Ubuntu Networking :: Set Installed Realtek Drivers Permanently?
Sep 1, 2011
I've had some hiccups with my the wired connections on my new ASUS M5A88-M motherboard, ethernet card is a Realtek 8111E. The default drivers keep giving me an unstable connection - keeps starting and stopping. I figure it must be the drivers since the connection is fine when I boot to the windoze os. I went here and downloaded the "LINUX driver for kernel 2.6.x and 2.4.x (Support x86 and x64)" file. Untarred and ran the .sh. Checked speedtest.net and the result was almost a mirror, if not better, than when I did speedtest on the windoze os. I read this thread here which gave me some insight. The .sh appears to have replaced a r8169 driver with the one I downloaded, r8168. But when I restart, it reverts to the r8169 driver.
View 3 Replies
ADVERTISEMENT
Oct 7, 2010
How is it possible to use both r8168 and r8168 nic drivers
I have both cards on motherboard (one pci and another pcie).
when installing one driver instruction suggest to remove another...
this is what I have found, without solution
View 2 Replies
View Related
Feb 12, 2011
Just made the jump to Ubuntu, and until this install I considered myself very tech savvy. Now not so much! Built my new desktop, loaded Ubuntu 64 bit no problem. But I'm having a terrible time figuring out how to load the native driver for my realtek wireless adapter. I successfully un-tarred the file, and used the terminal to run the make command by using cd command to navigate to the file. It returned a wall of text, and in my mind looked to work. Next I go to run "./clean" in the same file location in the terminal and it returns:
"ERROR: Module r8192s_usb does not exist in /proc/modules
ERROR: Module ieee80211_rsl does not exist in /proc/modules
ERROR: Module ieee80211_crypt_ccmp does not exist in /proc/modules
ERROR: Module ieee80211_crypt_tkip does not exist in /proc/modules
ERROR: Module ieee80211_crypt_wep does not exist in /proc/modules
ERROR: Module ieee80211_crypt does not exist in /proc/modules
Not completely sure if this is an issue, I try moving to the next step of instructions issuing the command "insmod 8712u.ko" in the terminal same file location and get the error message
insmod: error inserting '8712u.ko': -1 Operation not permitted
I've tried running "sudo insmod 8712u.ko" from both that file directory, and from my home file directory. My guess is I'm missing a step or need to be typing these commands in a different file directory in the terminal.
View 1 Replies
View Related
May 22, 2011
I installed Ubuntu 11.04 on my mom's Inspiron 1521 and before I had it on there I had a older version of ubuntu which worked fine and could connect to the Internet, but since my mother isn't that well educated in computers and wants a simple to use UI, Ubuntu came into mind.
Well after installing ubuntu for a hour or two and trying to configure the drivers to allow Internet access with out a USB adapter using the BCM4311 I tried everything such as following the pretty basic tutorials online on installing the drivers with no luck. I check the additional drivers application and it's telling me the drivers are installed properly and are okay. ... Well, why am I not able to find a list of wifi connections yet?
I did the update command and updated every package on the machine. I reinstalled the kernal drivers for the BCM4311. I even installed the installer for the kernal device and nothing seems to be working.
View 4 Replies
View Related
Apr 28, 2010
does anyone know if the realtek wireless card driver issues have been sorted? It is just so annoying not being able to use Ubuntu on my laptop when all my other PC's are running it.Looks darn good though doesn't it
View 9 Replies
View Related
Feb 18, 2010
I'm having problems getting the wifi to work on my toshiba satellite pro l40 (psl4be). My laptop has a wifi card built in but linux cant seem to be able to find it. I tryed following these instructions and i got this output:
Code:
james@james-laptop:~$ lsusb
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 0bda:8197 Realtek Semiconductor Corp.
Bus 006 Device 001: ID 0000:0000
[Code]...
as you can see its telling me i have no wifi card, even though i am fully aware i do. ive tryed using ndiswrapper to install the windows drivers of the ethernet adaptor but my wifi still doesnt work, im guessing ethernet has nothing to do with wifi.I intend to convert from windows, however if i cant get the wifi to work i can only see linux at a major disadvantage as i use my wifi alot.
View 9 Replies
View Related
Jul 21, 2010
I have an HP Pavilion Dv6-1230US laptop that I bought from staples when it was on sale for 800 dollars with a 4 year accidental damage warranty. It came with Vista Home Premium 64Bit installed. It had Windows 7 Business 64Bit on it at one point, And the latest windows installation was Windows Vista Business 32Bit. My trial period ran out on vista and I switched to Ubuntu 10.04 32Bit, and, as always, I have a problem with the wireless card. I have looked it up and everything, i do have the drivers installed, and it looks functional, but its not. It will act like its going to connect to my AP (Netgear WNR3500L that is like 2 days old), but it eventually askes me for my WPA2-Personal AES key, which I have supplied, and is correct before hand, i type the exact same thing in and it still doesn't work.
I've tried sudo apt-get update, and sudo apt-get upgrade, but it doesn't work. nothing has to update. This installation was installed today, and updated about 6 hours ago to the fullest extent.The wired works absolutely perfect (that's how i updated it). Hardware:Laptop has a Broadcom 4322AG b/g/draft-n wireless card from HP integrated into the laptop. The router is a Netgear WNR3500L which i bought because we are switching ISP's soon and our old router is a modem, that will only work on a DSL connection.
View 3 Replies
View Related
Jul 3, 2010
I have a Broadcom B4312(I believe) wireless card and installed the drivers for it, but under the Wireless tab in Network Connections, it doesn't show "wlan0" or anything similar to "eth0"(which it shows under "Wired"). I ran iwconfig and this is what I got:
[Code]....
View 9 Replies
View Related
Jan 6, 2011
is how I added the RealTek 8188CE (or other RealTek drivers) to my newly installed Fedora 14 on a Toshiba Satellite L645D-S4056 laptop. This is assuming you have performed a regular install of Fedora 14 and have done nothing else.
1. Download the drivers at the RealTek download page here:URL...Search for your model in the "Download Search" box and selecting the Linux version of the software. In my case I typed in 8188CE and selected RTL8188CE (Software).
2.Extract the downloaded file into the desired location, open a terminal window, and navigate to the folder where you extracted the drivers.
3.Enable Sudo using the following command:su -echo "username ALL=(ALL) ALL" >> /etc/sudoers.Where "username" is your account username.
4.While still logged on as root, type in the following to install gcc and the kernel headers:yum install gcc kernel-devel kernel-headers patch make exit(From this point you really only have to follow the readme.txt instructions in the drivers folder, but I'll add them here)
5.Change to Super User sudo su
6. Compile driver from the source code make
7. Install the driver to the kernel make install reboot
View 5 Replies
View Related
Dec 3, 2010
I am wondering if there are working realtek drivers for 11.3 and where to get them? I went to realteks site but only found drivers for linux 2.6 and i dont know if they will work.
View 9 Replies
View Related
Jan 13, 2011
I have installed Fedora 14 on my new laptop Thinkpad T410 but the wireless card is not detected.
I tried to install the drivers but got error. How to install the driver.
[root@sheril sheril]# lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) .....
View 1 Replies
View Related
Jul 4, 2011
I'm using Xubuntu Natty at the moment, on an Acer Aspire 5739G. Figured I would go to Realtek's site and get the most recent soundcard driver, since the built-in subwoofer has never worked on Linux for me.
I used the automatic install script, then when it tried to probe for other devices, suddenly I had no sound.
I'm currently getting
Code:
korin@corrosion:~$ aplay -l
aplay: device_list:240: no soundcards found...
I tried reinstalling the ALSA driver, but to no avail. I now have no sound, and no idea a) why this failed, and b)
View 3 Replies
View Related
May 6, 2010
I am trying desperately to get my wireless n adapter to work. I had it running sporadically with ndiswrapper for some months now (it was always unreliable). Now I was very optimistic, when I found new driver sources from Realtek directly: Realtek I understand the DWA-131 is based on the Realtek 8192su chipset. Unfortunately the build fails:
[Code]...
View 4 Replies
View Related
Feb 9, 2010
How to install Realtek 8139 Ethernet driver? I tried downloading from realtek website. there is no driver for Realtek 8139. Although i downloaded the driver for 8168 for Linux, i could not install it after uncompressing the tar file
View 1 Replies
View Related
Jul 5, 2010
I have compiled the proprietary nvidia drivers for 11.3. When I boot, even using the nomodeset boot option, the nouveau module still loads, causing gdm/X to fail. I am able to manually remove the modules with rmmod and restart gdm. Everything then works normally. I have added the line "blacklist nouveau" to both 50-blacklist.conf and 99-local.conf in /etc/modprobe.d
View 7 Replies
View Related
Nov 7, 2010
BackTract 4. Can't get my Realtek RTL 8188SU installed. Though it's inserted, the command "iwconfig" results in no wireless device.
View 2 Replies
View Related
Apr 16, 2010
When i was on the live cd installing ubuntu it said i could install my driver but now that i am running off the hard drive it doesn't pick it up under "Hardware Drivers"
View 3 Replies
View Related
Mar 15, 2011
I have a laptop with 2 graphic cards on it, currently I have the nvidia drivers installed, and I want to install the Intel ones, but when I try to install I am prompted to remove the nvidia ones.
I have a module to turn off the nvidia card, but I still need to get the drivers for the intel card install, how to do it?
View 5 Replies
View Related
Jun 27, 2010
I've installed Ubuntu Netbook 10.04 on my HP DV2000 laptop and now I want to get my wireless to work by installing the proprietary broadcom drivers (4311, I think). But my internet doesn't work yet obviously, so I need to download the drivers to my thumb drive on my desktop and install them on my non-networked laptop.My issue is that I don't know:a) Where to get the driversb) How to install them from a local drive
View 2 Replies
View Related
Feb 14, 2010
I don't use wireless on my desktop so i would like it permanently disabled...each time i boot up it's back and receving up to 80mb of data from an unknown connection via wireless (i dont use wireless) so, to avoid any weird connections to my neighboors house or some kid hacking the neighborhood driving by with a wireless router in his truck i'd like to permanently turn off wireless. this is kind of funny because i had a hard time getting wireless to work on my laptop, but this is my desktop where i do not want it. i looked it up and your forum back in 2007 said to type in iwconfig in the shell then get the nickname of the wireless card then to black list the wireless card. i did this but it didn't work, so what do i do now? i have ubuntu 9.10
View 9 Replies
View Related
Dec 16, 2010
I would like to turn off permanently wifi on my ubuntu 10.10 64bit.
- I know of right click on networking icon, but I need to do it every time system starts. - I also know of "ifconfig wlan0 down" but this again need to be done every time.
What should I do do turn it off permanently (disable) ???
View 9 Replies
View Related
Jan 7, 2010
First off I cant seem to get any drivers installed for my GFX card, I've got an ATI Radeon X1300 and when I go to System > Admin > Hardware drivers it seems to find nothing. I'm pretty sure thats whats causing my next problem; Lag with games. I installed one of my favorite games, Blockland and ran it with Wine, First thing right off the bat is its lagging like hell. But, an even worse problem is happening. It doesn't even seem to start up now...
Alright, now let's go to java. One of my other favorite games, Minecraft, A game made with java, doesn't seem to work. I can play it for about 10 - 20 seconds until the game just turns white. There's also Dwarf Fortress, and it seems that I cant even get the linux version running. I looked at the requirements and got some of them, but not all and when I try to run it nothing even happens.
Lastly, Steam. So far steam is working fine, except when I try and install a game off of it, Steam just immediately closes... So, If you need my specs or anything just ask. I'd relaly like to fix some of these things so I use Ubuntu over windows, because I just love the feel more than windows.
View 9 Replies
View Related
Mar 14, 2010
I'm needing to wipe out my computer, but my only hesitation is that I've made so many awesome changes to my Ubuntu install and I don't want to lose them, since alot of it was copying/pasting terminal commands or following instructions from blogs that I didn't bookmark. Is there any way I'd be able to backup all my preferences, i.e. installed drivers, desktop configuration, basically all the little things?
View 6 Replies
View Related
Sep 9, 2010
I'm installing 10.4 fresh but I can't get the Nvidia drivers installed. I'm using a 9400 GT. Ubuntu installs normally but when I try to enable to the proprietary driver, I get an error on reboot "Failed to initialize NVIDIA graphics device" and have to restart X. Any suggestions on how to get this working?
View 9 Replies
View Related
Jan 2, 2011
so I've installed my two network drivers, Broadcom and Realtek. So now I'm trying to connect to the internet (wlan/wireless) but I am now stumped. What do I do now? How do I get to see available networks and stuff?
View 4 Replies
View Related
Apr 30, 2011
I've just installed the brand new Ubuntu 11.04 and all goes well until...I log in a session. There is a window telling me that my graphic card isn't too good to run Unity, when I have no problem under 10.10 to run all the eye-candy. Now I have a NVIDIA Quadro NVS 120M with 512 megs of memory. I've install the NVIDIA current driver in the Additional Drivers application and reboot. But nothing...in the additional driver app it says that the current driver is installed but not currently in use...what should I do before giving up and install unity-2d?
View 2 Replies
View Related
Jan 22, 2010
how can I change eth1 mac address permanently in an easy way?
View 1 Replies
View Related
Jul 30, 2011
I'm wanting to permanently delete one particular wireless network. I don't want to merely disable auto-connect, I want it to not even show up in my list of available networks. Is there a way to do this? I'd like to still be able to connect other wireless networks. I'm using Ubuntu 11.04.
View 4 Replies
View Related
Jun 15, 2011
I have 2 NICs on my ubuntu server.... eth0 has its IP address....but eth1 doesnt.
How do I assign an IP address to eth1 using only commands on the command line?
And I need it to be permanently...
View 2 Replies
View Related
Feb 20, 2010
I am having some problems with my wireless card. If I ping my pc with no activity on it, it just won't respond to the pings. But if I start pinging from the PC and then from somewhere else, everything works perfect. I found out this problem since my ftp service was not responding sometimes. So looking for info and checking some parameters I found the "Power Management" option in the iwconfig command. It's value is "on" so I tried turning it off and It seemed to have solved the issue. The thing is that after a reboot, it returns to it's default value. Is there any way to make this parameter value permanent?
View 4 Replies
View Related
