my wireless card is working well .... but (11.04) is not able to create an ad-hoc (peer-to-peer) network successfully.
i have made a P2P network by (ubuntu 10.10) ... it had worked well ... and i could sharing my internet and files to other computer .
now, the problem is i'm able to create a new ad-hoc network but it doesn't listed in other computer.
Using Fedora 10, can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
View 2 Replies View RelatedCan anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
View 4 Replies View RelatedI connected a USB Wireless Dongle (Sapido AU-4512S) on my Ubuntu 10.04 64bit. I wanted to share my wired internet connection from my pc to my friend's laptop.
So, I did the following:
1. Installed ndiswrapper-utils, ndiswrapper-common and ndisgtk in Synaptic Package Manager.
2. Installed Windows 7 64bit driver of my USB Dongle through Wireless Network Drivers(ndisgtk)
3. Now it says, net8192su -- Hardware present: Yes
4. Created a Ad-hoc connection clicking on Network Manager > create new wireless network..
5. Edited the Name, set Security to WEP 128-bit Passphrase and entered my desired password.
6. Finally clicked Create but it says "Wireless Connection disconnected"
I'm thinking about maybe the problem is with my dongle so I checked by using the command:
Code:
which gives me information about wlan0
The next thing I did worsen the situation. I unplugged the USB dongle ang plugged it again. This time,
Code:
gives me no result anymore.
Code:
Also, the option that says "create new wireless connection" disappeared in my Network Manager Applet now.
Now I have no problem. To restore the "Create new wireless connection" in my Network Manager Applet and finally create a wifi hotspot using my wired connection from pc.
Code:
Code:
There seems to be a lot written about virtual networking but I am not sure what approach to take in my situation. My local subnet has a public block of 128 addresses. I have a virtual host running on my machine. My machine has a static address and I'd need to assign one to the guest. I have edited the guest's interface file and assigned a public address to it's eth0. However the guest cannot ping out and I can't ping in.
By default the virtual machine manager creates a virtual network (virbr0) and assigned a private address range to it. I have tried to create a new virtual network using a subnet of my public range (/31) but the manager says the range must to a minimum of 16 addresses (/4). It doesn't look possible to achieve my aims using the virtual machine manager.
In the past I have used the procedure laid out here:[URL].. which is to manually create a bridge. I am not sure that is relevant for my 9.10. I think I would have to disable the network manager if I were to do that and I am not sure how to do that.
I m facing problem in creating virtual network adpater. I want to have multiple mac address for a single NIC.
View 2 Replies View RelatedJust replaced a working install of Ubuntu because i like GS over unity but i cant get my USB760 EVDO card to work. The usual fix of editing the cd.rules file and copying some information into modem.fdi does not seem to work on F15..
Also, noticed that when i attempt to create a broadband connection using network manager it allows me to go through all of the setup dialogs, but never actually adds the broadband connection.
I have a CentOS 5.5 server running currently with a Netgear gigabit ethernet card and for wifi I have a wi-fi card with the chipset: RT2860.Now I have gotten the ethernet card and wi-fi card working but my main question is: How do you bridge the connection between the ethernet card and the wi-fi card to create a wireless network with a hidden ESSID if possible and WPA encryption? (So the server basically acts as a wireless router as well as doing all the other stuff I need to do on it).
View 2 Replies View RelatedSo I have the strange task of trying to make something like I said above work in Lubuntu 10.04. But every time I do, the share is not accessible because none of the important permissions (other) can be set because its, well, NTFS in linux. And I know of no way to fix it.Is there an easy way, preferably with Nautilus since the person I am setting this up for isn't a computer expert, to setup this share so thats its accessible and writable by other computers on the network?
View 3 Replies View Relatedhow to setup a home network with my three ubuntu boxes. I've looked around online and tried from what i know with windows to setup a file sharing network, but i haven't had any luck. I've been using ubuntu now for almost seven months and would really like to figure this out to expand my setup.
View 9 Replies View RelatedI've gotten the Ubuntu Broadcom STA driver working on my AppleTV by (not blacklisting) adding the appropriate rmmod statements to my rc.local script. The system now recognizes the card; lswh -C network:
[Code]....
I can now successfully join wifi networks on the device. My ultimate goal is to create a wifi AP using the card via Ubuntu. The card is a bcm4328. I have attempted to create a wifi hotspot using the "Create new network" menu item from the network menu applet. When I try to join the network on my MacBook, it apparently can join successfully, but then gets a "Self Assigned IP" which is outside the LAN's subnet (which is 192.168.200.X, while the IP on the MBP is 169.254.161.193 and the network control panel indicates that it is self-assigned).
It would appear that the AP on the AppleTV is not bridged with the wifi. I have attempted to follow the CLI-based tutorials but chickened out when I saw I had to set the card to master mode as I do not believe the bcm4328 is capable of this.
I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies View RelatedI have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedI'm on opensuse 11.4 (11.3 won't work with my monitor).
My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.
I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward
but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?
how to create network policy and system policy in opensuse11.4 and domain policies also???
View 1 Replies View RelatedEDIT: Whoops. Just realized that there is a Networking subforum. Apologies. In 10.04, I am able to get to the dialog in NM that asks for the network name and security for the creation of a new wireless network. However, the "Connect" button is grayed out and filling out all fields doesn't allow me to press it. I assume that this means that either there is a problem with my configuration or that my network card is not supported. Here is the lshw entry for my wireless card:
Code:
*-network
description: Wireless interface
product: PRO/Wireless 4965 AG or AGN [Kedron] Network Connection
vendor: Intel Corporation
[Code]...
EDIT2: Well, I was able to make an ad hoc connection via "Edit Connections" This seems to be a bug in the NetworkManager dialog.
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
I have a machine that has eth0 and eth1, and now I want to create an eth2 and assign it some IP address.
What's the command for doing this?
We have a storage server here running Windows. I have full permission to my share, blah blah, whole 9 yards. When I'm on Ubuntu and connect to it, I cannot create a folder or paste any items in "my" folder unless I put it in a sub folder.\storagejason = cannot create folders.\storagejasonstuff = can create folders.So, I come here asking the obvious question: dubya tee eff??
View 1 Replies View RelatedI'm in a situation where we might see a few Ubuntu machines added to the fleet of systems here at work (school district). A problem that I'm facing is I would like to do a very, very simple task in Ubuntu, which is to create a shortcut share to a network resource. On Windows, you can right click - new - shortcut - \servershare, done. Then when you click on it, you have the appropriate permissions within the folder based on what permission settings exist on the actual server where the folder resides.
In Ubuntu, the closest I can get is to create these shortcut links on the left side of Nautilus in the bookmark pane. Here's the part that rages me to no end. If I log out and back in, they're ALL renamed to "smb". LOL. What. Really? I'd like to create shortcuts for several network resources. I'd like these links to either be within the Nautilus bookmark area, or within the desktop itself. Ubuntu is on the domain,
Is there someone who knows how to create a RPM from netatalk 2.0.5. Or better has a URL to a RPM? I aske this because so fare I know there are no RPM's for opensuse 11.2 (or suse). I want to use this RPM in the susestudio this is because the version in the repositories don't work with snow leopard.
View 9 Replies View RelatedI'm using UNE Remix 10.04 and was wondering if it is possible to create a shortcut in the (GUI) Main Menu for an (SMB) network mount
View 1 Replies View RelatedI'm trying to create a 10.04.3 installed with a specific set of packages: nothing obviously special about it, just ubuntu-desktop, a few devel tools, and with a pre-seed file that sets up a few non-default parameters.
Everything works exactly the way I want it to, except for one important detail: the install always pulls packages over the network (and possibly updates to the apt database--it's not always easy to tell, during the install, exactly what it's doing). In any case, it stalls if the network goes away in the middle of the install, and since the install is intended for places with poor, intermittent network connectivity, so this is an issue for me.
I tried doing an install without any network connectivity, and it succeeded, so all the necessary packages are in the ISO. It's only when the network is available that it tries to pull over something (possibly apt files, since that's where the process seems to hang for hours when there is a slow network). So I can install from scratch in 10 minutes when the network is disabled and 2 hours when the network is enabled--and no other changes!
I don't care if the resulting ISO file doesn't fit on a CD (as long as it fits onto a DVD), but I want an ISO that doesn't insist on reaching out over the network during the install.
I simply cannot get this to work, has anybody managed it?
My problem is related to tuncfg I believe. I make the modification to the source of tuncfg to change ifconfig to /sbin/ifconfig. If I run hamachi start debug I get the following output:
It appears it cannot create the hamachi network interface because it doesn't appear under ifconfig.
Code:
09 23:14:39.810 [ 117] [ 3338] ipc: login
09 23:14:39.810 [ 117] [ 3338] ses: set_reconn(no)
09 23:14:39.810 [ 117] [ 3338] ses: go_online
09 23:14:39.810 [ 117] [ 3338] ses: state 1.1 -> 2.0
[Code].....
I tried to build a PPP connection with umtsmon, but failed. I'm using a ZTE MF110 Stick. The reaction from my provider's support was succinct: "Linux untersttzen wir nicht." (We don't support Linux.)
The hardware seems to work fine, the stick shows a green light, and I sent a test SMS via umtsmon. The umtsmon interface successfully identifies my Provider, but does not connect.
Here is part of umtsmon debug output:
Code:
UIState::setState(6 -> 6)
##P4 t=133: ConnectionInfo:InhibitionCount ++, now is 1
##P3 t=133: TempSerialPort::TempSerialPort()
##P5 t=133: 0x75a6c0 = Query::setSerial(0x7fffece12a00)
##P3 t=134: Serial::openDev('/dev/ttyUSB2') as FD 8 - Serial instance
[Code].....
I cannot seem to create a tun device using ifconfig, even though the module is loaded, and the node tun is present in /dev/net and appears to have correct access permissions, trying to use nstx which requires the tun device. Only thing I can think of is adding an alias, but not sure where, since there is no /etc/modprobe.conf or /etc/modules.conf in SUSE 11.3.
View 2 Replies View RelatedI want to create a user on my opensuse 11.4 computer, for the sole purpuse of using it to access network shared data (eg samba, nfs, etc). This user must be in the "Users" group, but it must NOT be able to login directly on the computer, i dont want him to show up on the GDM users list at logon, he must not be able to login to a terminal, etc.
How can i add a user like that? must he belong to a specific group?
I get the following error:
Quote:
Unable to connect to server. Please check your settings and try again.
However at the same time I get a notification pop up on the taskbar that says :
Quote:
Succesfully connected to xxxxxx
sftp://xxxxxx:22/xxxx
I want to create Social Network Software. What are the specifications required for using Linux as server.
View 4 Replies View RelatedI am new linux like OS. I need the steps to create Samba shared and to use it in my network.
View 5 Replies View Related