I've a weird problem about my honeypot project. All start from installation until running process is going smoothly but when I try to ping my honeyd vm from honeyd host it couldnt but it can be ping from other machine inside my local network. I am also usinng arpd for ARP request reply and standard honeyd config.
View 1 Replies
I have Linux server with VMware Server 1.0.8. When I creating a virtual machine, I can not "send" a PING to the virtual machine. In the virtual machine, I have installed CentOS 5.3 (32bit). In the virtual machine I have defined the addresses IP. So, whey I can't "sent" a ping to the virtual machie? I have to set something on the Linux server?
View 3 Replies View RelatedRunning Fedora 10, I installed CentOS 5 in Virtualbox, but I can't ping the Virtual Machine...
From within CentOS, I can ping my laptop [known as the host?] but from the laptop I can't ping the CentOS Virtual Machine. I tried turning off the firewall on both too... CentOS was able to access the internet through my laptop right away without any configurations too.
Unless someone has an idea to resolve the above, I am also wondering about something else VirtualBox-related:
To see if it was possible to get around the above issue, I was going to install another CentOS virtual machine to see if I can get them to communicate both ways [if at all], but to do so, I think I have to install CentOS AGAIN on another allocated amount of hard disk space. This will take some time, so I was wondering if anyone knew if it was possible to just create a quick duplicate of the previous installation, if you wanted 2 different virtual installations of the same OS.
I am very much new to linux environment and I have a final year project of emulating services on Honeyd. I don't know how to install honeyd on Centos virtual PC. I will be very obliged if someone guide me.
I tried to install honeyd as mentioned on different websites but it is constantly giving me errors.
I have an ubuntu kk laptop connected via wireless to my mixed network (xp, win7, other ubuntu), but i can not ping said machine or connect via ssh. Internet and smb-browsing ON this machine work, as does pinging FROM it. If this was a windows machine, I'd say a firewall is in the way, but since it's a vanilla karmic install, this should not be the case (or should it?).
View 2 Replies View RelatedI have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
I have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).
I have an ubuntu server that I am using as a gateway router. I have 2 nics in the machine and am using iptables to run the NAT.I now have a need to provide several machines on the inside of the network with their own public IP. So I created a virtual interface on the the WAN card and attempted a 1:1 nat across it, but it's not working. The virtual interface isn't even responding to pings. If I ping the ip of the virtual interface from the outside, it doesn't work. If I run a tcpdump on the interface, I can see ICMP request packets but no replies. Watching the same dump while pinging the non-virtual interface IP results in both request and reply packets. What's stranger the inbound ICMP request packets on the virtual interface seem to be hit or miss. Sometimes when I ping it, I can see the request packets hitting the interface, sometimes I get nothing.
View 1 Replies View RelatedMy Eth0 has 3 virtual Ethernet (eth0:1, eth0:2, eth0:3)
Eth0 -> 202.1.1.1
Eth0:1 -> 202.1.1.2
Eth0:2 -> 202.1.1.3
Eth0:3 -> 202.1.1.4
I am unable to ping them (202.1.1.2 - 202.1.1.4) from Client's PC.
Operating system: Debian Lenny 5.08 (2.6.26-2-amd64 #1 SMP Tue Jan 25 05:59:43 UTC 2011 x86_64 GNU/Linux).
I have a network iface eth0 with 2 virtual IP addresses (117.20.2.111 117.20.2.112). The virtual IP addresses I have setup by simply running:
Code:
ifconfig eth0:1 117.20.2.111 up
This has worked fine for 2 virtual IP's but the third one (117.20.2.133) will not respond to ping's though it does respond to arpping's. There are no firewall iptable rules:
Code:
iptables --list
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Output of route -n:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
117.20.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
117.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0
0.0.0.0 117.20.2.1 0.0.0.0 UG 0 0 0 eth0
Output of ip rou ls:
Code:
117.20.2.0/24 dev eth0 proto kernel scope link src 117.20.2.110
117.0.0.0/8 dev eth0 proto kernel scope link src 117.20.2.111
default via 117.20.2.1 dev eth0
I am using f13
Quote:
$ uname -rsmi
Linux 2.6.33.8-149.fc13.i686.PAE i686 i386
I am using a dhcp network. Problem is I can SSH/ping to my machine but can't SSH/ping to my machine from the remote one(In internal network of my lab). What to do? I understand this is very little information....but I dont know what to provide.
Have installed fedora 14 on a HyperV virtual machine, have added a Legacy network adapter in the Hyper-V settings for this virtual machine that fedore pics up as eth0. I'm pretty sure this card is able to pick up an IP address from a DHCP server on our network but I'm unable to ping any boxes from this fedora virtual machine or ping the fedora machine from another box on the network. I have tried to disable the firewall and SELinux incase it was that stopping the pinging each way but that didn't help.
View 1 Replies View RelatedI installed apache2 on my Ubuntu machine and I am trying to access the server from another subnet. The server is connected using ethernet and has a static ip address. I can ping from the server to any machine in the other subnet but non of the machine on that subnet can ping the server. iptables does not seem to be running
Code:
# service iptables status
iptables: unrecognized service
and its rules are
Code:
# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
[code]....
What is preventing my machine from being accessed from the other subnet?
I have eth1 and eth2 connected with back to back cable on the same machine.
I configure eth1 with 11.11.11.11 and eth2 with 11.11.11.14.
I use ping -I eth1 11.11.11.14, I get Destination Host Unreachable...
using tcpdump on eth1 shows ARP request broadcast being sent out
using tcpdump on eth2 shows ARP request received, no ARP reply being sent out
Not sure whether this config is supposed to work?
I am running ubuntu 10.04 on a VMWare Server virtual machine. I have assigned the ubuntu machine an ip address of 192.168.17.101. The ip address of my Windows machine hosting the Ubuntu VM is 192.168.17.100.
From the Ubuntu machine, I can ping all other machines on the local subnet. But when I try to ping the ubuntu machine, it does not get a reply.
I have a clean, plain install and the only software I have installed is Nagios.
This is the scenario: gentoo box (distro shouldn't be relevant here) and win7 box. Gentoo box is dhcp and dns server, via dnsmasq. From win7, I can ping gentoo by both ip and name. No problem there. From Gentoo, I can ping win7 by ip, but not by name. The dnsmasq log seems to receive the name ok, it's "Tere-PC". I have been looking around for many hours now and I know there must be something simple I am not taking into account.
Code:
dnsmasq-dhcp: 55480937 available DHCP range: 192.168.0.50 -- 192.168.0.150
dnsmasq-dhcp: 55480937 client provides name: Tere-PC
dnsmasq-dhcp: 55480937 vendor class: MSFT 5.0 .....
Code:
# ping Tere-PC
ping: unknown host Tere-PC
Is there any way that dnsmasq, which is supposedly a dns server, will link this name to the given ip?
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies View Relatedi have installed linux debian in my computer but i have aproblem , i have a ping only on my computer itself , not to gateway or other computers on my network .
Ip : 10.0.88.9
Gateway : 10.0.88.1
dns :10.0.88.7
note:when i have installed system i have no internet connection so it is not installed updates
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
I have a linux machine with 2 ethernet ports(eth0 and eth1). eth0 is connected to a router which assigns it an IP address 192.168.1.2. eth1 is connected to a switch and I assigned it an IP address 192.168.1.254 using "ifconfig eth1 192.168.1.254 netmask 255.255.255.0 up". How do I ping eth0 from eth1?
View 5 Replies View RelatedI am trying to ping my Windows machine connected to an open network (I'm at a internet caf) from my linux VM (also connected to the same network with a usb adapter), but I'm obtaining this output:
# ping 10.23.47.12
PING 10.23.47.12 (10.23.47.12) 56(84) bytes of data.
From 10.128.128.1 icmp_seq=1 Packet filtered
From 10.128.128.1 icmp_seq=2 Packet filtered
With high probability host 10.128.128.1 is a firewall or some router with packet filtering mechanism; but I don't understand how it can be possible to implement this kind of solution, with what kind of software or hardware? I also tried a nmap scan to my Windows machine but it returns me scan results from another host(the firewall or the router I suppose):
nmap -sS -O -P0 10.23.47.12
Starting Nmap 5.51 ( http://nmap.org ) at 2011-07-09 15:46 CDT
Nmap scan report for 10.23.47.12
Host is up (0.097s latency).
All 1000 scanned ports on 10.23.47.12 are filtered
[Code]...
So my questions is, how is technically possible to implement this kind of restriction within hosts connected on the same network? It's the first time I see this kind of configuration.
I have a 10.04 on virtual machine (VMWare) Network card is bridged. I wanted to change the connection from DHCP to static IP. Tried both ways already:
[Code]....
The connection is established and ifconfig shows the correct IP, but nobody can ping me and i cannot ping anybody!! I have no connection to the internet.
Code:
vm_ll@me:~$ ifconfig -a
eth1 Link encap:Ethernet HWaddr 00:0c:29:e6:87:69
indirizzo inet:10.1.1.45 Bcast:10.1.1.255 Maschera:255.255.255.0
indirizzo inet6: fe80::20c:29ff:fee6:8769/64 Scope:Link
[Code].....
I am a linux beginner and dont know that much about networks! I have access to a linux VM. The machine is remote and i access via putty. If i can access this machine via SSH and putty, is there any reason why i should not be able to use ssh tunnelling to connect to a vnc server?
I don't know the details of the server and what firewall is set up but i believe that tunnelling uses port forwarding over the ssh connection that is already set up. Where does the port forwarding actually occur? At the actual linux VM or on the router the VM is connected to?
I've forwarded incoming connections on port 25 to my virtual machine with the following commands:
sudo iptables -t nat -A PREROUTING -p tcp -i eth0 -d 10.1.1.3 --dport 25 -j DNAT --to 192.168.56.101:25
sudo iptables -A FORWARD -p tcp -i eth0 -d 192.168.56.101 --dport 25 -j ACCEPT
The strange thing is the connections coming through in the virtual machine seem to be getting dropped. A port scan from the internet says the port is closed, but it is not the case as I can see the connection coming through. As you've probably worked out, I am running a mail server. When I send myself test mail, the connections from the senders mail server also gets dropped.
I have removed Network Manager Gnome from my Ubuntu which is a virtual machine(Guest OS),I see the internet is no more running inside this Virtual Machine.While in other Virtual Machines (Other Linux) I had not removed Network Manager Gnomeand I see internet is running fine in them.
View 3 Replies View RelatedI'm running Red Hat as a virtual machine on VMWare and the network configuration on VMWare is a bridge and i have had this problem, some times does not get network o others do, i have verified code...
View 2 Replies View RelatedI installed a minimal ubuntu (minimal.iso) on a virtual machine (vmware) on my windows pc using following packages:
Code:
sudo apt-get install install gnome-core gdm network-manager-gnome human-theme x11-xserver-utils tangerine-icon-theme gnome-themes-ubuntu ubuntu-artwork jockey-gtk gnome-utils firefox
I'm using the Ubuntu VM as my local http server. It is reachable via ip - so http://IP-ADDRESS works. I also use samba for shared folders... but ubuntu is not listed in my network. What means that i cannot access files from outside the vm. Do I have to install further packages, because "normal" ubuntu distributions are listed in my network connections. Samba packages are correctly installed.
I am using Ubuntu 10.04, 64-bit. I am trying to set up a virtual machine on it using vmbuilder. As I understand, I need to set up bridging. If I set up br0, then I cannot get out of the machine. Even a ping to 192.168.1.1 (my gateway) comes back as network unreachable. If I comment out #auto br0, then I can get out (on eth0), but i get an error from libvirt. My /etc/network/interfaces file (eth0 networking works, but libvirt does not):
#auto eth0
#iface eth0 inet dhcp
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.154
netmask 255.255.255.0
[Code]...
I am currently running ubuntu on a qemu-kvm virtual machine, and the host is fedora. I would like to mount a folder of the host machine on my VM, but never succeeded. The result of the command is :
root@armnlib-kvm:~# mount -v 192.168.1.10:/nfs /nfs
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Thu Jul 7 06:02:43 2011
mount.nfs: text-based options: 'addr=192.168.1.10'
[Code]....
I had been running my SMTP server with WINE, as the SMTP server software is a Windows-based program (MERCURY), but I cracked the shits with WINE and removed it. Now I am running my SMTP server in a Windows virtual machine.This virtual machine has a different IP address from my host machine, so what I need is for my computer (the host) to redirect incoming traffic on port 25 to the virtual machine at 192.168.56.101 on port 2525.Can someone please help me with it? I think its done with iptables.
View 1 Replies View Related
