Ubuntu Networking :: Belkin Surf & Share On 10.10?
Nov 4, 2010
It worked in 10.04 using ndiswrapper, but the connection was very weak (In Windows, it works perfectly). I blame ndiswrapper and the windows driver for the connection issues.In 10.10 x64, using ndiswrapper does not work. It says hardware present, but iwconfig shows no wlan0 adapter. I downloaded the driver from RealTek's website (rtl8192su) and compiled it. It gave a lot of warnings about integers being out of range, but I ignored them and went on anyway. If you want the exact warnings, I can put them on a pastebin and post the link tonight when I get home from work.
After doing a make install, I plugged in my adapter. As soon as it kicked on, the light on the adapter would blink and the screen would go black with a lone cursor in the top left corner of the screen. The drivers are obviously suspect, since I can make uninstall, plug in the adapter, and continue on with no network.Has anyone gotten this adapter/other adapters with the rtl8192su firmware working in 10.10 using a stock x64 install? It has to be stock or using packages available on the disk since without using the adapter, I have no internet.Maybe I'll try the drivers on 10.04 and see if they're just not compatible with 10.10.
View 1 Replies
ADVERTISEMENT
Jan 3, 2011
i have ubuntu 10.04 i believe and i cant connect to the intenret i guess its not detecting my wireless adapter. i cant try ethernet cord which prolly would work because i cant move pc to another room....is there any fix for this? i googled linux drivers but i cant find any...i do have the cd that came with the adapter.
View 1 Replies
View Related
May 10, 2011
You'll need to reply like I'm an absolute idiot. I cannot get the stupid thing to work. WINE won't install, and I'm really confused on how to make it work. If anyone could please give me a step-by-step, that would be great.
View 1 Replies
View Related
Nov 4, 2010
I have just installed Ubuntu 10.10 on a pc as a duel boot, On the computer I use a belkin surf and share n speed controller to connect wireless ( pc doesn't have a wireless connection) I have found the correct driver RLT8192SU from realtek and unzipped it and moved the contents to a flash drive. The problem is I am a total noob to Linux based systems and i have no ideal how to install the contents, there is a read me file but it makes no sense to me and i have absolutely no clue how to install the driver so i have no internet. Is there an easier way to install or step by step instructions?
View 6 Replies
View Related
Mar 6, 2010
I have Huawei B970b (see specs). It a router with wireless and GSM capability. It works ok in XP. I can connect and ping its IP 192.168.1.1. In Ubuntu I can see the wireless SSID and could connect to the router but I can not surf the net nor I can ping 192.168.1.1.
View 1 Replies
View Related
Mar 29, 2010
I tried this :
Quote:
ssh -ND 9999 username@home_router_ip_address
and this is output :
�nani@jebe-kevu-ovaj-PC:~$ ssh -ND 999 nani@nani.homelinux.com
Privileged ports can only be forwarded by root.
nani@jebe-kevu-ovaj-PC:~$ sudo ssh -ND 999 nani@nani.homelinux.com
[code]....
which password is he looking for exacly ? user nani is main user at ubuntu after he asked me for password i typed my nani user password and i got in , after how you can see he ask me for onather password i tried the nani�s password but nothing is heppening ?
View 1 Replies
View Related
Nov 22, 2010
how i can use my nokia E52 as a modem in ubuntu 10.10 to surf net in windows i use nokia pc suite and connect my phone by usb cable and connect
View 9 Replies
View Related
Aug 10, 2011
A few days ago I decided to do a clean install of 11.04 (which I was running when I followed this thread [URL], which solved my problem of my wifi not being able to surf the web or download anything, even though it said i was connected). After the install i noticed that my wifi was acting up and I realized I had to install the realtek driver again, like I did the first time. I followed the thread I stated above again the exact same as I did the first time when it worked for me, now when I boot up I get stuck after the grub menu, it goes to a black screen and I cannot get off of it. I reinstalled ubuntu 11.04 and everything was fine, then I compiled the realtk driver again and the same thing happened. Kernel version 3.6.38-10 Generic (I think this has something to do with the black screen after the Grub menu).
View 3 Replies
View Related
Mar 11, 2011
I'm looking at buying one of the above cards, and was wondering if anyone knew if they worked in master mode (e.g. as an access point). According to the Aircrack-ng site, they support packet injection and monitor mode. Is master mode support solely up to the driver used with the card, or does the card have to physically support it?
View 2 Replies
View Related
Jan 20, 2011
I use openSUSE 11.3 with KDE 4.4 and I have a Belkin Share Wireless USB Adapter (F7D2101 v1) , I attached the adapter and rebooted the system, it does not work. Can someone help me configure?
I attached the adapter and the system says:
dmesg | tail
[ 1184.799076] usb 1-1: USB disconnect, address 2
[ 2003.060031] usb 1-1: new high speed USB device using ehci_hcd and address 7
[ 2003.194525] usb 1-1: New USB device found, idVendor=050d, idProduct=845a
[ 2003.194531] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2003.194535] usb 1-1: Product: Connect Wireless USB Adapter
[Code]...
View 9 Replies
View Related
Mar 26, 2010
i have ubuntu 9.10 on a lenovo s10. i had my alfa awus036h and it worked fine no issues. except for having to reconnect every hour or so. anyway i got back track 4 final and installed it on usb with unetbootin. i started to use wicd and etter cap on it. and i made sure to turn off wicd when i was done then i went back into ubuntu (i didnt install bt) and i started to have problems like everyone else. slow connections ,disconnects after 1 min, and can still connect to networks but cant surf.
View 1 Replies
View Related
Nov 8, 2010
I have Dlink Wireless G Access Point.
I can connect to my access point to surf internet. I setup my Dlink access point (password, network name, etc) in Vista by visiting "http://dlinkap/" in my web browser.
In ubuntu, I can connect and surf the web/internet but i cannot access the setup page.
When I try to type the "http://dlinkap/" to my browser then the browser will redirect it to google search.
I try 192.168.1.1, I can access my linksys router. but my dlink access point, i cannot access the setup page.
View 8 Replies
View Related
Oct 24, 2009
When I activate eth0, the system says that the eth0 seems not exist. However, I can surf in the internet.
View 1 Replies
View Related
Feb 20, 2011
I have two network cards in my computer (Debian). One (eth0) is connected to the router which is connected to the internet, the other one (eth1) is connected to my laptop (Gentoo). Now I want to surf the web both on my computer and on my laptop. I obeyed some tutorials "Linux as router":
1. On my Debian system IP-Forwarding is on:
Code:
takada:/home/sam# sysctl net.ipv4.ip_forward
net.ipv4.ip_forward = 1
2. Laptop has IP 192.168.0.2 and this is the output of 'cat /etc/network/interfaces' on my computer:
Code:
takada:/etc/network# cat interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
But a ping from my laptop to 192.168.1.1 (router to internet) still gives:
Code:
connect: Network is unreachable
View 4 Replies
View Related
Sep 12, 2010
I installl centos in my pc after i install, i cant surf the net,showing no devices for network
View 1 Replies
View Related
Aug 3, 2010
Ok, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.
PS: when I try sudo ndisgtk it comes up with command not found.
View 1 Replies
View Related
May 15, 2011
I want to use a Belkin fsd8063 v6 with 10.10 how do i make it work .
View 9 Replies
View Related
Jun 23, 2010
I have a new belkin N1 router which I tested in somebody else's flat. It worked fine. When I got home I reset it by pushing a paperclip in the hole for 10+ seconds to erase this flat's internet connection settings (username and password and stuff). After this I plugged it the computer and tried to connect to it (wired connection) using 192.168.2.1 (this is correct for that router, it is not 192.168.0.1). But the browser says it is offline and cannot connect. The lights of the router cycle, the "modem router" light blinks continuously and the others briefly come on and go off again, every few seconds. I tried resetting it again, several times, leaving it off for a few hours, leaving it on for a few hours, etc.
View 2 Replies
View Related
Oct 30, 2010
I am new to Linux and use Xubuntu 10.10, but the usb wireless adapter won't run. I followed the instructions on [URL], but nothing happens.
View 9 Replies
View Related
Dec 8, 2010
I am having trouble with getting my desktop to connect to my wireless router.
Here are the specs I currently have:
WIreless Brand: Belkin
Wireless Model: F5D8055 v1
Wireless Chipset: 050d:825a
Ubuntu Version: 10.04.01 LTS
Machine Brand: PC
Kernal Architecture: 2.6.32-24-generic x86_64
I really am having a problem. I can see wireless networks, but when i try to connect to one, even unsecured, the icon just keeps acting like it is searching for a wifi spot. Im really confused.
View 9 Replies
View Related
Mar 5, 2011
I'm having a slight problem with my new wireless card that I purchased. I installed the firmware and the like and it does work, my computer recognizes it and I can search through my available networks, only thing is though.I cannot connect to any of them. I'm fairly sure it's a problem with it obtaining an ip address though.because it does connect briefly and I read the status and it shows no IP address, but when I connect through wired internet all that information is available. I tried setting my network configuration to static and that didn't help at all. I'm only a week into Ubuntu so this is all still fairy confusing for me.
View 1 Replies
View Related
Jun 20, 2011
I have just installed 11.04 alongside windows vista. I have been trying to connect my router but it keeps saying disconnected from network. I have ran all of the troubleshooting tips in ubuntu its self and everthing seems in order. is there any settings i need to change on my router or in ubuntu's edit connections programe? I managed to connect to the router once to upgrade from 10.10 to the 11.04 but even before upgrading to 11.04 i had problems connecting to the router.
View 6 Replies
View Related
Jul 27, 2011
I have a belkin n150 usb wireless adapter that doesn't seem to work. I have searched for a solution on this and other forums, but the advice is either too confusing/long for my noob brain, or applies to older versions and no longer works.
I am running ubuntu 11.04, the usb device shows up on lsusb so I know it's there, but I can't get it to work. I have installed ndiswrapper and put in the driver from the cd, didn't work. I downloaded the RT2870 linux drivers, tried sudo make and sudo make install and that didn't work (I probably didn't install correctly).
View 4 Replies
View Related
Feb 14, 2010
I've been having one hell of a time getting my old computer back up and running for my son. A year ago I had this computer running with Ubuntu despite it's connection to our local wireless with a Belkin N1 F5D8001. Now I've got the newest version of Ubuntu installed on his computer and I'm trying to go through the same steps that I went through in the past. I've managed to get the NetMW14x.inf file downloaded and I've used the new GUI for windows drivers to install the .inf but it's showing no Hardware loaded.
Also, in the past, there was at least recognition of the existence of the card if I did an ifconfig, it was just a matter of assigning a driver to it, etc. Now, if I do an ifconfig, I get the ethernet (disconnected) and lo (loopback). So it's as if the card's dead, but it isn't because I just wiped XP off it this morning. What the heck is going on with this thing? I could swear I've done everything I've read and everything I recalled doing in the past to make this work, but I'm mostly hosed by the fact that it's as if the system doesn't give a crap that the card is inserted at all.
View 1 Replies
View Related
May 2, 2010
I've got an old IBM Thinkpad T41 that I just play around with Ubuntu on. The internal Wireless card is broken, so I bought a Belkin F5D8013 PCMCIA Wireless N card a while ago. It worked fine with Ubuntu 8.04-9.10, but it will not work with 10.04. It sees the networks just fine and will let me type in the network password, but it will not connect. Everything else in my house connects without a hitch, so I know it is Ubuntu causing the problem.
View 1 Replies
View Related
May 4, 2010
I have been trying to get my Belkin FD8233-4v3 wireless-n usb adapter to work in Ubuntu since 8.04. It has worked with ndiswrapper under 32-bit (never the 64-bit) versions in the past, but has never been able to be configured directly. It uses the Ralink RT2870 chipset, but cannot seem to be configured using the drivers from the Ralink website.
With Ubuntu 10.04 64-Bit, everything has changed. I have high hopes that this adapter may finally work correctly and without ndiswrapper. As soon as I first booted 10.04, for the first time ever, Ubuntu recognized the IF automatically, reported my wireless router, allowed me to enter my 128-bit WEP hex code and tried to connect up. It is failing miserably, but it is making a valiant effort.
View 4 Replies
View Related
Jun 15, 2010
I was dual booting with XP and Jackalope using a Belkin N wireless USB. The install on Jackalope was simple, a plug and play type situation, plugged it in and it worked. A few days ago though, i wiped the whole computer and installed Lynx. To my dismay, even though Lynx sees the wireless, sees the available signals, lets me input my password... it fails to connect. It just spins and spins and eventually asks for my password again...
I'm still pretty new to Ubuntu, and Linux in general. I updated, and pretty sure i retrieved 3rd party drivers for the video card properly (using a cable connection), but thats pretty close to where my "expertise" ends.
View 9 Replies
View Related
Jun 30, 2010
I have a Compaq AMD64 that has ubuntu 9.04 on one HD that works great. I've installed 10.04 on a separate HD and had problems installing it. I have 10.04 running now but I can't get my wireless card to work. During installation I skipped setting up the wireless network. Now when I boot into the 10.04 partition I cannot get the nm-applet to work. I can't get it onto the task bar and I don't see it anywhere else.
I checked to see what drivers are installed, and since I have no connection with that OS I can't update or DL drivers for it. I'm pretty sure that it is because I skipped setting it up during installation. What do I need to do to get the wireless working now? I checked other threads and none seem to pertain to my situation. Since I have to log into the 9.04 partition, I can't copy/paste outputs very easily.
View 3 Replies
View Related
Jul 27, 2010
I've searched everything I can think of to find out if this or something similar has already been solved but I didn't find anything, that's not to say it hasn't already been done because I don't understand enough of what I'm using to search properly, if it has then I apologise.
The problem I have is connecting to the internet using Ubuntu 10.4 and my Belkin Wireless G Gaming Adapter, I'll try and give an overview of my setup. PC - BelkinWirelessAdapter - Router.
The PC is connected to Adapter via ethernet, I set up the Adapter through my web browser to connect to my router, it finds the router perfectly but no matter how I set up the IP settings etc... it won't come up saying it is connected to the internet, the connection to the adapter itself seems okay as long as I am only trying to get into the adapter itself which requires a particular IP address, this address can't be used to get online though, so when I change it to what works on every other system I've used nothing happends, nothing happens when I use DHCP either. I'm a complete Linux noob so please make any responses as simple as possible lol
View 1 Replies
View Related
Jan 3, 2011
i am complitly new in Ubuntu and the world of Linux in general, so i said to my self its better late then never, i installed the last one 10.10. but i am having trouble with my wifi usb adapter (BelkinF5D7050 v 1000), the same adapter works perfect under XP in the same PC. when i go to NM i dont see it in the list of network cards "i see just my two other normal network cards + loopback" and i have permanent small "x" on the icon of NM up in the task bar, even if check or uncheck "Enable Networking", it alwayes show a info bubble "you are now offline", here is the result of all the command line that can help getting better view on my problem
[Code]....
View 1 Replies
View Related