Ubuntu Networking :: Wifi Card Recognized No Signal
Jul 25, 2011
I have discovered the world of freewares not long ago and it surprised me! To go a bit further, I have installed Lubuntu 10.4 LTS on an old laptop: HP Pavilion zv5326 with 256 Mo RAM.
Everything works fine except the wifi.
iwconfig returns for wlan0:
IEEE 802.11b ESSID:"Livebox-afe5"
Mode: Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry Long Limit:7 RTS thrff Fragment thrff
Power Managementff
Ifconfig returns nothing for wlan0
From what I understand, my wifi card is recognized so I do not need to install a driver with ndiswrapper, right?
What should I do then? Is there a solution at all?
(Livebox-afe5 is the wifi connection I use with my other laptop.)
View 1 Replies
ADVERTISEMENT
Jul 13, 2010
i just thought the last few days about trying Ubuntu. so i did. i got a nice and fresh copy of Ubuntu Desktop version and installed it, everything worked great except my wireless usb 2.0 card. the only internet connection i have under windows is Wifi and i hoped that my dongle will be recognized by Ubuntu automatically...(naturally, it wasn't the case.)
so my adapter looks exactly like this one here, except for the color, it's white and it has my WISP's name written on it (i got it from them, along with a cd that offers win xp/98/me drivers...)
so even everest sees it's atheros and it's the Atheros AR5523 chipset.
i also have windows 7 64bit drivers if they help...
anyway, i can't get it to work and cannot access the internet any other way when on Ubuntu, so i have to use an already-saved driver..
View 3 Replies
View Related
Apr 1, 2011
so I had to reinstall Ubuntu.But now my Wireless card won't work. It used to work before (plug and play), and I have no problem with it when I boot from the CD.I cannot use my cable connection because as soon as I plug my computer in, the network crashes, the router doesn't respond, gets hot and refuses to work until I unplug it and let it cool off for 2 minutes.I'm using Ubuntu 10.10, Desktop PC.
Code:
:~$ lsusb
Bus 001 Device 002: ID 0846:4260 Netgear, Inc. WG111v3 54 Mbps Wireless [realtek TRL818B]
[code]....
View 2 Replies
View Related
Feb 9, 2009
I have a problem to configure my wifi card, a dwa-110 from D-Link, it is not recognized when I launch System / network device control (only ethernet connections appear), and it is the same thing in Administration / network / network configuration. But if I launch administration / hardware / system devices, the last line is "Ralink 802.11 bg WLAN"... When I try to add in the window "network configuration" (from above) some new stuff, I specifying the kind of hardware (wireless) and when I have to enter the name of the card I don't see my card. On other OSes, I used ndiswrapper, but I wasn't able to install it on CentOS (dependencies required and it's hard with only a USB key to install the stuff...) How to see if the card is recognized, if I have to use ndiswrapper and so on. I have an internal PCI network card also, maybe it is this card which is recognized.
View 2 Replies
View Related
Dec 21, 2010
I've installed Ubuntu 10.04 on my IBM thinkpad a30p.
now everything seems to work fine, except for the wifi card (edimax ew-7708il) i have.
PCMCIA modules are loaded, but the card just doesn't appear in the network devices...
View 9 Replies
View Related
Sep 12, 2014
I'm a brand new user of Debian, and I just bought a (too much?) new laptop, the HP 430 G2. It seems to work great for almost everything, except that I don't have any wifi available.
I tried so many different things (without any success) that it would be hard to resume. But for now, all I have is a new installation (to avoid parasite installations of weird things), and a kernel updated to 3.16. I don't know if it's useful though...
Some information from my system :
Code: Select allbonyhoax@bonybook:~$ sudo ifconfig
[sudo] password for bonyhoax:
eth0 Link encap:Ethernet HWaddr 14:58:d0:09:72:bd
inet adr:130.125.57.144 Bcast:130.125.57.255 Masque:255.255.255.0
adr inet6: fe80::1658:d0ff:fe09:72bd/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:27329 errors:0 dropped:0 overruns:0 frame:0
TX packets:3491 errors:0 dropped:0 overruns:0 carrier:0
[Code] ....
The first element I notice is that I don't have the line with "Kernel driver in use...". Which seems to indicate that there's a problem with the kernel module (is that right?). But I don't know how to fix it...
The other thing that puzzles me with these last two commands is that according to this page, my wifi card is a Broadcom BCM43142. But it's not the result I get with the lspci command.
Anyway, I'm really lost, I don't know what to do, what to check, what to install. I don't want to go by random, testing all the different solutions I see on the web blindely. This is the reason why I ask it here.
View 7 Replies
View Related
Jan 15, 2010
I was running windows vista 32 bit (NOW UBUNTU 9.10) on my custom built pc with a TP-LINK TL-WN353GD wireless pci card, before on vista my wifi signal strength would be in the low 70% range with a speed of 54 Mbps from a access point roughly 250 yards away, now with ubuntu 9.10 signal strength in the 15-20% range with a speed of 1 Mbps. My question is, what is the best way to overcome this wifi signal strength and speed problem, it is a noticable performance disadvatange easily seen on a website like ..... where as before videos would play 95% of the time without having to stop and catch up, would a different wireless pci card be a better choice than what I have, or is the problem in the software as in a driver incompatability or lack of correct driver, not sure how to remedy the problem.
View 4 Replies
View Related
Feb 9, 2010
i'm surrounded by concrete block wall but have found an unlocked wifi signal. but i need to do something to help boost the signal. my HP laptop has a built in wifi card and i'm looking for something that i could use or do to help boost the signal.
View 2 Replies
View Related
Dec 7, 2010
I just installed 10.10 on a Dell Inspiron 1300. The wired connection(eth0) works fine but I get no wireless signal when I unplug and try to connect to my network/internet. It shows that wlan0 does exist but it gets no signal. I've used the rfkill to make sure that it wasn't blocked and everything seems to be ok, except I get no wireless signal.
I uninstalled Network Manager and installed Wcid and it found nothing. I even tried installing several signal scanners I found in the package manager. I've removed, updated and reinstalled the broadcom drivers. I still get nothing. The wireless signal from my router is nonexistent according to Ubuntu.
The wireless works fine when I put my windows XP HD in and it also works fine when I put my Mepix or PCLinux OS HDs in the laptop. So I know that the wireless card is not busted.
View 3 Replies
View Related
Aug 31, 2010
I'm using 9.04 on a laptop .when i was useing windows I got strong full bars for the wifi signal strength. On the same laptop in the same location, I get only 2 bars (low) wifi signal strength when I'm in Ubuntu 9.04 I'm using the wifi transceiver built into my hp Anyone heard of this problem?
View 5 Replies
View Related
Mar 23, 2010
my laptop can't find the wireless signal of my university's wifi. My room is a bit far, so I wonder if there are solutions for this.
View 1 Replies
View Related
Jul 6, 2010
I have been using windows 7 for awhile now, and i was using connectify (an internet connection sharing program that turns your laptop into a wireless router), and i'm planning on completely switching to Linux from a dual boot, and i was wandering if there is a way to share an internet connection (mainly to my PS3) on Ubuntu 10.04 x64, and wirelessly if possible, though i wouldn't mind if it was through Ethernet.
View 1 Replies
View Related
Dec 12, 2010
I've got a Belkin F5D8055 v1 wifi usb adapter. I use the rt2800usb driver for it. Strangely it uses only 54 Mbit/s instead of 300 Mbit/s. I thought it was ok, since I use the wifi only for accessing the internet. However, the network manager keeps dropping the signal, and I can't understand why. I'm close enough to the router.
iwconfig:
wlan0 IEEE 802.11bgn ESSID:"MyHomeRouter"
Mode:Managed Frequency:2.447 GHz Access Point: 00:22:2D:06:2C:50
[code]....
View 2 Replies
View Related
Jan 1, 2011
since the upgrade i see all avaible wifi networks as they have 100% signal, both in NetworkManager and Wicd.in iwconfig and iwlist the signal levels change, but the link quality remains the same: 70/70 (see below). What could be worng? What can i do?
comp. model:
msi wind u100 netbook, ubuntu 10.10, kernel: 2.6.35-24-generic i686
lspci:
Code:
02:00.0 Network controller: RaLink RT2860
Subsystem: Micro-Star International Co., Ltd. Device 6890
Physical Slot: 0-1
Flags: bus master, fast devsel, latency 0, IRQ 17
[code]....
View 3 Replies
View Related
Apr 25, 2011
I see the Wifi Signal Strength icon on the top bar, but where's the label that shows the signal strength percentage? Is there a way to re-enable the label or did Canonical deemed it to be unnecessary?
View 3 Replies
View Related
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
View 4 Replies
View Related
Apr 21, 2010
I've been having 2 issues with my internet connection on ubuntu for as long as I can remember, I've tried updates but they haven't seemed to work so great and am pretty fed up with this. So I have a Netgear wg111t wireless usb dongle which I got working through ndiswrapper. The 2 issues I am having are:
1. After a random period of time my internet just decides to disconnect, the strange thing is the bars at the top still say I'm connected. The only way to get the internet working again is to turn the pc off and on. Another way I have experienced this happening is usually when I'm downloading something off a torrent.
2. After restarting my pc the wifi usb isn't recognised and I can't connect to the internet.
View 6 Replies
View Related
Jun 15, 2011
I discovered that the wifi usb dongle i used for years went bad so i got an asus dongle that i cant get working.Might it be because my system is looking for my old one and the new one isnt being recognized? (e.g.wlan setting?)
View 4 Replies
View Related
Feb 12, 2010
this isnt happening on ubuntu but I think this is more or less a kernel problem that could happen with any flavor. After a new install off of a live cd my wireless card is not picking up any signals...i was able to use wireless while using the live cd but now after it has been isntalled to the hard drive it is not working. even tried in terminal to manually look (iwlist wlan0 scan) but it isnt picking up the signal
View 2 Replies
View Related
Feb 7, 2010
I just installed and Ubuntu doesn't recognize my wireless card HP dv2945se. I can get a wired connection. I can't figure out what kind of card I have (did the terminal command line, have no idea how to read it) or how to install a driver for this OS (HP's site just lists drivers for Windows). How to get the wireless card recognized?
View 9 Replies
View Related
May 23, 2010
Someone had just given me a pc with no OS so I installed ubuntu 10.04. The pc has a wireless card but I cannot seem to get the OS to recognize it. My wired connect is fine but wireless is non-existent.
View 7 Replies
View Related
Jun 8, 2010
I'm trying to proselytize and have installed Lucid on my receptionist's Gateway M500 with an Orinoco PCI Mini wireless card.
The card works in XP, but when I boot into Linux, the network card indicator light doesn't turn on, and lspci gives me this:
No wireless card
Pressing the on-off wireless button does nothing.
What can I do to turn on the modem so that Lucid sees it?
View 4 Replies
View Related
Jan 9, 2011
I have lucid installed on my hp laptop without any problems, and I went to install it on another hp but the I can't connect to any wireless network. I tried to follow this thread's advice [URL] . Because it's pretty much the same problem except I think the wireless card is from a different Intel family but it didn't work.
Basically wireless networks won't show up, in fact the network icon only has "wired" as a menu option.
I tried to follow the thread, even though I had no idea what it was saying as far as instruction goes.
View 9 Replies
View Related
Jun 5, 2010
I just installed 10.04 on my EeePC 1000HE, and wireless isn't working. My card isn't listed when I ifconfig. I've messed around with installing the Windows drivers, but nothing has worked so far.
If it's useful, I popped off my battery and it said something about the wireless controller "NE766".
View 1 Replies
View Related
Jul 17, 2011
I installed Ubuntu 10.04 on my new Sony Vaio series S but it does not recognize my wireless card (I think). The button is on, but the light does not turn on, and it does not detect the wireless card. The wireless card, an Intel Centrino Advanced -n 6205, does work in ubuntu and when I run the command: lshw -C network, it appears UNCLAIMED, that I think it means the drivers are not in the Ubuntu libraries. What can I do to make it work? I've been struggling but I cannot make it work.
View 9 Replies
View Related
Jun 2, 2010
I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
View 7 Replies
View Related
Jan 10, 2010
I see there is a driver module for network card in my system. I have 2 identical network cards in my system the 1st one works well, but the second one.. My system refuses to create interface on it.... lspci
[Code]...
View 3 Replies
View Related
Dec 26, 2010
I'm working with 10.10 (Maverick) on an older Compaq laptop. Wireless card is a Cisco Aironet 350. This card is listed as supported and drivers included in the server distro.
During the Network configuration portion of the install, I selected eth1 (wireless); the card came active and a valid network connection was established.
However, after the full server installation the interface (eth1) is not seen.
What's confusing is that modprobe -l shows the drivers as present:
kernel/drivers/net/wireless/airo.ko
kernel/drivers/net/wireless/airo_cs.ko
Insertion and removal of the card is noted in /var/log/messages:
pcmcia_socket pcmcia_socket1 pccard: card ejected from slot 1
pcmcia_socket pcmcia_socket1 pccard: card inserted into slot 1
(I'd be happy to supply more info, but currently set up with Fluxbox and I'll be darned if I can get copy from the xterm to paste into Firefox...)
View 1 Replies
View Related
