I was going fine yesterday and today I logged on and it seems as if my packets are being bundled up and sent at once, because websites spend ages loading, then all load together at the same time, my IRC lag bar increases and increases then pops back to 0 around the same time the web finished loading.
View 2 Replies
I was running a patch of my wifi connection and now i have NO wifi at all. I am totally lost right now. i have been running throught all the threads but nothing is really working. Is there a way do a full system restore (like windows) that will undo all my mistakes? my wifi has always worked until i screwed something up!
View 5 Replies View RelatedI'm having problem getting my Edimax EW-7711UTn to work (I'm stuck with using the ethernet cable for now). The light flashes on it and it picks up wireless networks, but when I'm connecting to them, I put in the key, it tries to connect, but the wireless key window pops up again and again and again. I've looked up other threads about this, but none of the suggested methods have worked for me (I've checked to see if it's compatible, apparently it isn't, but people seem to have got it working before...) I'm using a Toshiba Satellite M40 laptop. $lspci:
[Code]...
I need my battery/wifi/sound controls back on my panel. By accident(or bug) I deleted them all from my panel. Now when I go to "Add to Panel..." they, are not there to add back.
View 1 Replies View RelatedMy laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies View RelatedI have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
My computer has a 2.80Ghz Intel Celeron processor and 498MB of RAM and 3GB of swap space. When I use Fedora 11 the user memory increases over time and even if I quit all the applications the user memory still does not go down. It eventually gets so bad that have to restart my computer.
View 14 Replies View RelatedInstalled ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies View RelatedI installed ubuntu 11.04 on my dell inspiron mini 10. I replaced windows 7 starter but i want to change back as it keeps dropping my wifi connection.
View 9 Replies View Relatedget WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
I was wondering why after a couple of days of my ubuntu server running, that it goes from starting off at 94mb of ram usage all the way up to 498mb of ram usage?
View 2 Replies View RelatedI use an ATI card with proprietary drivers and my memory usage in ideal situations when idle is around 600-700 MB. I use cairo-dock, AWN, compiz, gnome-do, and GNOME (w/o panel). My problem is, I have mysteriously increasing memory usage over time, which drops back down after I restart all my openGL applications. It can get as high as 1.5 GB. Looking in top, the weird thing is that when I sort by memory, I observe that none of the applications I am restarting, nor Xorg, use a significantly smaller percentage of system memory after being restarted. So what is going on? Does fglrx have some kind of memory leak? And is there a fix? In the last 10 minutes, my memory has for no apparent reason increased from 700 MB idle to 775 idle, and is still going up.
View 2 Replies View RelatedIs there a way to avoid sudden increases in volume while watching movies? The problem is the difference between the volume of the dialogs & that of the special effects (example: firing of a bullet ,a car crash, a lightning strike & similar). Is there a way to limit the volume to a certain level ? I tried volume normalization filter of both vlc & smplayer. But none seems effective.
OS:Lucid 64
MM App :vlc , smplayer
Speaker Setup : 2.0 (Stereo)
I was trying to have a go at installing MAC on my dell alongside Ub and W7. I copied the grub2 to the first part of my sda5 so as to put the mac loader in MBR.I have since repaired grub2 back to MBR.But now my beloved Ubuntu starts up then continuosly increases RAM usage till 90% then SWAP 90% even when no application is running!!
View 2 Replies View RelatedI am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
When i change the directory using 'cd', the length of my shell prompt keeps on increasing. To make it more clear kindly see below
Code:
$> cd MyWorks
$ Myworks> cd Shell
[code]....
Is there any way to find out log files increases we will get automatic email alert. for example if the log file size is 2 MB once the file exceeded 2MB then we will get email alert. is there any script.
View 5 Replies View RelatedI have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies View Relatedthe only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
I have an old PowerBook G4 that I would like to use as a 'dummy' computer for learning wireless penetration (WEP/WPA attacks) more effectively. I had been using a wireless router, but I gave it away I can use Mac OS X to share an ethernet connection over wifi, but this is _very_ un-configurable. You get two options only, WEP and a key-length. So, I would like to install someway to make this wireless connection more configurable.
View 2 Replies View RelatedI just wanted to know if having my laptop set to ondemand, will this affect performance in any way? I realize it increases the clock speed to performance when the CPU is under load, but does the time it take to go from ondemand to performance affect speed? Will there be any noticeable difference between the two setups? I have a dual core intel at 2.2GHz when in performance. When ondemand is set with no load it downclocks to 800Mhz.
View 7 Replies View RelatedOkay so when a Windows Pops up for instance like Gloobus Preview, Docky Closes and I have to reopen it.
View 3 Replies View Relatedthis string of commands pops up when i try to boot up linux in any mode.fsck from util-linux-ng 2.16/dev/sda5:clean, 207703/1966080 files, 1500210/7859793 blocks (check in 2 mounts)i have no idea about computer stuff so
View 2 Replies View RelatedI just updated my netbook remix 9.10 to 10.04 and every time I boot up it freezes as soon as the login screen pops up. Before this said screen pops up I have the ability to move the cursor around freely, and if I mash the life out of enter I can get it to select my username, but freezes before the password entry bar has the chance to come up under it.
View 1 Replies View RelatedI've tried iok, cellwriter (a cracker) and a few others but what annoys me is that I can't seem to find a way to get them to vanish and only pop up when a text entry box is clicked into (wii web browser stylee). Is it possible, or am I barking up the wrong tree?
View 3 Replies View RelatedI just installed Ubuntu (10.10) via USB. Installation went perfectly, and then I installed videocard drivers. I restarded and from then when I boot, some kind of command line pops up and wants me to login from there. I did, and ive also looked at this thread: [URL] and tried to restart GNOME but didnt work
View 6 Replies View RelatedI'd like to configure the unity bar that way, that when i move my mouse to the left of the screen the bar pops up -immediately- and not with 1 sec delay. Is that possible somehow?
View 3 Replies View RelatedI finally got it and windows 7 installed on separate hard drives. Windows installed first, then ubuntu 10.04.01. Had to use the alternate ubuntu install cd to make it work. During the install it said there were no other operating systems installed on the computer and asked if grub could overwrite the master boor record. I knew this was something I wanted to do and if it was wrong it could most likely be fixed later. So that being said, ubuntu has taken over the boot of my pc. No grub menu pops up. Not sure how to add windows to grub to make it give me a choice. I did try pressing shift during startup to get grub to load, and nothing happened.
Here is my fdisk.
Windows is on sda and ubuntu is on sdb.
Disk /dev/sda: 74.4 GB, 74355769344 bytes
255 heads, 63 sectors/track, 9039 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000ddedc
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 13 9040 72508416 7 HPFS/NTFS
Disk /dev/sdc: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x02f94d51
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 19458 156295361 7 HPFS/NTFS
Disk /dev/sdb: 74.4 GB, 74355769344 bytes
255 heads, 63 sectors/track, 9039 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005cb95
Device Boot Start End Blocks Id System
/dev/sdb1 1 8666 69606400 83 Linux
/dev/sdb2 8666 9040 3004417 5 Extended
/dev/sdb5 8666 9040 3004416 82 Linux swap / Solaris
Disk /dev/sdd: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0195c00b
Device Boot Start End Blocks Id System
/dev/sdd1 2 30401 244188000 f W95 Ext'd (LBA)
/dev/sdd5 2 30401 244187968+ 7 HPFS/NTFS
