Ubuntu Networking :: TP-Link Router Not Giving 150 Mbps?
Mar 31, 2010
Details:
1. Using XP Pro SP3 (32-bit)
2. Laptop = Sony VAIO VGN-FZ140E
3. Recently purchased a TP-Link Router (TL-WR740N) which claims to give 150 Mbps speed
When connected, my Intel Wireless WiFi Link 4965AGN shows a speed of only 65 Mbps . A friend came over with his laptop (having Windows 7) and was able to get 150 Mbps speed. I even compared and the same web sites were opening with considerable difference on our laptops. Do I need to upgrade the driver?
View 2 Replies
ADVERTISEMENT
Feb 23, 2010
We use a linux box for routing and traffic shaping (we have a few thousand ip addresses routed through this box) and the soft interrupt load is very high.We use linux kernel 2.6.32.7 on an Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz.Cpu1 serves an internal network interface, and Cpu3 serves a single physical network interface (with 2 vlans):
Cpu0 : 0.4%us, 0.0%sy, 0.0%ni, 98.2%id, 0.0%wa, 0.0%hi, 1.4%si, 0.0%st
Cpu1 : 0.7%us, 0.0%sy, 0.0%ni, 16.1%id, 0.0%wa, 0.3%hi, 82.9%si, 0.0%st
Cpu2 : 0.0%us, 0.0%sy, 0.0%ni, 96.1%id, 0.0%wa, 0.0%hi, 3.9%si, 0.0%st
[code]...
View 1 Replies
View Related
May 5, 2011
If I have a desktop with a USB wifi adapter connected to the internet through an ethernet cable, is it possible to create a wireless network using the adapter that will allow other users to connect to the internet through mine? I'm in a fairly low-tech place for the next few weeks and getting a router isn't likely.
If it's possible, anyone have links or instructions for how to do it?
View 7 Replies
View Related
Jan 24, 2010
the router is TP-Link TL-WR340G. When I got it I entered the menu and configured everything without problems. Some time ago I had to reinstall ubuntu and after that I couldn't access the router. I tried to reset it, i tried switching the wifi on and off. I connect the router and the pc with the network cable, i type 192.168.1.1 in firefox and it says: can't access site. I plug the internet cable in the modem - its the same and I dont have internet at all.
View 7 Replies
View Related
Apr 3, 2011
I need to connect to my router using only CLI, specifying an username and password, preferably with a single command line, so it won't be interactive, 'cause I need to include the command in a script.
View 5 Replies
View Related
Dec 22, 2009
I have a very simple setup
router DIR 100 4 ports
adsl connected to WAN
Linux connected to port 1
Mac connected to a port 2
I am trying to figure why linux hostname is not detected in my LAN. The strange thing is that my macs hostname is automatically detected and put in DHCP CLIENT LIST! I have scrolled the whole manual 10 times.
My Linux (Slackware 13) gets IP address automatically by DHCP server in router. Has anyone had this problem with routers in general?
Output from router DIR 100:
View 2 Replies
View Related
May 12, 2010
I have laptops with intel 4965/AGN wireless hardware and ubuntu jaunty. My wireless access point, router, gateway is a D-Link DIR-655. The D-Link is directly connected to my cable modem. The connection does not drop, but They suddenly quit talking with each other. After a brief time lapse, they start talking again without intervention on my part. When I say "stop talking" this is behavior where a browser will return "page or server not found" errors or "DNS timeout". Has anyone seen this sort of network behavior and have some idea about corrective actions?
My attempts to get some help from D-Link have not been successful. Since there are not hundreds of folks reporting troubles, they don't [want to?] understand one poor souls problems.I've tried to ask about this several times and several places.
View 4 Replies
View Related
Jan 13, 2010
I use a wired Dlink Adsl Router GLB502T with its inbuilt dialer configured. Problem is it will not connect while computer is running.When I try to ping the local ip of the modem this is what I get "ping: sendmsg: Operation not permitted" and "/etc/init.d/networking restart" has no effect either.I need to restart my computer every time i want to connect to the Internet.I switch on the modem when the grub bootloader appears and the modem connects without any problem.This problem appeared when i installed Ubuntu 9.04.There was no problem with Ubuntu 8.04.
OS:Ubuntu 9.04
Motherboard: Asus M2N68-AM
NVIDIA Geforce 7025/nForce 630a
RTL8211CL Phy Gigabit LAN
[code]....
View 4 Replies
View Related
Jun 10, 2010
I got two issues with my wifi usb adapter:
1) it cannot see any networks around
2) i cannot setup it in master mode to use my PC as a router
As far as i can see, the device is recognized and the correct driver (rt73usb) is loaded. I was able to connect to a laptop somehow (the laptop could see other networks and the adapter's PC-to-PC network). I'd like to make it work as a router, i.e. share my internet connection (eth0) via wlan0. Here is what i have:
Code:
Ubuntu 10.04
Linux 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64 GNU/Linux
TP-Link TL-WN321G wifi usb adapter as seen as
Bus 001 Device 006: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
$ iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:off/any
[Code]....
View 4 Replies
View Related
Oct 27, 2010
I have a telephone connection of 1 mega internet modem huawei mt 880 SmartAX my desktop computer is connected via an ADSL PPPoE.I use Ubuntu 10.04 in Spanish and want to know how to connect a WiFi router TP-LINK TL- wr942nd to provide wireless Internet to other 2 PC, a desktop with a plaquet wireles G CNet CWP-854 and 500 series notebook olivetti olibook. The issue is that when I connect the router I can not even go online and do not know how to operate the network, I can not even connect the desktop to my internet provider
View 1 Replies
View Related
May 20, 2011
In addition to 2 "desktop" machines, I recently set up an Ubuntu Server with Apache2, but when I try to access my www.homepage from a machine locally connected to the same router (via both wired & wireless interfaces), I am directed to the Login page of the router, not to the www.homepage. Yet, when I access the www.homepage from elsewhere, my www.homepage is accessible.
I can browse to my www.homepage by entering the local IP address into browsers on both local machines, so I know the machines are talking to each other. Just not letting me get in via normal internet browsing channels.
Server: Ubuntu 11.04
Webserver: Apache2
Router: D-Link DIR-615
IP Address of: 192.168.0.110 (reserved on router, static on server)
[Code]....
View 7 Replies
View Related
Sep 23, 2010
I wrote a program to create a link list
Code:
#include <stdio.h>
#include <stdlib.h>
struct node {
[Code].....
View 4 Replies
View Related
Apr 18, 2011
I'm using Ubuntu Server 10.10 64 bit and am trying to get my Atheros AR81xx gigabit ethernet controller to use 1 gbps.I have 2 ethernet controllers, one's a linksys 100 mbps (which is connected to the router which goes to the internet) and the other is the Atheros gigabit controller that is connected to a Windows desktop that has an NVIDIA gigabit ethernet controller (for faster file transfers with a gigabit connection) I've ruled out that the problem is with the desktop as I plugged the windows PC into my macbook (which has a gigabit controller), and both the macbook and desktop report a gigabit connection.
I plug the windows desktop into the server and I only get 100 mbps. I am using a Cat 6 patch cable. I've tried several methods with ethtool to force it into 1 gbps mode, but none work. I've tried using a different cable. no change. I've tried making windows force a 1 gbps connection, didn't have the option to in the driver configuration. Only 10/100 configs. the commands I've tried in ethtool
Code:
ethtool -s eth0 speed 1000
Reports no error, but no effect. I've tried forcing off auto negotiation (I had a hunch it was causing the problem)
Code:
ethtool -s eth0 speed 1000 duplex full autoneg off
I get this
Code:
Cannot set new settings: Invalid argument
not setting speed
not setting duplex
not setting autoneg
I tried each setting individually, and autoneg won't set, the others will (but not do anything)
View 4 Replies
View Related
Aug 5, 2010
We are using Broadband 2 Mbps (India) connection in Redhat Linux 5.In Server there are two network card.ne is connected to Broadband another one is connected to LANthat meansEth0 Address : 192.168.0.5/255.255.255.0 gateway 192.168.0.1Eth1 Address : 10.0.0.5 /255.0.0.0How to configure NAT in Linux Machine#iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to 192.168.0.5#echo 1 > /proc/sys/net/ipv4/ip_forward
View 2 Replies
View Related
Aug 18, 2011
I get assigned an IP from the university's server. Every now and then, a student will plug in his router to the network trying to get wifi in his/her room.
And by doing so will start assigning IPs on the network, while rendering useless the university dhcp server, which has to cope with a higher number of pc's.
How can I specify to dhclient (or the linux system in general) NOT TO obtain IP addresses given by a specific mac address ?
View 7 Replies
View Related
May 31, 2010
I'm using D-Link GLB-802C router to connect to internet, It has one Ethernet port and USB port. I want to connect to internet in ubuntu using USB port. My PC is P4 machine and it isn't a Ethernet interface. My router's driver CD includes usb drivers to windows 98, xp OS only. I want step by step guide to setup the internet connection in ubuntu. I'm from sri lanka and i using SLT ADSL connection.
View 14 Replies
View Related
Apr 10, 2011
Using openSuSE 11.4 D-Link DWL-520+ won't connect to my router. The computer recognises the wireless card is there and working but I can't get it to connect to the router. Not sure how to get it to connect.
View 1 Replies
View Related
Apr 26, 2010
I have a problem where I'm using Ubuntu linux to mount a Windows Vista machine's USB drive and access it on the web using Apache. I did have the USB drive plugged into the Linux machine directly and that was working via the web. FollowSymLinks is on in httpd.conf
[Code]....
The mount works and I can see the files (see above) from my regular linux user account. If I make a test file in /mnt and soft link to that, I can see it on the web. So it's just the mount to the vista machine that seems to be a problem. It's supposed to be a simple read-only mount and the apache login should (I think) be able to see the same generic root access permissions.
log from apache: [Mon Apr 26 20:39:42 2010] [error] [client 99.99.99.99] Symbolic link not allowed or link target not accessible: /home/user1/pub_html/Music, referer: https://xx.xx.xx/~user1/music.html
The credentials have a login and password that matches a special read-only account on Vista. I can see the files on the system from Linux, but not via the web. As mentioned above, a different link to the same /mnt area works fine via the web. I've tried several different mount options with no success.
View 3 Replies
View Related
Dec 8, 2010
i have a problem with my new router and ubuntu 10.10. The problem is that my internet connection show me that my laptop had connect to internet but my browser can't open a website ( this problem is the same with my netbook ) to fix it always must turn it off and after on either it never makes.
View 4 Replies
View Related
Apr 13, 2010
Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies
View Related
Jun 18, 2011
I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
View 1 Replies
View Related
Nov 6, 2009
I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
View 12 Replies
View Related
Apr 24, 2010
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
View 2 Replies
View Related
Jan 3, 2011
Is there a way to limit bandwidth mbps on eth0?
CentOS.
Limit either total traffic, or by port/IP, etc.
View 2 Replies
View Related
Mar 26, 2009
These r IP provided by my ISP that i've put on Fedora 8:
WAN IP:xxx.xxx.xxx.17 (eth0)
Subnet:255.255.255.252
Gateway:xxx.xxx.xxx.18
Valid static(public) IP set of 2:
IP:xxx.xxx.xxx.147 & 148 (eth1, eth2)
Subnet:255.255.255.240
i want to run xxx.xxx.xxx.147 as a web server & xxx.xxx.xxx.148 as a ftp server. but I'm able to ping only xxx.xxx.xxx.17(WAN IP) from outside world. Can any1 tell me that how can i bring my 147 & 148 IP online without router.
View 6 Replies
View Related
Oct 2, 2010
I am wondering why I used to pull a much faster download and upload (approx 20 down 3 up). Now I only get 2 down and barely 1 up). I am not sure why this happened. Any ways to check on this? Just this one, dell d505 running suse 11.2. All other WiFi computers are pulling bandwidth as expected.
View 7 Replies
View Related
Feb 21, 2010
I've set-up a Linksys WPC54G v5 wireless card using ndiswrapper and the appropriate Marvell driver. It seems to work ok. On my other laptop running Kubuntu with built-in wireless the routing all works fine - I just get prompted by Network Manager for the WPA passphrase and I'm away. However, when I try to connect to my wireless router on thix Xubuntu-based laptop I get really odd security options.
When I try to connect I get a security prompt asking me for a bewildering array of information. There are four basic authentication options under "WPA & WPA2 Enterprise": TLS, LEAP, Tunnelled TLS and Protected EAP. None of those offers a simple passphrase, they all have some combination of username & password with certificates and keys. If I try to connect to other networks in my area, some do just ask for a WPA passphrase, not that I know them to check!
View 1 Replies
View Related
May 27, 2011
Right then... all DHCP
PEGASUS 192.168.0.101
When being pinged from another PC aok, but also pings back on 192.168.0.100? When being pinged from itself using ping 192.168.0.101 (or 100) all is well - when pinged as ping PEGASUS is says following:
64 bytes from localhost.localdomain (127.0.0.1): icmp_req=1 ttl=64 time=0.033 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_req=2 ttl=64 time=0.044 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_req=3 ttl=64 time=0.042 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_req=4 ttl=64 time=0.040 ms
^C64 bytes from localhost.localdomain (127.0.0.1): icmp_req=5 ttl=64 time=0.042 ms
The IP says its 127.0.0.1 (home) WTF is going on>. Why has PEGASUS been assigned 2 ips, and when pinging using HOSTNAME why does it point to home?
View 9 Replies
View Related
Oct 30, 2010
I've moved a linuxbox from being my gateway (nat, etc) to behind a new gateway (a DD-wrt router). For transparency purposes, I'd like to continue using the old box services, and just have the gateway in front of it.
Here's what I did:
The newgateway is setup for class C, 192.168.0.0
This configuration works, but sometimes it doesn't and I haven't figured out why yet.
At sometimes, clients on the LAN get throughput rates with very little speed loss (using speakeasy speed test). They will run at 33M on the LAN, running through both the newgateway, and the oldbox, and get about 35M with directly connected to the cable modem.
Other times, it seems nothing can talk with anyone, and I am not sure why.
I know what I have done is a little unconventional, but it's a transitional thing, and I am not sure it is the cause of the problem, although it was the last things changed.
View 2 Replies
View Related
Aug 1, 2010
My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies
View Related
