I wish to promote a "normal" installation of Suse as a domain controller with LDAP so the other computers in my network need to use a centralised username and password to log onto the machines.The only documentation I can find refers back to suse 9.
View 2 RepliesI need to set up a domain controller that can communicate with windows machines as well as be accessable by the domain name and allow me to log in to the domain from my windows machines. i do have the novells guide to compTIA linux+ book but i cant figure out what i need to do to set up this server in the way i described above.
View 4 Replies View RelatedI was wondering if there is any way to enable an MS Windows client that is otherwise unable of joining a domain to join a domain controlled by (open)SUSE? Is that inability only for joining a Windows based domain but a client that runs XP Home Edition or similar domain- incapable version of Windows could join a domain if it was controlled by Linux?Pardon my newbie style, but answer doesn't have to be detailed step-by-step, just yes/no answer with some pointers would do. I am not new to linux but new to network services... search engines weren't friendly when asked this question at the search bar...
View 2 Replies View RelatedI have the following problem: I can't authorize with my central WinNT 4.0 domain controller. I set up all parameters in YaST, but still can't see any shares or get inet access.I am using gnome and it shows several windows workgroups. While I am trying to open it, gnome shows a window to request my login credentials. I am setting up all thing right and then it shows it again. I tried smbclient utility to login, but still can't login.What can I do about it?Also I have some problems with my http proxy: suse doesn't sent it my login/password while I can easily work with proxy, that doesn't request it
View 1 Replies View RelatedIm an IT manager for a small company with a small ammount of users. We already use linux for our data server and I would like to implement a domain controller. All of our user machines are WIndows XP pro.
Ive been reading up on using OpenLDAP as an alternative to active directory.
What I want is just a simple active directory like server, with a GUI if possible.
What do I need to look at and how would I go about setting this up? Im fairly proficient with Ubuntu already, I just need to be pointed in the right direction.
Is it even possible to have my windows users be able to log in to their machines using an ubuntu domain controller?
At the school i work in i have a server2k3 server that provides a domain to all the windows clients, aswell as a fedora server that acts as an imaging machine and webserver.
Im rather concious of the fact that if for any reason the Server2k3 server was to die there is no backup of active directory, or anything that can take its place whilst a replacement is found.
So is it possible to use a fedora machine with samba as a secondary domain controller? so it can be used as a login server, and has a copy of AD.
At home I am using a Windows Server 2003 as Domain controller with Active Directory. My "client" computers are all currently running Windows XP. They all require CONTROL-ALT-DELETE and the user to enter their credentials before they will allow logon. Shared files reside on various other Server 2003 machines and have restrictions on so only specific users can access certain resources.
For example, I have the family finances and other important documents in a share named 'Private-Files', only members of the 'PrivateFiles' global group have access. Likewise, I have my movies sorted into their appropriate age categories - after all, I don't want my 5 year old son accidentally watching Aliens! So this all works but as you can imagine, the copies of Windows XP and Server 2003 are far from legitimate. I want to go legal and the only real way I can afford to do this is to switch over to Linux.
I have used Suse, Ubuntu, Fedora and a few other distros in the past and found that for ease of use, I want to use Ubuntu on the desktop computers but power the servers with Open Suse. The problem is, although I can install the OSes, I have no idea where to proceed from there - for example, how do I create a Domain in Suse? Where and how do I create domain users and groups? How do I set permissions on shares for the domain users?
I am looking for a way to deploy Linux in the same manner as a MS network. I want my desktop clients to authenticate against a DC, but Im not sure what would take the place of a Domain Controller in Linux. In addition, I am not sure if I could be able to manage user rights via a central server.
I have read about Samba as a domain controller, but Im not sure if that is what I want. In addition, I have read about LDAP, but again Im not sure if that is what I need to use. When I researched RADIUS servers, I was even more confused.
I am installing SUSE 11.2, and went with the default options, now it reached the point of "Windows Domain Membership". At job I do not remember the right names, so I tried some but I get an error message which says "cannot use the group "WORKGROUP" for Linux authentication", etc.So I would like to avoid windows authentication, but at this point I do not see this option. I can only try domain names or abort the installation. What could I do here in order to finish the installation without windows memebership?
View 2 Replies View RelatedI want to give Administrator privileges to Root user in Linux Domain Controller
View 12 Replies View RelatedI'm working for a smallish non-profit that has gone through some recent growing pains. We have two sites that are currently without a domain controller, and no money for MS licenses, so I was thinking of trying to add a couple of additional Linux machines (we already run Linux for web services internally, and I've set up a test case previously to see if I could get a server to join the domain, which was a success) and was trying to find out if I can get them to act as Domain Controllers without replacing the domain. The main issue that I'm having at those locations is drive mappings are not happening correctly against our DFS file servers. The one other location that had this issue had it go away when we added a local DC. The domain is a Server 2008 domain.
View 2 Replies View Relatedwe have a weird problem with our opensuse 11.2 server installation.
We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.
This indeed already worked weeks ago until....this week.
Maybe some updates??!
I do not know what happend exactly. The server just does not want to start again and throws following error:
Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed
This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.
So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.
I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).
I installed windows 7 and recover grub from the karmic livecd successfully. Now I can access all the OS in my machine. The only weird issue that I have is that there's no login promote in tty1-6 any more. When I switch to tty1-6, I can only see a flashing underline promote. But I can input anything in tty1-6. How to get tty1-6 back?
View 4 Replies View RelatedI have up to 300 PC in Ministry of Higher Education, I want to use UBUNUT server and UBUNUT Desktop for my network, But I am really not so familiar with UBUNUT Server just a little bit, finally here is my questions: Can I do these roles 1- Domain Controller. 2- User Accounts. 3- File Sharing. 4- Web Server. 5- Print Server. 6- Internet Sharing. 7- Web Chaching. 8- web proxy. 9- Firewall.
View 2 Replies View RelatedHow to configure centos 5.4 as a domain controller?
View 2 Replies View RelatedIn short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'
Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.
Can Debian act as a Windows Domain Controller? I'm just curious because my boss recently tossed out some old servers and I grabbed them. They're good machines but I can't afford to pay $1000 for Server 2003 R2 just to setup a domain at my place and run Endpoint Protection and such. I've never used a domain setup in Linux before so I thought I'd ask and possibly try to, if Debian/Linux is capable of such a thing.
View 6 Replies View RelatedI joined my Ubuntu 1004 LST to Windows 2003 AD.
it always frozen my ssh login window when the DC crashes. when the DC crashes, the putty won't give me the password prompt and will go inactive directly after a while no matter what username(local or domain users) I give
is it possible to avoid to check domain users before it gives me the password prompt? or, we can make it to check if the user is a local user first?
i have configured samba as file server in fedora 11,it works fine for both windows and linux machines .but i want to configure ldap and samba as domain controller. Googled a lot on internet every thing is confusing me .
View 2 Replies View RelatedMy Windows 2003 domain has three domain controllers. All of them are configured as global catalog servers, but my krb.conf and krb5.conf only contain a reference to one of them. What if the DC referenced is down? Should my files reference the other DCs? The contents of my files follow...
krb.conf
--------
MYDOMAIN.COM dc01.MYDOMAIN.COM:88
MYDOMAIN.COM dc01.MYDOMAIN.COM:749 admin server[code]...........
I have setup Ubuntu servers as LAMP machines but that's pretty much it.
I need to work on an existing CentOS server that I will see for the first time tomorrow. I am told that, as of right now, it is "just serving the internet." The goal is to set it up to be a primary domain controller by which I mean:
1) A user should be able to login to the server from any of the workstations and then see their server stored documents
2) The clients will be a mixed bag of Linux, Windows and Mac machines
I could use a push in the right direction as to what I need to do to get this all setup. I know how to setup users and home folders (I use webmin typically and I understand that there is a version for CentOS) but clearly there is more that I need to do. I am really curious as to how I would map the necessary drives on the client machines upon login and have the users have automatic access to their data regardless of the client machine they log in to.
Q: How can I allow my users to mount a cifs share without an entry in fstab in OpenSuse 11.4?
I have an answer myself. Until OpenSuse 11.2 I could mount my samba shares by making mount.cifs and umount.cifs setuid root. Today I installed OpenSuse 11.4. Unfortunately mount.cifs isn't anymore allowed to be setuid due to security concerns. Security is not an issue in my case, so I copied the mount.cifs and umount.cifs from 11.2 to make it work again:
1. Download cifs-mount-3.4.2-1.1.3.1.x86_64.rpm from this repository (I use 64 bit):
"http://download.opensuse.org/distribution/11.2/repo/oss/suse/x86_64/"
2. Extract the files mount.cifs and umount.cifs from the rpm and copy them to /sbin
3. Make them setuid root:
Code:
linux-y5qw:~ # chmod u+s /sbin/mount.cifs
linux-y5qw:~ # chmod u+s /sbin/umount.cifs
4. Mount your cifs shares as a normal user:
Code:
martin@linux-y5qw:~> /sbin/mount.cifs //192.168.2.2/data /home/martin/data/ -ousername=martin
Password:
Anyone had any issues with connection to LDAP server from evolution as a normal user, but if evolution is started as sudo/root it works fine. This is on 10.10
View 1 Replies View RelatedWe have a LAN with mixed Windows workstations win 2000, winxp, vista, win 7, linux servers all in a workgroup. Most applications used on the LAN are windows based, with a growing number of python apps. A friend suggested a Primary Domain Controller would be a better way to manage logins, resources etc. I don't wont to use a Windows based PDC, what would you suggest as a linux based PDC? I have heard about TURNKEY PDC, but it uses Samba 3 and apparently doesn't handle Active Directory in Windows.
View 5 Replies View RelatedI had tried to build up my linux box as Domain Controller and DNS for serving clients of windows xp. But it didn't succeded. Its always giving error of DNS SRV record. I already created SRV records and the service is also started. Please Send me the complete configuration of LDAP CUM DNS on rhel5.
View 4 Replies View Relatedhow to add user to my opensuse 11.3 box from a ldap server ? I used useradd but can't log in with the ldap credentials .
View 1 Replies View RelatedI have created a CA on my server then created a server certificate under that then exported it as a common server certificate.I have then gone to my LDAP server and enabled TLS and told it to use the common server certificate.Now on my client I have enabled LDAP TLS/SSL and it's asking me to download a certificate ... from where ? Do I export the certificate to a file and put it on a web server.If so what format as the export offers loads.
View 1 Replies View RelatedFirst of all I am new user on fedora forum and I love Linux (special Redhat flavours) and want to replace windows into Linux Everywhere. I am having some issue in configuring PDC on Fedora,I want to replace my company Windows Domain controller and file server into fedora file and PDC, I tried from web and through 389-directory server but didn't succeed even once, how to configure PDC with Samba 4 + 389-directory Server, I have heard samba 4 is having awesome support and its better then windows DC, configuring Complete PDC. (Whatever need to configure PDC i.e. DNS, SAMBA 4, SWAT, WEBMIN, 389-Directory Server, Windows sync,).
View 4 Replies View RelatedI want to Migrate Win2003 Domain Controller to Samba with All Settings Current Setup: Working Win2003 Domain Controller (DC)with home directories, group policies, shared printer, disk quotas. how to migrate all these settings to Samba Domain Controller. I have tried to search but didn't get detailed information.
View 14 Replies View RelatedIm running a Samba server as a PDC
Every thing works fine When I log in it creates a folder on the server for the user. when the user logs out, it is copying the user data to the server, for example folders like Documents,Favorites and so on.
My problem is,Im using a Dutch version of Windows 7 but the folders sync are English