If I have a desktop with a USB wifi adapter connected to the internet through an ethernet cable, is it possible to create a wireless network using the adapter that will allow other users to connect to the internet through mine? I'm in a fairly low-tech place for the next few weeks and getting a router isn't likely.
If it's possible, anyone have links or instructions for how to do it?
- CAN connect to other computers - ssh and vnc over the home network (via D-link 524 router).
- CAN get an IP address via DHCP
- CANNOT get internet connections - including router at 192.168.0.1
- CANNOT even ping router (but I get an IP address - weird)
- Other computers on the network CAN access internet
- Live CD could not access internet
results of ifconfig
Code:
Code:
I am wondering if his ISP could be doing this - he has received a warning letter about bitorrent. Could the isolate a single computer behind a NAT router?
This is the results from dmesg:
Code:
I have tried:
- to set proxy settings as "Direct internet connection"
- disconnecting power to (including 30 sec wait): modem, router, computer + unplugging ethernet from computer
- Live CD (he only had an old one 7.10) which also didn't connect to internet, but as I am remote, I couldn't do any more. We are downloading a 10.04.1 iso for him to burn tomorrow, and will try that again.
- Uninstalled Crashplan which was the last software that we installed (and it was working ok).
I am currently ssh'ing into another computer on the network that IS working, and then ssh'ing into my Dad's computer - including a VNC session (tunneled through both machines and router).
Details:
1. Using XP Pro SP3 (32-bit)
2. Laptop = Sony VAIO VGN-FZ140E
3. Recently purchased a TP-Link Router (TL-WR740N) which claims to give 150 Mbps speed
When connected, my Intel Wireless WiFi Link 4965AGN shows a speed of only 65 Mbps . A friend came over with his laptop (having Windows 7) and was able to get 150 Mbps speed. I even compared and the same web sites were opening with considerable difference on our laptops. Do I need to upgrade the driver?
I have two Ubuntu 11.04 machines connected via cable to the same D link ADSL router. how do i connect one to the other so i can see from the other computer files and transfer them using nautilus?
View 9 Replies View RelatedI have built a linux router with a pc having two network cards. I am running ubuntu 8.10.
I have enabled forwarding on the router. One network (192.168.1.0/24)is connected to eth0 and another (192.168.2.0/24) is connected to eth1.
The interfaces have addresses 192.168.1.1 and 192.168.2.1.
On any side side of the network, I can ping both interfaces on the router.
However when I ping a machine on the other side of the network, I get 100% packet loss.
I have not touched iptables on the router or any machines.
What I am doing wrong?
i have two computer first one is the main computer, he is connected to the internet throught DSL ubuntu 10.10 beta installed
the second is ubuntu 9.10, and i want this computer to connect to the internet of the first computer
they both connected to a B-FOCUS router 270pr but i dont want to make the router to be the one that connects to the internet i want the first computer will connect to the internet and the second will be accessing the internet of the first computer connection.
i have two machines both on ubuntu 10.4 connected to a network via port switcher, 2 rj45 network cables auto eth0 is setup to share with other computers, i can ssh in and out of both, so the network is all running but i want to know how to share my single dongle internet connection between the 2 computers
View 4 Replies View RelatedWhile using Ubuntu two other computers lose their connection. One (main) is connected to the modem, other from the switch to the wireless router, and the one with ubuntu wired via switch. Currently connected with Windows 7, other two are connected. Once booted into Ubuntu rest of the computers disconnect?
View 6 Replies View RelatedI have an old HP pavilion laptop (2005) that was useless.I installed Ubuntu 10.10 on it and it became a working computer again. It was excellent, snappy, it was as if I had bought a lower end modern laptop.Internet was working great.I did not have any complaints (in fact, I thought that a modern computer running Ubuntu would beat my so adored macbook, speed wise). For some time I had 2 efficient computer, a macbook and the hp with the Ubuntu OS. So on the last weekend of February, my internet got extremely slow on both computers. After that annoying weekend (February 28) the internet on my mac was good again,however, the internet on my linux continued to be messed up.I tried disabling IPv6 on my machine and on firefox, tried the openDNS, the MTU stuff, but nothing.I even formatted my disk and installed ubuntu again (all this using the installation CD).However, apparently the installation CD uses some of your existing configurations (for example, the layout of the close, minimize,maximize:menu buttons on the corner of windows did not go back to default). So I'm guessing whatever was messed up with the computer didn't change back to default or the previous configuration when I first installed ubuntu. To give you an idea of how slow the internet is, installing alien (terminal installation),I got low speeds of around 150B/s (no typo here, it was bites, not kilo bites) and the fastest around 5,000B/s. The fastest I got was downloading chrome at 6kB/s but that didn't last even a minute. So given that these transfer rates are obtained both on firefox and the terminal, I'm assuming it is not a browsing problem.
A thick headed solution, would probably be to install windows again to get the network configuration to "standard" and then install Ubuntu formatting the disk again (using the CD).I'm using ethernet,so,thinking it might be cable problems, I did try to use the cable that was on my mac on the machine with linux. No success there.
I have an old laptop with wireless, 2 desktop computers without wireless and an Allied Telesyn gigabit ethernet switch (specifically AT-GS908GB). Is it possible to hook the 3 computers into the switch and use the laptop's wireless as the internet source for the other 2?
View 1 Replies View RelatedI have internet on my ubuntu machine (eth0) I am sharing with (eth1) My windows computers are getting IP addresses via DHCP from the Ubuntu Machine, and I can see (and use) samba/windows shares on all computers. Internet connection is not working on any of the windows computers.
I have eth1 set to "shared to other computers" under the IPv4 settings
I am using Fedora 11 all upgrades, wireless network WUSB54G network adapter. I can get to the internet but cannot get to any Windows (192.168.1.100) or Fedora 11 (...104) computers, printer (....101, 105). Here are the tests I have run.
[root@Fedora2 sbin]# ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.76 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=268 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1.63 ms
^C
--- 192.168.1.1 ping statistics ---
Trying to share my internet connection with other computers on my LAN. I've tried doing this with Debian, Ubuntu & Fedora so far...
My Intended Setup is as follows;
The Problem: So far I've not been able to get an internet connection from any computer connected to the HUB. I currenty have Fedora 13 on PC1 but have also tried with both Ubuntu 10.04 & Debian Lenny. I am open to using any Linux based distro on PC1 as long it has a Gnome Desktop. eth0 on PC1 can be Static or Dhcp, but I would prefer to set Static IPs on eth1 & all of the Client PCs
To the best of my knowledge I have enabled ipv4 forwarding in sysctl.conf (& some other changes);
Code:
All changes I made to the Firewall (all other Firewall settings are still at default, no custom rules added yet);
Router is set up to assign dhcp from 192.168.xxx.100 & 192.168.xxx.200
At the moment I have only 1 PC attached to the HUB. It's Ubuntu 10.04 (PC2)
It's details are;
ip 192.168.xxx.103
netmask255.255.255.0
gateway 192.168.xxx.101
Thus Far I can't ping 192.168.XXX.103 from PC1 & I can't ping 192.168.XXX.101 from PC2. (unreachable) I have an internet connection on PC1 (of course)
I have 2 10.04 computers and one win 7 and one vista computer: The win computers can see each other and the ubuntu computers, but the ubuntu computers cannot see each other or the win machines. The ubuntu computers connect to the internet fine and can ping each other. I cannot find settings to correct.
View 3 Replies View RelatedI get assigned an IP from the university's server. Every now and then, a student will plug in his router to the network trying to get wifi in his/her room.
And by doing so will start assigning IPs on the network, while rendering useless the university dhcp server, which has to cope with a higher number of pc's.
How can I specify to dhclient (or the linux system in general) NOT TO obtain IP addresses given by a specific mac address ?
just installed Ubuntu Netbook remix on my acer aspire one, and come across a problem Ive never faced before. Im able to Connect to my router (and access it through the internal ip address) but as soon as i try access anything outside of my network there is nothing!
This i found odd as first i thought it might have just been my Routers problem, but seeing as all my other computers were connected to it with no problems (wired and wireless) I quickly traced the problem back to the laptop.
After this i decided to see if after a simple update would fix the problem. so i connected it up through the Ethernet port once again it connects to the router but no internet! I have tried everything in my knowledge, but with no success!
I am trying to set up a basic router. I am running ubuntu server 10.04(just installed it today!) I have a verizon aircard(mobile broadband card) that is connected via usb. I am using wvdial to "dial-up" the connection. This works just fine and gives me a device on ppp0. There is a single lan connection on eth0 set up as a static ip address under /etc/network/interfaces. I don't even have any firewall running yet. For whatever reason, I can only get out on the internet when eth0 is set to get its ip address through dhcp. When I set it up with a static ip, I get for example:
$ping 4.2.2.2
From 192.168.1.1 icmp_seq=1 Destination Host Unreachable.
$ping google.com
ping: unknown host google.com
If, however, after I have booted and the wvdial has been started, I set up eth0 as dhcp, run /etc/init.d/networking restart, set it back as static, run /etc/init.d/networking restart again, all work well. When I reboot the system with the static ip on eth0, and connect to wvdial, I get no internet again.
My internet works fine if I plug directly into the modem, but if I go through the router either using ethernet or wireless it doesn't work. I can access the router perfectly when using wireless and change settings and all that but cant access the internet. From what I've read it isn't a DNS issue because I cant get a result from pinging an ip, so I think it may be something firewall related but I'm unsure.
View 2 Replies View RelatedI am connected to my wireless network but can't connect to the internet. I have searched the ubuntu forums for solutions but none seem to work for me. I can post terminal outputs if required (I know that much).
View 8 Replies View RelatedHow can I find the IP of a router wirelessly so I can use the second router for a better signal? (A farther reaching wireless card is what im trying to make it do)
also how can I find the subnetmask this way?
My router is a Netgear router with Comcast, and after going on Ubuntu for a couple hours just doing normal things, the Internet disconnects. Then I have to restart my computer and start everything over again. I check the router and everything seems to be fine, I even unplug everything on the router first (like I am instructed to do so if this sort of thing happens) to make sure that's not what is causing the problem. It has to be the Ubuntu system.
View 4 Replies View RelatedI am dual booting XP and Ubuntu 10.10 64bit on a Dell Latitude E6410 and I have a Linksys WRT120N router connected to my Modem.
So the weird thing is, under XP I can use the internet while connected to my router. Under Ubuntu I can't use the internet while connected to my router. But I can use the internet in Ubuntu if I connect to my neighbor's router called "linksys". So something happens when I connect to my router that makes Ubuntu not able to access the internet. But if I'm connected to my Neighbors router or if I use XP while connected to my router I can use the internet.
I have been using Ubuntu for about a year, so I'm getting better but still a noob. I've tried to figure out what's going on by looking at other forums and posts and trying to see if anyone has solved this. So far I've had no luck. This is also the first of many problem I have encountered that I have been unable to solve using online posts, and is the first problem that I have had to resorted to creating a post to try and fix.
I'm running a Natty machine wired to a TP-Link router (TL-WR841N) with additional Ubuntu and Windows machine on WiFi. Recently I've had some problems with connectivity on the Natty machine. Connectivity is fine as far as the router, but not beyond it. This applies to all browsers, Software Center, Aptitude and anything else you can think of. Now, normally at this point I would call my ISP, but the thing is, all other machines have connectivity. I've checked the cables twice and anyway, if it were them, I wouldn't be able to ping the router. Router has ping functionality to outside and it's working, have tried ubuntu.com and google.com. Also, connectivity between the wired and wireless machines is fine, pings are flying across the network beautifully.
View 5 Replies View Relatedis there a possibility to connect to my router admin zone from internet using wan ip? from lan I can do that using 192.168.x.x IP but when Im in work and something go wrong at home how can I check configuration of my router from outer world instead of lan?
View 7 Replies View RelatedI'll state the issue and then give whatever extra details are needed. I'm running Ubuntu 10.xThe Linux box is connected to a router via ethernet. That Linksys router is bridged to an AT&T router.The bridging is working fine. The AT&T router's page shows the IP of the Linux box and lists it as a device. The Linksys page shows no errors with packet transmission and receipt. I can ping the Linux box from any client on the AT&T router, and can ping the AT&T clients from the Linux boxI had set the IP of the Linux box to192.168.1.201 while configuring that router, as I had set that router to 192.168.1.200 and it just seemed orderly.The network preferences show eth0 being set to auto dhcp, but the IP is still set to .201 so I don't know that it actually released or renewed.
View 5 Replies View RelatedI've installed ubuntu 9.10 64bit onto a usb flash drive and found that even though I can connect to my safecom adsl modem/router I can't get an internet connection, the previous versions work and it works with a Linksys router. Is this a known issue with a fix?
I'm using a Toshiba satelite pro!
I have a dual-boot desktop with Windows 7 and Ubuntu.Problem: Linux does not recognize my D-Link DWA-131 Wireless N USB Adapter. So, I can't access my wireless router or the internet.D-Link has a Linux driver for the DWA-131 posted on their website URL...that includes a readme file with long, strange, convoluted instructions on how to install the driver.
View 9 Replies View RelatedI'm a beginner in Ubuntu, I'm using Ubuntu 9.10.
Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.
My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.
Every time I turn on my ubuntu box, it somehow kills our internet connection... yes, even through the router. The internet will not work until I call tech support and they run a line test. Then it works again as if by magic. I'm at a loss. A friend suggested maybe ubuntu is trying to establish itself as the dhcp server on the network? I have ubuntu 9.04, 32-bit, workstation.
View 2 Replies View RelatedI bought a wired broadband dsl router to provide another layer of security for my computer running ubuntu. I just plugged it in without installing any software etc. It blocks the internet connection.
View 3 Replies View Related