I just installed ubuntu 9 and I went to package manager to install aircrack-ng version 1:1.0-1 and it says that it has installed but then when i go to applications/internet/aircrack is not shown.
View 1 RepliesI am trying to install aircrack but when I try to a get an error message that says unable to locate package. The exact messages are:
The program 'airmon-ng' is currently not installed.
You can install it by typing:
I am pretty new to ubuntu so I am not really sure what I am doing. I don't know if I have to enable "universe" or what I should do. I am not sure if it matters but I am also running Ubuntu from my flash drive so maybe that is the problem.
I have an laptop HP6735s (BCM4322 wireless adapter). I have installed drivers for wireless adapter. The problem is aircrack. When I type in: aireplay-ng -9 eth2 .An error appears as:sure RFMON is enabled: run 'airmon-ng start eth2 <#>'sysfs injection support was not found either.
View 1 Replies View Relatedi have Broadcom Corporation BCM43225 and aircrack doesnt working, i think problem is in drivers but i dont know what can i do ... i was looking for but i diddnt find any working ;/
View 8 Replies View RelatedIt started with Update Manager constantly recycling and not updating. When it starts it shows 295 files and 308MB waiting to download. When I click on 'Install Updates' it appears to go through the process, and then presents me with the same 'waiting to install' window again - and again, and again - in fact as many times as I care to click the 'Install Updates' button. No error messages appear. The 'Settings' button produces the same apparent process as the 'Install Updates' button, but doesn't present me with any other screen.
I've tried all the solutions I could find on these forums and nothing works. The sudo suggestions for Terminal usually produce error codes. adjusting a line in the 'hosts' file. When I tried this I was presented with the obstacle of not having access to the read-only file, and no matter how much I searched I couldn't find how to gain access . While investigating all these possible solutions, I was directed in turn to the Software Sources and Synaptic Package Manager applications, but when I attempted to start them, 'Starting Administrative Application' appeared briefly on the taskbar - and then disappeared!
Im running Ubuntu 11.04 with alfa awus036nh. I first tried to install drivers from alfa disc for RT3070. Everything seemed to be working but i got the imfamous mon0 channel -1 problem with aireplay-ng. Did some research-downloaded and tried different drivers rt2800 rtl 8170. Bottom line is i dont know what THE F*** im doing. I think i installed three different drivers. Now airodump doesnt show any output. Im going crazy. Is linux designed to make ppl go crazy. Windows is calling me to go back to it. THings shouldnt be this complicated. BTW im on a asus laptop with atheros ar 9285 card in it. a breif explanation of how drivers work in linux . Once again maybe im just putting the cart b4 the horse as im only about 2 weeks fresh into ubuntu.
View 1 Replies View Relatedi can't install network-manager-pptp package with offline.i get this package from Code:http://packages.ubuntu.com/karmic/i386/network-manager-pptp/downloadJust now i use ubuntu9.10.
View 3 Replies View Relatedfertech@fertech-laptop:~$ sudo apt-get install aircrack-ng
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package aircrack-ng
fertech@fertech-laptop:~$
I want to install CmapTools in my desktop, which runs v.10.04. I have downloaded the .bin file from their site.Is there a way to install it using Synaptic Package Manager?
View 2 Replies View RelatedI'm running 10.10 and cannot seem to figure out why apt-get is not working.
It will generally get to the point where it should be unpacking the replacement, but it just hangs there. I have looked to find a way around that, but right now, I'm still looking at
Code:
Unpacking replacement libperl5.10 ...
I've had to sudo kill -9 dpkg and apt-get and delete the lock in /var/lib/dpkg/ which may have caused more problems... It seems like the problem started when I attempted to upgrade my version of Flash.
I can't open Package Manager and install or remove anything...this is what it says:
"The error message was:'Error:Opening the cache(E:Encountered a section with no Package:header,Eroblem with MergeList/var/lib/apt/lists repository.akirad.net_dists_akirad-karmic_main_binary-i386_Packages,E:The package lists or status file could not be parsed or opened)'This usually means that your installed packages have unmet depencies.
When I try to open SYNAPTIC PACKAGE MANAGER in my ubuntu 11.04 version, it is showing error. Following error is being displayed:
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_natty_main_bina ry-i386_Packages
E: The package lists or status file could not be parsed or opened.
E: _cache->open() failed, please report.
After installing the 'getdeb' and 'playdeb' debian packages that automate adding those repositories for [URL] my synaptic package manager started acting up giving me this error: ould not download all repository indexes The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct. Problem executing scripts APT::Update:re-Invoke '/usr/bin/daptup --pre'Sub-process returned an error code I am a long haul 48 state truck driver and it may be a couple days between replies until I can get to the next Wi-Fi hotspot.
View 3 Replies View RelatedWorst combination ever.. To fix "no wubildr" I have to use synaptic package manager. To use synaptic package manager I have to access recovery mode, which the "no wubildr" problem is not allowing me to. Is there anything else, than reinstalling ubuntu, I can do?
EDIT: the terminal is not working either.. Segmentation fault:/etc/sudoers is mode 0666, should be 0440. That is why I am unable to use the synaptic package manager.
i have windows 7 on my laptop and I wanted to install Ubuntu but I had problems with the partitions so I installed Wubi. It looks just the same as ubuntu, but I tried to find some programs in the synaptic package manager (like Kile or aMsn) but the manager is not finding anything I search for.
View 2 Replies View RelatedI have recently upgraded to Ubuntu 11.04 from Ubuntu 10.10. After the upgrade, I wanted to do a system cleanup using Synaptic Package Manager. After, I have marked a package for removal, the "Apply" button is still shaded, i.e., I am not able to click the "Apply" button. The "Apply" button is still not functional even I am able to download and install packages.
View 2 Replies View RelatedWhenever I try to install something with apt-get, I get a list of errors. Most of the time, the package I want to install gets installed anyway. However, this time samba stopped working, and I discovered that it was no longer on my system. I'm not sure how this happened - I haven't tried to remove it. So, I tried to reinstall it with 'apt-get install samba'. This time, the package did not install, and I got a long output from the terminal:
[Code]...
I'm trying to get a package manager working on my new VPS.
I didn't set it up The machine is running Fedora Core 5, so I came here.
Quote:
First I tried:
Quote:
What am I not doing? Then I tried compiling an older version from a tarball:
Quote:
Unfortunately when I entered "make" I got:
Quote:
So I googled and apparently I'm missing gettext too? So I downloaded that...
Quote:
Which is confusing as I thought I installed GCC a while back. Edit: Guess not.
Quote:
I have a small touchscreen tablet here that's running a cut down version of ubuntu (I think 9.04). It has its own flash gui and no mention of ubuntu on it anywhere (but I know 100% that it is). Anyway, its so cut down it doesn't even have things like apt-get, any file sharing capabilities and it cannot run .deb files. I can only do things to the filesystem via ssh not using the gui. Its running a busybox shell which is also very limited.
I would ideally like to be able to connect to some nfs shares on my ubuntu server with this thing but im having no luck. I have found out its because it doesnt have nfs-common or portmap installed (apparent dependencies). How would I go about manually installing something like that? I need to be pointed in the right direction as atm. I am not too sure. Baring in mind I cannot simply use apt-get or unpack a .deb file.
I currently have ubuntu with NO gui what so ever. And I was wondering if I install the x-window-system-core + kde not the kubuntu desktop will I still need to install KDM as well as a package manager? Or would I just be better off installing the kubuntu desktop?
View 2 Replies View RelatedI've just installed Lucid Lynx and it seems to be running fine, except the synaptic package manager is downloading things incredibly slowly. Is this just because the server is busy due to the new release?
View 4 Replies View RelatedIn a moment of temporary insanity I tried to install Backuppc using the synaptic package manager, but started to panic when the installer tried to set up an Apache web server on my PC (which I do not want). At that point I tried to cancel the installation, but got an error message. I then marked the package for complete removal in the package manager, but every time I click the apply I get an error message, "E: backuppc: subprocess pre-removal script returned error exit status 2" and the package, which did not install correctly in the first place, refuses to go. When I ran the update manager today, to install the latest updates, the manager tried to continue with the Apache installation stage of the Backuppc installation. How do I get rid of it?
View 2 Replies View RelatedEvery time when I click on reload button in synaptic package manager I get these messages:
W: Failed to fetch http://in.archive.ubuntu.com/ubuntu/...ty/Release.gpg Could not resolve '1@192.168.0.4'
my internet connection has http proxy with address 192.168.0.4 and port no. 3128. every time when i click on reload button in synaptic package manager i get a lot of above messages. btw i am using ubuntu 9.04.
I'm getting the following error every time i run the package manager to install or update etc..
Code:
E: nxserver: subprocess installed post-installation script returned error exit status 1
Despite the error, apt still works and allows me to install/remove apps.
The application in question also works fine too.
I am trying to access my package manager. However it tells me that is unable to access it. Is there a fix for this?
View 5 Replies View RelatedI just installed 32-bit CentOS 5.5 in a Vmware virtual machine. I'm unable to install RPMs from either the graphical U/I (Pirut) or CLI (Yum). Pirut stops responding (no screen repainting) after displaying the "Updating software" dialog; Yum gets to the display of "Running Transaction" where it hangs. The initial installation (from the net-install ISO) obviously succeeded, and the after-install update of about 50 packages also worked fine.
yum.log contains nothing past the entries made during the initial install. Because I had a problem with corrupted files from a mirror during installation I tried using the baseurl setting in CentOS-Base.repo instead of mirrorlist, but that had no effect.
i downloaded packages of java and amsn but i cant see them in the synaptic package manager.when i search them i cant find and when i click file--> add downloaded packages ,it doesnt take this packages.
View 4 Replies View RelatedWhenever I try to install a program by Synaptic Package Manager, it downloads packages but it doesn't install those.It tries to connect to downloads.openwrt.org but unables to connect because of connection time out. I have attached a screenshot of it.
View 7 Replies View RelatedI tried to install gstreamer through Rhythmbox but only got a "Fix broken packages first" error message. I tried to fix the broken packages in the Synaptic Package Manager but it said there were none to be fixed. I tried to install the gstreamer stuff from Synaptic Package Manager and got this message
Quote:
gstreamer0.10-ffmpeg:
Depends: libavcodec52 (>=3:0.svn20090303-1) but it is not installable or
libavcodec-extra-52 but it is not going to be installed
Depends: libavformat52 (>=3:0.svn20090303-1) but it is not installable or
libavformat-extra-52 but it is not going to be installed
I then tried to install libavformat-extra-52 and got this message
Quote:
libavcodec-extra-52: Depends: libgsm1 (>=1.0.13) but it is not installable Depends: libschroedinger-1.0-0 (>=1.0.0) but it is not installable I couldn't find either of the packages contained in the last message.
I was planning to re-install ufw. When I selected it and then install in Synaptic Package Manager a box appeared saying ufw was not authenticated.
View 2 Replies View Related