Ubuntu Networking :: WiFi Web Based Login
Sep 1, 2011
I need to connect to a WiFI hotspot using web based login let me explain the steps that I follow to get connected in Windows and please let me know the steps to be followed in Ubuntu.
Steps that I follow in Windows
Step1: Scan for wireless network
Step2: Connect to the wireless network of my interest (unencrypted). At this point I am connected to the wireless network.
Step3: Open browser and type some website I am redirected or in some browsers need to click the warning to go to the NAC server and enter my login and paswword.
After successful login I can start browsing the Internet.Please let me know the steps to be followed in Ubuntu(scripts or CLI appreciated since I use Ratpoison).
View 1 Replies
ADVERTISEMENT
Oct 23, 2010
i just installed backtrack 4 and had some noob doubts. I am having a Dell Vostro 1510 laptop.
[code]...
View 1 Replies
View Related
Jun 15, 2010
Im trying to find a text-based browser that would allow me to send my user and pass to a site so it would auto-login. The thing is, Im trying to grab text from a site that requires authentication.I have looked at lynx, but I have problems connecting to https (apparently, the site uses an invalid cert).
View 2 Replies
View Related
Mar 4, 2011
I have a script I want to execute after successful login for users who are members of a specific group. Ubuntu server 64 bit, 10.04. Where could I accomplish this?
View 5 Replies
View Related
Jul 20, 2009
I'm migrating my file server from Fedora 9 to Fedora 11 (clean install), and I'm having a horrendous time trying to get key based SSH logins working. I've set it up before, and I can't figure out why it won't work now. I copied my public key into ~/.ssh/authorized_keys2 and set the folder permissions for 700 and the file permissions for 600. Then I restarted sshd. Now unless I remember wrong I thought that's all you have to do. It didn't work. So I rebooted just for good measure. Still didn't work. So I made sure that my client was still sane. I can log into my OpenBSD machine just fine. I compared the sshd_config from OpenBSD to the Fedora one, and the options seem pretty close.
At that point I had nothing to lose and just started messing with the Fedora sshd_config. I also noticed in the config that the commented AuthorizedKeys file had dropped the 2 off the end, so I tried changing that as well. Still nothing. Password based logins work, but I really don't want to go that route. Now I can only think of two possibilities. One, some sshd_config setting is wrong and I don't know what it is. Two, there's some package that's required for key based logins that I accidentally unchecked during the install process. That's about all I can come up with. Here's my sshd_config, I tried to just set everything back to default.
Code:
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# Disable legacy (protocol version 1) support in the server for new
# installations. In future the default will change to require explicit
# activation of protocol 1
Protocol 2 .....
View 2 Replies
View Related
May 1, 2010
i want to deny certain users based on time to login to my machine i am using CentOs 5.0 any sugestions?
View 2 Replies
View Related
May 17, 2010
I have disabled password logins to a server.I want to transfer some files to it using a client like FileZilla but there was no way I could give private key to filezilla is there an ftp client
which supports key based login?
View 2 Replies
View Related
Oct 21, 2010
So if I get their public key for ssh how do I add and then how do I delete it my problem is in .ssh/authorized_keys file I do not understand how to add and how to delete the key so that I can enable and disable root login this way.I am not sure as how do I comment the key assuming that the person sends me his public key then in .ssh/authorized_keysfile how do I add so that a comment can also be added so that I can identify that person as a legitimate user.
View 1 Replies
View Related
Jul 3, 2010
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies
View Related
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
Mar 6, 2010
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
View 9 Replies
View Related
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
Sep 1, 2011
I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
View 2 Replies
View Related
Apr 27, 2015
I initially installed Debian 8 onto my iMac G5 (with KDE), and it would boot to a black screen. I then tried again, and reformatted+reinstalled with only "Standard system utilities", "Print server", and "SSH server".The boot hangs before I get to a log-in prompt. Please see the attached log files I pulled off by booting from the rescue CD option. (I got an error when attaching the log files, so I used tinyupload to upload the files.URL....
Here's some of "syslog"
Code: Select allApr 27 17:37:45 iMacG5 systemd[1]: Started System Logging Service.
Apr 27 17:37:45 iMacG5 kernel: [ 13.137638] Unable to handle kernel paging request for data at address 0x00000008
Apr 27 17:37:45 iMacG5 kernel: [ 13.137645] Faulting instruction address: 0xd000000002314488
Apr 27 17:37:45 iMacG5 kernel: [ 13.137654] Oops: Kernel access of bad area, sig: 11 [#1]
[code]...
View 1 Replies
View Related
Nov 22, 2010
I have setup SFTP and it is running without any problems. The problem I have is finding a client that supports key based logins through Linux. I do not want user based logins available and so far the solution works through my Windows machines using WinSCP. The only client I have found for Linux seems to be FileZilla but I have to convert my private key to the FileZilla format which removes the passphrase leaving it nice and insecure.
View 4 Replies
View Related
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
View 4 Replies
View Related
Apr 8, 2010
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies
View Related
May 13, 2009
the only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
View 4 Replies
View Related
Aug 23, 2009
I have an old PowerBook G4 that I would like to use as a 'dummy' computer for learning wireless penetration (WEP/WPA attacks) more effectively. I had been using a wireless router, but I gave it away I can use Mac OS X to share an ethernet connection over wifi, but this is _very_ un-configurable. You get two options only, WEP and a key-length. So, I would like to install someway to make this wireless connection more configurable.
View 2 Replies
View Related
Oct 2, 2010
I've got a recurring problem on the latest install of Ubuntu 10.4 64 Bit. Everytime I log in, in order to use establish a wifi connection I have to enter my password again to unlock the system keychain. Until I do this no Wifi connection is established.
I've got the system setup on an Acer Aspire Revo which has an RaLink rt3090 card in it. I was using the 2.1.3 driver but have updated to the latest .7 driver and still have them same problem but I suspect this is some sort issue with Ubuntu rather than the driver.
The machine is setup as an HTPC to logs in automatically and boots up Boxee which needs an internet connection so it'd be great to get the internet working from the get go rather than having to enter the password again.
Anyone got any ideas why I'm being asked to unlock the key chain again and to stop this from happening so the wifi works immediately after logged in.
View 6 Replies
View Related
Aug 4, 2015
I am trying to connect to a paid for hotspot service. There is no encryption for the wifi.
In Windows you connect to the hotspot, and then any webpage that you attempt to connect to results in you being redirected to their login page.
Once you have put a username and password into their page, the internet works. I know the hostname and IP address of the login page so actually I can go straight there if necessary.
With Debian I have tried Network Manager, WICD and command line iwconfig and dhclient.
With Network Manager or WICD the connection just will not start. It seems to connect to the hotspot then immediately fall off before you can go to the login page.
With iwconfig and dhclient I get mode Managed not-associated. Sometime dhclient seems to return an IP address sometimes not. I'm not sure if it's because it already has an address in it's lease lifetime.
I think that dhclients sends a ping once the connection is up to verify the link? But this will not work until the page is logged into.
Windows "just works" even warning you that you need a login page and then loading it. How I can use this wifi service with Linux?
View 8 Replies
View Related
Dec 13, 2010
I'm running Ubuntu 10.10 on my Precario Laptop I'm connected via WiFi to an Edimax BR6424-N and i cannot login to Msn and browsing is extremly slow as soon as i connect to any other network but myin everythings fine, Ive searched the web alot and found that i should down the mtu in linux so i did, from auto to 1350 and still i keep getting disconencted from msn and briwsing is just extremly slow, Im In the same room as the router so distance is not the issue...
View 1 Replies
View Related
Dec 24, 2010
If I understand correctly Ubuntu does not allow a wifi connection until a user loges in. That makes it so that prey (see preyproject.com) cannot send notices until someone has logged onto Ubuntu.what I would like to do (but I have no clue how) is to set up a user account that automatically, in the background, logs on at start up. Then this little user login would establish any Internet connection that is possible (wifi or lan) and start the program 'prey'. This should all be totally transparent to the user that would just see the regular log in screen.
View 4 Replies
View Related
Apr 24, 2010
I am working on a set up, and I like to be able to toggle compiz on and off, or toggle dualscreen on and off. The thing is, I also have conky on my desktop as well as a terminal window embedded in my desktop (that requires compiz). So, when I turn comiz off, or resize my desktop, I want to be able to reposition conky/embedded-terminal and the terminals position is relative to my conky position and the size of my virtual desktop.
I can do this all fine, except that to reposition the terminal I need to kill it then reopen it. But if I kill gnome-terminal it kills ALL gnome-terminals instead of just my embedded one. How can I specifically close my embedded one and leave any others untouched? Lets say that the title of my embedded terminal is "trans777"Also, the trans777 titled gnome-terminal will be killed when compiz is not running.
View 1 Replies
View Related
Jun 7, 2010
I notice that on DistroWatch, the descriptions include "debian based", "arch based", etc. For the newbie, is there any practical difference between the different bases, or is it a Coke vs Pepsi type question?
Is a distro based on Debian say, easier for a newbie to learn or work with than say one that is FreeBSD based?
View 9 Replies
View Related
Aug 12, 2010
I've got some source code that loads and plays WAV files through the OSS drivers (and USB audio). The code works even under 2.6.34. Is there any benefit to rewriting the code using the ALSA system?
View 1 Replies
View Related
Apr 5, 2010
When you use an IDE and it asks you if you want frame based or dialog based, what is the difference?
View 1 Replies
View Related
Feb 2, 2011
what distro should i use, rpm based or debian based?
View 2 Replies
View Related
Apr 5, 2010
I was asked to setup 802.1x Port Based Authentication for users connecting to a Managed Cisco Switch. From what I was told, it should work like this:
- User plugs workstation into switch.
- Workstation asks user for radius credentials.
- Workstation is then able to authenticate to the Radius server.
- After workstation is authenticated, the switchport then becomes unrestricted and allows the workstation to communicate on the network.
View 1 Replies
View Related
