I have a MSI CX600 notebook with a :Ralink 802.11bgn 1T1R Mini Card Wireless Adapter (this name appears in WIndows 7)Can anybody tell me how to install it on Ubuntu 9.10,because I don't have internet connection.
View 3 RepliesI have installed a wireless card in my Ubuntu 9.04 System. When I start Firefox, it keep searching for a while and it cannot connect to the internet. I have attached screen shots of network connections. When I type the address of the router in the browser address window, it cannot access the router.
View 2 Replies View RelatedI'm working with 10.10 (Maverick) on an older Compaq laptop. Wireless card is a Cisco Aironet 350. This card is listed as supported and drivers included in the server distro.
During the Network configuration portion of the install, I selected eth1 (wireless); the card came active and a valid network connection was established.
However, after the full server installation the interface (eth1) is not seen.
What's confusing is that modprobe -l shows the drivers as present:
kernel/drivers/net/wireless/airo.ko
kernel/drivers/net/wireless/airo_cs.ko
Insertion and removal of the card is noted in /var/log/messages:
pcmcia_socket pcmcia_socket1 pccard: card ejected from slot 1
pcmcia_socket pcmcia_socket1 pccard: card inserted into slot 1
(I'd be happy to supply more info, but currently set up with Fluxbox and I'll be darned if I can get copy from the xterm to paste into Firefox...)
I have installed Fedora 14 on my new laptop Thinkpad T410 but the wireless card is not detected.
I tried to install the drivers but got error. How to install the driver.
[root@sheril sheril]# lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) .....
I have no idea where to start when it comes to wireless networking. I am working on my home laptop computer that I have set up as Ubuntu Server 10.04. I don't even know if my wireless card is installed or not. Where do I start with all of this? I have no gui (runlevel 3 only) and The network I want to connect to has no security.
Code:
root@lappy:~# uname -a
Linux lappy 2.6.32-25-server #44-Ubuntu SMP Fri Sep 17 21:13:39 UTC 2010 x86_64 GNU/Linux
Code:
root@lappy:~# lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) .....
I am a new member and new as well to ubuntu. I've installed the ubuntu 9.10 karmic koala in my laptop (fujitsu siemens amilo pro v3405). Installation went well but it did not installed my wireless card, I think. I checked my wireless card model and it is a intel pro/wireless 3945ABG. I have downloaded it and saved it in the downloads folder but I don't know how to install it?
View 2 Replies View RelatedI have a Dell Vostro 1500 that has a Broadcom BCM4312 wireless card installed. I do not have access to a wired connection to the web so any thing I have to install is a download on my windows machine and then transfer that to the debian machine. I just finished installing Debian Squeeze but can not get my wireless card to scan for any networks. I found a tutorial at [URL] and followed the steps there. Finding all the dependances and installing them one by one (took me all day). My wireless card still will not scan for networks. After doing a 'sudo ifconfig eth1 up' it still will not scan for networks.
Output from ifconfig:
raygo75@RayGo-2:~$ sudo ifconfig
eth1
Link encap:Ethernet HWaddr 00:16:44:9b:e9:cc
inet6 addr: fe80::216:44ff:fe9b:e9cc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17 Base address:0xc000
lo
Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:28 errors:0 dropped:0 overruns:0 frame:0
TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1900 (1.8 KiB) TX bytes:1900 (1.8 KiB) .....
How do I get around this? It wants to get something from [URL] and I do not have internet access. It looks to me like it just wants to download the wl dirver, again, which I have done in the previous instructions I found. I am a retired UNIX (hp-unix) administrator so I know my way around the system.
I have installed Lubuntu on my dell Latitude C400. Recently I had Unbuntu, but my system was to slow for it. The wireless worked when I installed sl-modem-daemon_2.9.11~20100303-2_i386.deb, however this does not work with Lubuntu. I have used the ndiswrapper to install a driver from windows, and still it is not installed.
After iwconfig i get
lo no wireless extensions
eth1 no wireless extensions
The other problem is this laptop has no cd dive and the ethernet connection does not work, so I can t do updates.
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies View RelatedJust installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
I have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies View RelatedI have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedI installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
have a dell Inspiron 1501 with ubuntu 10.0.4 I want to rename my wireless card from eth1 to wlan0 as I use conkyrc and it will not read my wireless strength or my ssid cuz it thinks it's a ethernet card and not wireless card. I know this for a fact because peppermint os my wireless card was wlan0 and it worked just fine.
View 1 Replies View RelatedHow do I install the correct driver for my Ubuntu 10.10 system for the AR9285 wireless card? code...
View 2 Replies View Relatedso I had to reinstall Ubuntu.But now my Wireless card won't work. It used to work before (plug and play), and I have no problem with it when I boot from the CD.I cannot use my cable connection because as soon as I plug my computer in, the network crashes, the router doesn't respond, gets hot and refuses to work until I unplug it and let it cool off for 2 minutes.I'm using Ubuntu 10.10, Desktop PC.
Code:
:~$ lsusb
Bus 001 Device 002: ID 0846:4260 Netgear, Inc. WG111v3 54 Mbps Wireless [realtek TRL818B]
[code]....
I have been searching through these forums the past couple of day as I have just installed Ubuntu 9.10 64bit on my custom whitebox. I have had windows 7 on it in the past, but want something different now.
I guess my main question is if anyone knows a simple to install wireless card (pci or usb) for ubuntu 9.10 64. I currently have the Netgear WG311V3 PCI card installed, but I can not for the life of me get it to work under Ubuntu. I have tried numerous different methods from search google, these posts, etc. but I can not get any of them to work.
I just upgraded to natty last night, and everything is working fine except for the network manager. I can enable and configure the wireless card via bash, but the network manager widget will not manage the wireless card.
When I first boot up, the "Enable wireless" check box is greyed out. After I enable the card via the terminal, the "Enable wireless" check box becomes ungreyed, but every time I click it, it instantly unchecks itself. I feel like Currly from the Three Stoogies. Check, uncheck, Check, uncheck.. "Slaps face repeatedly."
I installed newest Ubuntu system, 11.04, Natty-Narwhal, and PC is running smoothly. It is solid machine, Celeron 430, 1 gb of DDR2 memory and I have both LAN card and graphics integrated on the mobo which is MSI 7529, based on G31/P35/P31 chipset.
I plugged lan cable directly from my PC to the ADSL router. There is another Win Xp machine on the same router and it has connection, and internet is working fine. Right now Im writing from the Win 7 laptop, which is connected to the same router via wifi link... all working like a charm...
But, when I plug the Ubuntu desk I cannot get access to bot lan and internet...
I searched the net and it seems that ubuntu didnt install proper driver during the OS installation. Here are some diagnostics of the current config and state:
Code:
Module Size Used by
binfmt_misc 13213 1
snd_hda_codec_realtek 255820 1
code....
As you can see I need to install driver named r8101 instead this one r8169 and I think it will work that way. I found driver here only problem is dont know how to replace them.
I install 9.10 dual boot on a vista pc. Ubuntu appears to be running however it is not seeing wireless networks. I have the pc icon with an x. I tried help and was directed to Terminal where I thought I followed the instructions and ended up with information about my adapter displayed. When I run Vista I have all wireless networks listed and can connect. Ubuntu does not show any wireless networks available. I tired going back over the install but do not see that I missed anything. I get the sense that this may be something simple.
View 2 Replies View RelatedI've bought an RALINK getnet Wireless USB adapter and am trying to get it to work on a dual boot pc running XP and 9.10. According to the forums and the manufacturers website (www.getnet.com.tw), this should be supported in Linux.
Using the disk that came with it, I have gotten it to work in Windows. I've spent nearly a day scouring the Ubuntu forums and trying different things, but still haven't got it working in 9.10. (I think that most of my confusion is that many of the threads are for earlier versions)
If I type "iwconfig", I get this:
Code:
graeme@graeme-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
[Code].....
I have the CD that has a LINUX directory, but am not sure what to do with it. Through other threads I have determined that my drivers are rt2870.sys and .inf and have downloaded these. I'm not really sure what to do with them next..... Many threads talk about going System>Administration>Networking, but I don't have this as an option. I have however got an option which I downloaded called "Windows Wireless Drivers" which seemed to let me load the rt2870.inf driver, but then says "No" after it (not very helpful).
I have enabled Wireless Networking, and added my SSID etc etc, but I still don't connect.
I just downloaded ubuntu 11.04 and installed it and everything off of a cd and now I cant connect to internet wirelessly! My WiFi button on my laptop is orange and I press it and it doesn't go blue like it normally did when I had windows vista. I just updated my wireless driver off of ubuntu and restarted and nothing happened! its still not connecting me to the internet, I only have access through the ethernet I am using. I cant go ethernet, this is only temporary and I really want ubuntu, I really need it, but its not letting me go wireless. My wireless driver is this: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)
View 2 Replies View RelatedI want to buy a wifi card that will, hopefully, be rock stable under my kubuntu 10.04 64 bit. Currently I have TP-Link Atheros card and stability in Linux is horrible. Please DO NOT give me links to compatibility list. Just suggest a network card that is most likely to be stable with least manual tuning effort required.
View 2 Replies View RelatedThinking of getting a wireless pci card for a desktop and I have seen a lot of people have issues with specific wireless cards. Is there a particular card or chipset that will be relatively painless to use?
I have seen this question asked before, but have not seen any replies.
I bought a netbook and couldn't handle windows xp at all, so installed ubuntu 9.10, but the wireless network icon doesn't appear on the top of the screen like it should, presumably because ubuntu doesn't automatically recognize whatever card is in there. This is an asus 1001-HA. could anyone assist me with getting this thing up and running on a wireless network?
View 9 Replies View RelatedI've read a lot about wireless network cards but I haven't found something similiar to my problem. I've a belkin wireless card F5D7000tt and its driver bcmwl5.inf. I think I've correctly installed it because when I use "ndiswrapper -l" i get:
WARNING: all config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future realease.
bcmlw5.inf: driver installed
device (14E4:4320) present (alternate driver : ssb)
But when I go to Hardware Drivers I see that "Broadcom B43 wireless driver" is not enabled, and when a try to enable it I get an error message:"We are sorry, but the installation of this driver failed. Check the register archive to see more details: /var/log/jockey.log"
Iv just installed 10.10 but my wireless doesnt seem to be working.Iv checked that the physical switch is on at boot (since that used to be a problem with previous releases) but to no avail.
View 3 Replies View RelatedI have no internet available, but the driver seems to be installed (kernel driver r8169). I'll follow the steps for posting on the wireless forum this time:
1) I'm using a desktop. Intel Core i7-870 2.93Ghz 8md Quad Core. Motherboard is an ASRock H55M-LE LGA1156. 4GB RAM DDR3.
2) The wireless card is:
p { margin-bottom: 0.08in; } 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: ASRock Incorporation Device 8168
Flags: bus master, fast devsel, latency 0, IRQ 28
I/O ports at c800 [size=256]
Memory at cfdff000 (64-bit, prefetchable) [size=4K]
[Code].....