The KNetwork Manager when trying to connect to my network gets stuck on "Configure interface".
Statistics:
Type of Wireless Card: D-Link Wireless N USB Adapter DWA-130
Network Settings:
SSID: Irrelevant
Security: WEP
IP Address: Automatic
Driver: Ndiswrapper/DWA-130
Any reasons why this may be happening?
I am totally new to Linux and have just installed ubuntu 10.10. After configuring the network interface via dhcp I started getting these messages that come in so frequently I can't configure anything else.
[87.186415] Stack:
Why I am getting this messages and more importantly how do I get rid of them.
The installation is on a VM on Hyper-V.
Network manager doesn't recognize nas0 interface and i have problems with using Gwibber, Evolution mail,Empathy, etc Is there any way to add nas0 in Network manager?? I know the solution to remove Network manager, but i need Network manager because i'm often using wireless (as second internet connection).
View 1 Replies View RelatedWhen I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.
I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.
Config: Squeeze, 2.6.32-5-amd64I just installed squeeze and the network is up and nm-manager deamon if working but the Gnome applet doesn't seem to work as usual. It indicates no network although the network is available as indicated by ifconfig and route below. When I switch WiFi on, the nm works flawlessly. When I click on the applet icon it says "Wired Network: device not supported" (or similar, msg in french is
eth0 Link encap:Ethernet HWaddr 00:1f:e2:12:ea:d8
inet adr:192.168.0.182 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::21f:e2ff:fe12:ead8/64 Scope:Lien
[code]...
I have a ppp0 entry with post-up options like this
mapping ppp0
map none photon-plus motorola
map timeout: 12
[code]...
Just curious, because it seems my wireless connection works regardless of whether or not the MAC address is listed there. I'm just curious why that option is there to add it if it works regardless.
View 2 Replies View RelatedI used the network manager to configure my eth0 interface.It is working fine. I have found the nameserver entries in /etc/resolv.conf files. But the /etc/network/interfaces file does not carry the ip, netmask, gateway,network and broadcast entries. It only has a entry for the lo interface. where are the settings for eth0 as done by the network manager, stored in case of ubuntu?
View 7 Replies View RelatedAfter an online upgrade from f11 to f13, on rebooting the setup attempts to configure the wireless connection and fails with a not very illuminating "error configuring your network interface" notice, offering no option but to go back and try again, which of course fails again with the same error.
Wireless card is a D-link that works fine with the ath5k driver in f11.
how I can get out of this vicious cycle and proceed with booting the upgrade?
today I tried to configure a network route to a host for testing my network interface. Code: route add 192.168.1.15 eth0 As I have to eth interfaces and both interface got their IP from DHCP (192.168.1.11 and 192.168.1.12) and are in the same subnet, I shut the other interface down:
Code: ifconfig eth1 down Then I tried to test the interface by doing a ping to 192.168.1.15.
Problem: When I unplug the cable from eth0 (and eth1 is still plugged) the ping still works. Somehow my linux (it's debian) powers up again eth0 and pings over this port.
How can I stop my linux doing this. I just want to have the route added only on the one interface - not the other. Is it maybe some case of a default-gateway?
entries for connecting to broadband. Was OK with ubuntu 8.04 which had boxes for DNS server, etc. The 10.04 asks for MAC address (?) and there is a space for "DHCP client ID". I don't understand these terms. how I may proceed, especially exact syntax for any command line work. I am in Chennai/Madras, and have a BSNL wired broadband connection to my Dell laptop.
View 5 Replies View Related"Need help with entries for connecting to broadband. Was OK with ubuntu 8.04 which had boxes for DNS server, etc. The 10.04 asks for MAC address (?) and there is a space for "DHCP client ID". I don't understand these terms. I will appreciate some step-by-step instruction or example of how I may proceed, especially exact syntax for any command line work. I am in Chennai/Madras, and have a BSNL wired broadband connection to my Dell laptop." I have repeated what I tried in the ubuntu forum without success. I'm really in newbie category, and not comfortable with computer or internet jargon. I can still connect with ubuntu 8.04 and firefox, just once daily. In a later post I also added: In Ubuntu 8.04 there was a system> admin> network tab (missing in 10.04). In the connections tab "wired" was checked. The general tab had my computer name (tsq-laptop) for host, and a blank box for domain name. The DNS tab had 192.168.1.1 in the servers box (presumably my service provider BSNL), and nothing in search domains. The hosts tab had a list of IP addresses and aliases, the first few being:
127.0.0.1 - local host
127.0.1.1 - tsq-laptop
::1 - ip6 local host ip6 loopback
fe00:: - ip6 localnet, .... (and a few more such I think most (or all) of these entries were generated automatically by the system, since I don't understand the jargon at all! I don't recall having any difficulties then, some two years back.Before that I had major problems in using the internal modem for a dial-up connection, but got detailed help by e-mail/internet from some really knowledgeable people in Europe and elsewhere regarding linmodem configuration, which I followed blindly and it worked!
In 10.04 there is only the taskbar icon to edit settings, and it has a different structure. It asks for MAC address (example 00.11.22.33.44.55). Other info required is IPv4 settings, DHCP client ID, about routers and other stuff. There may be other system settings to be made, which I can try with proper guidance. The ubuntu help page gives very sketchy information, and the images are not clear at all. No response to that till second day. Subsequently: In the 'wired' tab the 'routes' button popped a table where I entered address as 127.0.0.1, and netmask as 255.0.0.0, leaving gateway and metric blank. This is all geek stuff for me - I'm an old-fashioned engineer from the slide-rule era!
Should all this have been in the newbie forum? Thanks, =TeeSquare=
My DNS server is baring 192 series IP for ex: 192.168.10.100, need to configureloadbalancer IP in that DNS server, where loadbalancer is baring 172 series IP. for ex : 172.56.67.19.is it possible to cofigure the loadbalancer ip in DNS server? if it is, please let me know the configuration details and procedure.
View 2 Replies View Related1. My machine [running Karmic Koala] is part of a corporate LAN with NIC details below
Quote:
2. My routing table:
Quote:
3. The network printer's details [as read from the printer's display interface]:
Quote:
My question:
This printer can be discovered by windoze machines using "Find printers" and then added. [Am not sure how this works!]
But when I try to discover the same from my ubuntu machine, its not getting discovered. Tried pinging the ip [172.20.254.158] which gives the following:
Quote:
Now I tried fiddling around with the route command along with good amount of googling but to no avail.
1. Is there a way I could add that printer to my machine?
2. If yes, how could I? Does it involve adding routes?
Does anyone havea good tutorial on Fedora's network scripts, how to edit them, in what order they are called, etc. What I want to do seems simple, but something in the bootup keeps changing it. Right now, I have an image of Fedora Core 7 created in a server with 2 Ethernet cards. I need to specify static IP addresses for each card. Thats simple, and I did that. Now, heres the tricky part, I need to be able to clone this image and place it onto other exact duplicates of the hardware, and have all of the settings stay the same.
What happens here, is that eth0 and eth1 are stored somewhere as devices, and upon boot on a different machine, the Fedora will mount new network cards(different MAC addresses) as eth1 and eth2. It then mvoes my ifcfg-eth0/1 to a backup, and creates two brand new network setting's files, which initialize to DHCP. This creates an issue, becuase these machines do not have monitors nor keyboards attached, nor is their a DHCP server, so its a pain when I swap the machine out, to have to go in with a keyboard/mouse/monitor and reconfigure the network settings before I can connect to it over the LAN.
So does anyone have any advice on how to do this? No matter what i tried, booting the image in a new PC caused Fedora to create two new devices and create brand new network settigns for them, both initialized to DHCP. Hell, I wouldn't care if it created brand new devices, if it would initialize them to static IP addresses that I am expecting.
First off I would like to install a GUI for samba. After that I want to set up my network so that router stays as the server for the network I have four windows computers already hanging off of the router. This machine which has Slackware on it is hardwired, directly connected, to the router via cat-5 cables. I have samba installed already and I just need to configure it correctly.
View 4 Replies View RelatedFor some simulation, I am trying to configure a setup of 3 ubuntu desktops (one of them with multiple network cards) to behave in the following way:
Each one of them should be a separate network not seeing the others (including multicast addresses) They need to have internet access through the machine with multiple network cards. So from the point of view of each machine they define a LAN in which it is the only device and have internet access through the gateway machine.
What do I need to do to configure these machines for the above setup?
I recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies View RelatedI'm having all sorts of problems connecting an access point to my computer, but here is one piece that I hope will get me going, if I can get it solved.My computer has two network interfaces, eth0 and eth1. eth1 connects to the cable modem and thence the world, and works fine. eth0 is supposed to connect to the access point over a private network. Here is the output from route with my IP address blotted out:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
[code]...
If I have set up 2 network interfaces on a box, if I started sending multicast traffic, it will go out through both interfaces? Or is there a way to control through which interface it will go out?
View 1 Replies View RelatedShowing my ignorance, but why would this work
address 172.16.1.8
netmask 255.255.254.0
network 172.16.1.0
broadcast 172.16.2.255
[Code]....
Notice the 2 in address. Seems to me it doesn't like the network and wants it to be 172.16.0.0, but I am adding to a network already configured this way.
I am trying to get my ethernet adapter list to make some sense. This is what ifconfig spits out
Code:
agarzon@euler:~$ ifconfig
eth3 Link encap:Ethernet HWaddr b8:ac:6f:3b:f4:4f
[code]....
Is there any way in a machine with 2 (or more) network devices to only allow 1 program to use interface1 and force all other programs to use the other?
View 4 Replies View RelatedI have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
View 4 Replies View RelatedI recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
My old /etc/network/interfaces isn't working in 9.10. I've used it from 8.04 to 9.04 without issues.
I need to make multiple configuration per interface:
Code:
auto lo
iface lo inet loopback
auto lo:1
[Code].....
If not how can I downgrade the program responsible for reading this file?
running 9.10 server, have SSH access through LAN, but I'd like to move box out of my neighbor's (shared internet & the router's in his place) and into my own space. Would have done so already, but I can't get the wireless working. Details below:lshw -C network gives:
Code:
*-network:0 DISABLED
description: Wireless interface
[code]....
How can I force a Wine application (or Wine itself) to use a specific network interface? I have installed hamachi and am trying to play starcraft over virtual LAN. However, when I run Starcraft with hamachi running, it does not work. I have now determined that hamachi creates a network interface called "ham0". How do I force Wine/Starcraft to use the "ham0" network connection? I have looked into forcebindip but it crashes on wine.
View 1 Replies View Related
