Im trying to connect to the internet through a wired link to a bthomehub. every time i try and connect i get this:
The homehub says its conneted yet ubuntu says its not. im using version 11.04
I am a Ubuntu novice who recently shifted completely to Ubuntu 10.04 from Windows 7 on my Dell Inspiron Mini.
1. I am able to connect to the internet ('Wired') at home but when i plug in the internet cable at work it is not connecting. It gives me the message 'Unplugged, you are now disconnected'.
2. I tried installing the Wicd network manager. Even though there are wireless networks in range it doesnt show me the wireless networks (like it used to show in wiindows).
I have read through a long list of commands in the forums of commands to be executed and executed them all but couldnt connect. Is there anything basic that I am overlooking?
I thought that wired network should work once I plug in a network cable irrespective of the place. How come I am unable to connect to the network at work? I used to have a windows 7 partition and the net connected plug and play when i was in the windows side. I dont want to install Windows just for the internet at work again.
I installed ubuntu 9.10 on my laptop a few days ago and love the OS so far. However, initially i could only get internet connection though an ethernet cord. After much internet searching, i finally figured out how to get wireless internet. Unfortunately, in setting up wireless internet, I no longer have wired internet. The system doesn't seem to recognize my wired internet anymore. I'd like a scenario where i can connect to the internet both wired and wireless.
View 9 Replies View RelatedI've been running ubuntu for about 6 months, so i'm still abit of a newbie at linux but heres what im having issues with:I'm having troubles connecting to the internet on ubuntu, i have no problems connecting on xubuntu on the same machine. I can connect to my network but i cant access the internet on firefox or snaptic or any of that, but the weird thing is i can successfully ping address' in the terminal. I can also connect to my router config page in firefox using 192.168.0.1.
My internet worked perfectly about a month ago on this ubuntu install, so i cant figure out what i did to make it stop working. I think it may have something to do with the/etc/resolv.conf file because it only exists as /etc/resolv.conf.tmp and when i run "sudo dhclient wlan0" (or eth0) it says:
ubuntu@ubuntu:~$ sudo dhclient wlan0
Internet Systems Consortium DHCP Client V3.1.2
Copyright 2004-2008 Internet Systems Consortium.
[code]....
currently running ubuntu 9.10, the internet connection im hooking up to is a router from a friends personal dish internet (were all deployed to Afghanistan). Here is all the static information that i need to input.now i have all this information input in windows 7 and it works fine since its all broken out exactly how it was given to me in the ipv4 settings page. wicd in ubuntu however wont use these settings.
View 2 Replies View Relatedi recently connected this router to mahh modem..http:[url]....before router connection i was able to connect to internet via "pppoeconf command" but now i am not able to connect to internet from ubuntu ..i am still using lan cable coming out or router to connect it with pc..
View 2 Replies View RelatedI'm running Ubuntu 11.4 on my laptop, and I can't connect to the internet with it (neither wired nor wireless). It used to be all fine under 10.10.
View 1 Replies View RelatedI have just installed a fresh copy of 9.10 on an older Compaq nc6000 laptop. I need some help getting my Linksys WUSB600N wireless adapter to function properly.
I have "half-way" connectivity, meaning that I can see (and connect to) my home wireless network but I can't connect to the internet (unless I use the wired connection). I have installed NDIS wrapper - no change
I just installed ubuntu 9.10 netbook remix (karmic koala) on my eeepc so im pretty new to linux but getting the hang of it. i was running windows before and the wireless and wired connections were perfectly fine. when i installed ubuntu, i chose it as my main system and wiped windows. now i cannot connect to the internet through the ethernet cable or wirelessly. even though i put in the right ip adress etc it doesnt work. the wireless doesnt even pick anything up so i uninstalled network manager. i installed wicd network manager and that doesnt pick anything either. BTW using a Ralink RT2860 network card.
View 4 Replies View RelatedI recently installed Ubuntu 9.10 on my Dell Inspiron 1545 64-bit laptop. Before that I used Windows7. In Windows, the internet connection worked perfectly well. But after installing Ubuntu, I am unable to connect to the internet. The network-manager applet finally says that "You are disconnected". When I do the "ifconfig", I got no IP address.
So, I installed Ubuntu 9.04 in the same system. But the problem persists.
I gone through many posts in this forum but nothing was useful.
newly installed fedora 15 is not able to connect to internet i have broadband connection with wireless modem my laptop is connecting to wireless modem network. but i am not able to configure pppoe connection on it PS: i am able to connect to internet when using wired connection from modem
View 2 Replies View Relatedi have installed fedora 15(lovelock) on my lenovo z560 ideapad laptop. in fedora 15 lovelock internet is not working by wire or wireless. Network controller: Broadcom Corporation BCM4322 803.11a/b/g/n Wireless LAN Controller (rev 01)
[amit@localhost ~]$ ifconfig
em2 Link encap:Ethernet HWaddr 88:AE:1D:274:45
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code].....
how to make dsl setup and to acess both wireless and wired at a time.
View 2 Replies View RelatedI am a beginner to ubuntu. I have installed ubuntu 10.04 on my laptop using wubi.When I am trying to edit the IP address using network editor,apply button is not highlighted.I managed to give IP as well as netmask through command prompt.But I am not able to give gateway and dns IP.Please help me configuring this.
View 1 Replies View RelatedI have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
View 9 Replies View RelatedMy laptop has been working fine with ubuntu 10.04, and earlier today it shut down after running out of battery. I came to use itr and discovered that the wifi icon had disappeared from the panel bar, and it won't connect to the wireless networkor via a wired connection.I have had a play around with this, tried ping -c5 google.comresult was:ping: unknown host google.comand ping -c5 4.2.2.1result: onnect:etwork is unreachable.I have other computers connecting to this network and know that it is working fine.
View 8 Replies View RelatedI have been trying to connect to the internet with a wired LAN connection for a while now with no luck. Running version 8.04 LTS on a 32-bit desktop. Interestingly, my 64-bit desktop running version 8.04 64-bit automatically connected to the internet with no problems or input from me. Both are connected to the same router.
I figured i'd try and copy the network manager settings from the 64-bit machine to the 32-bit machine, which involved setting an automatic configuration (DHCP}. All went well except no DNS server address showed up on the 32-bit system, despite there being one on the 64-bit system. Trying to run Firefox like this results in the 'page load error' page coming up immediately.
I then manually added the DNS server address from the 64-bit system to the 32-bit system, and all that did was prolong the time it takes for the 'page load error' page to appear.
I have wired internet, but I can't connect to my modem. I have cable internet (Comcast) but my computer can't detect it. I do not know what do to. Tried a whole bunch a things, but I'm a novice, (Ubuntu 10.something I tried to call but they say everything was okay and I keep telling the Comcast lady I had Ubuntu, but apparently she insisted I had Windows. I thought they were not very smart, so I gave up on them.
View 4 Replies View RelatedI am the new user to LQ. I am not able to download anything from internet. And I am using ubuntu10.04. It is saying
W: Failed to fetch [URL] ...untu9_i386.deb
Could not connect to 172.20.0.100:8080 (172.20.0.100). - connect (113: No route to host)
This happened when I am trying to install c++ and I think there is some problem in connecting to the internet. I set proxy server address and port number in System->preferences->Network proxy settings. I think I have set the proxy settings properly. And it is working fine in win XP.
How to connect wired broadband internet with ip in Linux 'ubuntu'
View 2 Replies View RelatedI have installed slackware 13 but I am not able to connect to wired internet connection from BSNL in slackware while this connection is working fine in Fedora,Opensuse,Mandriva,Debian and Windows-XP.
View 1 Replies View RelatedIs it possible to join two wired computers to one router to access the internet? I am using a talktalk router with only one port.
View 4 Replies View RelatedI am unable to connect to the Internet using a wired connection. I was able to use the wired network yesterday. But I had problems with the flash player, so had to reinstall Ubuntu again. I am able to connect to Internet using wireless connection. But I need to connect to the wired connection. I am using Ubuntu 10. In my IPv4 settings, it is automatically set to DHCP, using which, I was earlier able to connect. But now it doesn't seem to be happening.
But there are other entries on the syslog that were recent.
Output of dhclient
I have recently installed Ubuntu lucid lynx and at my old house I had a regular cable modem (no wifi) and never used wireless internet. I would simply unplug the ethernet from the windows desktop plug it to my laptop and I was good 2 go.have recently moved and my roommate has a cable modem w/ wifi capabilities. When I plug in I am told that I am connected but......Nothing. dont know if the problem is due to the modem having wireless capabilities when my old one did not or the fact that my roommate has a win7 laptop that is connected via wifi etc. There have been a FEW times that I have walked out plugged in and everything has ran well. when I do plug in I look under connection information and I am told that I am connected at 100Mbps but whenever I try to visit a page I am out of luck. I define newbie (as far as Linux distros) and I have tried everything including going to work w/no sleep because I'm going through massive trial & errors
View 10 Replies View Relatedeverything works good in windows environment. still in ubuntu 9.1 which i am using , cannot access internet using connection manager
View 4 Replies View RelatedI am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View Relatedin linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies View RelatedI have installed karmic on my inspiron E1505. Everything is working fine except the wireless connectivity.
I have been following the below thread for getting wireless to work. I am stuck at step -3 (compiling - DISWRAPPER) .
[url]
Getting the below compilation error:
I was having a problem with cairo dock, asked on the board how to resolve was told to reinstall the visual driver for my monitor since I have an ati vid card since with the updated kernal u have to reinstall those drivers(didn't know that, I'm new to opensuse). I thought I did that before so I completely uninstalled it so I could then do a fresh reinstall but I wasn't paying attention and my laptop was unplugged for a while. I stepped away while the install was going on and my laptop died.
I tried plugging it in but had to restart my laptop when I did I got the command line rows and when I tried to start GDM it wouldn't start, I did so as SU. Attempted to connect to the internet via networkmanager and couldn't get wifi or wired to work. Anyway I can access my desktop visually just so I can start yast and install the driver or will I have to reinstall 11.2 or use the cd to repair? If so how do I use the cd to repair?
I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)