I have install the broadcom sta wireless driver on my laptop it works fine but i guess it's not compatible with aircrack cause i cant scan using the wepcrackgui. So I try install b43 driver but I always have the same error when I type on the termial
[code]...
what is going on? Im using Ubuntu natty 11.04
if i can find out whether my wireless card is compatible with aircrack, after running the lshw -C network command i received these results
*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
[Code].....
if my wireless card is compatible with aircrack.
how to use aircrack-ng on ubuntu 10.4? cos i actually installed it using 'sudo apt-fast install aircrack-ng' but got some error when i tried sudo airodump-ng eth1. i use dell inspiron 1545,maybe the following result will help
jiballx@jiballx-laptop:~$ sudo airmon-ng stop wlan0
[sudo] password for jiballx:
Sorry, try again.
[sudo] password for jiballx:
InterfaceChipsetDriver
[Code]...
im trying to install aircrack and i keep getting this error code. I am completely new at this. I have ubuantu 10.10 or the latest edition.
View 3 Replies View RelatedI have an laptop HP6735s (BCM4322 wireless adapter). I have installed drivers for wireless adapter. The problem is aircrack. When I type in: aireplay-ng -9 eth2 .An error appears as:sure RFMON is enabled: run 'airmon-ng start eth2 <#>'sysfs injection support was not found either.
View 1 Replies View RelatedI don't know why this happen a lot of time. But my first trial I successful to crack my neighbor WEP key and it write down the password beside that. But now, it doesn't show the decrypted password even the process was successful. Here the url of image [URL].
View 4 Replies View Relatedfertech@fertech-laptop:~$ sudo apt-get install aircrack-ng
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package aircrack-ng
fertech@fertech-laptop:~$
I'm having an issue with aircrack-ng, when I use an aireplay-ng I don't get any ACKs from my network.
I'm using a RNX-EASYN1 with a rt3070 chipset on ubuntu 9.10
That's my command:
HTML Code:
And that's what comes up after:
HTML Code:
This one is for my network, but I tried it for some other networks just to check if there's something wrong with my network. But I didn't get any ACKs anyway.
I'm not very familiar with aircrack-ng, because I just started to play with it, please if there's somebody who's good with using an aircrack-ng.
I've just bought a GEETEK Hercules USB Wlan adapter, which has the Ralink rt3072 chipset. The Connection manager can find wireless APs, but it won't connect to any of those. Also, aircrack-ng does not find any APs while scanning.After some tinkering and a lot of restarting, I can now connect t wireless networks, although slowly. However, I still can't use it with aircrack-ng.
View 6 Replies View RelatedI was wondering if there is a way to manually patch Aircrack -ng with 'airodump-ng-channel-handling-broken-fix.patch' without installing compact wireless package, because I end up with nonfunctional network when I compile compact wireless package. If possible where to paste that patch?
View 3 Replies View Relatedive just installed the aircrack package in my dell vostro 1310 which i bought with its ordinary wireless card ( hell knows what it is. couldn't find..).At the very first time while trying to reach my wireless internet i was using backtrack 4 and i was not sucesfull.. that would be good normally, but it was not. because i couldnt do it cuz my wireless card wasnt being recognized by airmon..so i tought..i can use my wireless with ubuntu... then i got ubuntu again.. and intalled the aircrack.. as i run it i found ou t that still it wont find my wireless card...do i need any further config. to make it work with aircrack ??i can only find eth0, which is my wired network device....
View 1 Replies View RelatedI have an Acer Aspire One -532h and i just installed ubuntu 10. I am trying to crack my own Wep network at home with Aircrack-ng. So after i installed Ubuntu and installed everything in "updatemanager", i installed Aircrack,Macchanger. And as i look in "iwconfig" and ifconfig i see the Atheros driver Ath9k and Wlan0. Now my 1st question. Do i have to install madwifi or such for the aircrack to inject?
2:nd I have tried to install madwifi also but when aireplay-ng want to inject ,the whole computer freezes. How do i fix this?....have looked aound google and found that many have the same trouble...
I am trying to audit my wireless router due to someone in the neighbourhood hacking it, and have run into a few problems. When I run airodump-ng, everything works fine. However, when I try to get the .csv file and run "airodump-ng -w test --channel 6 --bssid ---------- mon1" (obviously with my the mac address of my AP instead of x's) I get this:
CH 6 ][ Elapsed: 4 s ][ 2011-02-02 17:48 ][ fixed channel mon1: -1 ] The problem is the [ fixed channel mon1: -1 ], because when I go to the next step to try to force a handshake, it says:
18:00:34 Waiting for beacon frame (BSSID:-----------) on channel -1
18:00:34 mon1 is on channel -1, but the AP uses channel 6
I have scoured the Internet for answers, and have seen several people with the same problem, but no solutions that work for me. I think it may have something to do with the driver. I really do apologise if this has been answered properly several times, but none of the solutions seem to be working in my case.
I've always wanted to learn this branch of computing, and I do think it's rather interesting. So, I was following in unison both this and this, which so far just tell me to download ipwraw-ng and extract it, but when I cd into the folder, and say make, I get this:
Code:
ibo@ibo-laptop:~$ cd Desktop/ipwraw-ng/
ibo@ibo-laptop:~/Desktop/ipwraw-ng$ make
WARNING: $SHELL not set to bash.
[Code].....
i have Broadcom Corporation BCM43225 and aircrack doesnt working, i think problem is in drivers but i dont know what can i do ... i was looking for but i diddnt find any working ;/
View 8 Replies View Relatedhow to patch it. but the problem is, I can't find a working download link.
View 1 Replies View RelatedI just installed ubuntu 9 and I went to package manager to install aircrack-ng version 1:1.0-1 and it says that it has installed but then when i go to applications/internet/aircrack is not shown.
View 1 Replies View RelatedIm running Ubuntu 11.04 with alfa awus036nh. I first tried to install drivers from alfa disc for RT3070. Everything seemed to be working but i got the imfamous mon0 channel -1 problem with aireplay-ng. Did some research-downloaded and tried different drivers rt2800 rtl 8170. Bottom line is i dont know what THE F*** im doing. I think i installed three different drivers. Now airodump doesnt show any output. Im going crazy. Is linux designed to make ppl go crazy. Windows is calling me to go back to it. THings shouldnt be this complicated. BTW im on a asus laptop with atheros ar 9285 card in it. a breif explanation of how drivers work in linux . Once again maybe im just putting the cart b4 the horse as im only about 2 weeks fresh into ubuntu.
View 1 Replies View Relatedseems to be working but the card is scrolling through channels while trying to attack a certain channel! how do i stop it?
View 1 Replies View RelatedI am running Lucid Lynx, kernel 2.6.32.23 generic, I have a card with the Broadcom BCM4311, with the STA Linux Wireless driver. I have no idea how to get monitor mode to work with the Aircrack-ng suite's Airmon-ng command. I use the command: sudo airmon-ng start eth1
And I get this output: Found 5 processes that could cause trouble. If airodump-ng, aireplay-ng or airtun-ng stops working after a short period of time, you may want to kill (some of) them!
PID Name
883 NetworkManager
893 avahi-daemon
896 avahi-daemon
931 wpa_supplicant
[Code].....
I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
View 5 Replies View RelatedI am moving and am having AT&T DSL set up at my new place.. It is going to be set up next monday and I opted to not purchase their DSL modem (I wouldn't be there when it would be delivered and it would have been stolen most likely) So, anyone know of a DSL modem compatible with AT&T DSL that will work that I can pick up at a chain store? Wal-Mart, etc...
View 1 Replies View RelatedI currently use Ubuntu 9.04. I have thought of upgrading to 10.04 for a long time, but I am unable to do so as I do not know if my mobile broadband device, Huawei EC1260, works out of the box in 10.04. In the Ubuntu wiki, I found that it was not compatible with 9.10 and a bug report had been already filed. A line is mentioned in the page, which tells us:
Declined for Lucid by Jeremy Foshee
So, does this mean that the problem is fixed in 10.04? Or, if it is incompatible, then, how will I configure it so that it can work? Now, many people may be considering that I might just download the CD image and try it out. Although my company has given me the device with 5 GB of free usage, but I have to show reasons for any file downloaded more than 15 MB.
I've had way too many problems with my network card under linux and I'm looking to buy a new one because the money is worth the lack of headaches. My project: I'm breathing new life into my old, old pentium 4 computer by running Kubuntu Server on it and using it as a little samba filedump.
So I don't want to spend a lot on an ethernet card -- this computer is no prize. I just want the cheapest, most out-of-the-box-compatible-with-no-configuration card I can buy.
I started on Newegg (sorted by price: [URL]....CE&PageSize=20 ), and I've heard that cards based on the RealTek 8129/8139 chip may be compatible/cheap but I can't seem to find out ahead of time what chip the cards are based on.
I'm shopping for a Bluetooth dongle and I'd like to find one that "just plain works" with Lucid. I've searched and found a few posts about bluetooth, but nothing encouraging so far. Hopefully someone is using one and can vouch for its compatibility with Lucid.
View 6 Replies View RelatedI have given up trying to get my internal broad com network driver to work. I was wondering if anyone knows which external network drivers would work really well? I'm currently on a Dell Vistro 1320 notebook. I want to purchase one that I know is reliable and will work "for sure".
View 1 Replies View RelatedI am looking to reinstall Ubuntu on my desktop computer, in a dual-boot configuration. The system I am installing to should prove no hassle, but my biggest concern is my wireless card. It's a D-Link DWA-510 wireless card. Checking the D-Link website, they do not seem to have Linux-specific drivers available for that model, so I am wondering if there are compatible drivers available in Ubuntu?
View 4 Replies View RelatedI have a Samsung N310 with a atheros wireless card. Been having trouble getting it to work. I was thinking about upgrading to a N card anyway so I will be buying one tonight. Does anyone know of a Mini PCI N card that works out of the box with ubuntu 64bit?
View 1 Replies View RelatedI have installed NeatX on Ubuntu Lucid 10.04.[URL]..And I use the No Machine Windows client to connect.[URL].. On first glance it is superior to FreeNX because it does incorporate theme and style into the remote session. On longer usage it gets more and more trouble connecting. Basic commands like RestoreSession and Terminate do not work, but get the same reply.
Code:
NX> 500 Internal error
NX> 999 Bye.
Sessions still open, not unmounting
NX> 280 Exiting on signal: 15
[Code]...
I can create a new session but I cannot ever ever ever terminate it even after a reboot. What's going on? Is Ubuntu relying on Alpha stage software here?
Can I get a video conference software for ubuntu 10.04 compatible with yahoo messenger
View 1 Replies View Related