11.04 (which I was running when I followed this thread [URL], which solved my problem of my wifi not being able to surf the web or download anything, even though it said i was connected). After the install i noticed that my wifi was acting up and I realized I had to install the realtek driver again, like I did the first time. I followed the thread I stated above again the exact same as I did the first time when it worked for me, now when I boot up I get stuck after the grub menu, it goes to a black screen and I cannot get off of it. I reinstalled ubuntu 11.04 and everything was fine, then I compiled the realtk driver again and the same thing happened. Kernel version 3.6.38-10 Generic (I think this has something to do with the black screen after the Grub menu).
View 3 Replies View Related