Ubuntu Networking :: Can't Connect To Router Via Wired Connection?
Jun 24, 2011
I have installed Ubuntu for the first time (version 11.04), finally making the step to open source software. Everything seems to be working fine, however I can't connect to my router via a wired connection.I can use the wireless network,hich was detected and I could connect by giving the code. But when I try to connect to this network by wired network, it tries to connect and it says "connection offline" after a while. It never establishes a connection. I used the standard automatic DHCP settings of eth0. I never got this problem with another OS and it's not the cable that's not working
I have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
I wanted to try Ubuntu again but have gone wayback to an old 8.10 disk because I couldn't get 10.10 to work. The install with 8.10 went fine but the internet will not connect. The network manager shows eth0 grayed out and when going in to manage the connection it says 'never'. I'm using Vista with a broadband modem connected to a netgear router.
i recently connected this router to mahh modem..http:[url]....before router connection i was able to connect to internet via "pppoeconf command" but now i am not able to connect to internet from ubuntu ..i am still using lan cable coming out or router to connect it with pc..
The situation is I have one machine just installed 10.04yesterday, and I plan to take it as FTP server sharing filesvia LAN and WAN as wellBut after setting up all network withNetwork-Manager found that my dsl connection willdisconnect while my wired connection was connected.
my network-manager setting process is: 1.wired tab: IPv4:192.168.1.x
i can't connect to the wired connection, but i can connect to the wireless... i'm using Ubuntus 10.04. when i run this codes into the terminal it shows:
connect to my wired connection using the terminal?i screwed myself over and dont have a desktop menu bar,and i need to connectto the internet so i can get it back.
Using 10.10 and have a wired connection that according to the system is connected, but when I open a browser I can't connect to any sites. What am I missing here? I can't for the life of me figure this out.
I have just installed a fresh copy of 9.10 on an older Compaq nc6000 laptop. I need some help getting my Linksys WUSB600N wireless adapter to function properly.
I have "half-way" connectivity, meaning that I can see (and connect to) my home wireless network but I can't connect to the internet (unless I use the wired connection). I have installed NDIS wrapper - no change
I recently installed Ubuntu 9.10 on my Dell Inspiron 1545 64-bit laptop. Before that I used Windows7. In Windows, the internet connection worked perfectly well. But after installing Ubuntu, I am unable to connect to the internet. The network-manager applet finally says that "You are disconnected". When I do the "ifconfig", I got no IP address.
So, I installed Ubuntu 9.04 in the same system. But the problem persists.
I gone through many posts in this forum but nothing was useful.
Since that time I moved to Archlinux and I love it. I do however run lubuntu live from a USB for my work PC. I am having a problem with it. I think it's okay to post here because the core of the system is still Ubuntu. I don't think LXDE is the problem. I start up the live environment and it says 'wired connection connected' but I can not load any pages or do anything.
I thought it may be a problem with configuration so I copied down (from Windows) the IP, Subnet, Gateway and DNS. I put them in manually and it doesn't say connected any more and still no connection at all. I am unsure what to do from here. I am not really familiar with Ubuntu enough to try much. I tried to 'dhcpcd eth0' but dhcpcd isn't installed. I guess the default Ubuntu network manager has dhcp enabled automatically.
newly installed fedora 15 is not able to connect to internet i have broadband connection with wireless modem my laptop is connecting to wireless modem network. but i am not able to configure pppoe connection on it PS: i am able to connect to internet when using wired connection from modem
My laptop has been working fine with ubuntu 10.04, and earlier today it shut down after running out of battery. I came to use itr and discovered that the wifi icon had disappeared from the panel bar, and it won't connect to the wireless networkor via a wired connection.I have had a play around with this, tried ping -c5 google.comresult was:ping: unknown host google.comand ping -c5 4.2.2.1result: onnect:etwork is unreachable.I have other computers connecting to this network and know that it is working fine.
I've been at this the last 3 hours now or so. I am not a very good with Linux, I am fine with all other areas. I have this laptop, with a Intel Pro 2200BG card. The idea was to install a lxde lightwieght on it and use PCLINUXOS, because its "easy". This computer is for internet browsing and thats it. Under the Network Center -- I can see all networks, including neighbours. When I try to connect to my router via Wireless, I get connection failed over and over.
I then tried doing all the following: Changing the router from WEP to, WPA, WPA2 personal, WPA2 Enterprise Changing the SSID, broadcasting to ON, changing the SSID name I've used various different passwords, and reset the router now about 50 times. I am connecting to my Router (as Ive changed the SSID and noticed it picks up the new name). (Yes I can see the correct MAC addreess). Yes I am on the right channel, all good here.
My Nintendo DS is connecting fine with all the changed settings now. The wireless card worked fine under Windows XP (However I just removed the operating system since I really had no need for it). I've tried every other mode, it works wired. Like I had explained above, I downloaded a what I thought was an easy verison (distro), I was really hoping to get away from the crazy windows life with crazy errors and instability.
I did try enabling display log, and doing it manually by adding a connection, etc. The log tells me about as less would a windows event log: it says Problems occurred during the network connectivity test This can be caused by invalid network config or problems w/ your momde / router Reluanch, etc.
I can connect to the internet fine with wvdial and wvdialconf; heck I am even posting from my PCLinuxOS FM Distro. I want to setup an ethernet connection between two PC's, one running PCLOS 2010.11 FullMonty and the other Knoppix 6.2.0. Knoppix is fine and setting up a connection is simple but with PCLOS I have been having many problems trying to set it up. I tried using the drakconnect tool but it did not work. I tried assigning it a static IP Address but the other PC would still not pick it up and to to it all I keep getting the same error message about problems during the network connectivity test!
I have just installed Linux Mint 8 to an Asus A6000. My problem is that the computer won't connect with my wireless router. I have tried with MAC-adress and such, but still no respons. I also tried to connect with a cable to my modem, but no response there either.
I think I may lack some drivers, to what I think is Broadcom b43, but I am not sure. I tried to download the drivers on my other computer, and transfered them to the Asus. I managed to install 2/4 drivers, but on the two others, I get this message "Failed to fetch ... Couldn't reach archive.ubuntu.com"
I have searched and found no answer to this one. I have a Linksys DSL router BEFSR41 (wired) which works great. I recently got a Linksys Wireless-G Broadband router. Which also works great with my Dell mini 10 netbook running 10.04. I have two computers (wired) also running 10.04, what I want to do is use both routers with only one internet DSL connection. I have the wired (Master Router) connected to the wireless (Slave Router) and I fire up the Dell it sees it and connects but I can't connect to the internet. I can connect through my network and share files through all 3 machines. Do I need to reset the wireless, to enjoy the internet? If so the wireless came without instructions or CD.
The problem isn't with thew new computer but with my computer running Ubuntu. The problem is that I'm having trouble getting the Internet to work. Before the router I just plug my PC straight into the modem but now with the router I can't get on the Internet. I can get a connection to the router but no Internet. I know the it is not the router because I use my PS3 and it worked fine. I spend like an hour just trying to get the connection but can't figure out the Internet problem. What I did to get the connection is copy the ip address, Mac, and etc. from the PS3. Then I made a new connection and put the data in the IPV4 settings and it got a connection but I'm not sure if I did that right or just got lucky
My computer takes a while to connect to my Linksys N router.
It used to connect in a snap of your finger automatically.
Now it does not.
Yes I have tried manual configuration, and double checking the password, ssid, protocols, and security type.
WPA2 personal is the security type.
There are maybe 4 different ways I know how to connect. The most annoying thing is when this box pops up saying to type in a password for the network connection.. and keeps popping up even when everything is right.
All I need is a reliable, easy, and automatic program to connect me to the internet, maybe even before I log into my system.
Linux Ubuntu 8.04 LTS Desktop Edition is my system. Brilliant system.
I have been trying to connect to the internet with a wired LAN connection for a while now with no luck. Running version 8.04 LTS on a 32-bit desktop. Interestingly, my 64-bit desktop running version 8.04 64-bit automatically connected to the internet with no problems or input from me. Both are connected to the same router.
I figured i'd try and copy the network manager settings from the 64-bit machine to the 32-bit machine, which involved setting an automatic configuration (DHCP}. All went well except no DNS server address showed up on the 32-bit system, despite there being one on the 64-bit system. Trying to run Firefox like this results in the 'page load error' page coming up immediately.
I then manually added the DNS server address from the 64-bit system to the 32-bit system, and all that did was prolong the time it takes for the 'page load error' page to appear.
I just installed ubuntu 8.10 on my pc. Before was XP installed. I formatted the system and installed ubuntu. Installation was successful. Problem is that I cant connect to network. My network card: realtek 8139 ethernet card
On ifconfig I get: Code: eth0 Link encap:Ethernet HWaddr 00:16:76:af:23:b3 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:23 Base address:0xb800
Also the connection is wired one with modem only it's reliance broadband. The wire is connected between modem and pc but there is no blinking of light for this connection. The wan is active and wan's light is blinking and when I was on xp on same pc there was no such problem.
I am unable to connect to the Internet using a wired connection. I was able to use the wired network yesterday. But I had problems with the flash player, so had to reinstall Ubuntu again. I am able to connect to Internet using wireless connection. But I need to connect to the wired connection. I am using Ubuntu 10. In my IPv4 settings, it is automatically set to DHCP, using which, I was earlier able to connect. But now it doesn't seem to be happening.
But there are other entries on the syslog that were recent.
I have just setup Ubuntu on my Dell Laptop a Lattitude C640 with a 3Com 3c905C Tornado Wifi Card. Well the wired and wireless do not work. They try to connect then bang no connection. I would be able to make some headway I think but I have no basic skills with Ubuntu. I have mastered how to get info from the terminal but how the heck to you edit a file? How do you get to that stage?
I've just installed 11.04 Natty on an old Laptop (Dell Lattitude C400) and am unable to connect to my home network (wired LAN connection, no wireless). The laptop previously had WinXP installed and was able to connect (I have also double checked the cables and ports and they're all functioning ok).
I bought a switch, connected it to our router,and moved the patch cords to the switch. All but one of the workstations connect & work fine. If I plug the non-connecting wire into my laptop it connects. If I plug the non-connecting wire back into the router,the workstation connects.So...it seems that this particular workstation will only see the address of the old router. It's stuck in there & won't refresh. Two of the PC's & the laptop are running 10.04 (Mint 9 Actually), and one has Windows XP on it.e problem is with one of the 3 10.04 boxesI have tried removing the power cord & MB battery and leaving them out over night.Also cleared the bios. Same results. Connects fine to the old router but will not connect to the new switch.
I'm trying to set up a wired/wireless linux router. it wirelessly connects to a network, then is wired to the internet port on my netgear wgr614.
eth0 (wireless) is dhcp
eth1 (wired)
The router
Internet port is static
And local network
I turned forwarding on, set the iptables for masquerade and nat, but i'm not really sure what i'm doing wrong. any pc connected to the wrg614 can see the pc thats supposed to be forwarding packets but can't see any further(the other router at 192.168.1.1 or the internet).
I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
To be brief, I am having intermittent connectivity issues with a wired connection to a WRT54G2 router. I have no such issues if I am plugged straight into the modem. My wireless persists throughout the outages and they usually require me to restart the interface on my machine. I have used Wicd Network Manager and Ubuntu's out-of-the-box Network Manager.
hostname -rs Code: Linux 2.6.32-25-generic ifconfig eth0 .....
