Ubuntu Networking :: Wired Connection Keeps Dropping Out / Resolve It?
May 13, 2010
Two weeks ago I decided to ditch my XP install completely and switch to Ubuntu 10.04. So far so good, and I'm very happy with my decision. However, about 3 days ago, my wired connection started playing up. It keeps dropping out every 2 hours or so between 13.00 and 04.00. After dropping out, it immediately reconnects again (at least when I use Automatically DCHP config). From 04.00 to 13.00 it is more or less stable.
I tried resolving by reserving an IP in the DCHP Client Table in my router (linksys WRT120N). Additionally, I told the Network Manager to use the Manual configuration. Unfortunately these changes didn't help and the problems stay the same......
The daemon.log shows the following information code...
View 9 Replies
ADVERTISEMENT
Jul 11, 2011
I have an Ubuntu box, 11.04 x64, running on a Dual Opteron SFF box (iWill ZMaxDP... pretty old machine). Up until a few weeks ago, it was acting as a Windows 2008 Server, but i moved it to Ubuntu.
Anyway, the machine will not stay on the network for any amount of time, without falling off... I have changed network cards, cables, ports on the switch, etc, and nothing seems to work. I have a Windows 2003 box giving out DHCP addresses, and for a while, i actually tured that off and setup a second Ubuntu box to give IPs... it made no difference. The box gets an IP, and can ping outside for a bit (2 min or so) and then just looses connectivity... ifconfig shows it with an IP (i have tried both Static and DHCP config) and nothing seems to work...
[Code]...
View 1 Replies
View Related
Apr 30, 2010
using Hardy Heron on a old Thinkpad T41.This is a fresh install system and I noticed it kept dropping wireless connection. After google around, seems like this is a common problem? Then I switched to wired network, and turned out the same thing happens again. Looks like doesn't matter wired or wireless, it kept dropping itself from time to time.
fter checking syslog, I found something interesting...it kept complain eth0 is invalid, then it said it found a better connection?I found that extremely weird..
Code:
Apr 30 06:24:32 support kernel: [ 961.236895] e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang
[code]...
View 1 Replies
View Related
Dec 27, 2010
Lspci:
05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
My wired LAN keeps dropping randomly, average of every 30-60 minutes. Fresh install of 10.10 from iso, Been installed for about 4 days now, just performed system update today, no change.
My router actually completely resets itself. You can watch the lights power off and recycle doing their POST. Absolutely no problems in windows 7 dual boot configuration.
I am no downloading anything, not streaming, not doing anything actually. My computer is completely idle (save for BOINC) and all of a sudden my phone loses the wireless connection which lets me know that my router just reset.
Ubuntu is actually doing this, my wireless stays up indefinitely in windows. Once the router resets, it does automatically reconnect without a PC reboot, but why is it resetting my router?
If you need the bootscript, already posted here: http://ubuntuforums.org/showthread.php?t=1651262
View 4 Replies
View Related
Dec 7, 2010
I have just switch to Ubuntu on my laptop from Windows 7 and I am experiencing alot of wireless dropping.
The signal itself is full and I am very close to the router.
What could be the issue and how do I go about rectifying it.
Laptop: Dell 13z.
Wireless: Intel 5100 agn
Ubuntu 10.10 x64.
View 5 Replies
View Related
May 10, 2010
Lately I have been using my window's partition due to the fact that 10.04 drops my wireless signal every 5-10 minutes, but today I downloaded the new updates and that seems to have fix the issue with the dropping of the wireless connection. Now the only problem is the internet is so slow when trying to go to webpages it times out. I have opened up firefox gone to about:config and changed the necessary lines, but still dreadfully slow.
View 2 Replies
View Related
Nov 4, 2010
My wireless connection keeps dropping is very unstable, signal strength goes up and down here is the info i got from the terminal
*-network:0
description: Ethernet interface
product: 82801DB PRO/100 VE (MOB) Ethernet Controller
vendor: Intel Corporation
[Code]....
View 3 Replies
View Related
Feb 20, 2010
I have a windows installation (partition) but have installed into freespace on the same drive using the auto-partition manager, etc, and everything is fine. I got my network going fairly easily by going Preferences > Wireless and inputting SSID and WPA encryption key (PSK). My router issues an WLAN IP, I can get on the net, I can see my other Windows PCs on the network, I can reach my router, and all is good.So after several hours of mooching about and looking at things, I have updated all the Linux packages via Synaptics (following a prompt to update everything) including GRUB. My dual boot now shows two versions of the OS:
GRUB 1.7~Beta4
Ubuntu, Linux 2.6.31-19 - generic (I am booting this one)
Ubuntu, Linux 2.6.31-14 - generic
I also set up my HP F4580 printer over wifi on the network though with slightly incorrect drivers (for the F4400 series as this was recommended at the closest match). It works, and I can print a test page no problem.The only thing is that now (since doing all that) Ubuntu seems to periodically drop my connection to the network and then request the network PSK again, but when I enter it, it spends time trying to renegotiate but fails, and then re-requests the PSK, over and over and it never reconnects. I have to reboot and then I can connect again (automatically), until it drops at some random point (like 5 or 10 mins later)
View 9 Replies
View Related
Jan 10, 2011
I've just loaded the new Hamachi2 Linux beta with Haguichi for a GUI. Everything installed & connects OK, but the connection at the hub is dropping & reconnecting every minute or so. I tried adding a line to the sshd_config file to keep it alaive but it didn't make a difference.
View 3 Replies
View Related
Jan 5, 2010
Here's the situation: I've got an eee pc 901 running Ubuntu 9.10 netbook remix. I'm using it to connect to a WPA-encrypted wireless network on a WRT54GL running dd-wrt. It mostly connects and works ok, but sometimes it just stops working for no apparent reason (the netbook still shows itself as connected), but you can't get anywhere until you manually disconnect and reconnect. Other times, it will drop the connection, and then quickly reconnect (or sometimes not). Obviously, this behavior is pretty irritating. At first I thought the problem was with the router, but I checked the logs there and they all seem fine, and other computers on the same router don't have this problem. Looking at "dmesg | tail" on my netbook, I see a lot of instances of the following error, which I'm thinking is probably the problem:
Code:
[11137.762233] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[11142.872797] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 440
[11152.883274] ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 556
[11152.883529] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[11163.952056] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
I searched for that error message and I found this Ubuntu bug report: [URL] that describes symptoms that match mine. In that report, a poster mentions that he compiled and installed a new version of the wireless driver from the Ralink website, and it fixed his problem. Do you think installing a new driver would be good? Or has that updated driver already been added to the kernel since that bug report was filed? I've never compiled a kernel module before.
One other thing, I also see repeated instances of these lines (or similar ones) in dmesg, which look like they could be related.
Code:
[44096.275923] RX DESC f30ca000 size = 2048
[44096.276885] <-- RTMPAllocTxRxRingMemory, Status=0
[44096.281404] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[44096.281424] 1. Phy Mode = 0
[44096.281435] 2. Phy Mode = 0
[44096.309841] 3. Phy Mode = 0
[44096.314533] MCS Set = 00 00 00 00 00
[44096.316196] <==== RTMPInitialize, Status=0
[44096.316280] 0x1300 = 000a4260
[44096.401269] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44096.472502] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 116
[44096.472977] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44106.768056] ra0: no IPv6 routers present
View 1 Replies
View Related
Jan 20, 2010
as the titles states my wireless is dropping out but the networks manager is still saying i have a connection. the only way i have been able to be on the network every minute or so i have to manauly disconnect and reconnect to my wifi. under my windows 7 and vista installs the wireless card works fine now my card is a dlink dwa-547 and it uses the arthores chipset, it is encprtyed wifi, wpa2 aes on a n/g based network
Code:
peter@ubuntu:~$ sudo lshw -C network
*-network
description: Wireless interface
product: AR5008 Wireless Network Adapter
[Code]....
View 8 Replies
View Related
Oct 27, 2010
I have a Thinkpad W500 with:
Code:
Network controller: Intel Corporation Wireless WiFi Link 5300
I have Ubuntu 10.04 32bit installed:
Code:
Linux dani-laptop 2.6.32-25-generic #45-Ubuntu SMP Sat Oct 16 19:48:22 UTC 2010 i686 GNU/Linux
It has been working fine since I installed 10.04 but recently (end of last week I think) it stared dropping the wireless connection very often. So it will disconnect and reconnect, but I can't seem to find a pattern, sometimes it goes for hours without an issue and sometimes it does it several times in a row. Below is an extract of syslogs from when this happens. But not sure if what I need is there... the only weird thing I can see is:
Code:
Oct 27 18:58:33 username-laptop wpa_supplicant[1296]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Code:
Oct 27 18:58:32 username-laptop wpa_supplicant[1296]: Trying to associate with 00:1e:be:a6:c0:0f (SSID='accessp' freq=5280 MHz)
Oct 27 18:58:32 username-laptop NetworkManager: <info> (wlan0): supplicant connection state: completed -> associating
Oct 27 18:58:32 username-laptop kernel: [123835.372217] wlan0: deauthenticating from 00:1e:7a:6f:d9:90 by local choice (reason=3) .....
Oct 27 18:59:29 username-laptop ntpdate[4765]: no server suitable for synchronization found
View 6 Replies
View Related
Sep 26, 2010
I am running F13 on my Desktop (with a Ralink RT2870 wireless card) and also on my Laptop (Acer Aspire 5738Z) and am connecting to the internet via a NetGear router. On my Laptop I can connect to the internet fine with no problems. However on my Desktop when I turn my computer on it connects to the internet fine, and works, however after some time (maybe 5-10 minutes) it disconnects and the box asking for the password reappears, then I click connect but no joy.
The connection box just keeps reappearing and it won't connect again until I restart the computer (although sometimes it takes more than 1 restart!). This is not a signal issue, as my Desktop also has a Windows partition and that connects to the internet fine and does not drop off. I have installed the RT2870 driver through rpmfusion, which didn't fix the problem, although uninstalling the driver didn't stop the card from working.
View 1 Replies
View Related
Oct 17, 2010
I usually start up my Internet service by typing ./rc.inet1. While its connecting I usually see my routers ip address then I connect and I start browsing and everything is fine. A few times I noticed that instead of seeing the routers address it showed some other address and I could not get online. I try ./rc.inet1 stop and renew but still cannot connect, I reboot and I then see the router and I can connect. I am using slackware13, and opera10 browser.
View 6 Replies
View Related
Aug 8, 2011
Sorry if this has already been solved;answered anywhere else - I tried looking it up but to no avail. The problem persists & the hints I found around the forum did not provide a solution to the case, neither other net solutions i looked up I run Winblows at the lab and sometimes take my Ubuntu PC with me. There is an open Wireless network where they set MAC permission, and there's no pwd to access. It so should be fairly easy to change m MAC and access it, right! No. I run ifconfig and macchange, successfully change my MAC addr BUT the connection drops! Then if I change it back (MAC to my original address) it goes back online. And yes, I shut down the service -- "ifconfig wlan0 down" and then up..WHAT ON EARTH am I doing wrong??? No webpages touch this 'trouble-frigging-shooting instance!
View 2 Replies
View Related
Mar 9, 2010
I have a Dell Inspiron 6000 laptop running Fedora 12. Recently my wireless connection has begun dropping every few hours and not reconnecting. After trying for about 30-45 seconds, the WPA password prompt comes up but still doesn't connect.
Fedora release 12 (Constantine)
Kernel Linux 2.6.32.9-67.fc12.i686
GNOME 2.28.2
Memory: 2.0 GB
Processor: Intel Pentium R 1.60 GHz
View 14 Replies
View Related
Feb 25, 2010
As soon as i'm starting to copy a large file enough file (>700Mb) to my ubuntu box (connected to an Asus router via wifi) from a Windows 7 client (connected to router via ethernet cable) i get a dramatic drop in speed. upload starts at 1,0Mb/sec with a ping to ubuntu box at <1ms, and in 2 minutes it drops to 200kb/sec with a ping of over 1000ms! The ping increases with every second in a linear progression.
To exlude router as a possible problem copying to a windows 7 notebook connected to router via wifi results in an average of 2,7Mb/sec with an average ping of 150ms.
MB Model: Asus P5B Deluxe wifi
OS: Ubuntu Server 9.10 + desktop installed
Wifi configured via GUI
2. lsusb
3. wlan0
4. lsmod
View 2 Replies
View Related
Jun 1, 2011
I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
View 1 Replies
View Related
Jan 22, 2010
I have two PCs one has Windows XP the other has Ubuntu 9.10 on it, the Windows PC has no problems getting on the Internet (I'm posting this with it) and getting an IP address from the wired router. The wired router I have is ONLY wired it does not have wireless at all, it is currently setup to hand out IP addresses between 192.168.1.2 and 192.168.1.254.
The Ubunutu 9.10 PC worked great last night surfed all over the place for hours, then finally shut it down last night when I went to bed, shut down appeared to be normal like it always does when it shuts down, then this morning when I booted it up it gave error: "WIRED NETWORK - disconnected you are now offline".
View 5 Replies
View Related
Mar 15, 2010
I am using ubuntu in my new office, and I can't get the network working. The "official" OS installed was a Windows, and it has a special "dial-up" app for the LAN connection (not wireless). My network admin is apparently not helpful, since he actually knows nothing about the internals for the "dial-up" app (he did not even ever heard of TTLS, PEAP, MD5, etc), and claimed that no OS except for Windows can work...
Well, I have tested various configurations with my Mac laptop, and apparently the LAN connection requires 802.1X authentication, and it's using a very weird combination "TTLS+PEAP+MD5" (if I check these options in Mac OS X, the connection works). However, in NetworkManager, I can't select both TTLS and PEAP, and moreover, TTLS does not work with MD5. So, is there anything I could try?
View 1 Replies
View Related
May 17, 2010
Fresh install of UbuntuStudio 10.04. This is really bizarre.
I can't seem to connect to the wired connection mainly because there is no connections tab (pic attached).
Here's some printouts:
dmesg:
Code:
lshw -C network:
Code:
View 3 Replies
View Related
Jun 1, 2010
When I unplug the ethernet cable from this laptop and plug into my Ubuntu 9.10 Desktop I get a wired connection automatically but I have no internet connection in Mozilla
View 9 Replies
View Related
Aug 17, 2010
I've had a computer running Ubuntu connected to my TV for a few weeks now, but as of yesterday, I can't get it to keep a connection to the Internet. Everything works well for an hour or so after a reboot, but then no WAN connections work. When this happens, no sites load in Firefox or Chrome, I can't ping Google, I can't SSH to the box from work, and none of the pages I have running on apache load from remote computers. However, all local area connections seem to work fine. SSH from within my LAN takes much longer than usual, but it does still connect.
View 2 Replies
View Related
Sep 1, 2010
The situation is I have one machine just installed 10.04yesterday, and I plan to take it as FTP server sharing filesvia LAN and WAN as wellBut after setting up all network withNetwork-Manager found that my dsl connection willdisconnect while my wired connection was connected.
my network-manager setting process is:
1.wired tab:
IPv4:192.168.1.x
[code]....
View 2 Replies
View Related
Nov 1, 2010
I have a wired problem in Ubuntu 10.10, My Ubuntu can connect with Wireless network, however it cannot connect to Wired Connection. I installed dual System, one is Ubuntu 10.10, the other one is Win7. Under Win7, I can both connect to the Internet in Wired or Wireless mode.
The more wired phenomenon is: When I plug in the cable, I can see the icon connected in my network manager. But I cannot visit any URLs. By checking the "ifconfig -a", I can see the IP addr was assigned to my eth0.
View 2 Replies
View Related
Nov 19, 2010
connect to wired LAN in ubuntu 10.04? I think I have specified the IP address and everything correctly. But it says no connectivity. In windows it says connected but I am unable to open any webpage.
View 2 Replies
View Related
Dec 4, 2010
installed Ubuntu 10.04 on my Dell 1564. My cabled netwo connection is not working.buntu has been dual booted with Windows 7. Internet connection on Windows is working. I have an ADSL modem connected to my laptop via the cable.I have given the details of commands asked to be execute(viewed various posts).
isr@ISR:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
[code]...
View 1 Replies
View Related
Dec 16, 2010
I recently did a whole system wipe and got rid of windows all together!! Unfortunately, that means I have to start over with the whole networking thing. I know I have a bcm4311, but I have no idea what I have for a wired adapter. I know that I could search through everything to find what I need, but there is so much info for all the different versions. I have ubuntu studio. Can someone tell me the commands to type into the terminal to find out what I have for the wired network card and recommend a place to get the proper "drivers" to get my computer working again?
View 5 Replies
View Related
Jan 7, 2011
Running a wired connection through a Linksys router that suddenly stopped working today.I thought this was a ipv6 issue sinced I enabled some of those settings to share a connection with my PS3.I have since disabled IPv6 in Firefox and through the grub. The RealTek adapter will not even show a connection through the network manager when connected.The onboard adapter will show a connection, give me a ip address and MAC but still will not load the internet. I've tried uninstalling and reinstalling both adapters through the network connections, as well as reinstalling Firefox to no avail.I've also tried using Open DNS servers.I cannot ping through the network tools either. Hard for me to paste a ifconfig since I'm on my laptop.I'm running Ubuntu 10.10 (not dual booting).I did some updates this morning but it worked fine for a little while after that, until I tried to connect to my PS3.
View 3 Replies
View Related
Apr 19, 2011
i got wired connection using Ubuntu 10.10 and im new using ubuntu pls tell me where i must write the words not to write codes and i don't where i must do it.what is the best version of Ubuntu didn't had that problems?as i saw that Ubuntu 10.10 had same problem for all people.
View 3 Replies
View Related
