I'm shopping for a Bluetooth dongle and I'd like to find one that "just plain works" with Lucid. I've searched and found a few posts about bluetooth, but nothing encouraging so far. Hopefully someone is using one and can vouch for its compatibility with Lucid.
View 6 Replies
The bluetooth manager does not detect a bluetooth dongle .trying to use ndiswrapper to fix.I installed device manager and the results are shown below.i downloaded the windows driver suite. It has 4 .exe self extracting driver archives and a setupconfig.ini. The .ini file is below.I was able to extract one of the 32bit archives on a windows machine and it had about 8 .inf files that are titled weird and would not install properly using ndiswrapper probably because im using the 64-bit architecture. there are 2 64bit .exe's in the driver download, but how can i extract them in ubuntu and do i really need to install all 8 .inf files. also do i actually need to make a .inf file? if so how?
Asus - BT211 mini bluetooth dongle
Code: http:[url].... - windows driver under download section.
Device manager
Code:
Model: Unknown model (id =0x3000)
Vendor: atheros Communications, inc[code]....
I have a laptop with no bluetooth on it.So i bought a bluetooth dongle.It works flawlessly under windows but i am having a problem with it under Ubuntu (As well as other Linux distros). As soon as i plug the dongle i see a bluetooth icon in the Notification Area.
When i click on it and choose setup new device....its scans and shows all the bluetooth devices like my Nokia 5800 xpressmusic cell phone but when i try to pair it simply fails....
I have tried all the Pin codes available and even tried the custom pin option but still no success. By the way right now i am using Ubuntu 10.04..i have also tried it with other linux OS but still the problem remains....
I recently purchased an inexpensive bluetooth dongle for my laptop running lucid 64-bit. the device, however, doesn't seem to want to work in ubuntu. most functions (everything but turning the device OFF) fail, causing gui windows to hang, and i mostly receive messages relating to the device timing out.
Before you ask, it is not the device: the dongle works flawlessly in windows 7 after being autodetected and autoinstalled. i attempted to boot from the lucid cd, and the problem persisted.
Code:
Code:
Decided to upgrade my usb bluetooth dongle because it is slow, old and bulky. Bought a Konig (broadcom) mini dongle. Ubuntu (natty) shows me a bluetooth icon and appears to be working. But: It doesn't find anything, nor can it be found...
lsusb:
Quote:
It looks like there is no module loaded for it. Does there need to be?
lsmod:
Quote:
I need a WiFi dongle for Ubuntu and most people at the shops only know if its compatible with windows
View 2 Replies View RelatedI had a lot of problems at first working this one out. So I made a program to create the bluetooth com port.
1. Download and install the program sjdsoftbt-tool from my website[url] or directly here *sjdsoftbt-tool*
It was made in gambas 2.0 but it should install the required dependencies automaticly .
2. Follow the instruction on my How to Guide this covers most phones and there pit falls and problems you can have.
based on the HW compatibility list, I bought a Conrad "Bluetooth Stick Micro" (Order number 97 19 99) => Does someone know, if this is "really" the one mentioned in the compatibility list ? Can I find out, what chip(set) is used ? (I'm somewhat "afraid", that the name might be the same, but the chip(set) changed. No, it is unfortunately not mentioned in the documentation coming with it) Unfortunately I didn't get it to work on Suse 11.2 (64 Bit) so far. This is what I tried: Installed bluetooth packages, based on the information I found.
These are:
root@godot:~ # rpm -qa | grep -i blue
bluez-gnome-1.8-9.4.x86_64
kdebluetooth4-0.3-9.1.x86_64
bluez-4.56-1.1.1.x86_64
[code]...
I looked for a bluetooth section in yast2, but couldn't fine one. (I think I saw one in earlier releases...) => Did I miss it ? Do I miss a package ? (I checked all packages containing "yast" for something.) So, with no yast2 module present, how do I do the basic configuration ? The documents I could find all describe how to use the bluetooth connection, if the basic setup suceeded.
I'm lookin to buy a usb bluetooth dongle with A2DP protocol.
I'm not asking how to configure the adaptor, that will come in time. I only want to know if someone has something like this working in linux.
I bought this bt dongle, and when i plug it, the operating system detects it and everything seems to be working fine. Although, When I search for devices, neither my phone nor my laptop are found. Searching for devices on both of them doesnt find this computer either. lsusb output is : Bus 002 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
hciconfig -a output is:
hci0: Type: BR/EDR Bus: USB
BD Address: 00:15:83:11:F7:58 ACL MTU: 384:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
[code]....
I am very new to linux and I have been given a school project that involves getting my windows pc talking to a linux single board computer that I have. It can be found here. [URL]. I have two bluetooth usb dongles, one to plug into my pc and one to plug into my linux board, I know that both work as I have tried talking to them both using my mobile/cell phone. Also when I plug the dongle into my linux board it recognizes something has been plugged in. However I am unsure where to go from here. I have tried "searching" for the device using my windows pc, but it will only find my cell phone and not my linux board. I also tried mounting it similar to how i would mount a usb drive e.g. mount dev/sda etc. How to setup the linux board for bluetooth communications?
View 14 Replies View RelatedI purchased 2 CSR V4.0 dongles which work fine, one in Deb8 and one in a Win7 laptop. The only problem is they both have the same mac address so my Samsung Tabs get confused. I have thoroughly researched how to change these but most of the suggestions want a dev reference such as wlano or eth0 which USB dongles do not have a dev id.
The only alternative is to use bdaddr which comes with the bluez package but it must be compiled with the --enable-tools option.
When I try to compile I get the error "error:D-Bus library is required". When I check the config.log it suggests:
"Package dbus-1 was not found in the pkg-config search path. Perhaps you should add the directory containing `dbus-1.pc' to the PKG_CONFIG_PATH environment variable".
Dbus is installed on my system but I could not find dbus-1.pc. The only reference was the directory "/usr/share/dbus-1" so I added it to my $PATH variable. This did work.
I just bought this USB adaptor and it does not work. I looked into "dmesg":
lsusb:
I am almost sure that it does not cost to spend time on this piece of equipment, but before I'd like to do minimum problem determination on this subject.
I'm running Slackware with 2.6.26 kernel. I've got bluez-utils,libs version 3.26 (Slackware 12.1 precompiled package), and kdebluetooth. I'm using a Digicom Palladio Usb Bluetooth adapter. In general, bluetooth seems to work; I can send files to my Nokia phone. Now, I've got this Bluetooth stereo headset (brand rather unknown, and I've thrown the package away, I've only got the little user manual, and there is no indication on who built this thing).
This is what I've tried so far:
- turn the headset on and turned pairing mode on;
- kbluetooth -> Configuration -> Input devices (input?) -> Search;
- kbluetooth finds the headset and asks that I insert the pin code; a little star appears next to the name of the headset ("Stereo Headset"), but after a couple of seconds disappears and at the same time I hear a beep coming from the headset (disconnection?). Anyway, just before the beep, noise came from the headset (as if it had turned on), then, after the beep, nothing.
- Important thing: the headset manual says the Usb dongle must support A2DP and AVRCP. I don't know how to find out whether my dongle supports them, anyway, if I execute 'sdptool', in the "Services" section I get: [Code} ....
Does this mean that bluez/my usb dongle doesn't support A2DP? Anyway, I followed the instructions on "Bluez - Trac - AudioDevices" [URL] and added the specified part to .asoundrc. Of cource, even if I tell xine to use "bluetooth" as pcm device, it says the device is unknown.
I've an Acer Aspire One A110 Netbook running Linpus Lite. All seems relatively well however I've plugged in a Bluetooth USB dongle and nothing has happened - oh well, I didn;t expect it to. Of course I'm used to MS Windows OS plug 'n Play and I know this isn't generally how Linpus Lite OS operates but despite looking around I can't find an explanation on how to activate the Bluetooth adapter. There are instructions and demos on how to add a Bluetooth component to the board but I'm not an engineer, neither professional nor hobbyist, so Im not interested in doing that. I've downloaded the Bluetooth zip file from the Acer Spire One support site it has been installed on the Netbook but there still appears to be no Bluetooth connection.
View 8 Replies View RelatedI purchased a ASUS USB-BT211 Bluetooth Dongle and I'l like to get it to working in Debian 6.0 Squeeze 64 bit.
uname -r gives....
I plugged in the USB Dongle:
lsusb gives....
lsusb -v -d 0cf3:3000 gives...
cannot read device status, Operation not permitted (1) larry@debian:~$
What do I need to do to get the Bluetooth Dongle Functional?
my Bluetooth Dongle from Sitecom Model CN-502 doesn`t works under openSUSE 11.2.I plug it into USB but no Reaktion. Under 11.1 it works?
View 1 Replies View RelatedProblems with Bluetooth. The dongle appears to be working, but then it craps out on me after only a few minutes!
I'm using the blueman-manager GUI to connect to my cell phone. If I load blueman-manager almost immediately after connecting my dongle, I can use it for a few minutes, but only long enough to add my phone, pair it and mark it as trusted. Certainly not long enough to send or receive a single file, though. Eventually and inevitably, the connection breaks, blueman-manager hangs/freezes up, and I start getting errors in dmesg.
Here's all the relevant diagnostic stuff...
Code:
Code:
Code:
I added the MARK myself to separate where the dmesg output stops immediately after plugging in the dongle from what appears after the connection is broken. It's right when that timeout error happens that the connection severs itself, and the error usually repeats itself several times.
Even if I just connect the dongle and not do anything except wait a few minutes, after a few minutes that timeout error will still happen. I'm running fluxbox and I don't believe I have any automounting programs, so there wouldn't be any interference from something like that.
I bought a laptop equipped with a 3DSPwireless network adapter, but I did not get a compatible driver, the one which I found on the company website (which is in Mandarin, I do not understand) seems to only work on a specific version kernel in ubuntu. This week, I came in contact with the support of 3DSP and got some sources to compile, but gives some errors, and I do not have much experience to solve them alone. Look at the output:
[Code]....
OpenSuSE 11.3/KDE4 32-bit
Kernel 2.6.34.7-0.7-desktop
It's been a while but I just hit a brick wall. Well, this has been building for a week or so, I can't figure out what's causing it. I thought there was a sudden conflich with the bluetooth dongle, since that one piece of hardware is not listed right from boot (sometimes has a dmesg error related to loading the module), but I find now this is not the case. Today I ran the full update to the current kernel hoping to fix the problem, but to no avail (caused some interesting issued with the video (intel 945) which I ironed out). Symptom: With the exception of the bluetooth, all devices hooked up to the USB ports at boot are recognized and usable. No device that I plug in after booting is recognized, period. lsusb output does not change. Plugging in a USB flash drive produces no output for dmesg.
[Code]...
could anyone here report from experience which WIFI USB dongle "just works" with Centos 5.2?
Did you test a webcam which is immediatly recognized by ubunty 9.10 and works well on skype?
View 9 Replies View Relatedi have a bluetooth modem (BlueSMiRF) that is connected to Arduino Duemilanove. I am trying to see serial communication messages from the bluetooth modem.
I have Blueman Device Manager that enabled SPP (Serial Port) and it says :
Code:
Serial port connected to /dev/rfcomm0
How do I see the serial communication on this?
I tried on console
Code:
$rfcomm listen 0
but it's stuck at
Code:
Waiting for connection on Channel 1
Is there any other way to listen (and also send) to serial comm msgs on bluetooth?
When i connect to my laptop a bluetooth usb stick, the bluetooth could not be turned on.
the bluetooth dameon is on, and when i press the turn on button, nothing happens.
in windows the stick works fine.
I am trying to connect my samsung mobile to a laptop, with bletooth. In Ubuntu it worked normally. I have installed opensuse 11.3 KDE and tried to connect when KDE bluetooth module gave me an error that my mobile does not support services. I have solved the problem by installing nautilus from official repo and blueman from factory repo and now I can connect to my mobile with blueman and browse the files with nautilus. Is there a known problem with bluetooth and kde or something is wrong with my opensuse?
View 4 Replies View RelatedI want to buy a wireless dongle to establish a bridged connection in my home. I mean, does anyone have a wireless dongle which works perfectly for Karmic without ndiswrapper? Some of the information in the Ubuntu help page is outdated.
View 1 Replies View Relatedused to use my 3 skypephone s2 as a mobile dongle with windows 7 - trying to use it with ubuntu netbook and its not seeing the phone, instead shows as amoi technology with a code of 0x1000, is there any way round this as the phone registers its connected and will show up as a mass storage device if i select it from the phone but wont connect otherwise.
View 4 Replies View RelatedCant install my wireless network with kubuntu...tried with cd bt cant work
View 1 Replies View RelatedI bought a mobile broadband dongle from 3 network. Naturally it's only compatible with Windows and Mac OS. How do I get it to work with Ubuntu?
View 9 Replies View RelatedAt the moment I am in the UK using broadband but in a week I will be flying back to India, where I normally connect with a 2G dongle. This comes with its own software that installs when plugged in for the first time and uses an Airtel sim card. Of course this is in Windows so what's going to happen when I go back and try and connect using Ubuntu? I have done a cursory search and note that I should use the Network Connections service, but this relates to 3G, not 2G. Will that make a difference? Is it a suitable replacement for the normal software my dongle installs? I should add that using a Bluetooth phone with the sim card is not practical, I do need to use the dongle.
View 2 Replies View Related
