10.04. Updated frequently (nothing unsupported but official). Last time NM couldn't connect to internet. It was just animating for 20-30 sec. and stopped after. Modem is detected (as always). The only way I am able to get connection is wvdial. Which I'm using now.
View 1 Replies
What include support a driver for USB modem Huawei E219 (HSDPA/UMTS) and Huawei EC226 (3G/EVDO)?
View 1 Replies View RelatedI connect Huawei USB mobile connect to my laptop with ubuntu 10.4 64bit but I cant connect to it when I try to add Mobile Broadband connection .
I see it in lsusb
Code:
lsusb
Bus 002 Device 003: ID 12d1:1446 Huawei Technologies Co., Ltd.
but when I dont know what will i do to enable it and connect with it
I was able to use it normal with my old laptop and ubuntu 9.4 & 9.10 32bit
but with my new laptop I cant use Ubuntu 9.10 with it so that I used 10.4 beta version .
I am having desperate problems trying to connect to the net with a Huawei E173 USB modem. I was using Linux Mint 7 which I upgraded to version 9 today to see if that would fix the problem but it made no difference. Basically it seems the only time I can connect to the net in linux is if I use the modem in windows and then restart straight into linux, in that case it sometimes gets recognised and works. So at least I know it can work.
I've been trying loads of stuff like usb_modeswitch I found on the net but none of it has worked. Here is what ls-usb gives me -
[Code]....
I am unable to get any work done without the net and I will not have access to a wired connection til the new year.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
Some month ago i bought a UMTS / HSDPA Stick "HUAWEI Mobile Connect E160". I worried about getting it running with Ubuntu, but it was freaking easy to get it running. Even less complicated than installing the same device with windows.
It worked some month without any problem and then suddenly, didnt work any more. If i plug the device to my laptop (lenovo x61) unter linux now, i still can click to start the mobile broadband, it trys to connect some time, but shows "disonnected" at the end (dont know the exact message in englisch, because i use german language prompts). The same device still works fine with same hardware with windows vista at all 3 usb ports. I deleted the mobile broadband settings couples of times and made a new one, without any effect to the behavior.
I am trying to connect my huawei e160 usb modem but it keeps failing and does not show on the Network Manager, checking on /var/log/messages this it what I get:
Oct 5 15:31:30 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:30 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
Oct 5 15:31:33 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:33 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
Oct 5 15:31:36 LPKENBITD002 modem-manager: (ttyUSB1): re-checking support...
Oct 5 15:31:36 LPKENBITD002 modem-manager: (Huawei): (ttyUSB1) deferring support check
I tried to connect to the huawei cdma EC325 modem. using the network manager applet. System asked which tpe of connection i selected cdma and gave the username and password for the account and the password for my opensuse account.Still i cannot connect to the internet using huawei ec325 modem.How to rectify the problem What shall i do next.
View 2 Replies View RelatedDoes anyone know how to connect to Huawei E122 Mobile dongle? I used to connect to E169 usb stick via umtston.
View 3 Replies View RelatedI can not get NetworkManager to handle my Huawei E220 usb modem. I have searched forums and tried a lot of things. I have just upgraded from openSUSE 11.2 to openSUSE 11.3 using zypper. It seems to work fine except that umtsmon stopped to work, so for now my laptop has no connetion to internet at all. Here are some information about my settings:
I have used usb_modeswitch to make the device a modem. Am I right if I say that usb_modeswitch is a one time command, or does it swap the setting each time it is called? Anyhow lsusb states that the device is a modem. (All the time.) code...
i tried to connect whit this key on opensuse 11.3 but i can't the device is recognized i start to connect it and the system show me "activating" but the light never comes blue , it's always green and it's impossible go to internet i use kde..
View 1 Replies View RelatedI am trying to use the HUAWEI E1756C USB stick to connect to the internet. Installing usb_modeswitch and usb_modeswitch-data allowed networkmanager to "recognize" the stick and set up a mobile broadband connection.
The result is that NM succeeded in connecting (one of every five attempts) but firefox does not surf, nor emails can be downloaded etc. Just like if not being connected. The USB modem shows the steady blue LED as connected.
A NM issue? I have tried disabling NM control and tried with PPP clients like NMTSMON, wvdial and even Sakis3g. All with the same results. They seem to connect and show flux up and downloaded but no surfing.
resolf.conf shows is pretty much empty and no DNS there.
The working settings in Window$ are:
Same settings with Sakis3G, or NMTSMON or NM result in connection with no action from applications that use the internet.
I have had a similar issue with WLAN each time I change to a different network. I solve that by forcing to update the DHCP. I mean using -su dhcpd wlan0
But attempts like dhcpcd ttyUSB0 or dhcpcd ttyS0 get the same result. So no idea if this is an DHCP, or DNS or another issue.
My box is an ASUS EEEPC 2005H netbook with OpenSuSE 11.2 and KDE
I have a "Huawei EchoLife HG520s" with witch i connect to the net in windows but i can't seem to manage to make a connection through ubuntu, nor can i find a helpful tutorial.
View 2 Replies View RelatedI moved from Debian to Ubuntu a few months ago, with everything working fine, except my 3G modem (which worked with wvdial and umtsmon in Debian).
The packaging claims that it is a Huawei E160, but lsusb says different: E220 (12d1:1003).
I've followed various instructions from these forums and the wiki, and it seems to be being recognised as a modem (I can set up an O2 prepaid (UK) connection), but it refuses to connect.
ubuntu I can not use a wireless modem huawei 160.type can only be used in windows.well to be used in my ubuntu linux? whether there is a script that used.
View 2 Replies View RelatedI've used Ubuntu for almost 3 years now and now I'm forced back in the arms of windows. Unfortunantly the only internet connection thats available here is a 3G modem connection. When I bought the connection a Huawei E122 modem was delivered to me.
When I plug it in it recognizes the modem as it should and it even lets me set it up. But then when I connect, it fails.I have googled around for a couple of days and I've come up empty handed.I really want ubuntu back, and still be able to use the internet.I have a Asus EEE 1008ha laptop and use ubuntu 9.10
just install my HP notebook with Ubuntu 9.10. My problem is my ubuntu can't detect my Maxis Huawei E1762 (its not E220 - sorry) usb modem.
View 4 Replies View RelatedI recently bought a Huawei EC1261 mobile broadband dongle from Tata Teleservices. Unfortunately,neither does the dongle does not work in Ubuntu 9.04(Jaunty Jackalope) nor in Windows XP. The dongle is rather mounted as a drive and not recognised by NetworkManager as a mobile broadband device. The drive can be accessed with Nautilus as well as terminal like any other USB pen drive and located at "/media/disk". Also, does the device work in Ubuntu 10.04(Lucid Lynx)? report if anyone has tried using the device on Lucid, as I will upgrade to Lucid if the device is supported.
View 9 Replies View RelatedAs the title says, the operating system is unable to detect the usb modem Huawei EC 1262. It is annoying since i dont have any alternate connection to troubleshoot. I can't download any software through ubuntu software center. I am using ubuntu since 2005 but mostly i used dsl. this thing is new to me. since i moved from my previous place so had to buy wireless connection.
View 2 Replies View RelatedI currently use Ubuntu 9.04. I have thought of upgrading to 10.04 for a long time, but I am unable to do so as I do not know if my mobile broadband device, Huawei EC1260, works out of the box in 10.04. In the Ubuntu wiki, I found that it was not compatible with 9.10 and a bug report had been already filed. A line is mentioned in the page, which tells us:
Declined for Lucid by Jeremy Foshee
So, does this mean that the problem is fixed in 10.04? Or, if it is incompatible, then, how will I configure it so that it can work? Now, many people may be considering that I might just download the CD image and try it out. Although my company has given me the device with 5 GB of free usage, but I have to show reasons for any file downloaded more than 15 MB.
Apparently it works with >Ubuntu 9.04, but I need 8.04..I'd had an older modem working on the same system, so its really something to do with this newer ones.
Symptoms:
lsusb shows little, no /dev/ttyUSB* devices
lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
[code]....
I just recently switched from Ubuntu 9.04 to Ubuntu 10.04.1. Like Ubuntu 9.10, Networkmanager will not recognise the Huawei EC1260 until I do all this in a terminal:Code:udo rmmod usb-storagesudo modprobe usbserial vendor=0x12d1 product=0x140bHowever, if I have plugged in a pen drive earlier, then the above methods fail, too.This is a continuation of the problem that first appeared in 9.10 which has not been fixed yet (and reportedly fixed in 10.04).
View 3 Replies View Relatedi'm having problems trying to get ubuntu to recognise my usb modem because its one of those "flip-flop"/"zero-cd" devices.okay so this is what is inside the usb-modeswitch.conf file
Code:
########################################################
# Huawei E169
[code]....
Have a huawei model e122 and workd fine on Win7 but I have a dual boot with a seperate hard drive for linux.....its were all my online banking etc is done and was wondering does anyone know how to set it up on linux ?
with windows you just plug it in and the program and drivers automatically load, the usb modem has a sim card from my wireless provider that has all my details on it so I didnt need to enter a password or any thing
I need driver for my Huawei e5 modem. connection by wi fi is ok but i need to read messages from the SIM card, inserting to phone isn't possible because if i put it back into modem i will be asked for PIN code that is typed by the computer.
View 2 Replies View RelatedI am new to Linux. I have recently installed the Ubuntu 11.4 LTS Distro that comes with the Haynes Linux Manual (which I heartily recommend to new users). For the Internet I have a Huawei E1550 dongle on the 3 network in the UK which I'm currently using with Windows XP on my desktop to post this thread. After some initial fumbling, I'm unable to use the dongle with Ubuntu.
View 8 Replies View RelatedI have upgraded my Acer Aspire One from 10.10 to 11.4. My T-Mobile UK Broadband Dongle worked fine until then, and now it won't work. It starts flashing green (as it did before) and then it flashes blue. I can see a Mobile Broadband option in Network Manager (including the settings that worked in 10.10). However, a right click on the network icon in the top panel does NOT give me any corresponding (T-Mobile) connect option, nor is there anywhere in there with a check against Mobile Broadband as there was in 10.10
View 1 Replies View RelatedThis is really weird, and I would like just this question answered: I've spent like 2 hours by plugging, unplugging, rebooting, and doing everything I could, but the modem wasn't working. When I did ls /dev/ttyU* it was showing up a list of 6 usb devices.
Code:
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2
/dev/ttyUSB3 /dev/ttyUSB4 /dev/ttyUSB5
And when I sent the command wvdialconf after looking into all the devices, it didn't recognize any modem.
The thing is, that by the time I was writing here for a solution, I disconnected the modem, and when I reconnected it I did a ls /dev/ttyU* just to copypaste the info, and Voil! there were just 2 devices, and wvdialconf worked out just fine! I would like to know what I was doing wrong, so I make sure it won't happen again.
Oh, and I forgot to say: I use Ubuntu 8.04
how configure E1550 Huawei modem in Ubuntu9.10.
View 1 Replies View RelatedI recently received my Ubuntu 9.10 CD, Kubuntu 9.10CD and Server Edition. I was recommended to do so by a friend because my computer Running on Windows Vista Home Basic with 512MB RAM has been extremely, unbearably slow for the last month or so I got the CD's yesterday and I ran the Ubuntu CD and everything was fine, I rebooted the Computer and it started up! It was great!! Really quick and responsive and easy to use and i LOVE it's features...
My only problem is my Broadband. I live in Ireland and I have my broadband with o2, it's quick and sufficient for my needs. I have a Huawei E270 usb modem (It's wireless broadband). And it wouldn't Work. I plugged it into my pc with Ubuntu up and running and it opened the File for o2 rather than the Interface for it. When I plugged the modem in there was a green lock symbol on the top right of the screen. Is Ubuntu even compatible with the E270 modem?
