I got this working om my laptop but on my desktop this keeps going wrong, its an upgraded system to 10.04. Made a standard pptp connection using network-manager (and the connection is 100% fine, working on laptop and on windoooz machine) This is syslog any ideas, i reinstalled network-manager-pptp and pptp-gnome, but no go no go..
[Code].....
have a problem with my network-manager in ubuntu 10.10.when I dial one of my vpn connections, my other vpn connections be disabled and I can't use them!I tried to restart network-manager and gnome-panel, but it does't seem to solve this problem.
View 1 Replies View RelatedI'm using Kubuntu 9.10, my pppd version is 2.4.5 and pptp is 1.7.2 I'm trying to connect to the iPredator VPN service, but I keep running into problems with LCP. I've tried using knetworkmanager, nm-applet, kvpnc and plain old text-based configuration to no avail. Here's a snippet of pppd's output:
[Code].....
(I've got "defaultroute" in my /etc/ppp/peers/ipred config file.) Any ideas what could be causing this? Could it even be my router? It claims to support PPTP, but considering it claims a lot of other things which aren't true, I wouldn't be surprised if it was the culprit.
Just moved over from the dark side (Vista) and was wondering how I can get two (or more) PPTP VPNs connected at any given time. I usually attempt to multi task (although swambo says I can't) and work on various clients' servers at the same time. The GUI network manager thingy only allows me to dial up one VPN at a time. Is there perhaps a cli version and if so where would I go to get a tutorial on this please. BTW, running F11 32bit. Tried Debian and Ubuntu as well and found F11 to blindingly fast on my DualCore Toshiba laptop. Pity I can't see the additional 1Gb of RAM though. (4Gb in total).
View 2 Replies View RelatedI've created VPN server(PoPToP version 1.3.3) using webmin and all clients are connected successfully. I want to check "current active connections" from CLI(command line interface). what is the command to list all active connections.
View 1 Replies View RelatedI am trying to connect to a PPTP VPN at work, and I cannot accomplish that. Both server and client are using Ubuntu 10.10.
Code:
Jan 7 11:32:26 multicore-dev03 NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
[code]....
i have a VPN server PPTPD on Centos 5.3
eth0: 62.2.2.x (public on the internet)
GW: 62.2.2.1 (cisco router)
i want to configure my ppptp server to allow users access internet with their own public ips of class 62.2.3.0 62.2.4.0 62.2.5.0
every time i configure my server all users can get thier IPs but they only go out with my server IP same as NAT not routing.
can you show me the proper configuration to make my users connect with public IP and have internet access. use specific DNS ( i did this but some users can not brows by DNS)
is there any way to specify an expired date for each pptp user.
I'm trying to connect to a Microsoft ISA PPTP server from my Linux box. The box I'm connecting from is itself a router. I have no problem connecting a Windows XP machine to the VPN via this machine. This is fine, but I would rather connect via the Linux machine, giving me far more advanced routing options (i.e. no to send every packet from the XP box completely unnecessarily via the PPTP tunnel). The Linux router is running Debian Lenny.
I've checked iptables. There were initially some issues. I've fixed those.
Invoking pppd from the console, I can see that authentication succeeds, but then some negotiation goes wrong and the server terminates the connection. Here's the output from pppd, with the more sensitive stuff removed:
Code:
<hostname>:~# pppd call <peer> nodetach debug
using channel 19
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe3e45f75> <pcomp> <accomp>]
code....
Trying to connect to my office as a PPTP client, I have setup my PPTP connection in Ubuntu 10.04, and the connection is active, as I can see from the top bar, and the output of ifconfig:
Code:
eth0 Link encap:Ethernet HWaddr 00:18:8b:b7:a3:ef
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:580 (580.0 B) TX bytes:580 (580.0 B)
ppp0 Link encap:Point-to-Point Protocol
inet addr:192.168.0.166 P-t-P:192.168.0.254 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1
RX packets:9 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:108 (108.0 B) TX bytes:96 (96.0 B)
wlan0 Link encap: Ethernet HWaddr 00:19:d2:7a:96:e5
inet addr:192.168.1.107 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::219:d2ff:fe7a:96e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8525 errors:0 dropped:0 overruns:0 frame:0
TX packets:8496 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5799296 (5.7 MB) TX bytes:1408867 (1.4 MB)
Now I want to access the folder named ABC on the remote PC with IP address of 192.168.0.12, with username USER1 and password PASS1.
I'm trying to connect to [URL] but it will not work no matter what settings. I have ticked MPPE, configured gateway, username, MSCHAP and MSCHAPv2 are ticked, using 128-bit encryption. I have tried to forward port 1723 and 1127 in my router, I have also ticked "enable PPTP PassThrough" in the router. I cannot telnet to vpn.itshidden.com. This is on Ubuntu Lucid. These are my logs from an unsuccessful connection attempt:
[Code]....
I am having trouble connecting back to my vpn at work while I'm at home. Mainly need to get our local svn repos for at home development. I successfully connected to the vpn following this [URL]..I am running Lucid Lynx 64bit and I followed the 9.10 section of the tutorial on setting up PPTP connection.
It worked fine. Then I walked away from my computer and it was disconnected when I came back 2 hours later. I was unable to connect back to it. I used my laptop which is running windows 7 and it connected just fine. So, now I am unable to connect to it and have no idea why. I viewed my system log and don't know what to do with the information. Could someone help me out on this.
Jan 18 18:51:43 david-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Jan 18 18:51:43 david-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 5532
Jan 18 18:51:43 david-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections
[Code]...
10.04 Ubuntu, Have tried every single combination of fields in the Advanced options area when setting up the VPN.
Code:
Apr 25 02:48:10 John NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Apr 25 02:48:10 John NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 12263
Apr 25 02:48:10 John NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections
Apr 25 02:48:10 John NetworkManager: <info> VPN plugin state changed: 1
Apr 25 02:48:10 John NetworkManager: <info> VPN plugin state changed: 3
[Code].......
I just installed ubuntu 9.10 but there isn`t pptp VPN on Network manager. How can I install its packages?? I dont have any internet access on my linux because the only way to connecting to the internet is pptp VPN for me.
View 1 Replies View RelatedI setup a PPTP VPN connection in ubuntu 9.10 (x86_64) using NetworkManager. After enabling the VPN connection, I can browse web pages (it's perfect) but after a while the vpn connection is terminated! The following is my syslog after connecting and terminating:
Code:
Mar 12 22:10:10 amir-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Mar 12 22:10:10 amir-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 2204
[Code]....
Having problems connecting to a work's VPN server.syslog output pasted here:
Code:
Sep 7 22:45:31 localhost NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Sep 7 22:45:31 localhost NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 1771
Sep 7 22:45:31 localhost NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections
[Code]...
I am trying to connect my pptp client Linux to a pptp Linux server using modem but no success. I can only tweak ppp linux side Observing the following log I found it�s due to MPPE Support configuration mismatch in pppd, pppd (linux client) is refusing to accept MPPE encryption.
pppd[24545]: pppd 2.4.5 started by root, uid 0
chat[24547]: abort on (NO CARRIER)
chat[24547]: abort on (NO DIALTONE)
chat[24547]: abort on (ERROR)
chat[24547]: abort on (NO ANSWER)
chat[24547]: abort on (BUSY)
[Code]....
I tried to configure my vpn connection using pptp from the shell following following tutorial: [URL] now, if i use Code: pppd call novax to connect to my vpn i see following appearing in /var/log/messages:
Code:
Feb 10 21:11:57 reg-laptop pppd[2655]: pppd 2.4.5 started by root, uid 0
Feb 10 21:11:57 reg-laptop pppd[2655]: Using interface ppp0
Feb 10 21:11:57 reg-laptop pppd[2655]: Connect: ppp0 <--> /dev/pts/0
Feb 10 21:11:58 reg-laptop pppd[2655]: CHAP authentication succeeded
Feb 10 21:11:59 reg-laptop pppd[2655]: MPPE 128-bit stateless compression enabled
Feb 10 21:12:00 reg-laptop pppd[2655]: local IP address 10.243.249.22
Feb 10 21:12:00 reg-laptop pppd[2655]: remote IP address 10.243.249.20
verifying with ifconfig, my ppp0 ip is correctly set to 10.243.249.22 - i can also ping this ip but i tried to ping other ips in our network and i can't reach any of them - did i mess up the route maybe? Content of my /etc/ppp/ip-up.d/route-traffic:
[Code]...
I am running 64-bit 9.10 on a Acer Aspire 1810T. I can connect to the internet via both wifi and the Novatel U998 modem. I have a PPTP VPN that works correctly via wifi, but does not work via the modem. The obvious problem would be that the ISP is doing something... but I'm dual booting Windows 7, and the ISP's Windows based software is able to connect to the VPN without issue.
I'm running VMWare player to be able to access my required Windows apps, so I'm almost in a position to dump MS if I can get this VPN issue resolved.
Tried to install pptp vpn server via webmin, and I tried connecting remotely from my laptop, but it keeps failing on the verify username and password - I get a error 778 it was not possible to verify the identity of the server. Not sure what could be wrong with the config..
View 1 Replies View RelatedI've configured a pptp VPN using KNetworkManager. It works fine. Now I want to have it started automatically then my network interface is assigned a particular IP from my home DHCP server. I don't need it in other places. I guess there is no such built in functionality, but may be it can be scripted somehow?
View 1 Replies View RelatedI'm trying to configure internet access using KDE network manager. Added new VPN connection, set gateway and other options but connection breaks. Here is /var/log/daemon.log
Code:
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 1761
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections .....
log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request'
Jul 1 17:36:02 dvinokurov-desktop pptp[1773]: nm-pptp-service-1761 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state)
As I understand the main problem is in "(IP Config Get) timeout exceeded".
I'm trying to establish a connection to my ISP which uses PPTP protocol and a VPN server. The deivce I got from my ISP is a modem, not a router. The problem is my computer is unable to communicate with the ISP VPN server.
P.S Here are the instructions for Windows XP which work: http://portal.bnet.hr/ZG/windows-xp.htm
Here's what I have done so far code...
i set a pptp -vpn connection.but i cant post anything in facebook. is there any specific settings i have to do?
View 1 Replies View RelatedI am using relakks.com VPN Service and set it up with gnome's default nm-manager interface. Everything is just perfect when I'm browsing the web. I can do it for hours and nothing happens. On the other hand, when I open up a torrent client - after 15 seconds to 2 minutes - I get a nice kick off the VPN.
It goes like this:
Code:
Sep 20 08:25:11 NPC pptp[3496]: nm-pptp-service-3490 warn[decaps_gre:pptp_gre.c:426]: discarding bogus packet 94236 (expecting 93663)
Sep 20 08:25:11 NPC pptp[3496]: nm-pptp-service-3490 warn[decaps_gre:pptp_gre.c:426]: discarding bogus packet 94237 (expecting 93663)
[Code].....
I managed to set up a PPTP VPN connection in Ubuntu 10.04, and it worked first time.This was about 3 months ago. It was working yesterday (Oct 05 2010), but when I came to log in to the VPN today it doesn't work. I tried the same VPN connection on my wife's laptop which runs Vista and it works. I have tried re-entering the details, even deleting and setting up from scratch via network manager. And yes I have the correct VPN plugins. what I should do. Is there a log file so I can have a look at it to see what the problem is. If there is where is it located. The computer is able to connect to the internet without any problems, just can't connect to the VPN. The only thing I can think of is that the update manager popped up this morning so a few things have got updated today. maybe something in there broke the VPN connection.
View 4 Replies View RelatedI'm trying to setup IPv6 in a PPTP client configuration on Maverick, but in network manager only IPv4 is available.
On LAN and WLAN IPv6 is working fine but I want to avoid when using a VPN all IPv6 connection are bypassing the VPN which compromises the VPN to a certain extent ..
I use a PPTP VPN for privacy and bittorrent. I have been over all very happy, only taking about a 1/4 hit to my over all network speed. However, I recently downgraded my VPN package, and the new sever I connect through is sometimes unstable with a high throughput. Because of this I am trying to find a way to block ALL (HTTP, bittorrent, email, etc) outgoing network traffic when the VPN fails, and then resume the traffic when the VPN reconnects. Essentially forcing all data through the VPN, and creating the illusion of simply having no network connection to the outside world at all when the VPN is offline/re-connecting. This is opposed to the current situation when the VPN will fail, all my traffic will switch to direct (visible) access through my ISP, and the VPN will re-establish sometime later (2-3mins, normally. Unless I manually restart it sooner).
I have tried Google, but have only been finding information on configuring local web access outside of the VPN for the sake of speed. Information of which I cannot seem to find a way to apply to this.
I've setup a PPTP server on my ubuntu 11.04. PPTP settings seem to be OK and I can connect to my machine from a Windows PPTP client. But then I dont have access to Internet from my Windows machine. Authentication is successful and I can see GRE traffic to my PPTP interface on my Ubuntu, but I can't reach any host (including Internet) after my Ubuntu machine. I suspect this is a routing or NATing issue.
View 1 Replies View RelatedRunning Ubuntu 11.04 Server 32bit fresh install
I did this walk-through trying both iptables and ufw
I am able to connect to my VPN server using both windows 7 and Ubuntu desktop just fine, and using wireshark verify that all packets are being compressed and sent through the VPN tunnel.
Many sites work but there are several that will not load while using the VPN, one of them is ubuntu forums also sourceforge.
I can ping the servers while connected but the websites just will not load, and time out. The second I disconnect from the VPN they load instantly.
I have been wanting to switch from my routers VPN to my headless linux box VPN. I have everything setup in the PPTP and then forwarded the ports to it. Heres the kicker. My APPLE Iphone connects to the VPN without a problem at all. Views Intranet pages etc.
My Windoz XP is kicking and screaming and one error after another. This is my setup on XP: I entered Ip Entered exact same credentials as used for connecting with my iphone turned off "use gateway on remote network" Changed type to PPTP VPN connecting my xp machine to this PPTP server on linux?