Did not find frimware other than from vendor. I checked openwtr, dd-wrt, tomato frimware. Have 2 broband routers. Standard wi-fi B. They can work as switch, router or gateway.
[Code]...
Are there any open source or third party applictions can could do a bare metal recovery on Debian or any linux machines? We are looking for a solution that won't need a shutdown or reboot.
View 2 Replies View RelatedI have a linksys router in my basement and physical access is pretty much blocked by a stuck trap-door. I could try to shut off the main power switch, but I like to see that as a last resort. The problem I have is that I have an open (no encryption) wifi connection between my pc and linksys router, yet I cannot connect to it. Until a couple of days ago I could connect to it with my android handheld device, my linux laptop, and my windows desktop. All these devices are now unable to connect. I attached the wicd log from my linux laptop. How to gain access to my router again?
View 9 Replies View RelatedJust wonder if we can really install third party software under ubuntu 9.10..i tried to installed some third party software through software source but in vain.
View 6 Replies View Relatedwhat is the technical/non technical difference between quagga and zebra routing platform ? and if any one knows other open source routing platform other than quagga, zebra, xrop, vyatta.
View 1 Replies View RelatedIs there any open source virtual machine so i can study the source in order to create my own? i'm gonna write my own, so it doesNT matter if license does not allow further development of the code.
View 1 Replies View RelatedCan we list out some of the open source protocol testing tools for Linux ?It will help us a lot.
View 1 Replies View RelatedI want to see the source code of smplayer software.from where i can see source code of open source softwares?
View 9 Replies View RelatedWe all know we can install a linux system such as Fedora 10 and use it. Being linux, one should in principle get the source codes for everything that has been precompiled (except the proprietary drivers such as nvidia) in the installation DVDs/CDs. Where are the source codes ? Is there a place I can download them ?
To avoid confusion, I am not referring to the kernel source that can be compiled to give a linux kernel, but that does not include the drivers, such as intel_drv.so.
To be more specific, the intel graphic i810 driver has been built into any linux system, but where is the exact source? One answer may be that primary source intellinuxgraphics.com. However, if anyone tries to download the every changing (i.e., keep updated almost every single day) driver source codes from freedesktop.org, it is almost certain that the source codes will not be the same as the one that is finalized in Fedora 10.
Any easy to install/configure network/server monitoring tool? PLease note I'm looking for something of little lightweight here (Not something like zenoss) But I'd still like to get performance graphs and event notifying alerts. Also note this is to monitor less than 50 servers and perhaps a firewall or 2.
View 2 Replies View RelatedI'm trying to setup OpenVPN to use a third party CA, and its unclear to me how to use the serial and index.txt files that are created when one uses the easy-rsa scripts to setup OpenVPN. If i'm using my own CA can I ignore those? Its also unclear to me how OpenVPN figures out the server.key passphrase. I'd also like to leverage the --tls-verify cmd directive but I am unsure of where to specify it.
What I would like to do is have --tls-verify call a perl script that then verifies that the CN of the certificate the client is passing in matches a cn in an LDAP group. I figure I can do the LDAP group lookup with some easy perl stuff, its unclear to me though if --tls-verify is going to pass in the RDN of the client cert.
I'm trying to connect to a friend's Linksys WAG160N router using Ubuntu 10.10, but it's just refusing to connect. I can connect to other wireless networks fine - it seems to just be this router. The wireless indicator applet thing shows that I'm trying to connect, but the password box always just pops up again and again. I'm certain I've got the password correct and am able to connect under OSX on the same computer. Connecting to it via ethernet also works fine.
View 1 Replies View RelatedUbuntu 10.04 not seeing my WUSB300N. What is the Easiest way to get this working?
View 1 Replies View RelatedI can not seem to find a pdf viewer browser plugin other than the actual craprobat plugin from Adobe. The default Ubuntu install comes with a perfectly good open source stand alone pdf viewer, but this means that the browser has to save it to your download directory then run the external viewer, and eventually your download directory is all cluttered up. I would much rather just view the pdf in the browser.Is there no open source browser plugin?
View 1 Replies View Relatedi want to know how to contribute to open source...i don't know from where to start??where to look for??
View 9 Replies View RelatedI have loaded ubuntu 9.10, and am not getting internet from my router using a linksys EG1032. I have found articles stating that i should use the sk (URL...) or nge URL...)drivers. According to the instructions i found, they require that i make changes to my kernel config. I do not know how to do that, or if doing so is wise.If someone would help me figure out how to connect this NIC card.
View 7 Replies View RelatedMy first Ubuntu/Mythbuntu install. Installed OS, plugged in linksys wireless G adapter. It finds the network but cannot connect. Discovered wireless priviledges while setting up admin/user accounts. Should be ready to go. or not, I'm thinking it needs a driver but
1) in linux? certainly not in Fedora.
2) If it can see the network it doesn't need a driver,
My settings are wrong or I'm missing something. SSID is set in settings. Do I need mac address and BSSID?
I just installed Ubuntu 10.04 on my formerly XP system, and I'm trying to get my wireless network working. I have a Linksys WUSB11 v2.6 wireless adapter connected by USB to the system.
The system networking icon reports "No wired networks".
I'm not sure whether or not the system sees the USB ports... If so, it apparently doesn't recognize the adapter.
I saw a few posts that indicated that this adapter didn't work on 10.04 but it had worked on 9.04.
I'm looking for any info to get this working, including any or all of the following:
* How to determine if the system sees the USB ports (or is it "obvious" that it does)
* Should the wireless adapter work just by plugging it in?
* How to troubleshoot the networking adapter to get it working
* (If downgrading to 9.04 is likely to solve the problem) how to downgrade to 9.04 from 10.04...
The Linksys USB Wifi Adapter (WUSB11 v2. does not work with UBUNTU.
I am using UBUNTU DESKTOP 64-bit (x86_64) 10.04, but I think it is not working in the 32-bit version as well.
I really love to get my Ubuntu work with my 64-bit hardware....
Previously I had my desktop hooked up to a nearby router via an ethernet cord with my parents' computer having a wireless usb adapter to connect (This thing: [uRL]). We just moved and our setup has reversed (router is near their computer, I am using the usb adapter). I just installed the latest Ubuntu and now I can't get the usb adapter to work. I'm very new to Linux and I have no idea what to do. I think this is the same usb adapter.
View 1 Replies View RelatedI just bought Linksys WAG160N ADSL 2+ Router and modem device. It came with an setup installation CD which is not running on ubuntu. In the manual it is written that it will run only under windows and Mac OS. I have only Ubuntu on my laptop.
I need to run the setup CD to go ahead. I searched more than three hours to find out how to run this CD so that I can complete the setup of my new modem-router but did not find any solution.
My old ubuntu laptop beeps 3 time on startup and then freezes. This forced me to install 10.04 on a new laptop. Now I can't get the linksys wpc54gs ver 2 to get connect. I can see the router with a padlock by it. I pretty sure I have the correct password in the right spot. I can access the internet with the wire connection. I'm sure it something simple I forgot from before when the card was working in the old laptop.
View 2 Replies View RelatedI think lightning may have killed it. It was working fine. Now I cant get it recognized no matter what I do. It also quit working in Win XP where I never had a problem with it because it had its own connection software.
dmesg yields this-
RTUSB disconnect successfully
[ 312.876034] usb 2-1: new full speed USB device using uhci_hcd and address 7
[ 312.996021] usb 2-1: device descriptor read/64, error -71
[ 313.220031] usb 2-1: device descriptor read/64, error -71
[ 313.436038] usb 2-1: new full speed USB device using uhci_hcd and address 8
[ 313.556025] usb 2-1: device descriptor read/64, error -71
[ 313.780031] usb 2-1: device descriptor read/64, error -71
[ 313.996032] usb 2-1: new full speed USB device using uhci_hcd and address 9
[ 314.404022] usb 2-1: device not accepting address 9, error -71
[ 314.516021] usb 2-1: new full speed USB device using uhci_hcd and address 10
[ 314.924029] usb 2-1: device not accepting address 10, error -71
[ 314.924046] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 343.664017] pan0: no IPv6 routers present
[ 809.024049] usb 1-1: new high speed USB device using ehci_hcd and address 10
[ 809.182271] usb 1-1: configuration #1 chosen from 1 choice
[ 809.182837]
[ 809.182839]
[ 809.182840] === pAd = ffffc20020b41000, size = 598568 ===
[ 809.182841]
[ 809.182845] <-- RTMPAllocAdapterBlock, Status=0
guest3@guest3-desktop:~$
I have a linksys wireless-b wmp11 network card. Can anyone tell me how to get this up and running? Maverick is up to date as of yesterday and I have the cd that came with the card. I have no way to access the internet on the machine. I am typing this from my laptop.
View 2 Replies View RelatedHere is the situation: I am currently running Ubuntu 10.10 64 bit. I'm trying to get my Linksys AE1000 to run correctly. I have followed many tutorials but most notably was:[URL].. lsmod shows that rt3572sta is loaded. network manager in gnome is able to find my router. my problem occurs when it tries to connect to the router using wpa2 security. It continually asks for the wireless password then will freeze the system after a number of attempts. After digging in for a bit, I was able to dig out a dmesg trapping the error:
BUG: unable to handle kernel paging request at ffffcfb0138af1ec
IP: [<ffffffffa021c7e8>] Cntl0idRTBssidProc+0x78/0x570 [rt3572sta]
PGD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu7/cache/index2/shared_cpu_map
CPU 2
I really don't see the need to continue on with those error messages lsmod still shows rt3572sta after the failure. In case anyone wants to see the changes I have made to the files before the make, I have included them. but changed the extension to "txt" to accommodate the up-loader and my rt_linux is too big to fit here, just not that it was 2 lines that were changed to work with the kernel. If anyone wants to know what I mean by the system freezes, I do mean just that. The mouse will continue to work, but I am then unable to open any programs, unable to reboot the computer. it requires a hard reset.
I have uninstalled the drivers, installed them, make them, make install them, make clean, start from scratch a few times, and am getting no give here.
I am dual booting XP and Ubuntu 10.10 64bit on a Dell Latitude E6410 and I have a Linksys WRT120N router connected to my Modem.
So the weird thing is, under XP I can use the internet while connected to my router. Under Ubuntu I can't use the internet while connected to my router. But I can use the internet in Ubuntu if I connect to my neighbor's router called "linksys". So something happens when I connect to my router that makes Ubuntu not able to access the internet. But if I'm connected to my Neighbors router or if I use XP while connected to my router I can use the internet.
I have been using Ubuntu for about a year, so I'm getting better but still a noob. I've tried to figure out what's going on by looking at other forums and posts and trying to see if anyone has solved this. So far I've had no luck. This is also the first of many problem I have encountered that I have been unable to solve using online posts, and is the first problem that I have had to resorted to creating a post to try and fix.
I connect to multiple wireless system each day but when I encounter a Linksys-n router the computer will recognize it and connect but does not go online.
Does this give any clue for why it will not connect?
Code:
802.11a/b/g
System wireless is: Toshiba Satellite M115-S3094 with Intel PRO/Wireless 3945ABG (802.11a/b/g), Ubuntu 10.04
I have a linksys wusb100 and need to set it up on ubuntu 8.04 and 9.10.
View 4 Replies View RelatedI am net to this whole Linux thing. I cant seem to connect to my Linksys router. Not sure if I have to call Linksys or what.Mine is a WRT54GS
View 1 Replies View RelatedDoes anyone knows of any open source proxy/web traffic monitoring application so I can run reports on users web browsing for Linux? Something equivalent to websense? but free I'm not really concern about blocking any traffic only running reports.
View 2 Replies View Related